init: change file owners of sysfs nodes min_vrefresh and
idle_delay_ms in order to grant permission for hwcomposer
Bug: 213299701
Test: use the following commands
adb shell "vndservice call Exynos.HWCService 1005 i32 0 i32 30"
adb shell "vndservice call Exynos.HWCService 1006 i32 0 i32 1000"
Change-Id: I57043afd6ac08740775680505ee6f3247d56a956
* modify dev/logbuffer_tty16 to dev/logbuffer_tty18
Bug: 213759828
Test: 1. Enable Bluetooth in P22 devices and check uart log in
android.hardware.bluetooth@1.1::IBluetoothHci.txt
2. Enable Bluetooth in P21 devices and check uart log in
android.hardware.bluetooth@1.1::IBluetoothHci.txt
3. Fake bthal ssrdump and check the coredump log.
Change-Id: I208fae8e5ddf60d7df52311c32249bf3ac401dbc
What this patch does:
1. prepare zram size to increase 3G by property
2. set up zram writeback params
3. set up lmk filecahe_min_kb
Bug: 207572845
Bug: 207572250
Signed-off-by: Minchan Kim <minchan@google.com>
Change-Id: I5a3376268392ad1360586d2002e4a42feecd83ad
No longer need this script.
Bug: 207031989
Test: boot to home, make sure all f2fs partitions are mounted
Signed-off-by: Randall Huang <huangrandall@google.com>
Change-Id: I882084fb3a7cf1771e146d7d950ee4a5106792fe
uwb needs ACM port, create this function combination.
Bug: 209568585
Test: ACM port can be enabled.
Change-Id: I06107cc6ee42fc6b622a1aff25cbdd54b479ea0f
init.usb.configfs.rc has the same trigger condition of midi function.
Rename the config name to "charger" to avoid triggerring twice of the
midi function.
Bug: 188744218
Test: USB enumerated in charger mode
Signed-off-by: Kyle Tso <kyletso@google.com>
Change-Id: Ica112fb4be66356901f6d5f21b79b9e648d49f35
It needs a USB function in charger mode to set the charging current to
500mA/900mA.
Bug: 188744218
Test: charging at 900mA in charger mode
Signed-off-by: Kyle Tso <kyletso@google.com>
Change-Id: I95c98ecec30dd4394228f7290412c303771a3158
Currently, the property 'sys.usb.configfs' is set to 2, these settings
are not needed.
Bug: 209568585
Test: build pass
Change-Id: Icbf24f621e1d20ffc86228fc6d936cb9a1a7c4e5
The cancelling behavior in MTP has two behaviors.
1. cancel requests one by one
2. batch cancel all requests
This patch will set the property to true to enable
batch cancel all requests.
Bug: 181729410
Test: build pass
Change-Id: I546dad88e5e0c72c9bafdaded8e9026deccfbb88
Currently, USB gadgdet hal couldn't access configfs nodes during
device booting. The permission of configfs nodes are root as default,
and they are modified to system by init process. Therefore, USB
gadget HAL can't access them before permission changes completely.
The patch will modify permission of USB gadget hal so that it can
access configfs nodes without permission change.
Bug: 204378488
Test: check connection time
Change-Id: I97f5446a51183225227744043e4a6e0088fecf0b
Change local hbm node ownership to allow framework to access.
Bug: 205640231
Test: check ownership after boot
Signed-off-by: Shiyong Li <shiyongli@google.com>
Change-Id: Iba041a9cf8672682411f2167f8677b30e5979027
Added SPDX-license-identifier-Apache-2.0 to:
conf/Android.bp
Bug: 68860345
Bug: 151177513
Bug: 151953481
Test: m all
Change-Id: Ie09443987ffc0749d8400387415c7257c033ddb6
Add a file "fstab.gs201-fips" alongside the existing "fstab.gs201" in
order to specify different encryption settings in FIPS mode.
"androidboot.fstab_suffix=gs201-fips" on the kernel command line will be
used to select the FIPS fstab when needed.
