Evolution-x-devices/device_google_gs201
2
0
Fork 0
mirror of https://github.com/Evolution-X-Devices/device_google_gs201 synced 2026-01-27 14:29:33 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
1c62b0111021552a0fcf73089a7d6c21991bad9c
device_google_gs201/device.mk
Jesse Hall 1c62b01110 device.mk: Collect and clean up gpu-related settings 
This is a port to gs201 of the original gs101 change.

Mostly this change just collects existing GPU-related settings into one
place so they can be found more easily. It also removes some vestigial
and redundant settings.

* Renderscript is deprecated and we never planned to include the RS HAL.
  But it was copied in (twice) from some previous device. Remove it and
  things that only the RS HAL depends on.
* The separate "*32" PRODUCT_PACKAGES entries were left over from when
  prebuilts had separate prebuilts modules for 32-bit and 64-bit
  variants of the package, instead of using a single multilib package.

Bug: 188672865
Test: boot to home, check all moved properties are still correct
Change-Id: I4b4088ffcec09b5b898eabe1710680dd3cc61959
2021-05-25 14:12:35 -07:00

1152 lines
39 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2011 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
TARGET_BOARD_PLATFORM := gs201
ifneq (,$(filter %_64,$(TARGET_PRODUCT)))
LOCAL_64ONLY := _64
endif
AB_OTA_POSTINSTALL_CONFIG += \
RUN_POSTINSTALL_system=true \
POSTINSTALL_PATH_system=system/bin/otapreopt_script \
FILESYSTEM_TYPE_system=ext4 \
POSTINSTALL_OPTIONAL_system=true
# Set Vendor SPL to match platform
VENDOR_SECURITY_PATCH = $(PLATFORM_SECURITY_PATCH)
PRODUCT_SOONG_NAMESPACES += \
hardware/google/av \
hardware/google/gchips \
hardware/google/graphics/common \
hardware/google/graphics/gs201 \
hardware/google/interfaces \
hardware/google/pixel \
device/google/gs201 \
vendor/google/whitechapel/tools \
vendor/google/interfaces \
vendor/google_devices/common/proprietary/confirmatioui_hal \
vendor/google_nos/host/android \
vendor/google_nos/test/system-test-harness
#vendor/broadcom/bluetooth \
#vendor/google/camera
DEVICE_USES_EXYNOS_GRALLOC_VERSION := 4
ifeq ($(TARGET_PREBUILT_KERNEL),)
LOCAL_KERNEL := $(TARGET_KERNEL_DIR)/Image.lz4
else
LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
endif
# OEM Unlock reporting
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
ro.oem_unlock_supported=1
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
#Set IKE logs to verbose for WFC
PRODUCT_PROPERTY_OVERRIDES += log.tag.IKE=VERBOSE
#Set Shannon IMS logs to debug
PRODUCT_PROPERTY_OVERRIDES += log.tag.SHANNON_IMS=DEBUG
#Set Shannon QNS logs to debug
PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS=DEBUG
PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-ims=DEBUG
PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-emergency=DEBUG
PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-mms=DEBUG
PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-xcap=DEBUG
PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-HC=DEBUG
endif
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
# b/36703476: Set default log size to 1M
PRODUCT_PROPERTY_OVERRIDES += \
ro.logd.size=1M
# b/114766334: persist all logs by default rotating on 30 files of 1MiB
PRODUCT_PROPERTY_OVERRIDES += \
logd.logpersistd=logcatd \
logd.logpersistd.size=30
endif
# From system.property
PRODUCT_PROPERTY_OVERRIDES += \
dev.usbsetting.embedded=on \
ro.telephony.default_network=27 \
persist.vendor.ril.use.iccid_to_plmn=1 \
persist.vendor.ril.emergencynumber.mode=5
#rild.libpath=/system/lib64/libsec-ril.so \
#rild.libargs=-d /dev/umts_ipc0
# SIT-RIL Logging setting
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.ril.log_mask=3 \
persist.vendor.ril.log.base_dir=/data/vendor/radio/sit-ril \
persist.vendor.ril.log.chunk_size=5242880 \
persist.vendor.ril.log.num_file=3
# Enable reboot free DSDS
PRODUCT_PRODUCT_PROPERTIES += \
persist.radio.reboot_on_modem_change=false
# Enable Early Camping
PRODUCT_PRODUCT_PROPERTIES += \
persist.vendor.ril.camp_on_earlier=1
# Carrier configuration default location
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.radio.config.carrier_config_dir=/mnt/vendor/modem_img/images/default/confpack
PRODUCT_PROPERTY_OVERRIDES += \
telephony.active_modems.max_count=2
USE_LASSEN_OEMHOOK := true
# Use for GRIL
USES_LASSEN_MODEM := true
ifeq ($(USES_GOOGLE_DIALER_CARRIER_SETTINGS),true)
USE_GOOGLE_DIALER := true
