diff --git a/Android.mk b/Android.mk deleted file mode 100644 index 5bf51ae..0000000 --- a/Android.mk +++ /dev/null @@ -1,19 +0,0 @@ -# -# Copyright 2016 The Android Open Source Project -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -ifneq ($(filter muskie walleye, $(TARGET_DEVICE)),) - include $(call first-makefiles-under, $(call my-dir)) -endif diff --git a/CommonBoardConfig.mk b/CommonBoardConfig.mk deleted file mode 100644 index 55c4289..0000000 --- a/CommonBoardConfig.mk +++ /dev/null @@ -1,107 +0,0 @@ -# -# Copyright (C) 2016 The Android Open-Source Project -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -TARGET_BOARD_PLATFORM := msm8998 - -TARGET_ARCH := arm64 -TARGET_ARCH_VARIANT := armv8-a -TARGET_CPU_ABI := arm64-v8a -TARGET_CPU_ABI2 := -TARGET_CPU_VARIANT := generic - -TARGET_2ND_ARCH := arm -TARGET_2ND_ARCH_VARIANT := armv7-a-neon -TARGET_2ND_CPU_ABI := armeabi-v7a -TARGET_2ND_CPU_ABI2 := armeabi -TARGET_2ND_CPU_VARIANT := cortex-a9 - -BOARD_KERNEL_CMDLINE += console=ttyMSM0,115200,n8 earlycon=msm_serial_dm,0xc1b0000 -BOARD_KERNEL_CMDLINE += androidboot.hardware=$(TARGET_BOOTLOADER_BOARD_NAME) androidboot.console=ttyMSM0 -BOARD_KERNEL_CMDLINE += user_debug=31 msm_rtb.filter=0x37 ehci-hcd.park=3 -BOARD_KERNEL_CMDLINE += lpm_levels.sleep_disabled=1 sched_enable_hmp=1 sched_enable_power_aware=1 -BOARD_KERNEL_CMDLINE += androidboot.selinux=permissive service_locator.enable=1 -BOARD_KERNEL_CMDLINE += swiotlb=2048 -BOARD_KERNEL_CMDLINE += firmware_class.path=/vendor/etc/firmware -BOARD_KERNEL_CMDLINE += no_console_suspend=1 - -BOARD_KERNEL_BASE := 0x00000000 -BOARD_KERNEL_PAGESIZE := 4096 -BOARD_KERNEL_TAGS_OFFSET := 0x01E00000 -BOARD_RAMDISK_OFFSET := 0x02000000 - -TARGET_NO_BOOTLOADER := true -TARGET_NO_KERNEL := false -TARGET_NO_RECOVERY := true -TARGET_RECOVERY_FSTAB := device/google/muskie/fstab.hardware -BOARD_USES_RECOVERY_AS_BOOT := true -BOARD_BUILD_SYSTEM_ROOT_IMAGE := true - -ENABLE_CPUSETS := true - -TARGET_COPY_OUT_VENDOR := vendor - -BOARD_HAL_STATIC_LIBRARIES := libdumpstate.$(TARGET_BOOTLOADER_BOARD_NAME) - -# Install odex files into the other system image -BOARD_USES_SYSTEM_OTHER_ODEX := true - -BOARD_ROOT_EXTRA_FOLDERS := persist firmware - -BOARD_SEPOLICY_DIRS += device/google/muskie/sepolicy - -QCOM_BOARD_PLATFORMS += msm8998 -BOARD_HAVE_BLUETOOTH_QCOM := true -BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/google/muskie/bluetooth - -# Camera -TARGET_USES_AOSP := true -BOARD_QTI_CAMERA_32BIT_ONLY := true -CAMERA_DAEMON_NOT_PRESENT := true -TARGET_USES_ION := true -TARGET_USES_PAINTBOX := true - -# GPS -TARGET_NO_RPC := true -BOARD_VENDOR_QCOM_GPS_LOC_API_HARDWARE := default -BOARD_VENDOR_QCOM_LOC_PDK_FEATURE_SET := true - -# Sensors -USE_SENSOR_MULTI_HAL := true - -# wlan -BOARD_WLAN_DEVICE := qcwcn -BOARD_WPA_SUPPLICANT_DRIVER := NL80211 -BOARD_HOSTAPD_DRIVER := NL80211 -WIFI_DRIVER_DEFAULT := qca_cld3 -WPA_SUPPLICANT_VERSION := VER_0_8_X -WIFI_DRIVER_FW_PATH_STA := "sta" -WIFI_DRIVER_FW_PATH_AP := "ap" -WIFI_DRIVER_FW_PATH_P2P := "p2p" -BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE) -BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE) - -# Audio -BOARD_USES_ALSA_AUDIO := true -USE_XML_AUDIO_POLICY_CONF := 1 -AUDIO_FEATURE_ENABLED_MULTI_VOICE_SESSIONS := true -AUDIO_FEATURE_ENABLED_SND_MONITOR := true -AUDIO_FEATURE_ENABLED_USB_TUNNEL := true -BOARD_ROOT_EXTRA_SYMLINKS := /vendor/lib/dsp:/dsp - -# Graphics -TARGET_USES_GRALLOC1 := true - --include vendor/google_devices/muskie/BoardConfigVendor.mk diff --git a/WCNSS_qcom_cfg.ini b/WCNSS_qcom_cfg.ini deleted file mode 100644 index fa5a03f..0000000 --- a/WCNSS_qcom_cfg.ini +++ /dev/null @@ -1,594 +0,0 @@ -# This file allows user to override the factory -# defaults for the WLAN Driver - -############################################# -# STA related general configurations -############################################# -# Assigned MAC Addresses - This will be used until NV items are in place -# Each byte of MAC address is represented in Hex format as XX -Intf0MacAddress=000AF58989FF -Intf1MacAddress=000AF58989FE -Intf2MacAddress=000AF58989FD -Intf3MacAddress=000AF58989FC - -#Channel Bonding -gChannelBondingMode5GHz=1 -gChannelBondingMode24GHz=0 - -#Enable Keep alive with non-zero period value -gStaKeepAlivePeriod = 30 - -# Maximum MPDU length (VHT only. Valid values: 0->3895 octets, 1->7991 octets, 2->11454 octets) -gVhtMpduLen=2 - -# 0 for OLPC 1 for CLPC and SCPC -gEnableCloseLoop=1 - -ImplicitQosIsEnabled=0 - -# Enable Tx beamforming in VHT20MHz -# Valid values are 0,1. If commented out, the default value is 0. -# 0=disable, 1=enable -gEnableTxBFin20MHz=1 - -#Enable/Disable SU Tx beamformer support. -gEnableTxSUBeamformer=1 - -# 1=enable tx STBC; 0=disable -gEnableTXSTBC=1 - -# 1=enable STBC; 0=disable STBC -gEnableRXSTBC=1 - -# 1=enable rx LDPC; 0=disable -gEnableRXLDPC=1 - -# Flag to allow STA send AddTspec even when ACM is Off -gAddTSWhenACMIsOff=1 - -# RTS threshold -RTSThreshold=1048576 - -# 802.11d support -g11dSupportEnabled=0 - - -# Phy Mode (auto, b, g, n, etc) -# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac -# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only -# 7 = 11b only 8 = 11ac only. -gDot11Mode=0 - -# Enable Rx handling options -# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium) -rx_mode=4 - -#Enable VHT on 2.4Ghz -gEnableVhtFor24GHzBand=1 - -# Regulatory Setting; 0=STRICT; 1=CUSTOM -gRegulatoryChangeCountry=1 - -# userspace country code setting shld take priority -gCountryCodePriority=1 - -# Enable/Disable LPASS support -# 0 to disable, 1 to enable -gEnableLpassSupport=1 - -# Enable(1)/Disable(0) SIFS burst -gEnableSifsBurst=1 - -# Tx Chain Mask for CCK -gCckChainMaskEnable=1 - -# Tx Chain Mask for 1SS -gTxChainMask1ss=0 - -# TPC power -gSelfGenFrmPwr=3 - -################ NAN feature set start ################### -# Enable or Disable NAN -# 1=Enable (default), 0=Disable -gEnableNanSupport=1 -################ NAN feature set end ##################### - -gIgnorePeerHTopMode=1 -gIgnorePeerErpInfo=1 - -# 802.11n Protection flag -gEnableApProt=1 - -# Fixed Rate -gFixedRate=0 - -# Intra-BSS forward -gDisableIntraBssFwd=0 - -# WMM Enable/Disable -WmmIsEnabled=0 - -# 802.11h support -g11hSupportEnabled=1 - -#Short Guard Interval Enable/disable -gShortGI20Mhz=1 -gShortGI40Mhz=1 - -#Auto Shutdown wlan : Value in Seconds. 0 means disabled. Max 1 day = 86400 sec -gWlanAutoShutdown=0 - -#Preferred band (both or 2.4 only or 5 only) -BandCapability=0 - -gVhtChannelWidth=2 - -# Enable Tx beamforming -gTxBFEnable=1 - -# Set txchainmask and rxchainmask -# These parameters are used only if gEnable2x2 is 0 -# Valid values are 1,2 -# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0. -# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1. -gSetTxChainmask1x1=1 -gSetRxChainmask1x1=1 - -#If set to 0, MCC is not allowed. -gEnableMCCMode=1 - -# MCC to SCC Switch mode: 0-Disable 1-Enable 2-Force SCC if same band -gWlanMccToSccSwitchMode = 0 - -# Maximum Receive AMPDU size (VHT only. Valid values: 0->8k 1->16k 2->32k 3->64k 4->128k) -gVhtAmpduLenExponent=7 - -# Maximum number of concurrent connections -gMaxConcurrentActiveSessions=3 - -# Radar PRI multiplier -gDFSradarMappingPriMultiplier=4 - -# Enable or Disable Multi-user MIMO -# 1=Enable (default), 0=Disable -gEnableMuBformee=1 - -# Enable to check FW hash if secure FW feature is enabled. It's for defconfig -# builds only since it will be ignored in performance/release builds. -gEnableFWHashCheck=1 - -# Enable or Disable MCC Adaptive Scheduler at the FW -# 1=Enable (default), 0=Disable -gEnableMCCAdaptiveScheduler=1 - -# Disable/Enable GreenAP -# 0 to disable, 1 to enable, default: 1 -gEnableGreenAp=0 - -################ Datapath feature set Begin ################ -# Bus bandwidth threshold values in terms of number of packets -gBusBandwidthHighThreshold=2000 -gBusBandwidthMediumThreshold=500 -gBusBandwidthLowThreshold=150 - -# Bus bandwidth compute timeout value in ms -gBusBandwidthComputeInterval=100 - -# VHT Tx/Rx MCS values -# Valid values are 0,1,2. If commented out, the default value is 0. -# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 -gVhtRxMCS=2 -gVhtTxMCS=2 - -# VHT Tx/Rx MCS values for 2x2 -# Valid values are 0,1,2. If commented out, the default value is 0. -# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 -gEnable2x2=1 -gVhtRxMCS2x2=2 -gVhtTxMCS2x2=2 - -#IPA config is a bit mask and following are the configurations. -#bit0 IPA Enable -#bit1 IPA PRE Filter enable -#bit2 IPv6 enable -#bit3 IPA Resource Manager (RM) enable -#bit4 IPA Clock scaling enable -#bit5 IPA uC ENABLE -#bit6 IPA uC STA ENABLE -#bit8 IPA Real Time Debugging -gIPAConfig=0x7d -gIPADescSize=800 - -# Enable/Disable RX full reorder offload -gReorderOffloadSupported=1 - -# Enable CE classification -# 1 - enable(default) 0 - disable -gCEClassifyEnable=1 - -# Enable(Tx) fastpath for data traffic. -# 1 - enable(default) 0 - disable -gEnableFastPath=1 - -# This flag enables IP, TCP and UDP checksum offload -# 1 - enable(default) 0 - disable -gEnableIpTcpUdpChecksumOffload=1 - -# Enable TCP Segmentation Offload -# 1 - enable 0 - disable -TSOEnable=1 - -# Enable Large Recieve Offload -# 1 - enable(default) 0 - disable -LROEnable=1 - -# Enable HT MPDU Density -# 4 for 2 micro sec -ght_mpdu_density=4 - -# Enable flow steering to enable multiple CEs for Rx flows. -# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs. -# Parallel Rx paths. -# 1 - enable 0 - disable(default) -gEnableFlowSteering=1 - -################ Datapath feature set End ################ - -############################################# -# SCAN related configurations -############################################# -# Enable/Disable Idle Scan -gEnableIdleScan=0 - -#Enable Scan Results Aging based on timer -#Timer value is in seconds -#If Set to 0 it will not enable the feature -gScanAgingTime=0 - -#Enable Scan Results Aging based on number of scans -gScanResultAgeCount=1 - -#Enable thermal mitigation -gThermalMitigationEnable=0 - -#List of Country codes for which 11ac needs to be disabled -#Each country code must be delimited by comma(,) -gListOfNon11acCountryCode=RU,UA,ZA - -#Maximum Channel time in msec -gMaxMediumTime=6000 - -# Scan Timing Parameters -# gPassiveMaxChannelTime=110 -# gPassiveMinChannelTime=60 -gActiveMaxChannelTime=40 -gActiveMinChannelTime=20 - -gPNOScanSupport=1 - -# Perform PNO fast scan this many number of times -gPNOScanTimerRepeatValue=6 - -# PNO slow scan period = gPNOSlowScanMultiplier times PNO fast scan period -# Example: fast scan period is passed from framework (default = 10 sec), then -# PNO slow scan period = 60 sec. -gPNOSlowScanMultiplier=6 - -# Enable or Disable Extended Scan (GScan) -# 1=Enable (default), 0=Disable -gExtScanEnable=1 - -#If set will start with active scan after driver load, otherwise will start with -#passive scan to find out the domain -gEnableBypass11d=1 - -#If set to 0, will not scan DFS channels -gEnableDFSChnlScan=1 - -#Maxium Channel time in msec -gMaxMediumTime = 6000 - -adaptive_dwell_mode_enabled=1 - -hostscan_adaptive_dwell_mode=1 - -adapt_dwell_lpf_weight=80 - -adapt_dwell_wifi_act_threshold=10 - - -############################################# -# Power related configurations -############################################# -# Enable IMPS or not -gEnableImps=1 - -# Enable BMPS or not -gEnableBmps=1 - -# Increase sleep duration (seconds) during IMPS -# 0 implies no periodic wake up from IMPS. Periodic wakeup is -# unnecessary if Idle Scan is disabled. -gImpsModSleepTime=0 - -# UAPSD service interval for VO,VI, BE, BK traffic -InfraUapsdVoSrvIntv=0 -InfraUapsdViSrvIntv=0 -InfraUapsdBeSrvIntv=0 -InfraUapsdBkSrvIntv=0 - -# Enable suspend or not -# 1: Enable standby, 2: Enable Deep sleep, 3: Enable Mcast/Bcast Filter -gEnableSuspend=3 - -#Enable Power Save offload -gEnablePowerSaveOffload=5 - -# Enable Runtime PM Feature. -# Enabling this feature will put target wow and shutdown pcie link -# when inactivity is detected in WLAN Driver. -# This feature is inactive when beaconing interfaces are active with -# clients associated. -# 0 - disable -# 1 - enable -gRuntimePM=1 - -# When gRuntimePM is disabled gRuntimeAutoTime won't take effect. -# The Time is in msec. -# 100 is min, 10000 is max, 500 is default. -gRuntimePMDelay=500 - -#Enable Power saving mechanism Based on Android Framework -#If set to 0 Driver internally control the Power saving mechanism -#If set to 1 Android Framwrok control the Power saving mechanism -isAndroidPsEn=0 - -beaconEarlyTerminationWakeInterval=3 - -#Data Inactivity Timeout when in powersave (in ms) -gDataInactivityTimeout=200 - -# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode -gIbssTxSpEndInactivityTime=10 - -gEnableModulatedDTIM=2 -gMaxLIModulatedDTIM=6 - -############################################# -# Roaming related configurations -############################################# -# CSR Roaming Enable(1) Disable(0) -gRoamingTime=0 - -# ESE Support and fast transition -EseEnabled=1 - -gNeighborLookupThreshold=76 -gNeighborReassocThreshold=81 -gNeighborScanTimerPeriod=200 -gNeighborScanChannelMinTime=20 -gNeighborScanChannelMaxTime=30 -gMaxNeighborReqTries=3 - -# To enable, set gRoamIntraBand=1 (Roaming within band) -# To disable, set gRoamIntraBand=0 (Roaming across band) -gRoamIntraBand=0 - -# Legacy (non-ESE, non-802.11r) Fast Roaming Support -# To enable, set FastRoamEnabled=1 -# To disable, set FastRoamEnabled=0 -FastRoamEnabled=1 - -#Check if the AP to which we are roaming is better than current AP in terms of RSSI. -#Checking is disabled if set to Zero.Otherwise it will use this value as to how better -#the RSSI of the new/roamable AP should be for roaming -RoamRssiDiff=3 - -# If the RSSI of any available candidate is better than currently associated -# AP by at least gImmediateRoamRssiDiff, then being to roam immediately (without -# registering for reassoc threshold). -# NOTE: Value of 0 means that we would register for reassoc threshold. -gImmediateRoamRssiDiff=10 - -# 802.11K support -gRrmEnable=1 -gRrmOperChanMax=8 -gRrmNonOperChanMax=8 - -gEnableFastRoamInConcurrency=1 - -# Enable/Disable Roaming Offload Support (a.k.a Key Management Offload) -# 0 to disable, 1 to enable -gRoamOffloadEnabled=0 - -gAllowDFSChannelRoam=1 - -############################################# -# Offload related configurations -############################################# -# Beacon filtering frequency (unit in beacon intervals) -gNthBeaconFilter=50 - -# Enable WAPI or not -# WAPIIsEnabled=0 -# Flags to filter Mcast abd Bcast RX packets. -# Value 0: No filtering, 1: Filter all Multicast. -# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast -McastBcastFilter=3 - -#Flag to enable HostARPOffload feature or not -hostArpOffload=1 - -#Flag to enable TCPChkSumOffld feature or not -gEnableTCPChkSumOffld=1 - -#Flag to enable HostNSOffload feature or not -hostNSOffload=1 - -#Flag to enable IPChkSumOffld feature or not -gEnableIPChecksumOffload=1 - -# controlling the following offload patterns -# through ini parameter. Default value is 1 -# to disable set it to zero. ssdp = 0 -# Setup multicast pattern for mDNS 224.0.0.251, -# SSDP 239.255.255.250 and LLMNR 224.0.0.252 -ssdp = 0 - -#Enable MC address filtering offload -gMCAddrListEnable=1 - -# Enable Active mode offload -gActiveModeOffload=1 - -# Enable Active mode offload -gEnableActiveModeOffload=1 - -# WOW Enable/Disable. -# 0 - Disable both magic pattern match and pattern byte match. -# 1 - Enable magic pattern match on all interfaces. -# 2 - Enable pattern byte match on all interfaces. -# 3 - Enable both magic patter and pattern byte match on all interfaces. -# Default value of gEnableWoW is 3. -# gEnableWoW=0 - - -############################################# -# Logging related configurations -############################################# -gEnableLogp=1 - -gEnableSelfRecovery=1 - -#Enable firmware log -gEnablefwlog=1 -# Additional firmware log levels -gFwDebugLogLevel=4 -gFwDebugModuleLoglevel=1,0,2,0,4,0,5,0,6,0,7,4,8,0,9,0,11,0,13,0,17,0,18,0,19,0,27,0,29,0,31,0,35,0,36,0,38,0 - -#Enable firmware uart print -gEnablefwprint=0 - -############################################# -# TDLS related configurations -############################################# -# Enable support for TDLS -# 0 - disable -# 1 - enable -gEnableTDLSSupport=1 - -# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall -# initiate TDLS Discovery towards a peer whenever setup criteria (throughput -# and RSSI) is met and then will initiate teardown when teardown criteria -# (idle packet count and RSSI) is met. -# 0 - disable -# 1 - enable -gEnableTDLSImplicitTrigger=1 - -# Enable TDLS External Control. That is, user space application has to -# first configure a peer MAC in wlan driver towards which TDLS is desired. -# Device will establish TDLS only towards those configured peers whenever -# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS -# when teardown criteria (idle packet count and RSSI) is met. However, -# device will accept TDLS connection if it is initiated from any other peer, -# even if that peer is not configured. -# 0 - disable -# 1 - enable -# For TDLS External Control, Implicit Trigger must also be enabled. -gTDLSExternalControl=1 - -# Enable support for TDLS off-channel operation -# 0 - disable -# 1 - enable -# TDLS off-channel operation will be invoked when there is only one -# TDLS connection. -gEnableTDLSOffChannel=1 - -gEnableTDLSScan=1 -gTDLSTxStatsPeriod=500 -gTDLSTxPacketThreshold=10 -gTDLSIdlePacketThreshold=1 - -############################################# -# P2P related configurations -############################################# -#P2P Listen offload -gEnableP2pListenOffload=1 - -#Enable or Disable p2p device address administered -isP2pDeviceAddrAdministrated=0 - -#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds). -#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link is idle for last 10 seconds.) -#For both active and power save clients. - -#Power save clients: DUT set TIM bit from 10th second onwards and till client honors TIM bit. -#If doesn't honor for 5 seconds then DUT remove client. - -#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not success still we try on -#11th second if not tries on 12th and so on till 15th second. Hence before disconnection DUT will send 5 NULL frames. -#Hence in any case DUT will detect client got removed in (10+5) seconds. i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod).. - -#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and it is period -#where we send NULL frame. - -#gApLinkMonitorPeriod = 10 -#gGoLinkMonitorPeriod = 10 - -#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame are succeed to send or not. -#Hence total effective detection time is gGoLinkMonitorPeriod+ gGoKeepAlivePeriod/gApLinkMonitorPeriod+ gApKeepAlivePeriod. -gGoKeepAlivePeriod = 20 -gApKeepAlivePeriod = 20 - -############################################# -# SAP related configurations -############################################# -#Enable OBSS protection -gEnableApOBSSProt=1 - -#Enable/Disable UAPSD for SoftAP -gEnableApUapsd=1 - -# SAP auto channel selection configuration -# 0 = disable auto channel selection -# 1 = enable auto channel selection, channel provided by supplicant will be ignored -gApAutoChannelSelection=0 - -#SOFTAP Channel Range selection -gAPChannelSelectStartChannel=1 -gAPChannelSelectEndChannel=11 - -# SAP Country code -# Default Country Code is 2 bytes, 3rd byte is optional indoor or out door. -# Example -# US Indoor, USI -# Korea Outdoor, KRO -# Japan without optional byte, JP -# France without optional byte, FR -#gAPCntryCode=USI - -# DFS Master Capability -gEnableDFSMasterCap=1 - -# Disable 11AC for hotspot -gSapForce11NFor11AC=1 - -#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled -gAPAutoShutOff=0 - -# Remove Overlap channel restriction -gEnableOverLapCh=0 - -# Enable/Disable channel avoidance for SAP in SCC scenario -# 0 - disable -# 1 - enable -gSapSccChanAvoidance=0 - -#Enable/Disable Tx beamformee in SAP mode -gEnableTxBFeeSAP=1 - - -END - -# Note: Configuration parser would not read anything past the END marker diff --git a/android_filesystem_config.h b/android_filesystem_config.h deleted file mode 100644 index a28ce04..0000000 --- a/android_filesystem_config.