Files
device_google_wahoo/BoardConfig.mk
Yueyao Zhu a18de9021d Enable charger mode
1) device.mk: add charger_res_images to PRODUCT_PACKAGES
to use the default charger mode images
2) init.hardware.rc: configure charger service class
3) BoardConfig.mk: enable suspend in charger mode

Bug: 36046603
Change-Id: I3652a69784b8ecd4e670f26fdd66b7c68d578f9f
Signed-off-by: Yueyao Zhu <yueyao@google.com>
2017-03-14 16:44:37 -07:00

116 lines
3.4 KiB
Makefile

#
# Copyright (C) 2016 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
TARGET_BOARD_PLATFORM := msm8998
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-a
TARGET_CPU_ABI := arm64-v8a
TARGET_CPU_ABI2 :=
TARGET_CPU_VARIANT := generic
TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv7-a-neon
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi
TARGET_2ND_CPU_VARIANT := cortex-a9
BOARD_KERNEL_CMDLINE += androidboot.hardware=$(TARGET_BOOTLOADER_BOARD_NAME) androidboot.console=ttyMSM0
BOARD_KERNEL_CMDLINE += user_debug=31 msm_rtb.filter=0x37 ehci-hcd.park=3
BOARD_KERNEL_CMDLINE += androidboot.selinux=permissive service_locator.enable=1
BOARD_KERNEL_CMDLINE += swiotlb=2048
BOARD_KERNEL_CMDLINE += firmware_class.path=/vendor/etc/firmware
BOARD_KERNEL_CMDLINE += no_console_suspend=1
BOARD_KERNEL_BASE := 0x00000000
BOARD_KERNEL_PAGESIZE := 4096
BOARD_KERNEL_TAGS_OFFSET := 0x01E00000
BOARD_RAMDISK_OFFSET := 0x02000000
TARGET_NO_BOOTLOADER := true
TARGET_NO_KERNEL := false
TARGET_NO_RECOVERY := true
TARGET_RECOVERY_FSTAB := device/google/wahoo/fstab.hardware
BOARD_USES_RECOVERY_AS_BOOT := true
BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
ENABLE_CPUSETS := true
TARGET_COPY_OUT_VENDOR := vendor
BOARD_HAL_STATIC_LIBRARIES := libdumpstate.$(TARGET_BOOTLOADER_BOARD_NAME)
# Install odex files into the other system image
BOARD_USES_SYSTEM_OTHER_ODEX := true
BOARD_ROOT_EXTRA_FOLDERS := persist firmware
BOARD_SEPOLICY_DIRS += device/google/wahoo/sepolicy
TARGET_ANDROID_FILESYSTEM_CONFIG_H := device/google/wahoo/android_filesystem_config.h
QCOM_BOARD_PLATFORMS += msm8998
BOARD_HAVE_BLUETOOTH_QCOM := true
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/google/wahoo/bluetooth
# Camera
TARGET_USES_AOSP := true
BOARD_QTI_CAMERA_32BIT_ONLY := true
CAMERA_DAEMON_NOT_PRESENT := true
TARGET_USES_ION := true
TARGET_USES_PAINTBOX := true
# GPS
TARGET_NO_RPC := true
BOARD_VENDOR_QCOM_GPS_LOC_API_HARDWARE := default
BOARD_VENDOR_QCOM_LOC_PDK_FEATURE_SET := true
# Sensors
USE_SENSOR_MULTI_HAL := true
# wlan
BOARD_WLAN_DEVICE := qcwcn
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
BOARD_HOSTAPD_DRIVER := NL80211
WIFI_DRIVER_DEFAULT := qca_cld3
WPA_SUPPLICANT_VERSION := VER_0_8_X
WIFI_DRIVER_FW_PATH_STA := "sta"
WIFI_DRIVER_FW_PATH_AP := "ap"
WIFI_DRIVER_FW_PATH_P2P := "p2p"
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
# Audio
BOARD_USES_ALSA_AUDIO := true
USE_XML_AUDIO_POLICY_CONF := 1
AUDIO_FEATURE_ENABLED_MULTI_VOICE_SESSIONS := true
AUDIO_FEATURE_ENABLED_SND_MONITOR := true
BOARD_ROOT_EXTRA_SYMLINKS := /vendor/lib/dsp:/dsp
# Include whaoo modules
USES_DEVICE_GOOGLE_WAHOO := true
# Graphics
TARGET_USES_GRALLOC1 := true
TARGET_USES_HWC2 := true
# Display
TARGET_HAS_WIDE_COLOR_DISPLAY := true
TARGET_HAS_HDR_DISPLAY := false
# Charger Mode
BOARD_CHARGER_ENABLE_SUSPEND := true