USE_GOOGLE_CARRIER_SETTINGS := true
endif
ifeq (,$(filter aosp_%,$(TARGET_PRODUCT)))
# Audio client implementation for RIL
#USES_GAUDIO := true
endif
# ######################
# GRAPHICS - GPU (begin)
# Must match BOARD_USES_SWIFTSHADER in BoardConfig.mk
USE_SWIFTSHADER := true
# HWUI
TARGET_USES_VULKAN = false
PRODUCT_SOONG_NAMESPACES += \
vendor/arm/mali/valhall \
vendor/arm/mali/valhall/cl \
vendor/arm/mali/valhall/libmali \
vendor/arm/mali/valhall/cinstr/production/gpu-hwc-reader
PRODUCT_PACKAGES += \
libGLES_mali \
vulkan.gs101 \
libOpenCL \
libgpudataproducer
# android.hardware.neuralnetworks@1.3-service-armnn \
ifeq ($(USE_SWIFTSHADER),true)
PRODUCT_PACKAGES += \
libGLESv1_CM_swiftshader \
libEGL_swiftshader \
libGLESv2_swiftshader
endif
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.opengles.aep.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.opengles.aep.xml \
frameworks/native/data/etc/android.hardware.vulkan.version-1_1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.version.xml \
frameworks/native/data/etc/android.hardware.vulkan.level-1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.level.xml \
frameworks/native/data/etc/android.hardware.vulkan.compute-0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.vulkan.compute.xml \
frameworks/native/data/etc/android.software.vulkan.deqp.level-2021-03-01.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.vulkan.deqp.level.xml \
frameworks/native/data/etc/android.software.opengles.deqp.level-2021-03-01.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.opengles.deqp.level.xml
ifeq ($(USE_SWIFTSHADER),true)
PRODUCT_VENDOR_PROPERTIES += \
ro.hardware.egl = swiftshader
else
PRODUCT_VENDOR_PROPERTIES += \
ro.hardware.egl = mali
endif
PRODUCT_VENDOR_PROPERTIES += \
ro.opengles.version=196610 \
graphics.gpu.profiler.support=true \
debug.renderengine.backend=gles
# GRAPHICS - GPU (end)
# ####################
# Device Manifest, Device Compatibility Matrix for Treble
ifeq ($(DEVICE_USES_EXYNOS_GRALLOC_VERSION), 4)
DEVICE_MANIFEST_FILE := \
device/google/gs201/manifest$(LOCAL_64ONLY).xml
else
DEVICE_MANIFEST_FILE := \
device/google/gs201/manifest$(LOCAL_64ONLY)-gralloc3.xml
endif
ifneq (,$(filter aosp_%,$(TARGET_PRODUCT)))
DEVICE_MANIFEST_FILE += \
device/google/gs201/manifest_media_aosp.xml
PRODUCT_COPY_FILES += \
device/google/gs201/media_codecs_aosp_c2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_c2.xml
else
DEVICE_MANIFEST_FILE += \
device/google/gs201/manifest_media.xml
PRODUCT_COPY_FILES += \
device/google/gs201/media_codecs_bo_c2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_c2.xml \
device/google/gs201/media_codecs_aosp_c2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_aosp_c2.xml
endif
DEVICE_MATRIX_FILE := \
device/google/gs201/compatibility_matrix.xml
DEVICE_PACKAGE_OVERLAYS += device/google/gs201/overlay
# This will be updated to 31 (Android S) for shipping
PRODUCT_SHIPPING_API_LEVEL := 30
# Temporarily disable the debugfs restriction on 31 (Android S)
PRODUCT_SET_DEBUGFS_RESTRICTIONS := false
# Enforce the Product interface
PRODUCT_PRODUCT_VNDK_VERSION := current
PRODUCT_ENFORCE_PRODUCT_PARTITION_INTERFACE := true
# Init files
PRODUCT_COPY_FILES += \
$(LOCAL_KERNEL):kernel \
device/google/gs201/conf/init.gs201.usb.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.gs201.usb.rc \
device/google/gs201/conf/ueventd.gs201.rc:$(TARGET_COPY_OUT_VENDOR)/ueventd.rc
PRODUCT_COPY_FILES += \
device/google/gs201/conf/init.gs201.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.gs201.rc
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_COPY_FILES += \
device/google/gs201/conf/init.debug.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.debug.rc
endif
# If AoC Daemon is not present on this build, load firmware at boot via rc
ifeq ($(wildcard vendor/google/whitechapel/aoc/aocd),)
PRODUCT_COPY_FILES += \
device/google/gs201/conf/init.aoc.nodaemon.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.aoc.rc
else
PRODUCT_COPY_FILES += \
device/google/gs201/conf/init.aoc.daemon.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.aoc.rc
endif
# Recovery files
PRODUCT_COPY_FILES += \
device/google/gs201/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.gs201.rc
# Fstab files
PRODUCT_COPY_FILES += \
device/google/gs201/conf/fstab.gs201:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.gs201 \
device/google/gs201/conf/fstab.persist:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.persist \