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * Copyright (C) 2016 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -/* This file is used to define the properties of the filesystem -** images generated by build tools (mkbootfs and mkyaffs2image) and -** by the device side of adb. -*/ - -#include - -static const struct fs_path_config android_device_dirs[] = { - { 00771, AID_SYSTEM, AID_SYSTEM, 0, "bt_firmware"}, -}; - -/* Rules for files. -** These rules are applied based on "first match", so they -** should start with the most specific path and work their -** way up to the root. Prefixes ending in * denotes wildcard -** and will allow partial matches. -*/ -static const struct fs_path_config android_device_files[] = { - { 00755, AID_SYSTEM, AID_SYSTEM, (1ULL << CAP_NET_BIND_SERVICE), "vendor/bin/pm-service" }, - { 00755, AID_SYSTEM, AID_SYSTEM, (1ULL << CAP_NET_BIND_SERVICE), "vendor/bin/cnss-daemon"}, -#ifdef NO_ANDROID_FILESYSTEM_CONFIG_DEVICE_DIRS - { 00000, AID_ROOT, AID_ROOT, 0, "system/etc/fs_config_dirs" }, -#endif -}; diff --git a/aosp_muskie.mk b/aosp_muskie.mk index cda3879..a58e333 100644 --- a/aosp_muskie.mk +++ b/aosp_muskie.mk @@ -29,7 +29,6 @@ PRODUCT_MODEL := AOSP on muskie PRODUCT_MANUFACTURER := Google PRODUCT_RESTRICT_VENDOR_FILES := all -$(call inherit-product, device/google/muskie/utils.mk) $(call inherit-product, device/google/muskie/device-muskie.mk) $(call inherit-product-if-exists, vendor/google_devices/muskie/device-vendor-muskie.mk) diff --git a/aosp_walleye.mk b/aosp_walleye.mk index 3cb3004..2d12d04 100644 --- a/aosp_walleye.mk +++ b/aosp_walleye.mk @@ -29,7 +29,6 @@ PRODUCT_MODEL := AOSP on walleye PRODUCT_MANUFACTURER := Google PRODUCT_RESTRICT_VENDOR_FILES := all -$(call inherit-product, device/google/muskie/utils.mk) $(call inherit-product, device/google/muskie/device-walleye.mk) $(call inherit-product-if-exists, vendor/google_devices/muskie/device-vendor-walleye.mk) diff --git a/audio_platform_info.xml b/audio_platform_info.xml deleted file mode 100644 index dcc1649..0000000 --- a/audio_platform_info.xml +++ /dev/null @@ -1,74 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/audio_platform_info_tavil.xml b/audio_platform_info_tavil.xml deleted file mode 100644 index 7a87904..0000000 --- a/audio_platform_info_tavil.xml +++ /dev/null @@ -1,65 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/audio_policy_configuration.xml b/audio_policy_configuration.xml deleted file mode 100644 index 0cb59e7..0000000 --- a/audio_policy_configuration.xml +++ /dev/null @@ -1,181 +0,0 @@ - - - - - - - - - - Speaker - Earpiece - Telephony Tx - Built-In Mic - Built-In Back Mic - Telephony Rx - - Speaker - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/bluetooth/bdroid_buildcfg.h b/bluetooth/bdroid_buildcfg.h deleted file mode 100644 index 82283a5..0000000 --- a/bluetooth/bdroid_buildcfg.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * - * Copyright (c) 2013, The Linux Foundation. All rights reserved. - * Not a Contribution, Apache license notifications and license are retained - * for attribution purposes only. - * - * Copyright (C) 2012 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef _BDROID_BUILDCFG_H -#define _BDROID_BUILDCFG_H -#define BTM_DEF_LOCAL_NAME "QCOM-BTD" -// Disables read remote device feature -#define BTA_SKIP_BLE_READ_REMOTE_FEAT FALSE -#define MAX_ACL_CONNECTIONS 7 -#define MAX_L2CAP_CHANNELS 16 -#define BLE_VND_INCLUDED TRUE -// skips conn update at conn completion -#define BTA_BLE_SKIP_CONN_UPD FALSE -#define BLE_PERIPHERAL_ADV_NAME FALSE -#define BT_CLEAN_TURN_ON_DISABLED 1 -#endif diff --git a/board-info.txt b/board-info.txt index c1f52f3..a017da8 100644 --- a/board-info.txt +++ b/board-info.txt @@ -1 +1 @@ -require board=muskie +require board=muskie|walleye diff --git a/device-common.mk b/device-common.mk deleted file mode 100644 index d43d998..0000000 --- a/device-common.mk +++ /dev/null @@ -1,365 +0,0 @@ -# -# Copyright (C) 2016 The Android Open-Source Project -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -LOCAL_PATH := device/google/muskie - -QCPATH := vendor/qcom/msm8998/proprietary -SRC_MEDIA_HAL_DIR := hardware/qcom/media/msm8998 -SRC_DISPLAY_HAL_DIR := hardware/qcom/display/msm8998 -SRC_CAMERA_HAL_DIR := hardware/qcom/camera/msm8998 - -TARGET_SYSTEM_PROP := $(LOCAL_PATH)/system.prop - -# Get kernel-headers -$(call inherit-product, hardware/qcom/msm8998/msm8998.mk) - -ifeq ($(TARGET_PREBUILT_KERNEL),) - LOCAL_KERNEL := device/google/muskie-kernel/Image.lz4-dtb -else - LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL) -endif - -PRODUCT_CHARACTERISTICS := nosdcard -PRODUCT_SHIPPING_API_LEVEL := 24 - -DEVICE_PACKAGE_OVERLAYS := $(LOCAL_PATH)/overlay - -PRODUCT_COPY_FILES += \ - $(LOCAL_KERNEL):kernel \ - $(LOCAL_PATH)/fstab.hardware:root/fstab.$(PRODUCT_HARDWARE) \ - $(LOCAL_PATH)/init.recovery.hardware.rc:root/init.recovery.$(PRODUCT_HARDWARE).rc \ - $(LOCAL_PATH)/init.hardware.rc:root/init.$(PRODUCT_HARDWARE).rc \ - $(LOCAL_PATH)/init.hardware.usb.rc:root/init.$(PRODUCT_HARDWARE).usb.rc \ - $(LOCAL_PATH)/ueventd.hardware.rc:root/ueventd.$(PRODUCT_HARDWARE).rc \ - $(LOCAL_PATH)/init.radio.sh:system/bin/init.radio.sh \ - -ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) - PRODUCT_COPY_FILES += \ - $(LOCAL_PATH)/init.hardware.diag.rc.userdebug:root/init.$(PRODUCT_HARDWARE).diag.rc -else - PRODUCT_COPY_FILES += \ - $(LOCAL_PATH)/init.hardware.diag.rc.user:root/init.$(PRODUCT_HARDWARE).diag.rc -endif - -BOARD_KERNEL_PAGESIZE := 4096 -BOARD_FLASH_BLOCK_SIZE := 131072 -BOARD_SYSTEMIMAGE_PARTITION_SIZE := 2147483648 -TARGET_USERIMAGES_USE_EXT4 := true -BOARD_PERSISTIMAGE_PARTITION_SIZE := 33554432 -BOARD_PERSISTIMAGE_FILE_SYSTEM_TYPE := ext4 -BOARD_VENDORIMAGE_PARTITION_SIZE := 419430400 -BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4 - -MSM_VIDC_TARGET_LIST := msm8998 # Get the color format from kernel headers -MASTER_SIDE_CP_TARGET_LIST := msm8998 # ION specific settings - -# Vendor Interface Manifest -PRODUCT_COPY_FILES += \ - device/google/muskie/manifest.xml:vendor/manifest.xml - -# Use Sdcardfs -PRODUCT_PROPERTY_OVERRIDES += \ - ro.sys.sdcardfs=1 - -# A/B support -PRODUCT_PACKAGES += \ - otapreopt_script \ - cppreopts.sh \ - update_engine \ - update_verifier - -PRODUCT_PACKAGES += SSRestartDetector - -PRODUCT_PACKAGES += \ - bootctrl.msm8998 - -PRODUCT_PROPERTY_OVERRIDES += \ - ro.cp_system_other_odex=1 - -AB_OTA_UPDATER := true - -AB_OTA_PARTITIONS += \ - boot \ - system - -AB_OTA_POSTINSTALL_CONFIG += \ - RUN_POSTINSTALL_system=true \ - POSTINSTALL_PATH_system=system/bin/otapreopt_script \ - FILESYSTEM_TYPE_system=ext4 \ - POSTINSTALL_OPTIONAL_system=true - - -PRODUCT_COPY_FILES += \ - frameworks/native/data/etc/android.hardware.camera.flash-autofocus.xml:system/etc/permissions/android.hardware.camera.flash-autofocus.xml \ - frameworks/native/data/etc/android.hardware.camera.front.xml:system/etc/permissions/android.hardware.camera.front.xml \ - frameworks/native/data/etc/android.hardware.camera.full.xml:system/etc/permissions/android.hardware.camera.full.xml\ - frameworks/native/data/etc/android.hardware.camera.raw.xml:system/etc/permissions/android.hardware.camera.raw.xml\ - frameworks/native/data/etc/android.hardware.bluetooth.xml:system/etc/permissions/android.hardware.bluetooth.xml \ - frameworks/native/data/etc/android.hardware.bluetooth_le.xml:system/etc/permissions/android.hardware.bluetooth_le.xml \ - frameworks/native/data/etc/android.hardware.sensor.accelerometer.xml:system/etc/permissions/android.hardware.sensor.accelerometer.xml \ - frameworks/native/data/etc/android.hardware.sensor.compass.xml:system/etc/permissions/android.hardware.sensor.compass.xml \ - frameworks/native/data/etc/android.hardware.sensor.gyroscope.xml:system/etc/permissions/android.hardware.sensor.gyroscope.xml \ - frameworks/native/data/etc/android.hardware.sensor.light.xml:system/etc/permissions/android.hardware.sensor.light.xml \ - frameworks/native/data/etc/android.hardware.sensor.proximity.xml:system/etc/permissions/android.hardware.sensor.proximity.xml \ - frameworks/native/data/etc/android.hardware.sensor.barometer.xml:system/etc/permissions/android.hardware.sensor.barometer.xml \ - frameworks/native/data/etc/android.hardware.sensor.stepcounter.xml:system/etc/permissions/android.hardware.sensor.stepcounter.xml \ - frameworks/native/data/etc/android.hardware.sensor.stepdetector.xml:system/etc/permissions/android.hardware.sensor.stepdetector.xml \ - frameworks/native/data/etc/android.hardware.sensor.hifi_sensors.xml:system/etc/permissions/android.hardware.sensor.hifi_sensors.xml \ - frameworks/native/data/etc/android.hardware.location.gps.xml:system/etc/permissions/android.hardware.location.gps.xml \ - frameworks/native/data/etc/android.hardware.telephony.gsm.xml:system/etc/permissions/android.hardware.telephony.gsm.xml \ - frameworks/native/data/etc/android.hardware.telephony.cdma.xml:system/etc/permissions/android.hardware.telephony.cdma.xml \ - frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \ - frameworks/native/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \ - frameworks/native/data/etc/android.hardware.wifi.direct.xml:system/etc/permissions/android.hardware.wifi.direct.xml \ - frameworks/native/data/etc/android.hardware.usb.accessory.xml:system/etc/permissions/android.hardware.usb.accessory.xml \ - frameworks/native/data/etc/android.hardware.usb.host.xml:system/etc/permissions/android.hardware.usb.host.xml \ - frameworks/native/data/etc/android.hardware.opengles.aep.xml:system/etc/permissions/android.hardware.opengles.aep.xml \ - -PRODUCT_COPY_FILES += \ - $(LOCAL_PATH)/init.power.sh:system/bin/init.power.sh \ - -# graphics -PRODUCT_PROPERTY_OVERRIDES += \ - ro.opengles.version=196610 - -# Enable low power video mode for 4K encode -PRODUCT_PROPERTY_OVERRIDES += \ - vidc.debug.perf.mode=2 - -# OEM Unlock reporting -PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \ - ro.oem_unlock_supported=1 - -PRODUCT_PROPERTY_OVERRIDES += \ - persist.cne.feature=1 \ - persist.data.iwlan.enable=true \ - persist.radio.RATE_ADAPT_ENABLE=1 \ - persist.radio.ROTATION_ENABLE=1 \ - persist.radio.VT_ENABLE=1 \ - persist.radio.VT_HYBRID_ENABLE=1 \ - persist.radio.apm_sim_not_pwdn=1 \ - persist.radio.data_ltd_sys_ind=1 \ - persist.radio.is_wps_enabled=true \ - persist.radio.videopause.mode=1 \ - persist.rcs.supported=1 \ - rild.libpath=/vendor/lib64/libril-qc-qmi-1.so - -# Set snapshot timer to 3 second -PRODUCT_PROPERTY_OVERRIDES += \ - persist.radio.snapshot_enabled=1 \ - persist.radio.snapshot_timer=3 - -PRODUCT_PROPERTY_OVERRIDES += \ - ro.vendor.extension_library=libqti-perfd-client.so - -# camera gyro and laser sensor -PRODUCT_PROPERTY_OVERRIDES += \ - persist.camera.gyro.android=4 \ - persist.camera.tof.direct=1 \ - persist.camera.max.previewfps=60 \ - persist.camera.sensor.hdr=2 - -# WLAN driver configuration files -PRODUCT_COPY_FILES += \ - $(LOCAL_PATH)/wpa_supplicant_overlay.conf:system/etc/wifi/wpa_supplicant_overlay.conf \ - $(LOCAL_PATH)/p2p_supplicant_overlay.conf:system/etc/wifi/p2p_supplicant_overlay.conf \ - $(LOCAL_PATH)/wifi_concurrency_cfg.txt:system/etc/wifi/wifi_concurrency_cfg.txt \ - $(LOCAL_PATH)/WCNSS_qcom_cfg.ini:system/etc/firmware/wlan/qca_cld/WCNSS_qcom_cfg.ini - -PRODUCT_PACKAGES += \ - hwcomposer.msm8998 \ - gralloc.msm8998 \ - android.hardware.graphics.allocator@2.0-impl \ - android.hardware.graphics.allocator@2.0-service \ - android.hardware.graphics.mapper@2.0-impl \ - android.hardware.graphics.composer@2.1-impl \ - libbt-vendor - -# Light HAL -PRODUCT_PACKAGES += \ - lights.$(PRODUCT_HARDWARE) \ - android.hardware.light@2.0-impl \ - android.hardware.light@2.0-service - -# gatekeeper HAL -PRODUCT_PACKAGES += \ - android.hardware.gatekeeper@1.0-impl \ - android.hardware.gatekeeper@1.0-service - -# Keymaster HAL -PRODUCT_PACKAGES += \ - android.hardware.keymaster@3.0-impl - -# Bluetooth HAL -PRODUCT_PACKAGES += \ - android.hardware.bluetooth@1.0-impl \ - android.hardware.bluetooth@1.0-service - -ifeq ($(ENABLE_TREBLE), true) -PRODUCT_PACKAGES += \ - android.hardware.keymaster@3.0-service -endif - -PRODUCT_PACKAGES += \ - libmm-omxcore \ - libOmxCore \ - libstagefrighthw \ - libOmxVdec \ - libOmxVdecHevc \ - libOmxVenc \ - libc2dcolorconvert - -PRODUCT_PACKAGES += \ - android.hardware.camera.provider@2.4-impl \ - camera.device@3.2-impl \ - camera.msm8998 \ - libqomx_core \ - libmmjpeg_interface \ - libmmcamera_interface - -PRODUCT_PACKAGES += \ - sensors.$(PRODUCT_HARDWARE) \ - android.hardware.sensors@1.0-impl - -PRODUCT_COPY_FILES += \ - $(LOCAL_PATH)/sensors/hals.conf:system/etc/sensors/hals.conf - -PRODUCT_PACKAGES += \ - fs_config_dirs \ - fs_config_files - -# Boot control HAL -PRODUCT_PACKAGES += \ - android.hardware.boot@1.0-impl \ - android.hardware.boot@1.0-service \ - -# Vibrator HAL -PRODUCT_PACKAGES += \ - android.hardware.vibrator@1.0-impl - -# Thermal packages -PRODUCT_PACKAGES += \ - android.hardware.thermal@1.0-impl \ - android.hardware.thermal@1.0-service - -#GNSS HAL -PRODUCT_PACKAGES += \ - android.hardware.gnss@1.0-impl - -PRODUCT_COPY_FILES += \ - $(LOCAL_PATH)/sec_config:system/etc/sec_config - -PRODUCT_PACKAGES += \ - gps.conf \ - gps.default \ - libgps.utils \ - libloc_eng \ - libloc_api_v02 \ - libloc_ds_api \ - libgnsspps - -HOSTAPD := hostapd -HOSTAPD += hostapd_cli -PRODUCT_PACKAGES += $(HOSTAPD) - -WPA := wpa_supplicant.conf -WPA += wpa_supplicant_wcn.conf -WPA += wpa_supplicant -PRODUCT_PACKAGES += $(WPA) - -PRODUCT_PACKAGES += \ - android.hardware.wifi@1.0-service \ - wificond \ - wifilogd - -LIB_NL := libnl_2 -PRODUCT_PACKAGES += $(LIB_NL) - -PRODUCT_PACKAGES += \ - audio.primary.msm8998 \ - audio.a2dp.default \ - audio.usb.default \ - audio.r_submix.default \ - libaudio-resampler - -PRODUCT_PACKAGES += \ - android.hardware.audio@2.0-impl \ - android.hardware.audio.effect@2.0-impl \ - android.hardware.broadcastradio@1.0-impl \ - android.hardware.soundtrigger@2.0-impl - -# Thermal packages -PRODUCT_PACKAGES += \ - thermal.default - -ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT))) -PRODUCT_PACKAGES += \ - tinyplay \ - tinycap \ - tinymix \ - tinypcminfo \ - cplay -endif - -PRODUCT_COPY_FILES += \ - $(LOCAL_PATH)/audio_policy_configuration.xml:system/etc/audio_policy_configuration.xml \ - frameworks/av/services/audiopolicy/config/a2dp_audio_policy_configuration.xml:system/etc/a2dp_audio_policy_configuration.xml \ - frameworks/av/services/audiopolicy/config/usb_audio_policy_configuration.xml:system/etc/usb_audio_policy_configuration.xml \ - frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:system/etc/r_submix_audio_policy_configuration.xml \ - frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:system/etc/audio_policy_volumes.xml \ - frameworks/av/services/audiopolicy/config/default_volume_tables.xml:system/etc/default_volume_tables.xml \ - -# audio hal tables -PRODUCT_COPY_FILES += \ - $(LOCAL_PATH)/mixer_paths.xml:system/etc/mixer_paths.xml \ - $(LOCAL_PATH)/mixer_paths_tasha.xml:system/etc/mixer_paths_tasha.xml \ - $(LOCAL_PATH)/mixer_paths_tavil.xml:system/etc/mixer_paths_tavil.xml \ - $(LOCAL_PATH)/audio_platform_info.xml:system/etc/audio_platform_info.xml \ - $(LOCAL_PATH)/audio_platform_info_tavil.xml:system/etc/audio_platform_info_tavil.xml \ - -PRODUCT_COPY_FILES += \ - $(LOCAL_PATH)/media_codecs.xml:system/etc/media_codecs.xml \ - frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:system/etc/media_codecs_google_audio.xml \ - frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:system/etc/media_codecs_google_telephony.xml \ - frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:system/etc/media_codecs_google_video.xml \ - $(LOCAL_PATH)/media_profiles.xml:system/etc/media_profiles.xml \ - -PRODUCT_PROPERTY_OVERRIDES += \ - audio.snd_card.open.retries=50 - -PRODUCT_COPY_FILES += \ - $(LOCAL_PATH)/lowi.conf:system/etc/lowi.conf - -# Fingerprint HIDL implementation -PRODUCT_PACKAGES += \ - fingerprint.fpc \ - android.hardware.biometrics.fingerprint@2.1-service - -PRODUCT_COPY_FILES += \ - frameworks/native/data/etc/android.hardware.fingerprint.xml:system/etc/permissions/android.hardware.fingerprint.xml - -# Kernel modules -PRODUCT_COPY_FILES += \ - device/google/muskie-kernel/synaptics_dsx_core_htc.ko:$(TARGET_COPY_OUT_VENDOR)/lib/modules/synaptics_dsx_core_htc.ko \ - device/google/muskie-kernel/synaptics_dsx_rmi_dev_htc.ko:$(TARGET_COPY_OUT_VENDOR)/lib/modules/synaptics_dsx_rmi_dev_htc.ko \ - device/google/muskie-kernel/synaptics_dsx_fw_update_htc.ko:$(TARGET_COPY_OUT_VENDOR)/lib/modules/synaptics_dsx_fw_update_htc.ko - -# Vendor seccomp policy files for media components: -PRODUCT_COPY_FILES += \ - device/google/muskie/seccomp_policy/mediacodec.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/mediacodec.policy - -# setup dalvik vm configs -$(call inherit-product, frameworks/native/build/phone-xhdpi-2048-dalvik-heap.mk) diff --git a/device-muskie.mk b/device-muskie.mk index 5cb7740..36c9b0d 100644 --- a/device-muskie.mk +++ b/device-muskie.mk @@ -20,7 +20,19 @@ PRODUCT_AAPT_PREBUILT_DPI := xxxhdpi xxhdpi xhdpi hdpi PRODUCT_HARDWARE := muskie -include device/google/muskie/device-common.mk +TARGET_PREBUILT_KERNEL := device/google/muskie-kernel/Image.lz4-dtb + +# fstab: should be shared through wahoo when that becomes possible: +PRODUCT_COPY_FILES += \ + device/google/wahoo/fstab.hardware:root/fstab.$(PRODUCT_HARDWARE) \ + +# Kernel modules +PRODUCT_COPY_FILES += \ + device/google/muskie-kernel/synaptics_dsx_core_htc.ko:$(TARGET_COPY_OUT_VENDOR)/lib/modules/synaptics_dsx_core_htc.ko \ + device/google/muskie-kernel/synaptics_dsx_rmi_dev_htc.ko:$(TARGET_COPY_OUT_VENDOR)/lib/modules/synaptics_dsx_rmi_dev_htc.ko \ + device/google/muskie-kernel/synaptics_dsx_fw_update_htc.ko:$(TARGET_COPY_OUT_VENDOR)/lib/modules/synaptics_dsx_fw_update_htc.ko + +include device/google/wahoo/device.mk PRODUCT_PROPERTY_OVERRIDES += \ ro.sf.lcd_density=560 \ diff --git a/device-walleye.mk b/device-walleye.mk index 6633c15..6e59153 100644 --- a/device-walleye.mk +++ b/device-walleye.mk @@ -20,7 +20,19 @@ PRODUCT_AAPT_PREBUILT_DPI := xxhdpi xhdpi hdpi PRODUCT_HARDWARE := walleye -include device/google/muskie/device-common.mk +TARGET_PREBUILT_KERNEL := device/google/muskie-kernel/Image.lz4-dtb + +# Kernel modules +PRODUCT_COPY_FILES += \ + device/google/muskie-kernel/synaptics_dsx_core_htc.ko:$(TARGET_COPY_OUT_VENDOR)/lib/modules/synaptics_dsx_core_htc.ko \ + device/google/muskie-kernel/synaptics_dsx_rmi_dev_htc.ko:$(TARGET_COPY_OUT_VENDOR)/lib/modules/synaptics_dsx_rmi_dev_htc.ko \ + device/google/muskie-kernel/synaptics_dsx_fw_update_htc.ko:$(TARGET_COPY_OUT_VENDOR)/lib/modules/synaptics_dsx_fw_update_htc.ko + +include device/google/wahoo/device.mk + +# Until all devices supports encryption, need an fstab without encryption +PRODUCT_COPY_FILES += \ + device/google/taimen/fstab.hardware:root/fstab.