#
# Copyright 2017 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

PRODUCT_AAPT_CONFIG := normal
PRODUCT_AAPT_PREF_CONFIG := 560dpi
PRODUCT_AAPT_PREBUILT_DPI := xxxhdpi xxhdpi xhdpi hdpi

PRODUCT_HARDWARE := taimen

# DEVICE_PACKAGE_OVERLAYS for the device should be before
# including common overlays since the one listed first
# takes precedence.
ifdef DEVICE_PACKAGE_OVERLAYS
$(warning Overlays defined in '$(DEVICE_PACKAGE_OVERLAYS)' will override '$(PRODUCT_HARDWARE)' overlays)
endif
DEVICE_PACKAGE_OVERLAYS += device/google/taimen/overlay

# Audio
PRODUCT_COPY_FILES += \
    device/google/taimen/default_volume_tables.xml:$(TARGET_COPY_OUT_VENDOR)/etc/default_volume_tables.xml \
    device/google/taimen/audio_policy_volumes.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_volumes.xml

include device/google/wahoo/device.mk

PRODUCT_COPY_FILES += \
    device/google/taimen/init-taimen.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init-$(PRODUCT_HARDWARE).rc \
    device/google/taimen/init.taimen.usb.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.$(PRODUCT_HARDWARE).usb.rc

PRODUCT_PROPERTY_OVERRIDES += \
    ro.sf.lcd_density=560 \

# Kernel Modules Config
PRODUCT_COPY_FILES += \
    device/google/taimen/init.insmod.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.cfg

# Logging
PRODUCT_COPY_FILES += \
    device/google/taimen/init.logging.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.$(PRODUCT_HARDWARE).logging.rc


PRODUCT_COPY_FILES += \
    device/google/taimen/nfc/libnfc-nxp.taimen.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nxp.conf

PRODUCT_COPY_FILES += \
    device/google/taimen/thermal-engine.conf:$(TARGET_COPY_OUT_VENDOR)/etc/thermal-engine.conf \
    device/google/taimen/thermal-engine.conf:$(TARGET_COPY_OUT_VENDOR)/etc/thermal-engine-vr.conf

# Audio
PRODUCT_COPY_FILES += \
    device/google/taimen/mixer_paths_tavil.xml:$(TARGET_COPY_OUT_VENDOR)/etc/mixer_paths_tavil_taimen.xml \
    device/google/taimen/audio_platform_info_tavil.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_platform_info_tavil_taimen.xml

# Bug 62375603
PRODUCT_PROPERTY_OVERRIDES += audio.adm.buffering.ms=4

# Wifi configuration file
PRODUCT_COPY_FILES += \
    device/google/taimen/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/firmware/wlan/qca_cld/WCNSS_qcom_cfg.ini

# Enable modem logging
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PROPERTY_OVERRIDES += \
    persist.sys.modem.diag.mdlog=true \
    ro.radio.log_loc="/data/vendor/modem_dump" \
    ro.radio.log_prefix="modem_log_"
endif

#IMU calibration
PRODUCT_PROPERTY_OVERRIDES += \
  persist.config.calibration_fac=/persist/sensors/calibration/calibration.xml

# Vibrator HAL
PRODUCT_PROPERTY_OVERRIDES += \
  ro.vibrator.hal.click.duration=10 \
  ro.vibrator.hal.tick.duration=4

# HWUI common settings
PRODUCT_PROPERTY_OVERRIDES += \
    ro.hwui.gradient_cache_size=1 \
    ro.hwui.drop_shadow_cache_size=6 \
    ro.hwui.r_buffer_cache_size=8 \
    ro.hwui.texture_cache_flushrate=0.4 \
    ro.hwui.text_small_cache_width=1024 \
    ro.hwui.text_small_cache_height=1024 \
    ro.hwui.text_large_cache_width=2048 \
    ro.hwui.text_large_cache_height=1024 \
    ro.hwui.texture_cache_size=84 \
    ro.hwui.layer_cache_size=64 \
    ro.hwui.path_cache_size=32