device/google/gs201/conf/fstab.gs201:$(TARGET_COPY_OUT_VENDOR_RAMDISK)/first_stage_ramdisk/fstab.gs201
# Shell scripts
PRODUCT_COPY_FILES += \
device/google/gs201/init.insmod.sh:$(TARGET_COPY_OUT_VENDOR)/bin/init.insmod.sh \
# insmod files
PRODUCT_COPY_FILES += \
device/google/gs201/init.insmod.gs201.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.gs201.cfg
# For creating dtbo image
PRODUCT_HOST_PACKAGES += \
mkdtimg
PRODUCT_PACKAGES += \
messaging
# Contexthub HAL
#PRODUCT_PACKAGES += \
# android.hardware.contexthub@1.2-service.generic
# CHRE tools
#ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
#PRODUCT_PACKAGES += \
# chre_power_test_client \
# chre_test_client
#endif
#PRODUCT_COPY_FILES += \
# frameworks/native/data/etc/android.hardware.context_hub.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.context_hub.xml
## Enable the CHRE Daemon
#CHRE_USF_DAEMON_ENABLED := true
#PRODUCT_PACKAGES += \
# chre \
# preloaded_nanoapps.json
# Filesystem management tools
PRODUCT_PACKAGES += \
linker.vendor_ramdisk \
tune2fs.vendor_ramdisk \
resize2fs.vendor_ramdisk
# Userdata Checkpointing OTA GC
PRODUCT_PACKAGES += \
checkpoint_gc
# CP Logging properties
PRODUCT_PROPERTY_OVERRIDES += \
ro.vendor.sys.modem.logging.loc = /data/vendor/slog \
persist.vendor.sys.silentlog.tcp = "On" \
ro.vendor.cbd.modem_removable = "1" \
ro.vendor.cbd.modem_type = "s5100sit" \
persist.vendor.sys.modem.logging.br_num=5 \
persist.vendor.sys.modem.logging.enable=true
# Enable silent CP crash handling
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.ril.crash_handling_mode=1
# Add support dual SIM mode
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.radio.multisim_switch_support=true
# RPMB TA
PRODUCT_PACKAGES += \
tlrpmb
# Touch firmware
#PRODUCT_COPY_FILES += \
device/google/gs201/firmware/touch/s6sy761.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/s6sy761.fw
# Touch
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml
# Sensors
#PRODUCT_COPY_FILES += \
# frameworks/native/data/etc/android.hardware.sensor.accelerometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.accelerometer.xml \
# frameworks/native/data/etc/android.hardware.sensor.barometer.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.barometer.xml \
# frameworks/native/data/etc/android.hardware.sensor.compass.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.compass.xml \
# frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.gyroscope.xml \
# frameworks/native/data/etc/android.hardware.sensor.hifi_sensors.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.hifi_sensors.xml \
# frameworks/native/data/etc/android.hardware.sensor.light.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.light.xml\
# frameworks/native/data/etc/android.hardware.sensor.proximity.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.proximity.xml \
# frameworks/native/data/etc/android.hardware.sensor.stepcounter.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepcounter.xml \
# frameworks/native/data/etc/android.hardware.sensor.stepdetector.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.stepdetector.xml
# Add sensor HAL 2.1 product packages
#PRODUCT_PACKAGES += android.hardware.sensors@2.1-service.multihal
# Add sensor HAL 1.0 product packages.
PRODUCT_PACKAGES += \
android.hardware.sensors@1.0-impl \
android.hardware.sensors@1.0-service \
sensors.cloudripper
# USB HAL
PRODUCT_PACKAGES += \
android.hardware.usb@1.3-service.gs201
# MIDI feature
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.software.midi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.midi.xml
# default usb debug functions
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.usb.usbradio.config=dm
endif
# Power HAL
PRODUCT_COPY_FILES += \
device/google/gs201/powerhint.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json
# adpf 16ms update rate
PRODUCT_PRODUCT_PROPERTIES += \
vendor.powerhal.adpf.rate=16666666
# FIXME: b/170650323
PRODUCT_PRODUCT_PROPERTIES += \
vendor.powerhal.adpf.uclamp=0
PRODUCT_COPY_FILES += \
device/google/gs201/task_profiles.json:$(TARGET_COPY_OUT_VENDOR)/etc/task_profiles.json
PRODUCT_COPY_FILES += \
device/google/gs201/powerhint_a0.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint_a0.json
PRODUCT_COPY_FILES += \
device/google/gs201/powerhint_a1.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint_a1.json