As the two fstabs should be otherwise identical, generate them from a
template file so that they will stay in sync.
Note that generating the fstabs requires that they be installed as build
system modules rather than via PRODUCT_COPY_FILES, which results in the
vendor_ramdisk copy of the fstabs being installed to system/etc rather
than /. This shouldn't cause any problem, now that Android has been
updated to look for the fstab in this location too.
(cherry-pick from device/google/gs101)
Test: Boot to home screen with/without fips mode
Bug: 202417706
Signed-off-by: Konstantin Vyshetsky <vkon@google.com>
Change-Id: I8fdc1c9a91399816fa2d4c53f282d63e988ce7d5
high-group is running on CPU 6-7.
mid-group is running on CPU 4-5.
mid-high-gropu is running on CPU 4-7.
Move camera tasks to CPU 4-7 for 1 seconds when AP launch.
(cherry-pick from device/google/gs101)
Bug: 205010238
Bug: 194271751
Test: GCA
Change-Id: I8e13e9ad0057b8f42f8ed3958bf0c6d58a5a02bc
Prefer high cap will choose the mid / high cores when possible with
consideration of energy efficiency.
Running task on high cores with low clock is more efficient than running
at little core with high clock.
This hint also addresses CTS issues with keeping latency_sensitive = 1.
(equivalent to prefer idle)
This hint adds:
1) Enable prefer_high_cap of camera vendor group
2) Set high_capacity_start_cpu to 4
4) Set MemFreq floor
5) Change camera-daemon/cpu.uclamp.latency_sensitive owner to root
(cherry-pick from device/google/gs101)
Bug: 205010238
Bug: 186564130
Test:
android.hardware.camera2.cts.RobustnessTest#testAeAndAfCausality (5/5)
android.hardware.cts.CameraTest#testPreviewCallback (5/5)
android.hardware.camera2.cts.CameraDeviceTest#testCameraDeviceRepeatingBurst (5/5)
android.hardware.cts.CameraTest#testFocusDistances (3/6). (3/6) without CL.
*****************************************************************
raven Camera CTS Test Results
*****************************************************************
Tests Passed: 217, Failed: 0, Not found: 0, Status unknown: 0
Change-Id: Ia2abb0eb9c57fa05c4db7bf1d02053e303301781
This is not needed in device-specific init.rc file, because it's
is superseded by commit https://r.android.com/1866693.
Bug: 203720638
Test: presubmit
Change-Id: I74cfa6f3aa0c9125559f3241ed8e23f8a8510616
On userdebug & eng builds, change the owner/group of SJTAG sysfs files
that need to be written to 'system', so that BetterBug is able to write
these files.
Bug: 204381544
Test: Ensure that the writable files in the following directories have
'system' as their owner & group:
/sys/devices/platform/sjtag_ap/interface/
/sys/devices/platform/sjtag_gsa/interface/
Signed-off-by: Peter Csaszar <pcsaszar@google.com>
Change-Id: I1fd61f702960a266bc8a2f84d1a1358ccefe3c9c
Changed the ownership of gc segment info sysfs nodes for Pixelstats
to access these values.
Test: check the ownership of
/dev/sys/fs/by-name/userdata/<gc_segment_mode|gc_reclaimed_segments>
Bug: 201503046
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Ocean Chen <oceanchen@google.com>
Change-Id: I827538be0801cd8abc26b095df56849fd2ff141a
Currently the persist partition is formatted as ext4. In order to
convert the partition to f2fs without losing data, add a script which
will copy the partition contents out, format the partition as f2fs and
then copy the contents back.
Bug: 202511062
Signed-off-by: Konstantin Vyshetsky <vkon@google.com>
Change-Id: I89502694d1e02261902525c11ac875dd7756721b
A cherry pick from 49a13bf for gs101
Bug: 199252036
Test: Boot to home and usb hal bring up normally
Change-Id: Ia4e344aa9cf7762b71cbfe35ff9cbcccb4474b11