$(PRODUCT_HARDWARE) \ PRODUCT_PROPERTY_OVERRIDES += \ ro.sf.lcd_density=420 diff --git a/dumpstate/Android.mk b/dumpstate/Android.mk deleted file mode 100644 index 00bc4ea..0000000 --- a/dumpstate/Android.mk +++ /dev/null @@ -1,28 +0,0 @@ -# -# Copyright 2017 The Android Open Source Project -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -LOCAL_PATH:= $(call my-dir) -include $(CLEAR_VARS) - -LOCAL_STATIC_LIBRARIES := libdumpstateheaders - -LOCAL_SRC_FILES := dumpstate.cpp - -LOCAL_MODULE := libdumpstate.$(TARGET_DEVICE) - -LOCAL_MODULE_TAGS := optional - -include $(BUILD_STATIC_LIBRARY) diff --git a/dumpstate/dumpstate.cpp b/dumpstate/dumpstate.cpp deleted file mode 100644 index a058764..0000000 --- a/dumpstate/dumpstate.cpp +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright 2017 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#define LOG_TAG "dumpstate" - -#include -#include -#include -#include -#include -#include - -#include - -#define MODEM_LOG_PREFIX_PROPERTY "ro.radio.log_prefix" -#define MODEM_LOGGING_SWITCH "persist.radio.smlog_switch" - -static void getModemLogs(Dumpstate &ds) -{ - bool modemLogsEnabled = 0; - - /* Check if smlog_dump tool exist */ - if (!ds.IsUserBuild() && !access("/system/bin/smlog_dump", F_OK)) { - modemLogsEnabled = android::base::GetBoolProperty(MODEM_LOGGING_SWITCH, false); - - /* Execute SMLOG DUMP if SMLOG is enabled */ - if (modemLogsEnabled && !ds.GetPath("").empty()) { - std::string bugreportDir = dirname(ds.GetPath("").c_str()); - CommandOptions options = CommandOptions::WithTimeout(120).AsRoot().Build(); - ds.RunCommand("SMLOG DUMP", { "smlog_dump", "-d", "-o", bugreportDir.c_str() }, options); - - // Remove smlog folders older than 10 days. - std::string filePrefix = android::base::GetProperty(MODEM_LOG_PREFIX_PROPERTY, ""); - if (!filePrefix.empty()) { - - std::string removeCommand = "/system/bin/find " + - bugreportDir + "/" + filePrefix + "* -mtime +10 -delete"; - - ds.RunCommand("RM OLD SMLOG", - { "/system/bin/sh", "-c", removeCommand.c_str()}, - CommandOptions::AS_ROOT_5); - } - } - } -} - - -void dumpstate_board() -{ - Dumpstate& ds = Dumpstate::GetInstance(); - - getModemLogs(ds); - ds.DumpFile("CPU present", "/sys/devices/system/cpu/present"); - ds.DumpFile("CPU online", "/sys/devices/system/cpu/online"); - ds.DumpFile("RPM Stats", "/d/rpm_stats"); - ds.DumpFile("Power Management Stats", "/d/rpm_master_stats"); - ds.DumpFile("SMD Log", "/d/ipc_logging/smd/log"); - ds.RunCommand("ION HEAPS", {"/system/bin/sh", "-c", "for d in $(ls -d /d/ion/*); do for f in $(ls $d); do echo --- $d/$f; cat $d/$f; done; done"}, CommandOptions::AS_ROOT_5); - ds.DumpFile("dmabuf info", "/d/dma_buf/bufinfo"); - ds.RunCommand("Temperatures", {"/system/bin/sh", "-c", "for f in `ls /sys/class/thermal` ; do type=`cat /sys/class/thermal/$f/type` ; temp=`cat /sys/class/thermal/$f/temp` ; echo \"$type: $temp\" ; done"}, CommandOptions::AS_ROOT_5); - ds.DumpFile("cpu0-3 time-in-state", "/sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state"); - ds.RunCommand("cpu0-3 cpuidle", {"/system/bin/sh", "-c", "for d in $(ls -d /sys/devices/system/cpu/cpu0/cpuidle/state*); do echo \"$d: `cat $d/name` `cat $d/desc` `cat $d/time` `cat $d/usage`\"; done"}, CommandOptions::AS_ROOT_5); - ds.DumpFile("cpu4-7 time-in-state", "/sys/devices/system/cpu/cpu4/cpufreq/stats/time_in_state"); - ds.RunCommand("cpu4-7 cpuidle", {"/system/bin/sh", "-c", "for d in $(ls -d /sys/devices/system/cpu/cpu4/cpuidle/state*); do echo \"$d: `cat $d/name` `cat $d/desc` `cat $d/time` `cat $d/usage`\"; done"}, CommandOptions::AS_ROOT_5); - ds.DumpFile("MDP xlogs", "/d/mdp/xlog/dump"); - ds.RunCommand("RAMDUMP LIST", {"/system/bin/sh", "-c", "cat /data/data/com.android.ramdump/files/RAMDUMP_LIST"}, CommandOptions::AS_ROOT_5); - - /* Check if qsee_logger tool exists */ - if (!access("/vendor/bin/qsee_logger", F_OK)) { - ds.RunCommand("FP LOGS", {"qsee_logger", "-d"}); - } -}; diff --git a/fstab.hardware b/fstab.hardware deleted file mode 100644 index 854506c..0000000 --- a/fstab.hardware +++ /dev/null @@ -1,9 +0,0 @@ -# Android fstab file. - -# -/dev/block/bootdevice/by-name/system / ext4 ro,barrier=1 wait,slotselect -/dev/block/bootdevice/by-name/vendor /vendor ext4 ro,barrier=1 wait,slotselect -/dev/block/bootdevice/by-name/userdata /data ext4 noatime,nosuid,nodev,barrier=1,noauto_da_alloc wait,check,fileencryption=ice:aes-256-heh -/dev/block/bootdevice/by-name/misc /misc emmc defaults defaults -/dev/block/bootdevice/by-name/modem /firmware vfat ro,shortname=lower,uid=1000,gid=1000,dmask=227,fmask=337,context=u:object_r:firmware_file:s0 wait,slotselect -/devices/soc/a800000.ssusb/a800000.dwc3* auto vfat defaults voldmanaged=usb:auto diff --git a/init.hardware.diag.rc.user b/init.hardware.diag.rc.user deleted file mode 100644 index 1fc0b0c..0000000 --- a/init.hardware.diag.rc.user +++ /dev/null @@ -1,18 +0,0 @@ -# -# Copyright (C) 2016 The Android Open-Source Project -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -on property:ro.boot.mode=normal - rm /dev/diag diff --git a/init.hardware.diag.rc.userdebug b/init.hardware.diag.rc.userdebug deleted file mode 100644 index e2adedc..0000000 --- a/init.hardware.diag.rc.userdebug +++ /dev/null @@ -1,324 +0,0 @@ -# -# Copyright (C) 2016 The Android Open-Source Project -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -on post-fs-data - # Modem logging collection - mkdir /data/diag_logs 0777 system system - # WLAN logging collection - mkdir /data/cnss_diag 0777 system system - -on boot - chmod 666 /dev/diag - -on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag" - rm /config/usb_gadget/g1/configs/b.1/f1 - rm /config/usb_gadget/g1/configs/b.1/f2 - rm /config/usb_gadget/g1/configs/b.1/f3 - rm /config/usb_gadget/g1/configs/b.1/f4 - rm /config/usb_gadget/g1/configs/b.1/f5 - write /config/usb_gadget/g1/idVendor 0x05C6 - write /config/usb_gadget/g1/idProduct 0x900E - symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 - write /config/usb_gadget/g1/UDC ${sys.usb.controller} - setprop sys.usb.state ${sys.usb.config} - -on property:sys.usb.config=diag,adb && property:sys.usb.configfs=1 - start adbd - -on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,adb && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_adb" - rm /config/usb_gadget/g1/configs/b.1/f1 - rm /config/usb_gadget/g1/configs/b.1/f2 - rm /config/usb_gadget/g1/configs/b.1/f3 - rm /config/usb_gadget/g1/configs/b.1/f4 - rm /config/usb_gadget/g1/configs/b.1/f5 - write /config/usb_gadget/g1/idVendor 0x05C6 - write /config/usb_gadget/g1/idProduct 0x901D - symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 - symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f2 - write /config/usb_gadget/g1/UDC ${sys.usb.controller} - setprop sys.usb.state ${sys.usb.config} - -on property:sys.usb.config=diag,serial_cdev,rmnet_gsi,adb && property:sys.usb.configfs=1 - start adbd - -on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,serial_cdev,rmnet_gsi,adb && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "Default composition" - rm /config/usb_gadget/g1/configs/b.1/f1 - rm /config/usb_gadget/g1/configs/b.1/f2 - rm /config/usb_gadget/g1/configs/b.1/f3 - rm /config/usb_gadget/g1/configs/b.1/f4 - rm /config/usb_gadget/g1/configs/b.1/f5 - write /config/usb_gadget/g1/idVendor 0x05C6 - write /config/usb_gadget/g1/idProduct 0x9091 - symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 - symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2 - symlink /config/usb_gadget/g1/functions/gsi.rmnet /config/usb_gadget/g1/configs/b.1/f3 - symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f4 - write /config/usb_gadget/g1/UDC ${sys.usb.controller} - setprop sys.usb.state ${sys.usb.config} - -on property:sys.usb.ffs.ready=1 && sys.usb.config=diag,serial_cdev,rmnet_gsi && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "Default comp without ADB" - rm /config/usb_gadget/g1/configs/b.1/f1 - rm /config/usb_gadget/g1/configs/b.1/f2 - rm /config/usb_gadget/g1/configs/b.1/f3 - rm /config/usb_gadget/g1/configs/b.1/f4 - rm /config/usb_gadget/g1/configs/b.1/f5 - write /config/usb_gadget/g1/idVendor 0x05C6 - write /config/usb_gadget/g1/idProduct 0x9092 - symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 - symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2 - symlink /config/usb_gadget/g1/functions/gsi.rmnet /config/usb_gadget/g1/configs/b.1/f3 - write /config/usb_gadget/g1/UDC ${sys.usb.controller} - setprop sys.usb.state ${sys.usb.config} - -on property:sys.usb.config=rndis,diag && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_diag" - rm /config/usb_gadget/g1/configs/b.1/f1 - rm /config/usb_gadget/g1/configs/b.1/f2 - rm /config/usb_gadget/g1/configs/b.1/f3 - rm /config/usb_gadget/g1/configs/b.1/f4 - rm /config/usb_gadget/g1/configs/b.1/f5 - write /config/usb_gadget/g1/idVendor 0x05C6 - write /config/usb_gadget/g1/idProduct 0x902C - symlink /config/usb_gadget/g1/functions/gsi.rndis /config/usb_gadget/g1/configs/b.1/f1 - symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2 - write /config/usb_gadget/g1/UDC ${sys.usb.controller} - setprop sys.usb.state rndis - -on property:sys.usb.config=rndis,diag,adb && property:sys.usb.configfs=1 - start adbd - -on property:sys.usb.ffs.ready=1 && property:sys.usb.config=rndis,diag,adb && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_diag_adb" - rm /config/usb_gadget/g1/configs/b.1/f1 - rm /config/usb_gadget/g1/configs/b.1/f2 - rm /config/usb_gadget/g1/configs/b.1/f3 - rm /config/usb_gadget/g1/configs/b.1/f4 - rm /config/usb_gadget/g1/configs/b.1/f5 - write /config/usb_gadget/g1/idVendor 0x05C6 - write /config/usb_gadget/g1/idProduct 0x902D - symlink /config/usb_gadget/g1/functions/gsi.rndis /config/usb_gadget/g1/configs/b.1/f1 - symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2 - symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f3 - write /config/usb_gadget/g1/UDC ${sys.usb.controller} - setprop sys.usb.state rndis,adb - -on property:sys.usb.config=rndis,serial_cdev,diag && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_dun_diag" - rm /config/usb_gadget/g1/configs/b.1/f1 - rm /config/usb_gadget/g1/configs/b.1/f2 - rm /config/usb_gadget/g1/configs/b.1/f3 - rm /config/usb_gadget/g1/configs/b.1/f4 - rm /config/usb_gadget/g1/configs/b.1/f5 - write /config/usb_gadget/g1/idVendor 0x05C6 - write /config/usb_gadget/g1/idProduct 0x90B5 - symlink /config/usb_gadget/g1/functions/gsi.rndis /config/usb_gadget/g1/configs/b.1/f1 - symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2 - symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f3 - write /config/usb_gadget/g1/UDC ${sys.usb.controller} - setprop sys.usb.state rndis - -on property:sys.usb.config=rndis,serial_cdev,diag,adb && property:sys.usb.configfs=1 - start adbd - -on property:sys.usb.ffs.ready=1 && property:sys.usb.config=rndis,serial_cdev,diag,adb && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_dun_diag" - rm /config/usb_gadget/g1/configs/b.1/f1 - rm /config/usb_gadget/g1/configs/b.1/f2 - rm /config/usb_gadget/g1/configs/b.1/f3 - rm /config/usb_gadget/g1/configs/b.1/f4 - rm /config/usb_gadget/g1/configs/b.1/f5 - write /config/usb_gadget/g1/idVendor 0x05C6 - write /config/usb_gadget/g1/idProduct 0x90B6 - symlink /config/usb_gadget/g1/functions/gsi.rndis /config/usb_gadget/g1/configs/b.1/f1 - symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2 - symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f3 - symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f4 - write /config/usb_gadget/g1/UDC ${sys.usb.controller} - setprop sys.usb.state rndis,adb - -on property:sys.usb.config=mtp,diag && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "mtp_diag" - rm /config/usb_gadget/g1/configs/b.1/f1 - rm /config/usb_gadget/g1/configs/b.1/f2 - rm /config/usb_gadget/g1/configs/b.1/f3 - rm /config/usb_gadget/g1/configs/b.1/f4 - rm /config/usb_gadget/g1/configs/b.1/f5 - write /config/usb_gadget/g1/idVendor 0x05C6 - write /config/usb_gadget/g1/idProduct 0x901B - symlink /config/usb_gadget/g1/functions/mtp.gs0 /config/usb_gadget/g1/configs/b.1/f1 - symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2 - write /config/usb_gadget/g1/UDC ${sys.usb.controller} - setprop sys.usb.state ${sys.usb.config} - -on property:sys.usb.config=mtp,diag,adb && property:sys.usb.configfs=1 - start adbd - -on property:sys.usb.ffs.ready=1 && property:sys.usb.config=mtp,diag,adb && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "mtp_diag_adb" - rm /config/usb_gadget/g1/configs/b.1/f1 - rm /config/usb_gadget/g1/configs/b.1/f2 - rm /config/usb_gadget/g1/configs/b.1/f3 - rm /config/usb_gadget/g1/configs/b.1/f4 - rm /config/usb_gadget/g1/configs/b.1/f5 - write /config/usb_gadget/g1/idVendor 0x05C6 - write /config/usb_gadget/g1/idProduct 0x903A - symlink /config/usb_gadget/g1/functions/mtp.gs0 /config/usb_gadget/g1/configs/b.1/f1 - symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2 - symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f3 - write /config/usb_gadget/g1/UDC ${sys.usb.controller} - setprop sys.usb.state ${sys.usb.config} - -on property:sys.usb.config=diag,qdss && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_qdss" - rm /config/usb_gadget/g1/configs/b.1/f1 - rm /config/usb_gadget/g1/configs/b.1/f2 - rm /config/usb_gadget/g1/configs/b.1/f3 - rm /config/usb_gadget/g1/configs/b.1/f4 - rm /config/usb_gadget/g1/configs/b.1/f5 - write /config/usb_gadget/g1/idVendor 0x05C6 - write /config/usb_gadget/g1/idProduct 0x904A - write /config/usb_gadget/g1/functions/qdss.qdss/enable_debug_inface 1 - symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 - symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f2 - write /config/usb_gadget/g1/UDC ${sys.usb.controller} - setprop sys.usb.state ${sys.usb.config} - -on property:sys.usb.config=diag,qdss,adb && property:sys.usb.configfs=1 - start adbd - -on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,qdss,adb && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_qdss_adb" - rm /config/usb_gadget/g1/configs/b.1/f1 - rm /config/usb_gadget/g1/configs/b.1/f2 - rm /config/usb_gadget/g1/configs/b.1/f3 - rm /config/usb_gadget/g1/configs/b.1/f4 - rm /config/usb_gadget/g1/configs/b.1/f5 - write /config/usb_gadget/g1/idVendor 0x05C6 - write /config/usb_gadget/g1/idProduct 0x9060 - write /config/usb_gadget/g1/functions/qdss.qdss/enable_debug_inface 1 - symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 - symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f2 - symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f3 - write /config/usb_gadget/g1/UDC ${sys.usb.controller} - setprop sys.usb.state ${sys.usb.config} - -on property:sys.usb.config=diag,qdss,rmnet_gsi && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_qdss_rmnet" - rm /config/usb_gadget/g1/configs/b.1/f1 - rm /config/usb_gadget/g1/configs/b.1/f2 - rm /config/usb_gadget/g1/configs/b.1/f3 - rm /config/usb_gadget/g1/configs/b.1/f4 - rm /config/usb_gadget/g1/configs/b.1/f5 - write /config/usb_gadget/g1/idVendor 0x05C6 - write /config/usb_gadget/g1/idProduct 0x9083 - write /config/usb_gadget/g1/functions/qdss.qdss/enable_debug_inface 1 - symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 - symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f2 - symlink /config/usb_gadget/g1/functions/gsi.rmnet /config/usb_gadget/g1/configs/b.1/f3 - write /config/usb_gadget/g1/UDC ${sys.usb.controller} - setprop sys.usb.state ${sys.usb.config} - -on property:sys.usb.config=diag,qdss,rmnet_gsi,adb && property:sys.usb.configfs=1 - start adbd - -on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,qdss,rmnet_gsi,adb && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_qdss_rmnet_adb" - rm /config/usb_gadget/g1/configs/b.1/f1 - rm /config/usb_gadget/g1/configs/b.1/f2 - rm /config/usb_gadget/g1/configs/b.1/f3 - rm /config/usb_gadget/g1/configs/b.1/f4 - rm /config/usb_gadget/g1/configs/b.1/f5 - write /config/usb_gadget/g1/idVendor 0x05C6 - write /config/usb_gadget/g1/idProduct 0x9084 - write /config/usb_gadget/g1/functions/qdss.qdss/enable_debug_inface 1 - symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 - symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f2 - symlink /config/usb_gadget/g1/functions/gsi.rmnet /config/usb_gadget/g1/configs/b.1/f3 - symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f4 - write /config/usb_gadget/g1/UDC ${sys.usb.controller} - setprop sys.usb.state ${sys.usb.config} - -on property:sys.usb.config=rndis,diag,qdss && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_diag_qdss" - rm /config/usb_gadget/g1/configs/b.1/f1 - rm /config/usb_gadget/g1/configs/b.1/f2 - rm /config/usb_gadget/g1/configs/b.1/f3 - rm /config/usb_gadget/g1/configs/b.1/f4 - rm /config/usb_gadget/g1/configs/b.1/f5 - write /config/usb_gadget/g1/idVendor 0x05C6 - write /config/usb_gadget/g1/idProduct 0x9081 - write /config/usb_gadget/g1/functions/qdss.qdss/enable_debug_inface 1 - symlink /config/usb_gadget/g1/functions/gsi.rndis /config/usb_gadget/g1/configs/b.1/f1 - symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2 - symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f3 - write /config/usb_gadget/g1/UDC ${sys.usb.controller} - setprop sys.usb.state ${sys.usb.config} - -on property:sys.usb.config=rndis,diag,qdss,adb && property:sys.usb.configfs=1 - start adbd - -on property:sys.usb.ffs.ready=1 && property:sys.usb.config=rndis,diag,qdss,adb && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "rndis_diag_qdss_adb" - rm /config/usb_gadget/g1/configs/b.1/f1 - rm /config/usb_gadget/g1/configs/b.1/f2 - rm /config/usb_gadget/g1/configs/b.1/f3 - rm /config/usb_gadget/g1/configs/b.1/f4 - rm /config/usb_gadget/g1/configs/b.1/f5 - write /config/usb_gadget/g1/idVendor 0x05C6 - write /config/usb_gadget/g1/idProduct 0x9082 - write /config/usb_gadget/g1/functions/qdss.qdss/enable_debug_inface 1 - symlink /config/usb_gadget/g1/functions/gsi.rndis /config/usb_gadget/g1/configs/b.1/f1 - symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f2 - symlink /config/usb_gadget/g1/functions/qdss.qdss /config/usb_gadget/g1/configs/b.1/f3 - symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f4 - write /config/usb_gadget/g1/UDC ${sys.usb.controller} - setprop sys.usb.state ${sys.usb.config} - -on property:sys.usb.config=diag,serial_cdev && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_dun" - rm /config/usb_gadget/g1/configs/b.1/f1 - rm /config/usb_gadget/g1/configs/b.1/f2 - rm /config/usb_gadget/g1/configs/b.1/f3 - rm /config/usb_gadget/g1/configs/b.1/f4 - rm /config/usb_gadget/g1/configs/b.1/f5 - write /config/usb_gadget/g1/idVendor 0x05C6 - write /config/usb_gadget/g1/idProduct 0x9004 - symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 - symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f2 - write /config/usb_gadget/g1/UDC ${sys.usb.controller} - setprop sys.usb.state ${sys.usb.config} - -on property:sys.usb.config=diag,adb,serial_cdev && property:sys.usb.configfs=1 - start adbd - -on property:sys.usb.ffs.ready=1 && property:sys.usb.config=diag,adb,serial_cdev && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/configs/b.1/strings/0x409/configuration "diag_adb_dun" - rm /config/usb_gadget/g1/configs/b.1/f1 - rm /config/usb_gadget/g1/configs/b.1/f2 - rm /config/usb_gadget/g1/configs/b.1/f3 - rm /config/usb_gadget/g1/configs/b.1/f4 - rm /config/usb_gadget/g1/configs/b.1/f5 - write /config/usb_gadget/g1/idVendor 0x05C6 - write /config/usb_gadget/g1/idProduct 0x901f - symlink /config/usb_gadget/g1/functions/diag.diag /config/usb_gadget/g1/configs/b.1/f1 - symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f2 - symlink /config/usb_gadget/g1/functions/cser.dun.0 /config/usb_gadget/g1/configs/b.1/f3 - write /config/usb_gadget/g1/UDC ${sys.usb.controller} - setprop sys.usb.state ${sys.usb.config} diff --git a/init.hardware.rc b/init.hardware.rc deleted file mode 100644 index 770f9ed..0000000 --- a/init.hardware.rc +++ /dev/null @@ -1,405 +0,0 @@ -# -# Copyright (C) 2016 The Android Open-Source Project -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -import init.