-include hardware/google/pixel/power-libperfmgr/aidl/device.mk
# PowerStats HAL
PRODUCT_PACKAGES += \
android.hardware.power.stats-service.pixel
# dumpstate HAL
PRODUCT_PACKAGES += \
android.hardware.dumpstate@1.1-service.gs201
# AoC support
PRODUCT_PACKAGES += \
aocd \
aocutil \
aoc_audio_cfg \
vp_util
# AoC debug support
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += \
aocdump
endif
#
# Audio HALs
#
# Audio Configurations
USE_LEGACY_LOCAL_AUDIO_HAL := false
USE_XML_AUDIO_POLICY_CONF := 1
## Enable AAudio MMAP/NOIRQ data path.
#PRODUCT_PROPERTY_OVERRIDES += aaudio.mmap_policy=2
#PRODUCT_PROPERTY_OVERRIDES += aaudio.mmap_exclusive_policy=2
#PRODUCT_PROPERTY_OVERRIDES += aaudio.hw_burst_min_usec=2000
# Calliope firmware overwrite
#PRODUCT_COPY_FILES += \
device/google/gs201/firmware/calliope_dram.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/calliope_dram.bin \
device/google/gs201/firmware/calliope_sram.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/calliope_sram.bin \
device/google/gs201/firmware/calliope_dram_2.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/calliope_dram_2.bin \
device/google/gs201/firmware/calliope_sram_2.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/calliope_sram_2.bin \
device/google/gs201/firmware/calliope2.dt:$(TARGET_COPY_OUT_VENDOR)/firmware/calliope2.dt \
# Cannot reference variables defined in BoardConfig.mk, uncomment this if
# BOARD_USE_OFFLOAD_AUDIO and BOARD_USE_OFFLOAD_EFFECT are true
## AudioEffectHAL library
#PRODUCT_PACKAGES += \
# libexynospostprocbundle
# Cannot reference variables defined in BoardConfig.mk, uncomment this if
# BOARD_USE_SOUNDTRIGGER_HAL is true
#PRODUCT_PACKAGES += \
# sound_trigger.primary.maran9820
# A-Box Service Daemon
#PRODUCT_PACKAGES += main_abox
# Libs
PRODUCT_PACKAGES += \
com.android.future.usb.accessory
# for now include gralloc here. should come from hardware/google_devices/exynos5
ifeq ($(DEVICE_USES_EXYNOS_GRALLOC_VERSION), 4)
PRODUCT_PACKAGES += \
android.hardware.graphics.mapper@4.0-impl \
android.hardware.graphics.allocator@4.0-service \
android.hardware.graphics.allocator@4.0-impl
else
PRODUCT_PACKAGES += \
android.hardware.graphics.mapper@2.0-impl \
android.hardware.graphics.allocator@2.0-service \
android.hardware.graphics.allocator@2.0-impl \
gralloc.$(TARGET_BOARD_PLATFORM)
endif
# AIDL memtrack
PRODUCT_PACKAGES += \
android.hardware.memtrack-service.example
PRODUCT_PACKAGES += \
memtrack.$(TARGET_BOARD_PLATFORM) \
libion_exynos \
libion
PRODUCT_PACKAGES += \
libhwjpeg
# Video Editor
PRODUCT_PACKAGES += \
VideoEditorGoogle
# WideVine modules
PRODUCT_PACKAGES += \
android.hardware.drm@1.4-service.clearkey \
android.hardware.drm@1.4-service.widevine \
liboemcrypto \
ORIOLE_PRODUCT := %oriole
RAVEN_PRODUCT := %raven
ifneq (,$(filter $(ORIOLE_PRODUCT), $(TARGET_PRODUCT)))
LOCAL_TARGET_PRODUCT := oriole
else ifneq (,$(filter $(RAVEN_PRODUCT), $(TARGET_PRODUCT)))
LOCAL_TARGET_PRODUCT := raven
else
LOCAL_TARGET_PRODUCT := slider
endif
SOONG_CONFIG_NAMESPACES += lyric
SOONG_CONFIG_lyric += use_lyric_camera_hal
SOONG_CONFIG_lyric_use_lyric_camera_hal := true
SOONG_CONFIG_NAMESPACES += google3a_config
SOONG_CONFIG_google3a_config += \
soc \
gcam_awb \
ghawb_truetone \
target_device
SOONG_CONFIG_google3a_config_soc := gs201
SOONG_CONFIG_google3a_config_gcam_awb := true
SOONG_CONFIG_google3a_config_ghawb_truetone := true
SOONG_CONFIG_google3a_config_target_device := $(LOCAL_TARGET_PRODUCT)
SOONG_CONFIG_NAMESPACES += gch
SOONG_CONFIG_gch += feature
# Disable Legacy common hal modules for whi
SOONG_CONFIG_gch_feature := use_lyric_hal
# WiFi
PRODUCT_PACKAGES += \
android.hardware.wifi@1.0-service \
wificond \
libwpa_client \
WifiOverlay \
# Connectivity
PRODUCT_PACKAGES += \
ConnectivityOverlay
PRODUCT_PACKAGES_DEBUG += \
sg_write_buffer \
f2fs_io \
check_f2fs \
f2fsstat \
f2fs.fibmap \
dump.f2fs
# Storage health HAL
PRODUCT_PACKAGES += \
android.hardware.health.storage-service.default
# storage pixelstats
-include hardware/google/pixel/pixelstats/device.mk
# Enable project quotas and casefolding for emulated storage without sdcardfs
$(call inherit-product, $(SRC_TARGET_DIR)/product/emulated_storage.mk)
$(call inherit-product, $(SRC_TARGET_DIR)/product/virtual_ab_ota/launch_with_vendor_ramdisk.mk)
# Enforce generic ramdisk allow list
$(call inherit-product, $(SRC_TARGET_DIR)/product/generic_ramdisk.mk)
# Titan-M
ifeq (,$(filter true, $(BOARD_WITHOUT_DTLS)))
include hardware/google/pixel/dauntless/dauntless.mk
endif
PRODUCT_PACKAGES_DEBUG += \
WvInstallKeybox
# Copy Camera HFD Setfiles
#PRODUCT_COPY_FILES += \
device/google/gs201/firmware/camera/libhfd/default_configuration.hfd.cfg.json:$(TARGET_COPY_OUT_VENDOR)/firmware/default_configuration.hfd.cfg.json \
device/google/gs201/firmware/camera/libhfd/pp_cfg.json:$(TARGET_COPY_OUT_VENDOR)/firmware/pp_cfg.json \
device/google/gs201/firmware/camera/libhfd/tracker_cfg.json:$(TARGET_COPY_OUT_VENDOR)/firmware/tracker_cfg.json \
device/google/gs201/firmware/camera/libhfd/WithLightFixNoBN.SDNNmodel:$(TARGET_COPY_OUT_VENDOR)/firmware/WithLightFixNoBN.SDNNmodel
#PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.wifi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.xml \
frameworks/native/data/etc/android.hardware.wifi.direct.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.direct.xml \
frameworks/native/data/etc/android.hardware.wifi.aware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.aware.xml \
frameworks/native/data/etc/android.hardware.wifi.passpoint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.passpoint.xml \
frameworks/native/data/etc/android.hardware.wifi.rtt.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.rtt.xml \
frameworks/native/data/etc/android.hardware.usb.host.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.host.xml \
frameworks/native/data/etc/android.hardware.usb.accessory.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.accessory.xml
#PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.flash-autofocus.xml \
frameworks/native/data/etc/android.hardware.camera.front.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.front.xml \
frameworks/native/data/etc/android.hardware.camera.concurrent.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.concurrent.xml \
frameworks/native/data/etc/android.hardware.camera.full.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.full.xml\
frameworks/native/data/etc/android.hardware.camera.raw.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.camera.raw.xml\
#PRODUCT_COPY_FILES += \
frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml \
frameworks/native/data/etc/android.hardware.wifi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.xml \
frameworks/native/data/etc/android.hardware.wifi.direct.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.direct.xml \
frameworks/native/data/etc/android.hardware.wifi.passpoint.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.wifi.passpoint.xml \
frameworks/native/data/etc/android.hardware.usb.host.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.host.xml \
frameworks/native/data/etc/android.hardware.usb.accessory.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.usb.accessory.xml \
frameworks/native/data/etc/android.hardware.audio.low_latency.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.low_latency.xml \
frameworks/native/data/etc/android.hardware.audio.pro.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.audio.pro.xml \
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.software.ipsec_tunnels.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.ipsec_tunnels.xml \
PRODUCT_PROPERTY_OVERRIDES += \
debug.slsi_platform=1 \
debug.hwc.winupdate=1
# hw composer HAL
PRODUCT_PACKAGES += \
libdisplaycolor \
hwcomposer.$(TARGET_BOARD_PLATFORM)
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += displaycolor_service
endif
PRODUCT_PROPERTY_OVERRIDES += \
debug.sf.disable_backpressure=0 \
debug.sf.enable_gl_backpressure=1
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.use_phase_offsets_as_durations=1
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.late.sf.duration=8300000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.late.app.duration=20500000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.early.sf.duration=16000000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.early.app.duration=16500000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.earlyGl.sf.duration=13500000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.earlyGl.app.duration=21000000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.set_idle_timer_ms=80
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.set_touch_timer_ms=200
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.set_display_power_timer_ms=1000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.use_content_detection_for_refresh_rate=true
# Must align with HAL types Dataspace
# The data space of wide color gamut composition preference is Dataspace::DISPLAY_P3
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.wcg_composition_dataspace=143261696
# Display
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.has_wide_color_display=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.has_HDR_display=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.use_color_management=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.protected_contents=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.display_update_imminent_timeout_ms=50
# force to blend in P3 mode
PRODUCT_PROPERTY_OVERRIDES += \
persist.sys.sf.native_mode=2 \
persist.sys.sf.color_mode=9
PRODUCT_COPY_FILES += \
device/google/gs201/display/display_colordata_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_cal0.pb
# limit DPP downscale ratio
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.hwc.dpp.downscale=2
# Cannot reference variables defined in BoardConfig.mk, uncomment this if
# BOARD_USES_EXYNOS_DSS_FEATURE is true
## set the dss enable status setup
#PRODUCT_PROPERTY_OVERRIDES += \
# ro.exynos.dss=1
# Cannot reference variables defined in BoardConfig.mk, uncomment this if
# BOARD_USES_EXYNOS_AFBC_FEATURE is true
# set the dss enable status setup
PRODUCT_PROPERTY_OVERRIDES += \
ro.vendor.ddk.set.afbc=1
PRODUCT_CHARACTERISTICS := nosdcard
# WPA SUPPLICANT
PRODUCT_COPY_FILES += \
device/google/gs201/wifi/p2p_supplicant.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant.conf \
device/google/gs201/wifi/wpa_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf
# WIFI COEX
PRODUCT_COPY_FILES += \
device/google/gs201/wifi/coex_table.xml:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/coex_table.xml
PRODUCT_PACKAGES += hostapd
PRODUCT_PACKAGES += wpa_supplicant
PRODUCT_PACKAGES += wpa_supplicant.conf
WIFI_PRIV_CMD_UPDATE_MBO_CELL_STATUS := enabled
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += wpa_cli
PRODUCT_PACKAGES += hostapd_cli
endif
####################################
## VIDEO
####################################
SOONG_CONFIG_NAMESPACES += bigo
SOONG_CONFIG_bigo += soc
SOONG_CONFIG_bigo_soc := gs201
# MFC firmware
PRODUCT_COPY_FILES += \
device/google/gs201/firmware/mfc_fw_v14.2.bin:$(TARGET_COPY_OUT_VENDOR)/firmware/mfc_fw.bin
# 1. Codec 2.0
# exynos service
PRODUCT_SOONG_NAMESPACES += vendor/samsung_slsi/codec2
PRODUCT_COPY_FILES += \
device/google/gs201/media_codecs_performance_c2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_performance_c2.xml \
PRODUCT_PACKAGES += \
samsung.hardware.media.c2@1.0-service \
codec2.vendor.base.policy \
codec2.vendor.ext.policy \
libExynosC2ComponentStore \
libExynosC2H264Dec \
libExynosC2H264Enc \
libExynosC2HevcDec \
libExynosC2HevcEnc \
libExynosC2Mpeg4Dec \
libExynosC2Mpeg4Enc \
libExynosC2H263Dec \
libExynosC2H263Enc \
libExynosC2Vp8Dec \
libExynosC2Vp8Enc \
libExynosC2Vp9Dec \
libExynosC2Vp9Enc
PRODUCT_PROPERTY_OVERRIDES += \
debug.c2.use_dmabufheaps=1 \
media.c2.dmabuf.padding=512 \
debug.stagefright.ccodec_delayed_params=1
# 2. OpenMAX IL
PRODUCT_COPY_FILES += \
device/google/gs201/media_codecs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs.xml \
device/google/gs201/media_codecs_performance.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_performance.xml