${ro.hardware}.usb.rc -import init.${ro.hardware}.diag.rc - -on early-init - mount debugfs debugfs /sys/kernel/debug - chmod 0755 /sys/kernel/debug - -on init - # Support legacy paths - symlink /sdcard /mnt/sdcard - symlink /sdcard /storage/sdcard0 - -on fs - wait /dev/block/platform/soc/${ro.boot.bootdevice} - symlink /dev/block/platform/soc/${ro.boot.bootdevice} /dev/block/bootdevice - - mount_all fstab.${ro.hardware} - swapon_all fstab.${ro.hardware} - - # Keeping following partitions outside fstab file. As user may not have - # these partition flashed on the device. Failure to mount any partition in fstab file - # results in failure to launch late-start class. - - wait /dev/block/bootdevice/by-name/cache - mount ext4 /dev/block/bootdevice/by-name/cache /cache nosuid nodev noatime barrier=1 - - wait /dev/block/bootdevice/by-name/persist - mount ext4 /dev/block/bootdevice/by-name/persist /persist nosuid nodev noatime barrier=1 - restorecon_recursive /persist - mkdir /persist/data 0700 system system - -on post-fs - # set RLIMIT_MEMLOCK to 64MB - setrlimit 8 67108864 67108864 - - # Since bootloader does not have a UI turn screen ON - write /sys/class/leds/lcd-backlight/brightness 255 - - # Enable audio and video device for bootanim - write /sys/kernel/boot_adsp/boot 1 - write /sys/kernel/boot_slpi/boot 1 - - start qseecomd - - chmod 0664 /sys/devices/virtual/graphics/fb0/idle_time - chown system graphics /sys/devices/virtual/graphics/fb0/idle_time - -on property:sys.listeners.registered=true - # load IPA FWs - write /dev/ipa 1 - -on post-fs-data - mkdir /data/tombstones 0771 system system - mkdir /tombstones/modem 0771 system system - mkdir /tombstones/lpass 0771 system system - mkdir /tombstones/wcnss 0771 system system - mkdir /tombstones/dsps 0771 system system - mkdir /data/misc/qvop 0660 system system - mkdir /data/misc/hbtp 0750 system system - mkdir /data/misc/seemp 0700 system system - - # Create directory for TZ Apps - mkdir /data/misc/qsee 0770 system system - - #Create folder for mm-qcamera-daemon - mkdir /data/misc/camera 0770 camera camera - - mkdir /data/media 0770 media_rw media_rw - chown media_rw media_rw /data/media - - mkdir /data/misc/ipa 0700 net_admin net_admin - - # Create the directories used by the Wireless subsystem - mkdir /data/misc/wifi 0770 wifi wifi - mkdir /data/misc/wifi/sockets 0770 wifi wifi - mkdir /data/misc/wifi/wpa_supplicant 0770 wifi wifi - mkdir /data/misc/dhcp 0770 dhcp dhcp - chown dhcp dhcp /data/misc/dhcp - - # Mounting of persist is moved to 'on emmc-fs' and 'on fs' sections - # We chown/chmod /persist again so because mount is run as root + defaults - chown root system /persist - chmod 0771 /persist - chown system system /persist/WCNSS_qcom_wlan_nv.bin - - # Create directory for hostapd - mkdir /data/hostapd 0770 system wifi - - # Trigger WLAN driver load - write /sys/kernel/boot_wlan/boot_wlan 1 - - #create port-bridge log dir - mkdir /data/misc/port_bridge 0770 radio radio - chmod 0770 /data/misc/port_bridge - - #create netmgr log dir - mkdir /data/misc/netmgr 0770 radio radio - chmod 0770 /data/misc/netmgr - - # Create the directories used by CnE subsystem - mkdir /data/connectivity 0771 system system - chown system system /data/connectivity - - # Create the directories used by DPM subsystem - mkdir /data/dpm 0771 system system - chown system system /data/dpm - - mkdir /data/dpm/nsrm 0771 system system - chown system system /data/dpm/nsrm - - # Create directory used by audio subsystem - mkdir /data/misc/audio 0770 audio audio - - # Create directory for audio delta files - mkdir /data/misc/audio/acdbdata 0770 media audio - mkdir /data/misc/audio/acdbdata/delta 0770 media audio - - # Create directory used by the DASH client - mkdir /data/misc/dash 0770 media audio - - # Create directory used by display clients - mkdir /data/misc/display 0770 system graphics - - # Create perfd related dirs - mkdir /data/system/perfd 0770 root system - chmod 2770 /data/system/perfd - - chmod 775 /persist/sensors - chmod 664 /persist/sensors/sensors_settings - chown system root /persist/sensors/sensors_settings - - mkdir /data/misc/sensors - chmod 775 /data/misc/sensors - - # Mark the copy complete flag to not completed - write /data/misc/radio/copy_complete 0 - chown radio radio /data/misc/radio/copy_complete - chmod 0660 /data/misc/radio/copy_complete - - # File flags for prebuilt ril db file - write /data/misc/radio/prebuilt_db_support 1 - chown radio radio /data/misc/radio/prebuilt_db_support - chmod 0400 /data/misc/radio/prebuilt_db_support - write /data/misc/radio/db_check_done 0 - chown radio radio /data/misc/radio/db_check_done - chmod 0660 /data/misc/radio/db_check_done - - # Create directories for Location services - mkdir /data/misc/location 0770 gps gps - mkdir /data/misc/location/mq 0770 gps gps - mkdir /data/misc/location/xtwifi 0770 gps gps - mkdir /data/misc/location/gpsone_d 0770 system gps - mkdir /data/misc/location/quipc 0770 gps system - mkdir /data/misc/location/gsiff 0770 gps gps - - - # Set indication (checked by vold) that we have finished this action - setprop vold.post_fs_data_done 1 - -on early-boot - exec - root root system -- /system/bin/init.power.sh - - # update cpusets now that processors are up - # initialize for Silver Only first and then Silver + Gold - # Silver Only configuration cannot work with 0-7 - write /dev/cpuset/top-app/cpus 0-3 - write /dev/cpuset/foreground/cpus 0-3 - write /dev/cpuset/foreground/boost/cpus 0-3 - write /dev/cpuset/background/cpus 0-3 - write /dev/cpuset/system-background/cpus 0-3 - write /dev/cpuset/top-app/cpus 0-7 - write /dev/cpuset/foreground/cpus 0-7 - write /dev/cpuset/foreground/boost/cpus 0-7 - write /dev/cpuset/background/cpus 0-7 - write /dev/cpuset/system-background/cpus 0-7 - -on boot - # Install touch modules - insmod /vendor/lib/modules/synaptics_dsx_core_htc.ko - insmod /vendor/lib/modules/synaptics_dsx_fw_update_htc.ko - insmod /vendor/lib/modules/synaptics_dsx_rmi_dev_htc.ko - - mkdir /dev/socket/qmux_radio 0770 radio radio - chmod 2770 /dev/socket/qmux_radio - mkdir /dev/socket/qmux_audio 0770 media audio - chmod 2770 /dev/socket/qmux_audio - mkdir /dev/socket/qmux_bluetooth 0770 bluetooth bluetooth - chmod 2770 /dev/socket/qmux_bluetooth - mkdir /dev/socket/qmux_gps 0770 gps gps - chmod 2770 /dev/socket/qmux_gps - - # Create NETMGR daemon socket area - mkdir /dev/socket/netmgr 0750 radio radio - - setprop wifi.interface wlan0 - - # Define TCP buffer sizes for various networks - # ReadMin, ReadInitial, ReadMax, WriteMin, WriteInitial, WriteMax, - setprop net.tcp.buffersize.wifi 524288,2097152,4194304,262144,524288,1048576 - - # Assign TCP buffer thresholds to be ceiling value of technology maximums - # Increased technology maximums should be reflected here. - write /proc/sys/net/core/rmem_max 8388608 - - # Bluetooth - chown bluetooth net_bt /sys/class/rfkill/rfkill0/type - chown bluetooth net_bt /sys/class/rfkill/rfkill0/state - chmod 0660 /sys/class/rfkill/rfkill0/state - chown bluetooth net_bt /sys/class/rfkill/rfkill0/device/extldo - chmod 0660 /sys/class/rfkill/rfkill0/device/extldo - - # Wifi firmware reload path - chown wifi wifi /sys/module/wlan/parameters/fwpath - - # Required for time_daemon - mkdir /persist/time 0770 system system - mkdir /data/time/ 0700 system system - - # Permission for laser sensor driver - chown camera camera /sys/class/htc_laser/laser/enable_ps_sensor - -service init-radio-sh /system/bin/init.radio.sh - class late_start - user radio - group root radio - oneshot - -service perfd /vendor/bin/perfd - class main - user root - group root readproc - socket perfd seqpacket 0666 root system - -service thermal-engine /vendor/bin/thermal-engine - class main - user root - group root system - socket thermal-send-client stream 0666 system system - socket thermal-recv-client stream 0660 system system - socket thermal-recv-passive-client stream 0666 system system - -on property:persist.sys.ssr.restart_level=* - start ssr_setup - -service ssr_setup /vendor/bin/ssr_setup - oneshot - disabled - -service ssr_diag /vendor/bin/ssr_diag - class late_start - user system - group system - disabled - -service per_mgr /vendor/bin/pm-service - class core - user system - group system - ioprio rt 4 - -service per_proxy /vendor/bin/pm-proxy - class core - user system - group system - disabled - -on property:init.svc.per_mgr=running - start per_proxy - -on property:sys.shutdown.requested=* - stop per_proxy - -service qseecomd /vendor/bin/qseecomd - class core - user root - group root - -service time_daemon /vendor/bin/time_daemon - class late_start - user root - group root - -service ss_ramdump /vendor/bin/subsystem_ramdump - class main - user root - group root system - disabled - -on property:persist.sys.ssr.enable_ramdumps=1 - write /sys/module/subsystem_restart/parameters/enable_ramdumps 1 - mkdir /data/ramdump 761 root system - start ss_ramdump - -on property:persist.sys.ssr.enable_ramdumps=0 - write /sys/module/subsystem_restart/parameters/enable_ramdumps 0 - -service sensors /vendor/bin/sensors.qcom - class core - user root - group root - -service adsprpcd /vendor/bin/adsprpcd - class main - user media - group media - -service irsc_util /vendor/bin/irsc_util "/etc/sec_config" - class core - user root - oneshot - -service rmt_storage /vendor/bin/rmt_storage - class core - user root - -service tftp_server /vendor/bin/tftp_server - class core - user root - -service wpa_supplicant /vendor/bin/hw/wpa_supplicant \ - -ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf \ - -I/system/etc/wifi/p2p_supplicant_overlay.conf -N \ - -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ - -I/system/etc/wifi/wpa_supplicant_overlay.conf \ - -O/data/misc/wifi/sockets -puse_p2p_group_interface=1 -dd \ - -e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0 - # we will start as root and wpa_supplicant will switch to user wifi - # after setting up the capabilities required for WEXT - # user wifi - # group wifi inet keystore - class main - socket wpa_wlan0 dgram 660 wifi wifi - disabled - oneshot - -service cnss_diag /vendor/bin/cnss_diag -q -f - class main - user root - group root - oneshot - -service cnss-daemon /vendor/bin/cnss-daemon -n -l - class late_start - user system - group system inet net_admin wifi - -service netmgrd /vendor/bin/netmgrd - class main - user root - group root wifi wakelock radio inet - -service port-bridge /vendor/bin/port-bridge - class main - user radio - group radio system inet - oneshot - -service qti /vendor/bin/qti - class main - user radio - group radio net_raw diag usb net_admin - -on property:wc_transport.start_hci=true - start hci_filter - -on property:wc_transport.start_hci=false - stop hci_filter - -service hci_filter /vendor/bin/wcnss_filter - class late_start - user bluetooth - group bluetooth diag - disabled - -service loc_launcher /vendor/bin/loc_launcher - class late_start - group gps inet diag wifi - -service pd_mapper /vendor/bin/pd-mapper - class core - -# bugreport is triggered by holding down volume down, volume up and power -service bugreport /system/bin/dumpstate -d -p -B -z \ - -o /data/user_de/0/com.android.shell/files/bugreports/bugreport - class main - disabled - oneshot - keycodes 114 115 116 - diff --git a/init.hardware.usb.rc b/init.hardware.usb.rc deleted file mode 100644 index 55bf258..0000000 --- a/init.hardware.usb.rc +++ /dev/null @@ -1,111 +0,0 @@ -# -# Copyright (C) 2016 The Android Open-Source Project -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -on boot - mkdir /dev/usb-ffs 0770 shell shell - mkdir /dev/usb-ffs/adb 0770 shell shell - mount configfs none /config - mkdir /config/usb_gadget/g1 0770 shell shell - mkdir /config/usb_gadget/g1/strings/0x409 0770 shell shell - write /config/usb_gadget/g1/bcdUSB 0x0200 - write /config/usb_gadget/g1/idVendor 0x18d1 - write /config/usb_gadget/g1/bcdDevice 0x4ee1 - write /config/usb_gadget/g1/os_desc/use 1 - write /config/usb_gadget/g1/strings/0x409/serialnumber ${ro.serialno} - write /config/usb_gadget/g1/strings/0x409/manufacturer ${ro.product.manufacturer} - write /config/usb_gadget/g1/strings/0x409/product ${ro.product.model} - mkdir /config/usb_gadget/g1/functions/mass_storage.0 - mkdir /config/usb_gadget/g1/functions/mtp.gs0 - mkdir /config/usb_gadget/g1/functions/ptp.gs1 - mkdir /config/usb_gadget/g1/functions/accessory.gs2 - mkdir /config/usb_gadget/g1/functions/audio_source.gs3 - mkdir /config/usb_gadget/g1/functions/midi.gs5 - mkdir /config/usb_gadget/g1/functions/ffs.adb - mkdir /config/usb_gadget/g1/functions/diag.diag - mkdir /config/usb_gadget/g1/functions/cser.dun.0 - mkdir /config/usb_gadget/g1/functions/cser.nmea.1 - mkdir /config/usb_gadget/g1/functions/gsi.rmnet - mkdir /config/usb_gadget/g1/functions/gsi.rndis - mkdir /config/usb_gadget/g1/functions/qdss.qdss - mkdir /config/usb_gadget/g1/configs/b.1 0770 shell shell - mkdir /config/usb_gadget/g1/configs/b.1/strings/0x409 0770 shell shell - write /config/usb_gadget/g1/os_desc/b_vendor_code 0x1 - write /config/usb_gadget/g1/os_desc/qw_sign "MSFT100" - symlink /config/usb_gadget/g1/configs/b.1 /config/usb_gadget/g1/os_desc/b.1 - mount functionfs adb /dev/usb-ffs/adb uid=2000,gid=2000 - write /sys/class/android_usb/android0/f_ffs/aliases adb - setprop sys.usb.configfs 1 - setprop sys.usb.controller "a800000.dwc3" - -on property:sys.usb.config=none && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/os_desc/use 0 - setprop sys.usb.ffs.ready 0 - -on property:init.svc.adbd=stopped - setprop sys.usb.ffs.ready 0 - -on property:sys.usb.config=mtp && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/functions/mtp.gs0/os_desc/interface.MTP/compatible_id "MTP" - write /config/usb_gadget/g1/os_desc/use 1 - write /config/usb_gadget/g1/idProduct 0x4ee1 - -on property:sys.usb.config=mtp,adb && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/functions/mtp.gs0/os_desc/interface.MTP/compatible_id "MTP" - write /config/usb_gadget/g1/os_desc/use 1 - write /config/usb_gadget/g1/idProduct 0x4ee2 - -on property:sys.usb.config=rndis && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/idProduct 0x4ee3 - -on property:sys.usb.config=rndis,adb && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/idProduct 0x4ee4 - -on property:sys.usb.config=ptp && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/functions/ptp.gs1/os_desc/interface.MTP/compatible_id "PTP" - write /config/usb_gadget/g1/os_desc/use 1 - write /config/usb_gadget/g1/idProduct 0x4ee5 - -on property:sys.usb.config=ptp,adb && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/functions/ptp.gs1/os_desc/interface.MTP/compatible_id "PTP" - write /config/usb_gadget/g1/os_desc/use 1 - write /config/usb_gadget/g1/idProduct 0x4ee6 - -on property:sys.usb.config=adb && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/idProduct 0x4ee7 - -on property:sys.usb.config=midi && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/idProduct 0x4ee8 - -on property:sys.usb.config=midi,adb && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/idProduct 0x4ee9 - -on property:sys.usb.config=accessory && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/idProduct 0x2d00 - -on property:sys.usb.config=accessory,adb && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/idProduct 0x2d01 - -on property:sys.usb.config=audio_source && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/idProduct 0x2d02 - -on property:sys.usb.config=audio_source,adb && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/idProduct 0x2d03 - -on property:sys.usb.config=accessory,audio_source && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/idProduct 0x2d04 - -on property:sys.usb.config=accessory,audio_source,adb && property:sys.usb.configfs=1 - write /config/usb_gadget/g1/idProduct 0x2d05 diff --git a/init.power.sh b/init.power.sh deleted file mode 100644 index e2c7704..0000000 --- a/init.power.sh +++ /dev/null @@ -1,76 +0,0 @@ -#!/system/bin/sh - -################################################################################ -# helper functions to allow Android init like script - -function write() { - echo -n $2 > $1 -} - -function copy() { - cat $1 > $2 -} - -################################################################################ - -soc_revision=`cat /sys/devices/soc0/revision` -if [ "$soc_revision" == "1.0" ]; then - # Disable retention low power modes - write /sys/module/lpm_levels/system/pwr/cpu0/ret/idle_enabled N - write /sys/module/lpm_levels/system/pwr/cpu1/ret/idle_enabled N - write /sys/module/lpm_levels/system/pwr/cpu2/ret/idle_enabled N - write /sys/module/lpm_levels/system/pwr/cpu3/ret/idle_enabled N - write /sys/module/lpm_levels/system/perf/cpu4/ret/idle_enabled N - write /sys/module/lpm_levels/system/perf/cpu5/ret/idle_enabled N - write /sys/module/lpm_levels/system/perf/cpu6/ret/idle_enabled N - write /sys/module/lpm_levels/system/perf/cpu7/ret/idle_enabled N - # Enable all LPMs by default - write /sys/module/lpm_levels/parameters/sleep_disabled N -fi - -# disable thermal hotplug to switch governor -write /sys/module/msm_thermal/core_control/enabled 0 - -# bring back main cores CPU 0,4 -write /sys/devices/system/cpu/cpu0/online 1 -write /sys/devices/system/cpu/cpu4/online 1 - -# Setting b.L scheduler parameters -write /proc/sys/kernel/sched_migration_fixup 1 -write /proc/sys/kernel/sched_upmigrate 99 -write /proc/sys/kernel/sched_downmigrate 85 -write /proc/sys/kernel/sched_freq_inc_notify 400000 -write /proc/sys/kernel/sched_freq_dec_notify 400000 -write /proc/sys/kernel/sched_spill_nr_run 5 -write /proc/sys/kernel/sched_restrict_cluster_spill 1 - -# configure governor settings for little cluster -write /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor "sched" - -# configure governor settings for big cluster -write /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor "sched" - -# re-enable thermal hotplug -write /sys/module/msm_thermal/core_control/enabled 1 - -# Enable bus-dcvs -for cpubw in /sys/class/devfreq/*qcom,cpubw* -do - write $cpubw/governor "bw_hwmon" - write $cpubw/polling_interval 50 - write $cpubw/min_freq 1525 - write $cpubw/bw_hwmon/mbps_zones "3143 5859 11863 13763" - write $cpubw/bw_hwmon/sample_ms 4 - write $cpubw/bw_hwmon/io_percent 34 - write $cpubw/bw_hwmon/hist_memory 20 - write $cpubw/bw_hwmon/hyst_length 10 - write $cpubw/bw_hwmon/low_power_ceil_mbps 0 - write $cpubw/bw_hwmon/low_power_io_percent 34 - write $cpubw/bw_hwmon/low_power_delay 20 - write $cpubw/bw_hwmon/guard_band_mbps 0 - write $cpubw/bw_hwmon/up_scale 250 - write $cpubw/bw_hwmon/idle_mbps 1600 -done - -write /sys/class/devfreq/soc:qcom,mincpubw/governor "cpufreq" - diff --git a/init.radio.sh b/init.radio.sh deleted file mode 100644 index cbfa6a1..0000000 --- a/init.radio.sh +++ /dev/null @@ -1,33 +0,0 @@ -#!/system/bin/sh - -# -# Copy qcril.db if needed for RIL -# -if [ -f /vendor/qcril.db -a ! -f /data/misc/radio/qcril.db ]; then - cp /vendor/qcril.db /data/misc/radio/qcril.db - chown -h radio.radio /data/misc/radio/qcril.db -fi -echo 1 > /data/misc/radio/db_check_done - -# -# Make modem config folder and copy firmware config to that folder for RIL -# -if [ -f /data/misc/radio/ver_info.txt ]; then - prev_version_info=`cat /data/misc/radio/ver_info.txt` -else - prev_version_info="" -fi - -cur_version_info=`cat /firmware/verinfo/ver_info.txt` -if [ ! -f /firmware/verinfo/ver_info.txt -o "$prev_version_info" != "$cur_version_info" ]; then - rm -rf /data/misc/radio/modem_config - mkdir /data/misc/radio/modem_config - chmod 770 /data/misc/radio/modem_config - cp -r /firmware/image/modem_pr/mcfg/configs/* /data/misc/radio/modem_config - chown -hR radio.radio /data/misc/radio/modem_config - cp /firmware/verinfo/ver_info.txt /data/misc/radio/ver_info.txt - chown radio.radio /data/misc/radio/ver_info.txt -fi -cp /firmware/image/modem_pr/mbn_ota.txt /data/misc/radio/modem_config -chown radio.radio /data/misc/radio/modem_config/mbn_ota.txt -echo 1 > /data/misc/radio/copy_complete diff --git a/init.recovery.hardware.rc b/init.recovery.hardware.rc deleted file mode 100644 index 4094627..0000000 --- a/init.recovery.hardware.rc +++ /dev/null @@ -1,3 +0,0 @@ -on fs - wait /dev/block/platform/soc/${ro.boot.bootdevice} - symlink /dev/block/platform/soc/${ro.boot.bootdevice} /dev/block/bootdevice diff --git a/liblight/Android.mk b/liblight/Android.mk deleted file mode 100644 index da87af2..0000000 --- a/liblight/Android.mk +++ /dev/null @@ -1,29 +0,0 @@ -# Copyright (C) 2016 The Android Open Source Project -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -LOCAL_PATH:= $(call my-dir) - -include $(CLEAR_VARS) - -LOCAL_SRC_FILES := lights.c -LOCAL_MODULE_RELATIVE_PATH := hw -LOCAL_SHARED_LIBRARIES := libc libcutils liblog -LOCAL_CFLAGS := $(common_flags) \ - -DLOG_TAG=\"qdlights\" \ - -DDEFAULT_LOW_PERSISTENCE_MODE_BRIGHTNESS=$(DEFAULT_LOW_PERSISTENCE_MODE_BRIGHTNESS) -LOCAL_CLANG := true -LOCAL_MODULE := lights.$(TARGET_DEVICE) -LOCAL_MODULE_TAGS := optional - -include $(BUILD_SHARED_LIBRARY) diff --git a/liblight/NOTICE b/liblight/NOTICE deleted file mode 100644 index 7340b9e..0000000 --- a/liblight/NOTICE +++ /dev/null @@ -1,190 +0,0 @@ - - Copyright (c) 2008, The Android Open Source Project - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - - Apache License - Version 2.0, January 2004 - http://www.apache.org/licenses/ - - TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION - - 1. Definitions. - - "License" shall mean the terms and conditions for use, reproduction, - and distribution as defined by Sections 1 through 9 of this document. - - "Licensor" shall mean the copyright owner or entity authorized by - the copyright owner that is granting the License. - - "Legal Entity" shall mean the union of the acting entity and all - other entities that control, are controlled by, or are under common - control with that entity. For the purposes of this definition, - "control" means (i) the power, direct or indirect, to cause the - direction or management of such entity, whether by contract or - otherwise, or (ii) ownership of fifty percent (50%) or more of the - outstanding shares, or (iii) beneficial ownership of such entity. - - "You" (or "Your") shall mean an individual or Legal Entity - exercising permissions granted by this License. - - "Source" form shall mean the preferred form for making modifications, - including but not limited to software source code, documentation - source, and configuration files. - - "Object" form shall mean any form resulting from mechanical - transformation or translation of a Source form, including but - not limited to compiled object code, generated documentation, - and conversions to other media types. - - "Work" shall mean the work of authorship, whether in Source or - Object form, made available under the License, as indicated by a - copyright notice that is included in or attached to the work - (an example is provided in the Appendix below). - - "Derivative Works" shall mean any work, whether in Source or Object - form, that is based on (or derived from) the Work and for which the - editorial revisions, annotations, elaborations, or other modifications - represent, as a whole, an original work of authorship. For the purposes - of this License, Derivative Works shall not include works that remain - separable from, or merely link (or bind by name) to the interfaces of, - the Work and Derivative Works thereof. - - "Contribution" shall mean any work of authorship, including - the original version of the Work and any modifications or additions - to that Work or Derivative Works thereof, that is intentionally - submitted to Licensor for inclusion in the Work by the copyright owner - or by an individual or Legal Entity authorized to submit on behalf of - the copyright owner. For the purposes of this definition, "submitted" - means any form of electronic, verbal, or written communication sent - to the Licensor or its representatives, including but not limited to - communication on electronic mailing lists, source code control systems, - and issue tracking systems that are managed by, or on behalf of, the - Licensor for the purpose of discussing and improving the Work, but - excluding communication that is conspicuously marked or otherwise - designated in writing by the copyright owner as "Not a Contribution." - - "Contributor" shall mean Licensor and any individual or Legal Entity - on behalf of whom a Contribution has been received by Licensor and - subsequently incorporated within the Work. - - 2. Grant of Copyright License. Subject to the terms and conditions of - this License, each Contributor hereby grants to You a perpetual, - worldwide, non-exclusive, no-charge, royalty-free, irrevocable - copyright license to reproduce, prepare Derivative Works of, - publicly display, publicly perform, sublicense, and distribute the - Work and such Derivative Works in Source or Object form. - - 3. Grant of Patent License. Subject to the terms and conditions of - this License, each Contributor hereby grants to You a perpetual, - worldwide, non-exclusive, no-charge, royalty-free, irrevocable - (except as stated in this section) patent license to make, have made, - use, offer to sell, sell, import, and otherwise transfer the Work, - where such license applies only to those patent claims licensable - by such Contributor that are necessarily infringed by their - Contribution(s) alone or by combination of their Contribution(s) - with the Work to which such Contribution(s) was submitted. If You - institute patent litigation against any entity (including a - cross-claim or counterclaim in a lawsuit) alleging that the Work - or a Contribution incorporated within the Work constitutes direct - or contributory patent infringement, then any patent licenses - granted to You under this License for that Work shall terminate - as of the date such litigation is filed. - - 4. Redistribution. You may reproduce and distribute copies of the - Work or Derivative Works thereof in any medium, with or without - modifications, and in Source or Object form, provided that You - meet the following conditions: - - (a) You must give any other recipients of the Work or - Derivative Works a copy of this License; and - - (b) You must cause any modified files to carry prominent notices - stating that You changed the files; and - - (c) You must retain, in the Source form of any Derivative Works - that You distribute, all copyright, patent, trademark, and - attribution notices from the Source form of the Work, - excluding those notices that do not pertain to any part of - the Derivative Works; and - - (d) If the Work includes a "NOTICE" text file as part of its - distribution, then any Derivative Works that You distribute must - include a readable copy of the attribution notices contained - within such NOTICE file, excluding those notices that do not - pertain to any part of the Derivative Works, in at least one - of the following places: within a NOTICE text file distributed - as part of the Derivative Works; within the Source form or - documentation, if provided along with the Derivative Works; or, - within a display generated by the Derivative Works, if and - wherever such third-party notices normally appear. The contents - of the NOTICE file are for informational purposes only and - do not modify the License. You may add Your own attribution - notices within Derivative Works that You distribute, alongside - or as an addendum to the NOTICE text from the Work, provided - that such additional attribution notices cannot be construed - as modifying the License. - - You may add Your own copyright statement to Your modifications and - may provide additional or different license terms and conditions - for use, reproduction, or distribution of Your modifications, or - for any such Derivative Works as a whole, provided Your use, - reproduction, and distribution of the Work otherwise complies with - the conditions stated in this License. - - 5. Submission of Contributions. Unless You explicitly state otherwise, - any Contribution intentionally submitted for inclusion in the Work - by You to the Licensor shall be under the terms and conditions of - this License, without any additional terms or conditions. - Notwithstanding the above, nothing herein shall supersede or modify - the terms of any separate license agreement you may have executed - with Licensor regarding such Contributions. - - 6. Trademarks. This License does not grant permission to use the trade - names, trademarks, service marks, or product names of the Licensor, - except as required for reasonable and customary use in describing the - origin of the Work and reproducing the content of the NOTICE file. - - 7. Disclaimer of Warranty. Unless required by applicable law or - agreed to in writing, Licensor provides the Work (and each - Contributor provides its Contributions) on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or - implied, including, without limitation, any warranties or conditions - of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A - PARTICULAR PURPOSE. You are solely responsible for determining the - appropriateness of using or redistributing the Work and assume any - risks associated with Your exercise of permissions under this License. - - 8. Limitation of Liability. In no event and under no legal theory, - whether in tort (including negligence), contract, or otherwise, - unless required by applicable law (such as deliberate and grossly - negligent acts) or agreed to in writing, shall any Contributor be - liable to You for damages, including any direct, indirect, special, - incidental, or consequential damages of any character arising as a - result of this License or out of the use or inability to use the - Work (including but not limited to damages for loss of goodwill, - work stoppage, computer failure or malfunction, or any and all - other commercial damages or losses), even if such Contributor - has been advised of the possibility of such damages. - - 9. Accepting Warranty or Additional Liability. While redistributing - the Work or Derivative Works thereof, You may choose to offer, - and charge a fee for, acceptance of support, warranty, indemnity, - or other liability obligations and/or rights consistent with this - License. However, in accepting such obligations, You may act only - on Your own behalf and on Your sole responsibility, not on behalf - of any other Contributor, and only if You agree to indemnify, - defend, and hold each Contributor harmless for any liability - incurred by, or claims asserted against, such Contributor by reason - of your accepting any such warranty or additional liability. - - END OF TERMS AND CONDITIONS - diff --git a/liblight/lights.c b/liblight/lights.c deleted file mode 100644 index 7ceec6e..0000000 --- a/liblight/lights.c +++ /dev/null @@ -1,403 +0,0 @@ -/* - * Copyright (C) 2008 The Android Open Source Project - * Copyright (C) 2014 The Linux Foundation. All rights reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include - -#include - -/* - * Change this to 1 to support battery notifications via BatteryService - */ -#define LIGHTS_SUPPORT_BATTERY 0 -#define CG_COLOR_ID_PROPERTY "ro.boot.hardware.color" - -static pthread_once_t g_init = PTHREAD_ONCE_INIT; -static pthread_mutex_t g_lock = PTHREAD_MUTEX_INITIALIZER; -static struct light_state_t g_notification; -static struct light_state_t g_battery; -static int g_last_backlight_mode = BRIGHTNESS_MODE_USER; -static int g_attention = 0; -static int rgb_brightness_ratio = 255; - -char const*const RED_LED_FILE - = "/sys/class/leds/red/brightness"; - -char const*const GREEN_LED_FILE - = "/sys/class/leds/green/brightness"; - -char const*const BLUE_LED_FILE - = "/sys/class/leds/blue/brightness"; - -char const*const LCD_FILE - = "/sys/class/leds/lcd-backlight/brightness"; - -char const*const PERSISTENCE_FILE - = "/sys/class/leds/lcd-backlight/low_persistence"; - -char const*const BUTTON_FILE - = "/sys/class/leds/button-backlight/brightness"; - -char const*const RED_BLINK_FILE - = "/sys/class/leds/red/blink"; - -char const*const GREEN_BLINK_FILE - = "/sys/class/leds/green/blink"; - -char const*const BLUE_BLINK_FILE - = "/sys/class/leds/blue/blink"; - -char const*const RED_ON_OFF_MS_FILE - = "/sys/class/leds/red/on_off_ms"; - -char const*const GREEN_ON_OFF_MS_FILE - = "/sys/class/leds/green/on_off_ms"; - -char const*const BLUE_ON_OFF_MS_FILE - = "/sys/class/leds/blue/on_off_ms"; - -char const*const RED_RGB_START_FILE - = "/sys/class/leds/red/rgb_start"; - -char const*const GREEN_RGB_START_FILE - = "/sys/class/leds/green/rgb_start"; - -char const*const BLUE_RGB_START_FILE - = "/sys/class/leds/blue/rgb_start"; - -/** - * device methods - */ - -void init_globals(void) -{ - char color_id_prop[PROPERTY_VALUE_MAX] = {""}; - - // init the mutex - pthread_mutex_init(&g_lock, NULL); - - // check CG color - property_get(CG_COLOR_ID_PROPERTY, color_id_prop, "DEF00"); - if (strcmp(color_id_prop, "GRA00") == 0) { - rgb_brightness_ratio = 25; - } else if (strcmp(color_id_prop, "SLV00") == 0) { - rgb_brightness_ratio = 15; - } else if (strcmp(color_id_prop, "BLU00") == 0) { - rgb_brightness_ratio = 15; - } else { - rgb_brightness_ratio = 20; - } -} - -static int -write_int(char const* path, int value) -{ - int fd; - static int already_warned = 0; - - fd = open(path, O_WRONLY); - if (fd >= 0) { - char buffer[20]; - size_t bytes = snprintf(buffer, sizeof(buffer), "%d\n", value); - if(bytes >= sizeof(buffer)) return -EINVAL; - ssize_t amt = write(fd, buffer, bytes); - close(fd); - return amt == -1 ? -errno : 0; - } else { - if (already_warned == 0) { - ALOGE("write_int failed to open %s\n", path); - already_warned = 1; - } - return -errno; - } -} - -static int -write_double_int(char const* path, int value1, int value2) -{ - int fd; - static int already_warned = 0; - - fd = open(path, O_WRONLY); - if (fd >= 0) { - char buffer[20]; - size_t bytes = snprintf(buffer, sizeof(buffer), "%d %d\n", value1, value2); - if(bytes >= sizeof(buffer)) return -EINVAL; - ssize_t amt = write(fd, buffer, bytes); - close(fd); - return amt == -1 ? -errno : 0; - } else { - if (already_warned == 0) { - ALOGE("write_int failed to open %s\n", path); - already_warned = 1; - } - return -errno; - } -} - -static int -is_lit(struct light_state_t const* state) -{ - return state->color & 0x00ffffff; -} - -static int -rgb_to_brightness(struct light_state_t const* state) -{ - int color = state->color & 0x00ffffff; - return ((77*((color>>16)&0x00ff)) - + (150*((color>>8)&0x00ff)) + (29*(color&0x00ff))) >> 8; -} - -static int -set_light_backlight(struct light_device_t* dev, - struct light_state_t const* state) -{ - int err = 0; - int brightness = rgb_to_brightness(state); - unsigned int lpEnabled = state->brightnessMode == BRIGHTNESS_MODE_LOW_PERSISTENCE; - if(!dev) { - return -1; - } - - pthread_mutex_lock(&g_lock); - - // If we're not in lp mode and it has been enabled or if we are in lp mode - // and it has been disabled send an ioctl to the display with the update - if ((g_last_backlight_mode != state->brightnessMode && lpEnabled) || - (!lpEnabled && g_last_backlight_mode == BRIGHTNESS_MODE_LOW_PERSISTENCE)) { - if ((err = write_int(PERSISTENCE_FILE, lpEnabled)) != 0) { - ALOGE("%s: Failed to write to %s: %s\n", __FUNCTION__, PERSISTENCE_FILE, - strerror(errno)); - } - if (lpEnabled != 0) { - // This is defined in BoardConfig.mk. - brightness = DEFAULT_LOW_PERSISTENCE_MODE_BRIGHTNESS; - } - } - - g_last_backlight_mode = state->brightnessMode; - - if (!err) { - err = write_int(LCD_FILE, brightness); - } - - pthread_mutex_unlock(&g_lock); - return err; -} - -static int -set_speaker_light_locked(struct light_device_t* dev, - struct light_state_t const* state) -{ - int red, green, blue; - int blink; - int onMS, offMS; - unsigned int colorRGB; - - if(!dev) { - return -1; - } - - switch (state->flashMode) { - case LIGHT_FLASH_TIMED: - onMS = state->flashOnMS; - offMS = state->flashOffMS; - break; - case LIGHT_FLASH_NONE: - default: - onMS = 0; - offMS = 0; - break; - } - - colorRGB = state->color; - -#if 0 - ALOGD("set_speaker_light_locked mode %d, colorRGB=%08X, onMS=%d, offMS=%d\n", - state->flashMode, colorRGB, onMS, offMS); -#endif - - red = ((colorRGB >> 16) & 0xFF) * rgb_brightness_ratio / 255; - green = ((colorRGB >> 8) & 0xFF) * rgb_brightness_ratio / 255; - blue = (colorRGB & 0xFF) * rgb_brightness_ratio / 255; - - write_double_int(RED_ON_OFF_MS_FILE, onMS, offMS); - write_int(RED_LED_FILE, red); - write_double_int(GREEN_ON_OFF_MS_FILE, onMS, offMS); - write_int(GREEN_LED_FILE, green); - write_double_int(BLUE_ON_OFF_MS_FILE, onMS, offMS); - write_int(BLUE_LED_FILE, blue); - - if(!write_int(RED_RGB_START_FILE, 1)) - if(!write_int(GREEN_RGB_START_FILE, 1)) - if(!write_int(BLUE_RGB_START_FILE, 1)) - return -1; - - return 0; -} - -static void -handle_speaker_battery_locked(struct light_device_t* dev) -{ - if (is_lit(&g_battery)) { - set_speaker_light_locked(dev, &g_battery); - } else { - set_speaker_light_locked(dev, &g_notification); - } -} - -#if LIGHTS_SUPPORT_BATTERY -static int -set_light_battery(struct light_device_t* dev, - struct light_state_t const* state) -{ - pthread_mutex_lock(&g_lock); - g_battery = *state; - handle_speaker_battery_locked(dev); - pthread_mutex_unlock(&g_lock); - return 0; -} -#endif - -static int -set_light_notifications(struct light_device_t* dev, - struct light_state_t const* state) -{ - pthread_mutex_lock(&g_lock); - g_notification = *state; - handle_speaker_battery_locked(dev); - pthread_mutex_unlock(&g_lock); - return 0; -} - -static int -set_light_attention(struct light_device_t* dev, - struct light_state_t const* state) -{ - pthread_mutex_lock(&g_lock); - if (state->flashMode == LIGHT_FLASH_HARDWARE) { - g_attention = state->flashOnMS; - } else if (state->flashMode == LIGHT_FLASH_NONE) { - g_attention = 0; - } - handle_speaker_battery_locked(dev); - pthread_mutex_unlock(&g_lock); - return 0; -} - -static int -set_light_buttons(struct light_device_t* dev, - struct light_state_t const* state) -{ - int