####################################
# Telephony
#PRODUCT_COPY_FILES += \
frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_telephony.xml
# CBD (CP booting deamon)
CBD_USE_V2 := true
CBD_PROTOCOL_SIT := true
# setup dalvik vm configs.
$(call inherit-product, frameworks/native/build/phone-xhdpi-2048-dalvik-heap.mk)
PRODUCT_TAGS += dalvik.gc.type-precise
# Exynos OpenVX framework
PRODUCT_PACKAGES += \
libexynosvision
ifeq ($(TARGET_USES_CL_KERNEL),true)
PRODUCT_PACKAGES += \
libopenvx-opencl
endif
#GPS_CHIPSET := 47765
#
#PRODUCT_COPY_FILES += \
# frameworks/native/data/etc/android.hardware.location.gps.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.location.gps.xml \
# device/google/gs201/gnss/${GPS_CHIPSET}/config/gps.xml:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml \
# device/google/gs201/gnss/${GPS_CHIPSET}/config/lhd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
# device/google/gs201/gnss/${GPS_CHIPSET}/config/scd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf \
# device/google/gs201/gnss/${GPS_CHIPSET}/config/gps.cer:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.cer \
# device/google/gs201/gnss/${GPS_CHIPSET}/firmware/SensorHub.patch:$(TARGET_COPY_OUT_VENDOR)/firmware/SensorHub.patch
#
#PRODUCT_SOONG_NAMESPACES += \
# device/google/gs201/gnss/$(GPS_CHIPSET)
#
#PRODUCT_PACKAGES += \
# android.hardware.gnss@2.1-impl-google \
# gps.default \
# flp.default \
# gpsd \
# lhd \
# scd \
# android.hardware.gnss@2.1-service-brcm
#PRODUCT_PACKAGES_DEBUG += \
# init.gps_log.rc
# Trusty (KM, GK, Storage)
#$(call inherit-product, system/core/trusty/trusty-storage.mk)
#$(call inherit-product, system/core/trusty/trusty-base.mk)
# Trusty unit test tool
#PRODUCT_PACKAGES_DEBUG += trusty-ut-ctrl
# Trusty ConfirmationUI HAL
#PRODUCT_PACKAGES += \
# android.hardware.confirmationui@1.0-service.trusty.vendor
# Trusty Secure DPU Daemon
#PRODUCT_PACKAGES += \
# securedpud.slider
# Trusty Metrics Daemon
#PRODUCT_SOONG_NAMESPACES += \
# vendor/google/trusty/common
#
#PRODUCT_PACKAGES += \
# trusty_metricsd
PRODUCT_PACKAGES += \
android.hardware.graphics.composer@2.4-impl \
android.hardware.graphics.composer@2.4-service
# Storage: for factory reset protection feature
PRODUCT_PROPERTY_OVERRIDES += \
ro.frp.pst=/dev/block/by-name/frp
# Bluetooth HAL
PRODUCT_PACKAGES += \
android.hardware.bluetooth@1.1-service.bcmbtlinux \
# bt_vendor.conf
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.bluetooth.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth.xml \
frameworks/native/data/etc/android.hardware.bluetooth_le.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.bluetooth_le.xml
# System props to enable Bluetooth Quality Report (BQR) feature
#ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
#PRODUCT_PRODUCT_PROPERTIES += \
# persist.bluetooth.bqr.event_mask=262174 \
# persist.bluetooth.bqr.min_interval_ms=500
#else
#PRODUCT_PRODUCT_PROPERTIES += \
# persist.bluetooth.bqr.event_mask=30 \
# persist.bluetooth.bqr.min_interval_ms=500
#endif
#VNDK
PRODUCT_PACKAGES += \
vndk-libs
PRODUCT_ENFORCE_RRO_TARGETS := \
framework-res
# Dynamic Partitions
PRODUCT_USE_DYNAMIC_PARTITIONS := true
# Use FUSE passthrough
PRODUCT_PRODUCT_PROPERTIES += \
persist.sys.fuse.passthrough.enable=true
# Use /product/etc/fstab.postinstall to mount system_other
PRODUCT_PRODUCT_PROPERTIES += \
ro.postinstall.fstab.prefix=/product
PRODUCT_COPY_FILES += \
device/google/gs201/conf/fstab.postinstall:$(TARGET_COPY_OUT_PRODUCT)/etc/fstab.postinstall
# fastbootd
PRODUCT_PACKAGES += \
android.hardware.fastboot@1.1-impl.pixel \
fastbootd
#google iwlan
PRODUCT_PACKAGES += \
Iwlan
#Iwlan test app for userdebug/eng builds
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PACKAGES += \
IwlanTestApp
endif
PRODUCT_PACKAGES += \
whitelist \
libstagefright_hdcp \
libskia_opt
#PRODUCT_PACKAGES += \
mfc_fw.bin \
calliope_sram.bin \
calliope_dram.bin \
calliope_iva.bin \
vts.bin
# This will be called only if IMSService is building with source code for dev branches.
$(call inherit-product-if-exists, vendor/samsung_slsi/telephony/shannon-ims/device-vendor.mk)
PRODUCT_PACKAGES += ShannonIms
$(call inherit-product-if-exists, vendor/samsung_slsi/telephony/shannon-iwlan/device-vendor.mk)
$(call inherit-product-if-exists, vendor/samsung_slsi/telephony/packetrouter/device-vendor.mk)
#RCS Test Messaging App
PRODUCT_PACKAGES_DEBUG += \
TestRcsApp
PRODUCT_PACKAGES += ShannonRcs
# Boot Control HAL
PRODUCT_PACKAGES += \
android.hardware.boot@1.2-impl-gs201 \
android.hardware.boot@1.2-service-gs201
# Exynos RIL and telephony
# Multi SIM(DSDS)
SIM_COUNT := 2
SUPPORT_MULTI_SIM := true
# Support NR
SUPPORT_NR := true
# Using IRadio 1.6
USE_RADIO_HAL_1_6 := true
#$(call inherit-product, vendor/google_devices/telephony/common/device-vendor.mk)
#$(call inherit-product, vendor/google_devices/gs201/proprietary/device-vendor.mk)
ifneq ($(BOARD_WITHOUT_RADIO),true)
$(call inherit-product-if-exists, vendor/samsung_slsi/telephony/common/device-vendor.mk)
endif
ifeq (,$(filter %_64,$(TARGET_PRODUCT)))
$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
else
$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit_only.mk)
endif
#$(call inherit-product, hardware/google_devices/exynos5/exynos5.mk)
#$(call inherit-product-if-exists, hardware/google_devices/gs201/gs201.mk)
#$(call inherit-product-if-exists, vendor/google_devices/common/exynos-vendor.mk)
#$(call inherit-product-if-exists, hardware/broadcom/wlan/bcmdhd/firmware/bcm4375/device-bcm.mk)
#$(call inherit-product-if-exists, vendor/google/sensors/usf/android/usf_efw_product.mk)
#$(call inherit-product-if-exists, vendor/google/services/LyricCameraHAL/src/build/device-vendor.mk)
#$(call inherit-product-if-exists, vendor/google/camera/devices/whi/device-vendor.mk)
PRODUCT_COPY_FILES += \
device/google/gs201/default-permissions.xml:$(TARGET_COPY_OUT_PRODUCT)/etc/default-permissions/default-permissions.xml \
device/google/gs201/component-overrides.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sysconfig/component-overrides.xml \
frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml \
# modem_svc_sit daemon
PRODUCT_PACKAGES += modem_svc_sit
# modem logging binary/configs
PRODUCT_PACKAGES += modem_logging_control
PRODUCT_COPY_FILES += \
device/google/gs201/radio/gnss_blanking.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/gnss_blanking.csv
# ARM NN files
ARM_COMPUTE_CL_ENABLE := 1
# Vibrator Diag
PRODUCT_PACKAGES_DEBUG += \
diag-vibrator \
diag-vibrator-cs40l25a \
diag-vibrator-drv2624 \
$(NULL)
# NFC
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
frameworks/native/data/etc/android.hardware.nfc.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.uicc.xml \
frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml
PRODUCT_PACKAGES += \
NfcNci \
Tag \
android.hardware.nfc@1.2-service.st
# SecureElement
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml
PRODUCT_PACKAGES += \
android.hardware.health@2.1-impl-gs201 \
android.hardware.health@2.1-service
# Audio
# Audio HAL Server & Default Implementations
PRODUCT_PACKAGES += \
android.hardware.audio.service \
android.hardware.audio@7.0-impl \
android.hardware.audio.effect@7.0-impl \
android.hardware.soundtrigger@2.3-impl \
# android.hardware.bluetooth.audio@2.1-impl \
# vendor.google.whitechapel.audio.audioext@2.0-impl
#
##Audio HAL libraries
#PRODUCT_PACKAGES += \
# audio.primary.$(TARGET_BOARD_PLATFORM) \
# audio.platform.aoc \
# sound_trigger.primary.$(TARGET_BOARD_PLATFORM) \
# audio_bt_aoc \
# audio_tunnel_aoc \
# aoc_aud_ext \
# libaoctuningdecoder \
# libaoc_waves \
# liboffloadeffect \
# audio_waves_aoc \
# audio_fortemedia_aoc \
# audio_bluenote_aoc \
# audio_usb_aoc \
# audio_spk_35l41 \
# audio.usb.default \
# audio.a2dp.default \
# audio.bluetooth.default \
# audio.r_submix.default \
# libamcsextfile \
# audio_amcs_ext \
#
#
##Audio Vendor libraries
#PRODUCT_PACKAGES += \
# libfvsam_prm_parser \
# libmahalcontroller \
# libAlgFx_HiFi3z
#
## AudioHAL Configurations
PRODUCT_COPY_FILES += \
frameworks/av/services/audiopolicy/config/a2dp_audio_policy_configuration_7_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/a2dp_audio_policy_configuration_7_0.xml \
frameworks/av/services/audiopolicy/config/a2dp_in_audio_policy_configuration_7_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/a2dp_in_audio_policy_configuration_7_0.xml \
frameworks/av/services/audiopolicy/config/hearing_aid_audio_policy_configuration_7_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/hearing_aid_audio_policy_configuration_7_0.xml \
frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/r_submix_audio_policy_configuration.xml \
frameworks/av/services/audiopolicy/config/usb_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/usb_audio_policy_configuration.xml \
frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_volumes.xml \
frameworks/av/services/audiopolicy/config/default_volume_tables.xml:$(TARGET_COPY_OUT_VENDOR)/etc/default_volume_tables.xml \
# frameworks/av/services/audiopolicy/config/bluetooth_audio_policy_configuration_7_0.xml:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_audio_policy_configuration_7_0.xml \
##Audio soong
#PRODUCT_SOONG_NAMESPACES += \
# vendor/google/whitechapel/audio/hal \
# vendor/google/whitechapel/audio/interfaces
#
#SOONG_CONFIG_NAMESPACES += aoc_audio_board
#SOONG_CONFIG_aoc_audio_board += \
# platform
#
#SOONG_CONFIG_aoc_audio_board_platform := $(TARGET_BOARD_PLATFORM)
#
## Audio properties
#PRODUCT_PROPERTY_OVERRIDES += \
# ro.config.vc_call_vol_steps=7 \
# ro.config.media_vol_steps=25 \
# ro.audio.monitorRotation = true \
# ro.audio.offload_wakelock=false
# vndservicemanager and vndservice no longer included in API 30+, however needed by vendor code.
# See b/148807371 for reference
PRODUCT_PACKAGES += vndservicemanager
PRODUCT_PACKAGES += vndservice
## TinyTools, debug tool and cs35l41 speaker calibration tool for Audio
#ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
#PRODUCT_PACKAGES += \
# tinyplay \
# tinycap \
# tinymix \
# tinypcminfo \
# tinyhostless \
# cplay \
# aoc_hal \
# aoc_tuning_inft \
# crus_sp_cal \
# mahal_test \
# ma_aoc_tuning_test
#endif
PRODUCT_PACKAGES += \
google.hardware.media.c2@1.0-service \
libgc2_store \
libgc2_base \
libgc2_av1_dec \
libbo_av1 \
libgc2_cwl \
libgc2_utils
## Start packet router
#PRODUCT_PROPERTY_OVERRIDES += vendor.pktrouter=1
# Thermal HAL
include hardware/google/pixel/thermal/device.mk
PRODUCT_PROPERTY_OVERRIDES += persist.vendor.enable.thermal.genl=true
## TPU firmware
#PRODUCT_PACKAGES += \
# edgetpu-abrolhos.fw
#
## TPU NN HAL
#PRODUCT_PACKAGES += \
# android.hardware.neuralnetworks@1.3-service-darwinn
#
## TPU NN AIDL HAL
#PRODUCT_PACKAGES += \
# android.hardware.neuralnetworks@service-darwinn-aidl
#
## TPU logging service
#PRODUCT_PACKAGES += \
# android.hardware.edgetpu.logging@service-edgetpu-logging
#
## TPU application service
#PRODUCT_PACKAGES += \
# vendor.google.edgetpu@1.0-service
#
## TPU vendor service
#PRODUCT_PACKAGES += \
# vendor.google.edgetpu_vendor_service@1.0-service
#
## TPU HAL client library
#PRODUCT_PACKAGES += \
# libedgetpu_client.google
#
## TPU metrics logger library
#PRODUCT_PACKAGES += \
# libmetrics_logger
# Connectivity Thermal Power Manager
PRODUCT_PACKAGES += \
ConnectivityThermalPowerManager
# A/B support
PRODUCT_PACKAGES += \
otapreopt_script \
cppreopts.sh \
update_engine \
update_engine_sideload \
update_verifier
# tetheroffload HAL
PRODUCT_PACKAGES += \
vendor.samsung_slsi.hardware.tetheroffload@1.0-service
# pKVM
ifeq ($(TARGET_PKVM_ENABLED),true)
$(call inherit-product, packages/modules/Virtualization/apex/product_packages.mk)
endif
# Enable watchdog timeout loop breaker.
PRODUCT_PROPERTY_OVERRIDES += \
framework_watchdog.fatal_window.second=600 \
framework_watchdog.fatal_count=3
# Enable zygote critical window.
PRODUCT_PROPERTY_OVERRIDES += \
zygote.critical_window.minute=10
# Suspend properties
PRODUCT_PROPERTY_OVERRIDES += \
suspend.short_suspend_threshold_millis=5000
# (b/183612348): Enable skia reduceOpsTaskSplitting
PRODUCT_PROPERTY_OVERRIDES += \
renderthread.skia.reduceopstasksplitting=true
# Enable Incremental on the device
PRODUCT_PROPERTY_OVERRIDES += \
ro.incremental.enable=true
# Project
include hardware/google/pixel/common/pixel-common-device.mk
# Pixel Logger
include hardware/google/pixel/PixelLogger/PixelLogger.mk
# Battery Stats Viewer
PRODUCT_PACKAGES_DEBUG += BatteryStatsViewer
# Install product specific framework compatibility matrix
# (TODO: b/169535506) This includes the FCM for system_ext and product partition.
# It must be split into the FCM of each partition.
DEVICE_PRODUCT_COMPATIBILITY_MATRIX_FILE := device/google/gs201/device_framework_matrix_product.xml
Reference in New Issue View Git Blame Copy Permalink