err = 0; - if(!dev) { - return -1; - } - pthread_mutex_lock(&g_lock); - err = write_int(BUTTON_FILE, state->color & 0xFF); - pthread_mutex_unlock(&g_lock); - return err; -} - -/** Close the lights device */ -static int -close_lights(struct light_device_t *dev) -{ - if (dev) { - free(dev); - } - return 0; -} - - -/******************************************************************************/ - -/** - * module methods - */ - -/** Open a new instance of a lights device using name */ -static int open_lights(const struct hw_module_t* module, char const* name, - struct hw_device_t** device) -{ - int (*set_light)(struct light_device_t* dev, - struct light_state_t const* state); - - if (0 == strcmp(LIGHT_ID_BACKLIGHT, name)) - set_light = set_light_backlight; -#if LIGHTS_SUPPORT_BATTERY - else if (0 == strcmp(LIGHT_ID_BATTERY, name)) - set_light = set_light_battery; -#endif - else if (0 == strcmp(LIGHT_ID_NOTIFICATIONS, name)) - set_light = set_light_notifications; - else if (0 == strcmp(LIGHT_ID_BUTTONS, name)) - set_light = set_light_buttons; - else if (0 == strcmp(LIGHT_ID_ATTENTION, name)) - set_light = set_light_attention; - else - return -EINVAL; - - pthread_once(&g_init, init_globals); - - struct light_device_t *dev = malloc(sizeof(struct light_device_t)); - - if(!dev) - return -ENOMEM; - - memset(dev, 0, sizeof(*dev)); - - dev->common.tag = HARDWARE_DEVICE_TAG; - dev->common.version = LIGHTS_DEVICE_API_VERSION_2_0; - dev->common.module = (struct hw_module_t*)module; - dev->common.close = (int (*)(struct hw_device_t*))close_lights; - dev->set_light = set_light; - - *device = (struct hw_device_t*)dev; - return 0; -} - -static struct hw_module_methods_t lights_module_methods = { - .open = open_lights, -}; - -/* - * The lights Module - */ -struct hw_module_t HAL_MODULE_INFO_SYM = { - .tag = HARDWARE_MODULE_TAG, - .version_major = 1, - .version_minor = 0, - .id = LIGHTS_HARDWARE_MODULE_ID, - .name = "lights Module", - .author = "Google, Inc.", - .methods = &lights_module_methods, -}; diff --git a/lowi.conf b/lowi.conf deleted file mode 100644 index cfadcb2..0000000 --- a/lowi.conf +++ /dev/null @@ -1,51 +0,0 @@ -#*====*====*====*====*====*====*====*====*====*====*====*====*====*====*====* -# -# LOWI Config file -# -# GENERAL DESCRIPTION -# This file contains the config params for LOWI -# -# Copyright (c) 2012-2013 Qualcomm Atheros, Inc. -# All Rights Reserved. -# Qualcomm Atheros Confidential and Proprietary. -# -# Export of this technology or software is regulated by the U.S. Government. -# Diversion contrary to U.S. law prohibited. -#=============================================================================*/ - -# X86 ONLY - UBUNTU: -# Copy this file in the same directory where the executable is - -# The RSSI threshold used in the RTT outlier detection in half decibels. Default value recommended by the -# system team currently is -140 (corresponding to -70 dB). -LOWI_RSSI_THRESHOLD_FOR_RTT = -140 - -# Number of measurment per AP for RTS/CTS -LOWI_RTS_CTS_NUM_MEAS = 5 - -# Maximum Number of Outstanding Requests supported -LOWI_MAX_OUTSTANDING_REQUEST = 255 - -# Maximum number of records in Cache -LOWI_MAX_NUM_CACHE_RECORDS = 200 - -# Default threshold before issuing another fresh scan (ms) -LOWI_FRESH_SCAN_THRESHOLD = 500 - -# Timeout in case no result is reported by the driver (seconds) -LOWI_NO_RESULT_WAIT_TOLERANCE = 10 - -# Use Fake Wifi driver. Only valid for engineering builds -LOWI_USE_FAKE_WIFI_DRIVER = 0 - -# Use ROME Wifi driver. Only valid for engineering builds -# Will be removed later only for development support -LOWI_USE_ROME_WIFI_DRIVER = 0 - -# Use LOWI LP. -# When enabled the Discovery Request will be routed to LOWI-LP -LOWI_USE_LOWI_LP = 1 - -# Log level -# EL_LOG_OFF = 0, EL_ERROR = 1, EL_WARNING = 2, EL_INFO = 3, EL_DEBUG = 4, EL_VERBOSE = 5, EL_LOG_ALL = 100 -LOWI_LOG_LEVEL = 2 diff --git a/manifest.xml b/manifest.xml deleted file mode 100644 index e9bca61..0000000 --- a/manifest.xml +++ /dev/null @@ -1,30 +0,0 @@ - - - android.hardware.light - hwbinder - - 2.0 - - - android.hardware.biometrics.fingerprint - hwbinder - - 2.1 - - IBiometricsFingerprint - fingerprint_hal - - - - android.hardware.graphics.allocator - hwbinder - - 2.0 - - - android.hardware.graphics.mapper - passthrough - - 2.0 - - diff --git a/media_codecs.xml b/media_codecs.xml deleted file mode 100644 index 3d06362..0000000 --- a/media_codecs.xml +++ /dev/null @@ -1,294 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/media_profiles.xml b/media_profiles.xml deleted file mode 100644 index d4b8ae0..0000000 --- a/media_profiles.xml +++ /dev/null @@ -1,554 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -]> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/mixer_paths.xml b/mixer_paths.xml deleted file mode 100644 index 8fb14cc..0000000 --- a/mixer_paths.xml +++ /dev/null @@ -1,2058 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/mixer_paths_tasha.xml b/mixer_paths_tasha.xml deleted file mode 100644 index b765d66..0000000 --- a/mixer_paths_tasha.xml +++ /dev/null @@ -1,1762 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/mixer_paths_tavil.xml b/mixer_paths_tavil.xml deleted file mode 100644 index 07237af..0000000 --- a/mixer_paths_tavil.xml +++ /dev/null @@ -1,1780 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/muskie/BoardConfig.mk b/muskie/BoardConfig.mk index ce55ae5..17f958e 100644 --- a/muskie/BoardConfig.mk +++ b/muskie/BoardConfig.mk @@ -17,4 +17,5 @@ TARGET_BOOTLOADER_BOARD_NAME := muskie DEFAULT_LOW_PERSISTENCE_MODE_BRIGHTNESS := 0x00000056 -include device/google/muskie/CommonBoardConfig.mk +include device/google/wahoo/BoardConfig.mk +-include vendor/google_devices/muskie/BoardConfigVendor.mk diff --git a/muskie/android_filesystem_config.h b/muskie/android_filesystem_config.h deleted file mode 120000 index ccca0c8..0000000 --- a/muskie/android_filesystem_config.h +++ /dev/null @@ -1 +0,0 @@ -../android_filesystem_config.h \ No newline at end of file diff --git a/overlay/frameworks/base/core/res/res/values/config.xml b/overlay/frameworks/base/core/res/res/values/config.xml deleted file mode 100755 index f458dfd..0000000 --- a/overlay/frameworks/base/core/res/res/values/config.xml +++ /dev/null @@ -1,54 +0,0 @@ - - - - - - - true - - - true - - - true - - - - "wlan0" - "softap.*" - - - - com.android.systemui/com.android.systemui.doze.DozeService - - - true - - - com.google.sensor.double_touch - - diff --git a/p2p_supplicant_overlay.conf b/p2p_supplicant_overlay.conf deleted file mode 100644 index acbace2..0000000 --- a/p2p_supplicant_overlay.conf +++ /dev/null @@ -1 +0,0 @@ -disable_scan_offload=1 diff --git a/power/performance.h b/power/performance.h deleted file mode 100755 index b873446..0000000 --- a/power/performance.h +++ /dev/null @@ -1,259 +0,0 @@ -/* Copyright (c) 2012, 2014, The Linux Foundation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are - * met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials provided - * with the distribution. - * * Neither the name of The Linux Foundation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS - * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - */ - -#ifdef __cplusplus -extern "C" { -#endif - -#define FAILED -1 -#define SUCCESS 0 -#define INDEFINITE_DURATION 0 - -enum SCREEN_DISPLAY_TYPE { - DISPLAY_OFF = 0x00FF, -}; - -enum PWR_CLSP_TYPE { - ALL_CPUS_PWR_CLPS_DIS = 0x101, -}; - -/* For CPUx min freq, the leftmost byte - * represents the CPU and the - * rightmost byte represents the frequency - * All intermediate frequencies on the - * device are supported. The hex value - * passed into PerfLock will be multiplied - * by 10^5. This frequency or the next - * highest frequency available will be set - * - * For example, if 1.4 Ghz is required on - * CPU0, use 0x20E - * - * If the highest available frequency - * on the device is required, use - * CPUx_MIN_FREQ_TURBO_MAX - * where x represents the CPU - */ -enum CPU0_MIN_FREQ_LVL { - CPU0_MIN_FREQ_NONTURBO_MAX = 0x20A, - CPU0_MIN_FREQ_TURBO_MAX = 0x2FE, -}; - -enum CPU1_MIN_FREQ_LVL { - CPU1_MIN_FREQ_NONTURBO_MAX = 0x30A, - CPU1_MIN_FREQ_TURBO_MAX = 0x3FE, -}; - -enum CPU2_MIN_FREQ_LVL { - CPU2_MIN_FREQ_NONTURBO_MAX = 0x40A, - CPU2_MIN_FREQ_TURBO_MAX = 0x4FE, -}; - -enum CPU3_MIN_FREQ_LVL { - CPU3_MIN_FREQ_NONTURBO_MAX = 0x50A, - CPU3_MIN_FREQ_TURBO_MAX = 0x5FE, -}; - -enum CPU0_MAX_FREQ_LVL { - CPU0_MAX_FREQ_NONTURBO_MAX = 0x150A, -}; - -enum CPU1_MAX_FREQ_LVL { - CPU1_MAX_FREQ_NONTURBO_MAX = 0x160A, -}; - -enum CPU2_MAX_FREQ_LVL { - CPU2_MAX_FREQ_NONTURBO_MAX = 0x170A, -}; - -enum CPU3_MAX_FREQ_LVL { - CPU3_MAX_FREQ_NONTURBO_MAX = 0x180A, -}; - -enum MIN_CPUS_ONLINE_LVL { - CPUS_ONLINE_MIN_2 = 0x702, - CPUS_ONLINE_MIN_3 = 0x703, - CPUS_ONLINE_MIN_4 = 0x704, - CPUS_ONLINE_MPD_OVERRIDE = 0x777, - CPUS_ONLINE_MAX = 0x7FF, -}; - -enum MAX_CPUS_ONLINE_LVL { - CPUS_ONLINE_MAX_LIMIT_1 = 0x8FE, - CPUS_ONLINE_MAX_LIMIT_2 = 0x8FD, - CPUS_ONLINE_MAX_LIMIT_3 = 0x8FC, - CPUS_ONLINE_MAX_LIMIT_4 = 0x8FB, - CPUS_ONLINE_MAX_LIMIT_MAX = 0x8FB, -}; - -enum SAMPLING_RATE_LVL { - MS_500 = 0xBCD, - MS_50 = 0xBFA, - MS_20 = 0xBFD, -}; - -enum ONDEMAND_IO_BUSY_LVL { - IO_BUSY_OFF = 0xC00, - IO_BUSY_ON = 0xC01, -}; - -enum ONDEMAND_SAMPLING_DOWN_FACTOR_LVL { - SAMPLING_DOWN_FACTOR_1 = 0xD01, - SAMPLING_DOWN_FACTOR_4 = 0xD04, -}; - -enum INTERACTIVE_TIMER_RATE_LVL { - TR_MS_500 = 0xECD, - TR_MS_100 = 0xEF5, - TR_MS_50 = 0xEFA, - TR_MS_30 = 0xEFC, - TR_MS_20 = 0xEFD, -}; - -/* This timer rate applicable to cpu0 - across 8939 series chipset */ -enum INTERACTIVE_TIMER_RATE_LVL_CPU0_8939 { - TR_MS_CPU0_500 = 0x30CD, - TR_MS_CPU0_100 = 0x30F5, - TR_MS_CPU0_50 = 0x30FA, - TR_MS_CPU0_30 = 0x30FC, - TR_MS_CPU0_20 = 0x30FD, -}; - -/* This timer rate applicable to cpu4 - across 8939 series chipset */ -enum INTERACTIVE_TIMER_RATE_LVL_CPU4_8939 { - TR_MS_CPU4_500 = 0x3BCD, - TR_MS_CPU4_100 = 0x3BF5, - TR_MS_CPU4_50 = 0x3BFA, - TR_MS_CPU4_30 = 0x3BFC, - TR_MS_CPU4_20 = 0x3BFD, -}; - -/* This timer rate applicable to big.little arch */ -enum INTERACTIVE_TIMER_RATE_LVL_BIG_LITTLE { - BIG_LITTLE_TR_MS_100 = 0x64, - BIG_LITTLE_TR_MS_50 = 0x32, - BIG_LITTLE_TR_MS_40 = 0x28, - BIG_LITTLE_TR_MS_30 = 0x1E, - BIG_LITTLE_TR_MS_20 = 0x14, -}; - -/* INTERACTIVE opcodes */ -enum INTERACTIVE_OPCODES { - INT_OP_CLUSTER0_TIMER_RATE = 0x41424000, - INT_OP_CLUSTER1_TIMER_RATE = 0x41424100, - INT_OP_CLUSTER0_USE_SCHED_LOAD = 0x41430000, - INT_OP_CLUSTER1_USE_SCHED_LOAD = 0x41430100, - INT_OP_CLUSTER0_USE_MIGRATION_NOTIF = 0x41434000, - INT_OP_CLUSTER1_USE_MIGRATION_NOTIF = 0x41434100, - INT_OP_NOTIFY_ON_MIGRATE = 0x4241C000 -}; - -enum INTERACTIVE_HISPEED_FREQ_LVL { - HS_FREQ_1026 = 0xF0A, -}; - -enum INTERACTIVE_HISPEED_LOAD_LVL { - HISPEED_LOAD_90 = 0x105A, -}; - -enum SYNC_FREQ_LVL { - SYNC_FREQ_300 = 0x1103, - SYNC_FREQ_600 = 0X1106, - SYNC_FREQ_384 = 0x1103, - SYNC_FREQ_NONTURBO_MAX = 0x110A, - SYNC_FREQ_TURBO = 0x110F, -}; - -enum OPTIMAL_FREQ_LVL { - OPTIMAL_FREQ_300 = 0x1203, - OPTIMAL_FREQ_600 = 0x1206, - OPTIMAL_FREQ_384 = 0x1203, - OPTIMAL_FREQ_NONTURBO_MAX = 0x120A, - OPTIMAL_FREQ_TURBO = 0x120F, -}; - -enum SCREEN_PWR_CLPS_LVL { - PWR_CLPS_DIS = 0x1300, - PWR_CLPS_ENA = 0x1301, -}; - -enum THREAD_MIGRATION_LVL { - THREAD_MIGRATION_SYNC_OFF = 0x1400, -}; - -enum INTERACTIVE_IO_BUSY_LVL { - INTERACTIVE_IO_BUSY_OFF = 0x1B00, - INTERACTIVE_IO_BUSY_ON = 0x1B01, -}; - -enum SCHED_BOOST_LVL { - SCHED_BOOST_ON = 0x1E01, -}; - -enum CPU4_MIN_FREQ_LVL { - CPU4_MIN_FREQ_NONTURBO_MAX = 0x1F0A, - CPU4_MIN_FREQ_TURBO_MAX = 0x1FFE, -}; - -enum CPU5_MIN_FREQ_LVL { - CPU5_MIN_FREQ_NONTURBO_MAX = 0x200A, - CPU5_MIN_FREQ_TURBO_MAX = 0x20FE, -}; - -enum CPU6_MIN_FREQ_LVL { - CPU6_MIN_FREQ_NONTURBO_MAX = 0x210A, - CPU6_MIN_FREQ_TURBO_MAX = 0x21FE, -}; - -enum CPU7_MIN_FREQ_LVL { - CPU7_MIN_FREQ_NONTURBO_MAX = 0x220A, - CPU7_MIN_FREQ_TURBO_MAX = 0x22FE, -}; - -enum CPU4_MAX_FREQ_LVL { - CPU4_MAX_FREQ_NONTURBO_MAX = 0x230A, -}; - -enum CPU5_MAX_FREQ_LVL { - CPU5_MAX_FREQ_NONTURBO_MAX = 0x240A, -}; - -enum CPU6_MAX_FREQ_LVL { - CPU6_MAX_FREQ_NONTURBO_MAX = 0x250A, -}; - -enum CPU7_MAX_FREQ_LVL { - CPU7_MAX_FREQ_NONTURBO_MAX = 0x260A, -}; - -#ifdef __cplusplus -} -#endif diff --git a/sec_config b/sec_config deleted file mode 100644 index 23716aa..0000000 --- a/sec_config +++ /dev/null @@ -1,323 +0,0 @@ -/* IPC Security Config */ -/* :: */ -16:4294967295:1000:1021 -/* :: */ -56:4294967295:1021 -/* Allow SS CTL service to be used by system and net_raw processes */ -43:4294967295:1000:3004 -/* :: */ -71:4294967295:1001 -/* :: */ -50:4294967295:1001 -/* QMI-SLIM service permitted to gps and net_raw */ -55:4294967295:1021 -/* Allow Sensor services to be used by sensor process */ -256:4294967295:1000:1006:1013:1021:1047:3011 -257:4294967295:1000:1006:1013:1021:1047:3011 -258:4294967295:1000:1006:1013:1021:1047:3011 -259:4294967295:1000:1006:1013:1021:1047:3011 -260:4294967295:1000:1006:1013:1021:1047:3011 -261:4294967295:1000:1006:1013:1021:1047:3011 -262:4294967295:1000:1006:1013:1021:1047:3011 -263:4294967295:1000:1006:1013:1021:1047:3011 -264:4294967295:1000:1006:1013:1021:1047:3011 -265:4294967295:1000:1006:1013:1021:1047:3011 -266:4294967295:1000:1006:1013:1021:1047:3011 -267:4294967295:1000:1006:1013:1021:1047:3011 -268:4294967295:1000:1006:1013:1021:1047:3011 -269:4294967295:1000:1006:1013:1021:1047:3011 -270:4294967295:1000:1006:1013:1021:1047:3011 -271:4294967295:1000:1006:1013:1021:1047:3011 -272:4294967295:1000:1006:1013:1021:1047:3011 -273:4294967295:1000:1006:1013:1021:1047:3011 -274:4294967295:1000:1006:1013:1021:1047:3011 -275:4294967295:1000:1006:1013:1021:1047:3011 -276:4294967295:1000:1006:1013:1021:1047:3011 -277:4294967295:1000:1006:1013:1021:1047:3011 -278:4294967295:1000:1006:1013:1021:1047:3011 -279:4294967295:1000:1006:1013:1021:1047:3011 -280:4294967295:1000:1006:1013:1021:1047:3011 -281:4294967295:1000:1006:1013:1021:1047:3011 -282:4294967295:1000:1006:1013:1021:1047:3011 -283:4294967295:1000:1006:1013:1021:1047:3011 -284:4294967295:1000:1006:1013:1021:1047:3011 -285:4294967295:1000:1006:1013:1021:1047:3011 -286:4294967295:1000:1006:1013:1021:1047:3011 -287:4294967295:1000:1006:1013:1021:1047:3011 -288:4294967295:1000:1006:1013:1021:1047:3011 -289:4294967295:1000:1006:1013:1021:1047:3011 -290:4294967295:1000:1006:1013:1021:1047:3011 -291:4294967295:1000:1006:1013:1021:1047:3011 -292:4294967295:1000:1006:1013:1021:1047:3011 -293:4294967295:1000:1006:1013:1021:1047:3011 -294:4294967295:1000:1006:1013:1021:1047:3011 -295:4294967295:1000:1006:1013:1021:1047:3011 -296:4294967295:1000:1006:1013:1021:1047:3011 -297:4294967295:1000:1006:1013:1021:1047:3011 -298:4294967295:1000:1006:1013:1021:1047:3011 -299:4294967295:1000:1006:1013:1021:1047:3011 -300:4294967295:1000:1006:1013:1021:1047:3011 -301:4294967295:1000:1006:1013:1021:1047:3011 -302:4294967295:1000:1006:1013:1021:1047:3011 -303:4294967295:1000:1006:1013:1021:1047:3011 -304:4294967295:1000:1006:1013:1021:1047:3011 -305:4294967295:1000:1006:1013:1021:1047:3011 -306:4294967295:1000:1006:1013:1021:1047:3011 -307:4294967295:1000:1006:1013:1021:1047:3011 -308:4294967295:1000:1006:1013:1021:1047:3011 -309:4294967295:1000:1006:1013:1021:1047:3011 -310:4294967295:1000:1006:1013:1021:1047:3011 -311:4294967295:1000:1006:1013:1021:1047:3011 -312:4294967295:1000:1006:1013:1021:1047:3011 -313:4294967295:1000:1006:1013:1021:1047:3011 -314:4294967295:1000:1006:1013:1021:1047:3011 -315:4294967295:1000:1006:1013:1021:1047:3011 -316:4294967295:1000:1006:1013:1021:1047:3011 -317:4294967295:1000:1006:1013:1021:1047:3011 -318:4294967295:1000:1006:1013:1021:1047:3011 -319:4294967295:1000:1006:1013:1021:1047:3011 -320:4294967295:1000:1006:1013:1021:1047:3011 -321:4294967295:1000:1006:1013:1021:1047:3011 -322:4294967295:1000:1006:1013:1021:1047:3011 -323:4294967295:1000:1006:1013:1021:1047:3011 -324:4294967295:1000:1006:1013:1021:1047:3011 -325:4294967295:1000:1006:1013:1021:1047:3011 -326:4294967295:1000:1006:1013:1021:1047:3011 -327:4294967295:1000:1006:1013:1021:1047:3011 -328:4294967295:1000:1006:1013:1021:1047:3011 -329:4294967295:1000:1006:1013:1021:1047:3011 -330:4294967295:1000:1006:1013:1021:1047:3011 -331:4294967295:1000:1006:1013:1021:1047:3011 -332:4294967295:1000:1006:1013:1021:1047:3011 -333:4294967295:1000:1006:1013:1021:1047:3011 -334:4294967295:1000:1006:1013:1021:1047:3011 -335:4294967295:1000:1006:1013:1021:1047:3011 -336:4294967295:1000:1006:1013:1021:1047:3011 -337:4294967295:1000:1006:1013:1021:1047:3011 -338:4294967295:1000:1006:1013:1021:1047:3011 -339:4294967295:1000:1006:1013:1021:1047:3011 -340:4294967295:1000:1006:1013:1021:1047:3011 -341:4294967295:1000:1006:1013:1021:1047:3011 -342:4294967295:1000:1006:1013:1021:1047:3011 -343:4294967295:1000:1006:1013:1021:1047:3011 -344:4294967295:1000:1006:1013:1021:1047:3011 -345:4294967295:1000:1006:1013:1021:1047:3011 -346:4294967295:1000:1006:1013:1021:1047:3011 -347:4294967295:1000:1006:1013:1021:1047:3011 -348:4294967295:1000:1006:1013:1021:1047:3011 -349:4294967295:1000:1006:1013:1021:1047:3011 -350:4294967295:1000:1006:1013:1021:1047:3011 -351:4294967295:1000:1006:1013:1021:1047:3011 -352:4294967295:1000:1006:1013:1021:1047:3011 -353:4294967295:1000:1006:1013:1021:1047:3011 -354:4294967295:1000:1006:1013:1021:1047:3011 -355:4294967295:1000:1006:1013:1021:1047:3011 -356:4294967295:1000:1006:1013:1021:1047:3011 -357:4294967295:1000:1006:1013:1021:1047:3011 -358:4294967295:1000:1006:1013:1021:1047:3011 -359:4294967295:1000:1006:1013:1021:1047:3011 -360:4294967295:1000:1006:1013:1021:1047:3011 -361:4294967295:1000:1006:1013:1021:1047:3011 -362:4294967295:1000:1006:1013:1021:1047:3011 -363:4294967295:1000:1006:1013:1021:1047:3011 -364:4294967295:1000:1006:1013:1021:1047:3011 -365:4294967295:1000:1006:1013:1021:1047:3011 -366:4294967295:1000:1006:1013:1021:1047:3011 -367:4294967295:1000:1006:1013:1021:1047:3011 -368:4294967295:1000:1006:1013:1021:1047:3011 -369:4294967295:1000:1006:1013:1021:1047:3011 -370:4294967295:1000:1006:1013:1021:1047:3011 -371:4294967295:1000:1006:1013:1021:1047:3011 -372:4294967295:1000:1006:1013:1021:1047:3011 -373:4294967295:1000:1006:1013:1021:1047:3011 -374:4294967295:1000:1006:1013:1021:1047:3011 -375:4294967295:1000:1006:1013:1021:1047:3011 -376:4294967295:1000:1006:1013:1021:1047:3011 -377:4294967295:1000:1006:1013:1021:1047:3011 -378:4294967295:1000:1006:1013:1021:1047:3011 -379:4294967295:1000:1006:1013:1021:1047:3011 -380:4294967295:1000:1006:1013:1021:1047:3011 -381:4294967295:1000:1006:1013:1021:1047:3011 -382:4294967295:1000:1006:1013:1021:1047:3011 -383:4294967295:1000:1006:1013:1021:1047:3011 -384:4294967295:1000:1006:1013:1021:1047:3011 -385:4294967295:1000:1006:1013:1021:1047:3011 -386:4294967295:1000:1006:1013:1021:1047:3011 -387:4294967295:1000:1006:1013:1021:1047:3011 -388:4294967295:1000:1006:1013:1021:1047:3011 -389:4294967295:1000:1006:1013:1021:1047:3011 -390:4294967295:1000:1006:1013:1021:1047:3011 -391:4294967295:1000:1006:1013:1021:1047:3011 -392:4294967295:1000:1006:1013:1021:1047:3011 -393:4294967295:1000:1006:1013:1021:1047:3011 -394:4294967295:1000:1006:1013:1021:1047:3011 -395:4294967295:1000:1006:1013:1021:1047:3011 -396:4294967295:1000:1006:1013:1021:1047:3011 -397:4294967295:1000:1006:1013:1021:1047:3011 -398:4294967295:1000:1006:1013:1021:1047:3011 -399:4294967295:1000:1006:1013:1021:1047:3011 -400:4294967295:1000:1006:1013:1021:1047:3011 -401:4294967295:1000:1006:1013:1021:1047:3011 -402:4294967295:1000:1006:1013:1021:1047:3011 -403:4294967295:1000:1006:1013:1021:1047:3011 -404:4294967295:1000:1006:1013:1021:1047:3011 -405:4294967295:1000:1006:1013:1021:1047:3011 -406:4294967295:1000:1006:1013:1021:1047:3011 -407:4294967295:1000:1006:1013:1021:1047:3011 -408:4294967295:1000:1006:1013:1021:1047:3011 -409:4294967295:1000:1006:1013:1021:1047:3011 -410:4294967295:1000:1006:1013:1021:1047:3011 -411:4294967295:1000:1006:1013:1021:1047:3011 -412:4294967295:1000:1006:1013:1021:1047:3011 -413:4294967295:1000:1006:1013:1021:1047:3011 -414:4294967295:1000:1006:1013:1021:1047:3011 -415:4294967295:1000:1006:1013:1021:1047:3011 -416:4294967295:1000:1006:1013:1021:1047:3011 -417:4294967295:1000:1006:1013:1021:1047:3011 -418:4294967295:1000:1006:1013:1021:1047:3011 -419:4294967295:1000:1006:1013:1021:1047:3011 -420:4294967295:1000:1006:1013:1021:1047:3011 -421:4294967295:1000:1006:1013:1021:1047:3011 -422:4294967295:1000:1006:1013:1021:1047:3011 -423:4294967295:1000:1006:1013:1021:1047:3011 -424:4294967295:1000:1006:1013:1021:1047:3011 -425:4294967295:1000:1006:1013:1021:1047:3011 -426:4294967295:1000:1006:1013:1021:1047:3011 -427:4294967295:1000:1006:1013:1021:1047:3011 -428:4294967295:1000:1006:1013:1021:1047:3011 -429:4294967295:1000:1006:1013:1021:1047:3011 -430:4294967295:1000:1006:1013:1021:1047:3011 -431:4294967295:1000:1006:1013:1021:1047:3011 -432:4294967295:1000:1006:1013:1021:1047:3011 -433:4294967295:1000:1006:1013:1021:1047:3011 -434:4294967295:1000:1006:1013:1021:1047:3011 -435:4294967295:1000:1006:1013:1021:1047:3011 -436:4294967295:1000:1006:1013:1021:1047:3011 -437:4294967295:1000:1006:1013:1021:1047:3011 -438:4294967295:1000:1006:1013:1021:1047:3011 -439:4294967295:1000:1006:1013:1021:1047:3011 -440:4294967295:1000:1006:1013:1021:1047:3011 -441:4294967295:1000:1006:1013:1021:1047:3011 -442:4294967295:1000:1006:1013:1021:1047:3011 -443:4294967295:1000:1006:1013:1021:1047:3011 -444:4294967295:1000:1006:1013:1021:1047:3011 -445:4294967295:1000:1006:1013:1021:1047:3011 -446:4294967295:1000:1006:1013:1021:1047:3011 -447:4294967295:1000:1006:1013:1021:1047:3011 -448:4294967295:1000:1006:1013:1021:1047:3011 -449:4294967295:1000:1006:1013:1021:1047:3011 -450:4294967295:1000:1006:1013:1021:1047:3011 -451:4294967295:1000:1006:1013:1021:1047:3011 -452:4294967295:1000:1006:1013:1021:1047:3011 -453:4294967295:1000:1006:1013:1021:1047:3011 -454:4294967295:1000:1006:1013:1021:1047:3011 -455:4294967295:1000:1006:1013:1021:1047:3011 -456:4294967295:1000:1006:1013:1021:1047:3011 -457:4294967295:1000:1006:1013:1021:1047:3011 -458:4294967295:1000:1006:1013:1021:1047:3011 -459:4294967295:1000:1006:1013:1021:1047:3011 -460:4294967295:1000:1006:1013:1021:1047:3011 -461:4294967295:1000:1006:1013:1021:1047:3011 -462:4294967295:1000:1006:1013:1021:1047:3011 -463:4294967295:1000:1006:1013:1021:1047:3011 -464:4294967295:1000:1006:1013:1021:1047:3011 -465:4294967295:1000:1006:1013:1021:1047:3011 -466:4294967295:1000:1006:1013:1021:1047:3011 -467:4294967295:1000:1006:1013:1021:1047:3011 -468:4294967295:1000:1006:1013:1021:1047:3011 -469:4294967295:1000:1006:1013:1021:1047:3011 -470:4294967295:1000:1006:1013:1021:1047:3011 -471:4294967295:1000:1006:1013:1021:1047:3011 -472:4294967295:1000:1006:1013:1021:1047:3011 -473:4294967295:1000:1006:1013:1021:1047:3011 -474:4294967295:1000:1006:1013:1021:1047:3011 -475:4294967295:1000:1006:1013:1021:1047:3011 -476:4294967295:1000:1006:1013:1021:1047:3011 -477:4294967295:1000:1006:1013:1021:1047:3011 -478:4294967295:1000:1006:1013:1021:1047:3011 -479:4294967295:1000:1006:1013:1021:1047:3011 -480:4294967295:1000:1006:1013:1021:1047:3011 -481:4294967295:1000:1006:1013:1021:1047:3011 -482:4294967295:1000:1006:1013:1021:1047:3011 -483:4294967295:1000:1006:1013:1021:1047:3011 -484:4294967295:1000:1006:1013:1021:1047:3011 -485:4294967295:1000:1006:1013:1021:1047:3011 -486:4294967295:1000:1006:1013:1021:1047:3011 -487:4294967295:1000:1006:1013:1021:1047:3011 -488:4294967295:1000:1006:1013:1021:1047:3011 -489:4294967295:1000:1006:1013:1021:1047:3011 -490:4294967295:1000:1006:1013:1021:1047:3011 -491:4294967295:1000:1006:1013:1021:1047:3011 -492:4294967295:1000:1006:1013:1021:1047:3011 -493:4294967295:1000:1006:1013:1021:1047:3011 -494:4294967295:1000:1006:1013:1021:1047:3011 -495:4294967295:1000:1006:1013:1021:1047:3011 -496:4294967295:1000:1006:1013:1021:1047:3011 -497:4294967295:1000:1006:1013:1021:1047:3011 -498:4294967295:1000:1006:1013:1021:1047:3011 -499:4294967295:1000:1006:1013:1021:1047:3011 -500:4294967295:1000:1006:1013:1021:1047:3011 -501:4294967295:1000:1006:1013:1021:1047:3011 -502:4294967295:1000:1006:1013:1021:1047:3011 -503:4294967295:1000:1006:1013:1021:1047:3011 -504:4294967295:1000:1006:1013:1021:1047:3011 -505:4294967295:1000:1006:1013:1021:1047:3011 -506:4294967295:1000:1006:1013:1021:1047:3011 -507:4294967295:1000:1006:1013:1021:1047:3011 -508:4294967295:1000:1006:1013:1021:1047:3011 -509:4294967295:1000:1006:1013:1021:1047:3011 -510:4294967295:1000:1006:1013:1021:1047:3011 -511:4294967295:1000:1006:1013:1021:1047:3011 -/* Allow RCS service to aquire net_raw permission */ -18:4294967295:1001:3004 -/* Allow QMID service to aquire net_raw permission */ -3:4294967295:1001:3004 -2:4294967295:1001:3004 -42:4294967295:1001:3004 -18:4294967295:1001:3004 -9:4294967295:1001:3004 -1:4294967295:1001:3004:1000 -4:4294967295:1001:3004 -7:4294967295:1001:3004 -8:4294967295:1001:3004:1000 -68:4294967295:1001:3004 -/* DPM */ -47:4294967295:1001:3004 -/* Allow communication to some QMI services with radio privilages */ -/* Format is :: */ -/* PBM */ -12:4294967295:1001 -/* WMS */ -5:4294967295:1001 -/* IMS VT */ -32:4294967295:1001 -/* IMSP */ -31:4294967295:1001 -/* PDC */ -36:4294967295:1001 -/* SAR */ -17:4294967295:1001 -/* RFRPE */ -41:4294967295:1001 -/*UIM*/ -11:4294967295:1001 -/*CAT*/ -10:4294967295:1001 -/*IMSA*/ -33:4294967295:1001 -/* CSVT */ -29:4294967295:1001 -/*LTE*/ -70:4294967295:1001 -/* Allow Data dpmd to access QMI DFS */ -48:4294967295:1000:3004 -/* hTC Extended QMI service from modem team. more protocol related */ -229:4294967295:1001 -/* hTC Extended QMI service from modem BSP team */ -230:4294967295:1001 -/* DIAG */ -4097:4294967295:2002:2950:3009 -/* :: */ -69:4294967295:1000 -/* :: */ -57:4294967295:1000 \ No newline at end of file diff --git a/seccomp_policy/mediacodec.policy b/seccomp_policy/mediacodec.policy deleted file mode 100644 index 07b7bf7..0000000 --- a/seccomp_policy/mediacodec.policy +++ /dev/null @@ -1,9 +0,0 @@ -# device specific syscalls -pselect6: 1 -eventfd2: 1 -sendto: 1 -recvfrom: 1 -_llseek: 1 -sysinfo: 1 -getcwd: 1 -getdents64: 1 diff --git a/sensors/hals.conf b/sensors/hals.conf deleted file mode 100644 index 5f3a14b..0000000 --- a/sensors/hals.conf +++ /dev/null @@ -1 +0,0 @@ -sensors.ssc.so diff --git a/sepolicy/adsprpcd.te b/sepolicy/adsprpcd.te deleted file mode 100644 index 350a1e2..0000000 --- a/sepolicy/adsprpcd.te +++ /dev/null @@ -1,8 +0,0 @@ -type adsprpcd, domain; -type adsprpcd_exec, exec_type, file_type; - -init_daemon_domain(adsprpcd) - -userdebug_or_eng(` -permissive adsprpcd; -') diff --git a/sepolicy/audioserver.te b/sepolicy/audioserver.te deleted file mode 100644 index 02c801c..0000000 --- a/sepolicy/audioserver.te +++ /dev/null @@ -1,6 +0,0 @@ -binder_call(audioserver, bootanim) - -allow audioserver perfd_socket:sock_file write; - -allow audioserver sysfs_soc:file r_file_perms; -allow audioserver sysfs_soc:dir search; diff --git a/sepolicy/bluetooth.te b/sepolicy/bluetooth.te deleted file mode 100644 index 851b715..0000000 --- a/sepolicy/bluetooth.te +++ /dev/null @@ -1,6 +0,0 @@ -allow bluetooth wcnss_filter:unix_stream_socket connectto; - -set_prop(bluetooth, wc_prop) - -# Allow access to net_admin ioctls -allowxperm bluetooth self:udp_socket ioctl priv_sock_ioctls; diff --git a/sepolicy/bootanim.te b/sepolicy/bootanim.te deleted file mode 100644 index be41f07..0000000 --- a/sepolicy/bootanim.te +++ /dev/null @@ -1 +0,0 @@ -allow bootanim hwservicemanager:binder call; diff --git a/sepolicy/cameraserver.te b/sepolicy/cameraserver.te deleted file mode 100644 index e392a31..0000000 --- a/sepolicy/cameraserver.te +++ /dev/null @@ -1,6 +0,0 @@ -allow cameraserver gpu_device:chr_file rw_file_perms; - -set_prop(cameraserver, camera_prop) - -allow cameraserver sysfs_camera:file r_file_perms; -allow cameraserver sysfs_camera:dir search; diff --git a/sepolicy/device.te b/sepolicy/device.te deleted file mode 100644 index f407daf..0000000 --- a/sepolicy/device.te +++ /dev/null @@ -1,17 +0,0 @@ -type diag_device, dev_type, mlstrustedobject; -type smd_device, dev_type; -type ipa_dev, dev_type; -type rmnet_device, dev_type; -type at_device, dev_type; -type qsee_ipc_irq_spss_device, dev_type; -type seemplog_device, dev_type; -type spcom_device, dev_type; -type qdsp_device, dev_type, mlstrustedobject; -type dsp_device, dev_type; -type avtimer_device, dev_type; -type ssr_device, dev_type; -type ramdump_device, dev_type; -type hbtp_device, dev_type; -type sg_device, dev_type; -type sdd_block_device, dev_type; -type sdf_block_device, dev_type; diff --git a/sepolicy/domain.te b/sepolicy/domain.te deleted file mode 100644 index 07223d1..0000000 --- a/sepolicy/domain.te +++ /dev/null @@ -1,3 +0,0 @@ -userdebug_or_eng(` - allow domain diag_device:chr_file rw_file_perms; -') diff --git a/sepolicy/file.te b/sepolicy/file.te deleted file mode 100644 index 2af7b47..0000000 --- a/sepolicy/file.te +++ /dev/null @@ -1,28 +0,0 @@ -type sysfs_graphics, sysfs_type, fs_type; -type sysfs_camera, sysfs_type, fs_type; -type sysfs_soc, sysfs_type, fs_type; -type sysfs_rmtfs, sysfs_type, fs_type; -type sysfs_net, sysfs_type, fs_type; -type sysfs_fingerprint, sysfs_type, fs_type; -type sysfs_msm_subsys, sysfs_type, fs_type; -type sysfs_msm_subsys_restart, sysfs_type, fs_type; - -type debugfs_rmt_storage, debugfs_type, fs_type; - -type qmuxd_socket, file_type; -type netmgrd_socket, file_type; -type thermal_socket, file_type; -type perfd_socket, file_type; - -type firmware_file, fs_type, contextmount_type; - -type location_data_file, file_type, data_file_type; - -type persist_file, file_type; -type persist_data_file, file_type; -type persist_display_file, file_type; -type persist_sensors_file, file_type; - -type netmgr_data_file, file_type, data_file_type; - -type ramdump_data_file, file_type, data_file_type, mlstrustedobject; diff --git a/sepolicy/file_contexts b/sepolicy/file_contexts deleted file mode 100644 index 5048b2c..0000000 --- a/sepolicy/file_contexts +++ /dev/null @@ -1,117 +0,0 @@ -# dev nodes -/dev/diag u:object_r:diag_device:s0 -/dev/kgsl-3d0 u:object_r:gpu_device:s0 -/dev/rtc0 u:object_r:rtc_device:s0 -/dev/smd.* u:object_r:smd_device:s0 -# TODO: does ttyMSM0 need to be more specific -/dev/ttyMSM0 u:object_r:tty_device:s0 -/dev/ipa u:object_r:ipa_dev:s0 -/dev/wwan_ioctl u:object_r:ipa_dev:s0 -/dev/ipaNatTable u:object_r:ipa_dev:s0 -/dev/rmnet_ctrl.* u:object_r:rmnet_device:s0 -/dev/at_.* u:object_r:at_device:s0 -/dev/video([0-9])+ u:object_r:video_device:s0 -/dev/media([0-9])+ u:object_r:video_device:s0 -/dev/v4l-subdev.* u:object_r:video_device:s0 -/dev/qseecom u:object_r:tee_device:s0 -/dev/qsee_ipc_irq_spss u:object_r:qsee_ipc_irq_spss_device:s0 -/dev/seemplog u:object_r:seemplog_device:s0 -/dev/spcom u:object_r:spcom_device:s0 -/dev/jpeg[0-9]* u:object_r:video_device:s0 -/dev/adsprpc-smd u:object_r:qdsp_device:s0 -/dev/sdsprpc-smd u:object_r:dsp_device:s0 -/dev/wcd-dsp-glink u:object_r:audio_device:s0 -/dev/msm_.* u:object_r:audio_device:s0 -/dev/avtimer u:object_r:avtimer_device:s0 -/dev/subsys_.* u:object_r:ssr_device:s0 -/dev/ramdump_.* u:object_r:ramdump_device:s0 -/dev/hbtp_input u:object_r:hbtp_device:s0 -/dev/hbtp_vm u:object_r:hbtp_device:s0 -/dev/sg[0-9]+ u:object_r:sg_device:s0 -/dev/sensors u:object_r:sensors_device:s0 - -# dev socket nodes -/dev/socket/qmux_audio(/.*)? u:object_r:qmuxd_socket:s0 -/dev/socket/qmux_bluetooth(/.*)? u:object_r:qmuxd_socket:s0 -/dev/socket/qmux_gps(/.*)? u:object_r:qmuxd_socket:s0 -/dev/socket/qmux_radio(/.*)? u:object_r:qmuxd_socket:s0 -/dev/socket/thermal-send-client u:object_r:thermal_socket:s0 -/dev/socket/thermal-recv-client u:object_r:thermal_socket:s0 -/dev/socket/thermal-recv-passive-client u:object_r:thermal_socket:s0 -/dev/socket/perfd u:object_r:perfd_socket:s0 -/dev/socket/netmgr(/.*)? u:object_r:netmgrd_socket:s0 - -# dev block nodes -/dev/block/sdd[0-9]+ u:object_r:sdd_block_device:s0 -/dev/block/sdf[0-9]+ u:object_r:sdf_block_device:s0 - -# files in sysfs -/sys/class/uio(/.*)? u:object_r:sysfs_uio:s0 -/sys/devices/soc/c900000.qcom,mdss_mdp/c900000.qcom,mdss_mdp:qcom,mdss_fb_primary/leds(/.*)? u:object_r:sysfs_leds:s0 -/sys/devices/soc/800f000.qcom,spmi/spmi-0/spmi0-03/800f000.qcom,spmi:qcom,pmi8998@3:qcom,leds@d000/leds(/.*)? u:object_r:sysfs_leds:s0 -/sys/devices/soc/soc:qcom,ipa_fws@1e08000(/.*)? u:object_r:sysfs_msm_subsys:s0 -/sys/devices/soc/cce0000\.qcom,venus(/.*)? u:object_r:sysfs_msm_subsys:s0 -/sys/devices/soc/0\.qcom,rmtfs_sharedmem(/.*)? u:object_r:sysfs_rmtfs:s0 -/sys/devices/soc/soc:fp_fpc1020(/.*)? u:object_r:sysfs_fingerprint:s0 -/sys/devices/virtual/thermal(/.*)? u:object_r:sysfs_thermal:s0 -/sys/kernel/debug/rmt_storage(/.*)? u:object_r:debugfs_rmt_storage:s0 -/sys/module/msm_thermal(/.*)? u:object_r:sysfs_thermal:s0 -/sys/module/tcp_cubic/parameters(/.*)? u:object_r:sysfs_net:s0 -/sys/devices/virtual/graphics/fb([0-2])+/idle_time u:object_r:sysfs_graphics:s0 -/sys/devices/virtual/net(/.*)? u:object_r:sysfs_net:s0 -/sys/devices/soc/8c0000\.qcom,msm-cam(/.*)? u:object_r:sysfs_camera:s0 -/sys/devices/soc0(/.*)? u:object_r:sysfs_soc:s0 -/sys/devices/soc/caa0000\.qcom,jpeg(/.*)? u:object_r:sysfs_camera:s0 -/sys/devices/soc/caa4000\.qcom,fd(/.*)? u:object_r:sysfs_camera:s0 -/sys/bus/msm_subsys(/.*)? u:object_r:sysfs_msm_subsys:s0 - -# files in /system -/system/bin/init\.power\.sh u:object_r:init_power_exec:s0 -/system/bin/init\.radio\.sh u:object_r:init_radio_exec:s0 -/system/bin/location-mq-s u:object_r:location_exec:s0 -/system/bin/lowi-server u:object_r:location_exec:s0 -/system/bin/ramdump u:object_r:ramdump_exec:s0 - -# files in /vendor -/vendor/bin/perfd u:object_r:perfd_exec:s0 -/vendor/bin/thermal-engine u:object_r:thermal-engine_exec:s0 -/vendor/bin/sensors.qcom u:object_r:sensors_exec:s0 -/vendor/bin/ssr_setup u:object_r:ssr_setup_exec:s0 -/vendor/bin/ssr_diag u:object_r:ssr_diag_exec:s0 -/vendor/bin/pm-service u:object_r:per_mgr_exec:s0 -/vendor/bin/pm-proxy u:object_r:per_proxy_exec:s0 -/vendor/bin/qseecomd u:object_r:tee_exec:s0 -/vendor/bin/time_daemon u:object_r:time_daemon_exec:s0 -/vendor/bin/subsystem_ramdump u:object_r:subsystem_ramdump_exec:s0 -/vendor/bin/adsprpcd u:object_r:adsprpcd_exec:s0 -/vendor/bin/irsc_util u:object_r:irsc_util_exec:s0 -/vendor/bin/rmt_storage u:object_r:rmt_storage_exec:s0 -/vendor/bin/tftp_server u:object_r:rfs_access_exec:s0 -/vendor/bin/cnss-daemon u:object_r:wcnss_service_exec:s0 -/vendor/bin/cnss_diag u:object_r:wcnss_service_exec:s0 -/vendor/bin/netmgrd u:object_r:netmgrd_exec:s0 -/vendor/bin/port-bridge u:object_r:port-bridge_exec:s0 -/vendor/bin/qti u:object_r:qti_exec:s0 -/vendor/bin/wcnss_filter u:object_r:wcnss_filter_exec:s0 -/vendor/bin/loc_launcher u:object_r:location_exec:s0 -/vendor/bin/lowi-server u:object_r:location_exec:s0 -/vendor/bin/pd-mapper u:object_r:pd_mapper_exec:s0 - -# data files -/data/time(/.*)? u:object_r:time_data_file:s0 -/data/misc/radio(/.*)? u:object_r:radio_data_file:s0 -/data/misc/netmgr(/.*)? u:object_r:netmgr_data_file:s0 -/data/misc/location(/.*)? u:object_r:location_data_file:s0 - -# / -/tombstones u:object_r:rootfs:s0 -/dsp u:object_r:rootfs:s0 - -# files in firmware -/firmware(/.*)? u:object_r:firmware_file:s0 - -# /persist -/persist(/.*)? u:object_r:persist_file:s0 -/persist/data(/.*)? u:object_r:persist_data_file:s0 -/persist/display(/.*)? u:object_r:persist_display_file:s0 -/persist/sensors(/.*)? u:object_r:persist_sensors_file:s0 diff --git a/sepolicy/gatekeeperd.te b/sepolicy/gatekeeperd.te deleted file mode 100644 index 647ede2..0000000 --- a/sepolicy/gatekeeperd.te +++ /dev/null @@ -1 +0,0 @@ -set_prop(gatekeeperd, keymaster_prop) diff --git a/sepolicy/hal_fingerprint.te b/sepolicy/hal_fingerprint.te deleted file mode 100644 index ba42783..0000000 --- a/sepolicy/hal_fingerprint.te +++ /dev/null @@ -1,4 +0,0 @@ -allow hal_fingerprint sysfs_fingerprint:file rw_file_perms; -allow hal_fingerprint tee_device:file rw_file_perms; -allow hal_fingerprint tee_device:chr_file rw_file_perms; -allow hal_fingerprint sysfs_fingerprint:dir r_dir_perms; diff --git a/sepolicy/hal_gatekeeper.te b/sepolicy/hal_gatekeeper.te deleted file mode 100644 index fcadc1e..0000000 --- a/sepolicy/hal_gatekeeper.te +++ /dev/null @@ -1 +0,0 @@ -set_prop(hal_gatekeeper, keymaster_prop) diff --git a/sepolicy/init.te b/sepolicy/init.te deleted file mode 100644 index a6155f7..0000000 --- a/sepolicy/init.te +++ /dev/null @@ -1,10 +0,0 @@ -# symlink /sdcard to backing block -allow init tmpfs:lnk_file create; - -allow init self:capability sys_module; -allow init system_file:system module_load; -allow init firmware_file:dir mounton; -allow init configfs:file w_file_perms; -allow init tty_device:chr_file rw_file_perms; - -allow init persist_file:dir mounton; diff --git a/sepolicy/init_power.te b/sepolicy/init_power.te deleted file mode 100644 index 904015d..0000000 --- a/sepolicy/init_power.te +++ /dev/null @@ -1,18 +0,0 @@ -type init_power, domain; -type init_power_exec, exec_type, file_type; - -init_daemon_domain(init_power) - -allow init_power shell_exec:file rx_file_perms; -allow init_power toolbox_exec:file rx_file_perms; - -allow init_power sysfs_thermal:dir search; -allow init_power sysfs_thermal:file w_file_perms; -allow init_power sysfs_devices_system_cpu:file w_file_perms; -allow init_power sysfs_soc:file r_file_perms; -allow init_power sysfs_soc:dir search; - - -userdebug_or_eng(` -permissive init_power; -') diff --git a/sepolicy/init_radio.te b/sepolicy/init_radio.te deleted file mode 100644 index 178828d..0000000 --- a/sepolicy/init_radio.te +++ /dev/null @@ -1,13 +0,0 @@ -# /system/bin/init.radio.sh -type init_radio, domain; -type init_radio_exec, exec_type, file_type; - -init_daemon_domain(init_radio) - -allow init_radio toolbox_exec:file rx_file_perms; -allow init_radio radio_data_file:dir create_dir_perms; -allow init_radio radio_data_file:file create_file_perms; - -userdebug_or_eng(` -permissive init_radio; -') diff --git a/sepolicy/ioctl_defines b/sepolicy/ioctl_defines deleted file mode 100644 index 93a833d..0000000 --- a/sepolicy/ioctl_defines +++ /dev/null @@ -1,7 +0,0 @@ -# socket ioctls defined in the kernel in include/uapi/linux/msm_ipc.h -define(`IPC_ROUTER_IOCTL_GET_VERSION', `0x0000c300') -define(`IPC_ROUTER_IOCTL_GET_MTU', `0x0000c301') -define(`IPC_ROUTER_IOCTL_LOOKUP_SERVER', `0x0000c302') -define(`IPC_ROUTER_IOCTL_GET_CURR_PKT_SIZE', `0x0000c303') -define(`IPC_ROUTER_IOCTL_BIND_CONTROL_PORT', `0x0000c304') -define(`IPC_ROUTER_IOCTL_CONFIG_SEC_RULES', `0x0000c305') diff --git a/sepolicy/ioctl_macros b/sepolicy/ioctl_macros deleted file mode 100644 index dd9a2e8..0000000 --- a/sepolicy/ioctl_macros +++ /dev/null @@ -1,8 +0,0 @@ -define(`msm_sock_ipc_ioctls', `{ -IPC_ROUTER_IOCTL_GET_VERSION -IPC_ROUTER_IOCTL_GET_MTU -IPC_ROUTER_IOCTL_LOOKUP_SERVER -IPC_ROUTER_IOCTL_GET_CURR_PKT_SIZE -IPC_ROUTER_IOCTL_BIND_CONTROL_PORT -IPC_ROUTER_IOCTL_CONFIG_SEC_RULES -}') diff --git a/sepolicy/irsc_util.te b/sepolicy/irsc_util.te deleted file mode 100644 index 746860e..0000000 --- a/sepolicy/irsc_util.te +++ /dev/null @@ -1,11 +0,0 @@ -type irsc_util, domain; -type irsc_util_exec, exec_type, file_type; - -init_daemon_domain(irsc_util) - -allow irsc_util self:socket create_socket_perms; -allowxperm irsc_util self:socket ioctl msm_sock_ipc_ioctls; - -userdebug_or_eng(` -permissive irsc_util; -') diff --git a/sepolicy/kernel.te b/sepolicy/kernel.te deleted file mode 100644 index 9491cd3..0000000 --- a/sepolicy/kernel.te +++ /dev/null @@ -1,4 +0,0 @@ -# for diag over socket -userdebug_or_eng(` - allow kernel self:socket create; -') diff --git a/sepolicy/location.te b/sepolicy/location.te deleted file mode 100644 index 1493992..0000000 --- a/sepolicy/location.te +++ /dev/null @@ -1,28 +0,0 @@ -type location, domain; -type location_exec, exec_type, file_type; - -init_daemon_domain(location) - -# STOPSHIP b/28340421 -# Temporarily grant this permission and log its use. -allow location self:capability { net_admin }; -auditallow location self:capability { net_admin }; - -allow location location_exec:file execute_no_trans; - -allow location self:capability { setgid setuid }; - -allow location proc_net:file r_file_perms; -allow location location_data_file:file w_file_perms; -allow location location_data_file:dir w_dir_perms; -allow location location_data_file:sock_file create_file_perms; - -allow location self:netlink_route_socket create_socket_perms_no_ioctl; -allow location self:udp_socket create_socket_perms; - -# files in /sys -r_dir_file(location, sysfs_type) - -userdebug_or_eng(` -permissive location; -') diff --git a/sepolicy/netmgrd.te b/sepolicy/netmgrd.te deleted file mode 100644 index 97a5948..0000000 --- a/sepolicy/netmgrd.te +++ /dev/null @@ -1,37 +0,0 @@ -type netmgrd, domain; -type netmgrd_exec, exec_type, file_type; - -net_domain(netmgrd) -init_daemon_domain(netmgrd) - -set_prop(netmgrd, net_radio_prop) - -# communicate with netd -unix_socket_connect(netmgrd, netd, netd) - -allow netmgrd netmgrd_socket:dir w_dir_perms; -allow netmgrd netmgrd_socket:sock_file { create setattr }; -allow netmgrd self:netlink_generic_socket create_socket_perms_no_ioctl; -allow netmgrd self:netlink_socket create_socket_perms_no_ioctl; -allow netmgrd self:socket create_socket_perms; -allowxperm netmgrd self:socket ioctl msm_sock_ipc_ioctls; -allowxperm netmgrd self:udp_socket ioctl priv_sock_ioctls; - -allow netmgrd sysfs_net:file rw_file_perms; -allow netmgrd sysfs_net:dir r_dir_perms; -allow netmgrd sysfs_soc:file r_file_perms; -allow netmgrd sysfs_msm_subsys:dir r_dir_perms; -allow netmgrd sysfs_msm_subsys:file r_file_perms; - -allow netmgrd proc_net:file rw_file_perms; -allow netmgrd net_data_file:dir r_dir_perms; -allow netmgrd netmgr_data_file:file rw_file_perms; -allow netmgrd system_file:file execute_no_trans; - -allow netmgrd self:capability { net_admin net_raw setuid }; - -allow netmgrd toolbox_exec:file rx_file_perms; - -userdebug_or_eng(` -permissive netmgrd; -') diff --git a/sepolicy/pd_services.te b/sepolicy/pd_services.te deleted file mode 100644 index 096dd01..0000000 --- a/sepolicy/pd_services.te +++ /dev/null @@ -1,8 +0,0 @@ -type pd_mapper, domain; - -type pd_mapper_exec, exec_type, file_type; -init_daemon_domain(pd_mapper); - -userdebug_or_eng(` -permissive pd_mapper; -') diff --git a/sepolicy/per_mgr.te b/sepolicy/per_mgr.te deleted file mode 100644 index 6cba2eb..0000000 --- a/sepolicy/per_mgr.te +++ /dev/null @@ -1,27 +0,0 @@ -# Policy for pm-service and pm-proxy -type per_mgr, domain; -type per_mgr_exec, exec_type, file_type; - -init_daemon_domain(per_mgr); - -add_service(per_mgr, per_mgr_service) - -binder_use(per_mgr) -binder_call(per_mgr, per_proxy) - -allow per_mgr self:capability net_bind_service; - -allow per_mgr firmware_file:file r_file_perms; -allow per_mgr firmware_file:dir search; -allow per_mgr sysfs_msm_subsys:lnk_file r_file_perms; -allow per_mgr sysfs_msm_subsys:dir r_dir_perms; - -allow per_mgr self:socket create_socket_perms; -allowxperm per_mgr self:socket ioctl msm_sock_ipc_ioctls; -allow per_mgr ssr_device:chr_file { open read }; - -r_dir_file(per_mgr, sysfs) - -userdebug_or_eng(` -permissive per_mgr; -') diff --git a/sepolicy/per_proxy.te b/sepolicy/per_proxy.te deleted file mode 100644 index 8b6e6bd..0000000 --- a/sepolicy/per_proxy.te +++ /dev/null @@ -1,11 +0,0 @@ -# Policy for /system/bin/pm-proxy -type per_proxy, domain; -type per_proxy_exec, exec_type, file_type; - -init_daemon_domain(per_proxy) - -allow per_proxy per_mgr_service:service_manager find; -r_dir_file(per_proxy, sysfs_type) - -binder_use(per_proxy) -binder_call(per_proxy, per_mgr) diff --git a/sepolicy/perfd.te b/sepolicy/perfd.te deleted file mode 100644 index 40bd018..0000000 --- a/sepolicy/perfd.te +++ /dev/null @@ -1,8 +0,0 @@ -type perfd, domain; -type perfd_exec, exec_type, file_type; - -init_daemon_domain(perfd) - -userdebug_or_eng(` -permissive perfd; -') diff --git a/sepolicy/port-bridge.te b/sepolicy/port-bridge.te deleted file mode 100644 index fd302e4..0000000 --- a/sepolicy/port-bridge.te +++ /dev/null @@ -1,10 +0,0 @@ -type port-bridge, domain; -type port-bridge_exec, exec_type, file_type; - -init_daemon_domain(port-bridge) - -allowxperm port-bridge at_device:chr_file ioctl IPC_ROUTER_IOCTL_GET_VERSION; - -userdebug_or_eng(` -permissive port-bridge; -') diff --git a/sepolicy/property.te b/sepolicy/property.te deleted file mode 100644 index 6a207b0..0000000 --- a/sepolicy/property.te +++ /dev/null @@ -1,5 +0,0 @@ -type wc_prop, property_type; -type camera_prop, property_type; -type ssr_prop, property_type; -type tee_listener_prop, property_type; -type keymaster_prop, property_type; diff --git a/sepolicy/property_contexts b/sepolicy/property_contexts deleted file mode 100644 index f321d54..0000000 --- a/sepolicy/property_contexts +++ /dev/null @@ -1,5 +0,0 @@ -wc_transport. u:object_r:wc_prop:s0 -persist.camera. u:object_r:camera_prop:s0 -persist.net.doxlat u:object_r:net_radio_prop:s0 -sys.listeners.registered u:object_r:tee_listener_prop:s0 -sys.keymaster.loaded u:object_r:keymaster_prop:s0 diff --git a/sepolicy/qti.te b/sepolicy/qti.te deleted file mode 100644 index d8f2e98..0000000 --- a/sepolicy/qti.te +++ /dev/null @@ -1,12 +0,0 @@ -type qti, domain; -type qti_exec, exec_type, file_type; - -init_daemon_domain(qti) -net_domain(qti) - -allow qti self:socket create_socket_perms; -allowxperm qti self:socket ioctl msm_sock_ipc_ioctls; - -userdebug_or_eng(` -permissive qti; -') diff --git a/sepolicy/ramdump.te b/sepolicy/ramdump.te deleted file mode 100644 index 12b565c..0000000 --- a/sepolicy/ramdump.te +++ /dev/null @@ -1,7 +0,0 @@ -type ramdump_exec, exec_type, file_type; - -userdebug_or_eng(` -type ramdump, domain; -init_daemon_domain(ramdump) -permissive ramdump; -') diff --git a/sepolicy/rfs_access.te b/sepolicy/rfs_access.te deleted file mode 100644 index 77b5482..0000000 --- a/sepolicy/rfs_access.te +++ /dev/null @@ -1,16 +0,0 @@ -type rfs_access, domain; -type rfs_access_exec, exec_type, file_type; - -init_daemon_domain(rfs_access) - -allow rfs_access persist_file:file rw_file_perms; -allow rfs_access persist_file:dir { getattr setattr remove_name add_name search }; - -allow rfs_access self:capability { chown setpcap }; -allow rfs_access self:capability2 { block_suspend }; - -allow rfs_access self:socket create_socket_perms_no_ioctl; - -userdebug_or_eng(` -permissive rfs_access; -') diff --git a/sepolicy/rild.te b/sepolicy/rild.te deleted file mode 100644 index 93e1c5d..0000000 --- a/sepolicy/rild.te +++ /dev/null @@ -1,11 +0,0 @@ -binder_use(rild) -binder_call(rild, per_mgr) - -allow rild qmuxd_socket:dir w_dir_perms; -allow rild qmuxd_socket:sock_file create; - -allow rild socket_device:sock_file write; -unix_socket_connect(rild, netmgrd, netmgrd) - -allow rild self:socket ioctl; -allowxperm rild self:socket ioctl msm_sock_ipc_ioctls; diff --git a/sepolicy/rmt_storage.te b/sepolicy/rmt_storage.te deleted file mode 100644 index 6008bb5..0000000 --- a/sepolicy/rmt_storage.te +++ /dev/null @@ -1,24 +0,0 @@ -type rmt_storage, domain; -type rmt_storage_exec, exec_type, file_type; - -init_daemon_domain(rmt_storage) - -wakelock_use(rmt_storage) - -allow rmt_storage self:capability { net_bind_service setgid setpcap setuid }; - -allow rmt_storage sdd_block_device:blk_file rw_file_perms; -allow rmt_storage sdf_block_device:blk_file rw_file_perms; -allow rmt_storage uio_device:chr_file rw_file_perms; - -allow rmt_storage sysfs_uio:dir r_dir_perms; -allow rmt_storage sysfs_uio:lnk_file r_file_perms; -allow rmt_storage sysfs_rmtfs:file r_file_perms; - -allow rmt_storage debugfs_rmt_storage:file w_file_perms; - -allow rmt_storage self:socket create_socket_perms_no_ioctl; - -userdebug_or_eng(` -permissive rmt_storage; -') diff --git a/sepolicy/sensors.te b/sepolicy/sensors.te deleted file mode 100644 index b280949..0000000 --- a/sepolicy/sensors.te +++ /dev/null @@ -1,13 +0,0 @@ -# Policy for sensor daemon -type sensors, domain; -type sensors_exec, exec_type, file_type; - -init_daemon_domain(sensors) - -allow sensors self:socket rw_socket_perms_no_ioctl; - -r_dir_file(sensors, sysfs_msm_subsys) - -userdebug_or_eng(` -permissive sensors; -') diff --git a/sepolicy/service.te b/sepolicy/service.te deleted file mode 100644 index 56f1e27..0000000 --- a/sepolicy/service.te +++ /dev/null @@ -1 +0,0 @@ -type per_mgr_service, service_manager_type; diff --git a/sepolicy/service_contexts b/sepolicy/service_contexts deleted file mode 100644 index 3922356..0000000 --- a/sepolicy/service_contexts +++ /dev/null @@ -1 +0,0 @@ -vendor.qcom.PeripheralManager u:object_r:per_mgr_service:s0 diff --git a/sepolicy/ssr_diag.te b/sepolicy/ssr_diag.te deleted file mode 100644 index b1f73c5..0000000 --- a/sepolicy/ssr_diag.te +++ /dev/null @@ -1,8 +0,0 @@ -type ssr_diag, domain; -type ssr_diag_exec, exec_type, file_type; - -init_daemon_domain(ssr_diag); - -userdebug_or_eng(` -permissive ssr_diag; -') diff --git a/sepolicy/ssr_setup.te b/sepolicy/ssr_setup.te deleted file mode 100644 index 40a1c94..0000000 --- a/sepolicy/ssr_setup.te +++ /dev/null @@ -1,8 +0,0 @@ -type ssr_setup, domain; -type ssr_setup_exec, exec_type, file_type; - -init_daemon_domain(ssr_setup); - -userdebug_or_eng(` -permissive ssr_setup; -') diff --git a/sepolicy/subsystem_ramdump.te b/sepolicy/subsystem_ramdump.te deleted file mode 100644 index c691756..0000000 --- a/sepolicy/subsystem_ramdump.te +++ /dev/null @@ -1,8 +0,0 @@ -type subsystem_ramdump, domain; -type subsystem_ramdump_exec, exec_type, file_type; - -init_daemon_domain(subsystem_ramdump); - -userdebug_or_eng(` -permissive subsystem_ramdump; -') diff --git a/sepolicy/surfaceflinger.te b/sepolicy/surfaceflinger.te deleted file mode 100644 index 6ec8e82..0000000 --- a/sepolicy/surfaceflinger.te +++ /dev/null @@ -1 +0,0 @@ -dontaudit surfaceflinger firmware_file:dir search; diff --git a/sepolicy/system_app.te b/sepolicy/system_app.te deleted file mode 100644 index 44b8dfd..0000000 --- a/sepolicy/system_app.te +++ /dev/null @@ -1,6 +0,0 @@ -r_dir_file(system_app, sysfs_msm_subsys) -userdebug_or_eng(` - allow system_app ramdump_data_file:dir r_dir_perms; - allow system_app ramdump_data_file:file r_file_perms; - get_prop(system_app, ssr_prop) -') diff --git a/sepolicy/system_server.te b/sepolicy/system_server.te deleted file mode 100644 index 2ce9c93..0000000 --- a/sepolicy/system_server.te +++ /dev/null @@ -1,5 +0,0 @@ -allow system_server self:socket ioctl; -allowxperm system_server self:socket ioctl msm_sock_ipc_ioctls; - -allow system_server persist_sensors_file:file r_file_perms; -allow system_server persist_sensors_file:dir search; diff --git a/sepolicy/tee.te b/sepolicy/tee.te deleted file mode 100644 index 78365bc..0000000 --- a/sepolicy/tee.te +++ /dev/null @@ -1,10 +0,0 @@ -allow tee self:capability { chown setgid setuid sys_admin sys_rawio }; - -allow tee device:dir r_dir_perms; - -set_prop(tee, tee_listener_prop) -set_prop(tee, keymaster_prop) - -allow tee block_device:dir { getattr search }; -allow tee sdd_block_device:blk_file rw_file_perms; -allow tee sg_device:chr_file { rw_file_perms setattr }; diff --git a/sepolicy/thermal-engine.te b/sepolicy/thermal-engine.te deleted file mode 100644 index 5ec9ed7..0000000 --- a/sepolicy/thermal-engine.te +++ /dev/null @@ -1,19 +0,0 @@ -type thermal-engine, domain; -type thermal-engine_exec, exec_type, file_type; - -init_daemon_domain(thermal-engine) - -allow thermal-engine self:capability2 block_suspend; - -allow thermal-engine sysfs_thermal:dir r_dir_perms; -allow thermal-engine sysfs_thermal:file rw_file_perms; -allow thermal-engine sysfs_rmtfs:file r_file_perms; -allow thermal-engine sysfs_uio:lnk_file r_file_perms; -allow thermal-engine sysfs_uio:dir r_dir_perms; - -allow thermal-engine self:socket create_socket_perms; -allowxperm thermal-engine self:socket ioctl msm_sock_ipc_ioctls; - -userdebug_or_eng(` -permissive thermal-engine; -') diff --git a/sepolicy/time_daemon.te b/sepolicy/time_daemon.te deleted file mode 100644 index 79e3849..0000000 --- a/sepolicy/time_daemon.te +++ /dev/null @@ -1,17 +0,0 @@ -type time_daemon, domain; -type time_daemon_exec, exec_type, file_type; - -init_daemon_domain(time_daemon) - -type time_data_file, file_type, data_file_type; - -allow time_daemon self:socket create_socket_perms; -allowxperm time_daemon self:socket ioctl IPC_ROUTER_IOCTL_LOOKUP_SERVER; - -allow time_daemon rtc_device:chr_file r_file_perms; - -allow time_daemon self:capability { setuid setgid }; - -userdebug_or_eng(` -permissive time_daemon; -') diff --git a/sepolicy/ueventd.te b/sepolicy/ueventd.te deleted file mode 100644 index 52241fc..0000000 --- a/sepolicy/ueventd.te +++ /dev/null @@ -1,8 +0,0 @@ -allow ueventd sysfs_thermal:file w_file_perms; -allow ueventd sysfs_leds:file w_file_perms; -allow ueventd sysfs_camera:file w_file_perms; -allow ueventd sysfs_fingerprint:file w_file_perms; -allow ueventd sysfs_rmtfs:file w_file_perms; -allow ueventd sysfs_soc:file w_file_perms; -allow ueventd sysfs_net:file w_file_perms; -allow ueventd sysfs_msm_subsys:file w_file_perms; diff --git a/sepolicy/wcnss_filter.te b/sepolicy/wcnss_filter.te deleted file mode 100644 index 1f253d2..0000000 --- a/sepolicy/wcnss_filter.te +++ /dev/null @@ -1,10 +0,0 @@ -type wcnss_filter, domain; -type wcnss_filter_exec, exec_type, file_type; - -init_daemon_domain(wcnss_filter) - -set_prop(wcnss_filter, wc_prop) - -userdebug_or_eng(` -permissive wcnss_filter; -') diff --git a/sepolicy/wcnss_service.te b/sepolicy/wcnss_service.te deleted file mode 100644 index 4870fe5..0000000 --- a/sepolicy/wcnss_service.te +++ /dev/null @@ -1,13 +0,0 @@ -type wcnss_service, domain; -type wcnss_service_exec, exec_type, file_type; - -init_daemon_domain(wcnss_service) -net_domain(wcnss_service) - -allow wcnss_service self:socket create_socket_perms; -allowxperm wcnss_service self:socket ioctl IPC_ROUTER_IOCTL_LOOKUP_SERVER; -allow wcnss_service self:netlink_socket read; - -userdebug_or_eng(` -permissive wcnss_service; -') diff --git a/system.prop b/system.prop deleted file mode 100644 index b491b17..0000000 --- a/system.prop +++ /dev/null @@ -1,96 +0,0 @@ - -persist.rild.nitz_plmn= -persist.rild.nitz_long_ons_0= -persist.rild.nitz_long_ons_1= -persist.rild.nitz_long_ons_2= -persist.rild.nitz_long_ons_3= -persist.rild.nitz_short_ons_0= -persist.rild.nitz_short_ons_1= -persist.rild.nitz_short_ons_2= -persist.rild.nitz_short_ons_3= -ril.subscription.types=NV,RUIM -DEVICE_PROVISIONED=1 -# Set network mode to (T/L/G/W/1X/EVDO, T/G/W/L) for 7+5 mode device on DSDS mode -ro.telephony.default_network=22,20 - -debug.sf.hw=1 -debug.gralloc.enable_fb_ubwc=1 - -# system props for the cne module -persist.cne.feature=1 - -# system props for the MM modules -media.stagefright.enable-player=true -media.stagefright.enable-http=true -media.stagefright.enable-aac=true -media.stagefright.enable-qcp=true -media.stagefright.enable-scan=true -mmp.enable.3g2=true -media.aac_51_output_enabled=true -mm.enable.smoothstreaming=true -#13631487 is decimal sum of supported codecs in AAL -#codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD -mm.enable.qcom_parser=13631487 -persist.mm.enable.prefetch=true - -# Additional buffers shared between Camera and Video -vidc.enc.dcvs.extra-buff-count=2 - -# system props for the data netmgrd -persist.data.netmgrd.qos.enable=true -persist.data.mode=concurrent - -# system props for time-services -persist.timed.enable=true - -# System prop to turn on CdmaLTEPhone always -telephony.lteOnCdmaDevice=1 - -# Simulate sdcard on /data/media -persist.fuse_sdcard=true - -# system prop for Bluetooth SOC type -qcom.bluetooth.soc=cherokee - -# system prop for A4WP profile support -ro.bluetooth.a4wp=false - -# system prop for wipower support -ro.bluetooth.wipower=true - -# settings to enable PMD and Device Orientation Sensors -ro.qti.sensors.dev_ori=true -ro.qti.sensors.pmd=true -ro.qti.sensors.sta_detect=true -ro.qti.sensors.mot_detect=true - -#system prop for RmNet Data -persist.rmnet.data.enable=true -persist.data.wda.enable=true -persist.data.df.dl_mode=5 -persist.data.df.ul_mode=5 -persist.data.df.agg.dl_pkt=10 -persist.data.df.agg.dl_size=4096 -persist.data.df.mux_count=8 -persist.data.df.iwlan_mux=9 -persist.data.df.dev_name=rmnet_usb0 - -# -## system props for the data modules -# -#ro.use_data_netmgrd=true -persist.data.netmgrd.qos.enable=true -persist.data.mode=concurrent - -#system prop for Bluetooth SOC type -qcom.bluetooth.soc=cherokee - -#system prop for A4WP profile support -ro.bluetooth.a4wp=false - -#system prop for wipower support -ro.bluetooth.emb_wp_mode=true -ro.bluetooth.wipower=true - -# Property for loading BDA from bdaddress module in kernel -ro.bt.bdaddr_path=/sys/module/bdaddress/parameters/bdaddress diff --git a/ueventd.hardware.rc b/ueventd.hardware.rc deleted file mode 100644 index 21acd3c..0000000 --- a/ueventd.hardware.rc +++ /dev/null @@ -1,100 +0,0 @@ -# -# Copyright (C) 2016 The Android Open-Source Project -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -# the DIAG device node is not world writable/readable. -/dev/diag 0660 system diag - -/dev/kgsl-3d0 0666 system system -/dev/ion 0664 system system -/dev/rtc0 0660 system system -/dev/smd7 0660 bluetooth bluetooth -/dev/ipa 0660 system net_admin -/dev/wwan_ioctl 0660 system net_admin -/dev/ipaNatTable 0660 net_admin net_admin -/dev/rmnet_ctrl 0660 usb usb - -#permissions for CSVT -/dev/smd11 0660 radio radio - -/dev/smdcntl8 0640 radio radio -/dev/at_usb0 0640 radio radio -/dev/at_mdm0 0640 radio radio - -/dev/video* 0660 system camera -/dev/media* 0660 system camera -/dev/v4l-subdev* 0660 system camera - -/dev/qseecom 0660 system drmrpc -/dev/qsee_ipc_irq_spss 0660 system drmrpc -/dev/seemplog 0660 system system -/dev/spcom 0660 system system - -/dev/jpeg0 0660 system camera -/dev/adsprpc-smd 0664 system system - -/dev/hw_random 0600 root root -/dev/sdsprpc-smd 0660 system system - -/dev/wcd-dsp-glink 0660 system audio - -/dev/msm_qcelp 0660 system audio -/dev/msm_evrc 0660 system audio -/dev/msm_wma 0660 system audio -/dev/msm_wmapro 0660 system audio -/dev/msm_alac 0660 system audio -/dev/msm_ape 0660 system audio -/dev/msm_amrnb 0660 system audio -/dev/msm_amrwb 0660 system audio -/dev/msm_amrwbplus 0660 system audio -/dev/msm_aac 0660 system audio -/dev/msm_multi_aac 0660 system audio -/dev/msm_aac_in 0660 system audio -/dev/msm_qcelp_in 0660 system audio -/dev/msm_evrc_in 0660 system audio -/dev/msm_amrnb_in 0640 system audio -/dev/msm_a2dp_in 0660 system audio -/dev/msm_ac3 0660 system audio -/dev/msm_audio_cal 0660 system audio -/dev/msm_hweffects 0660 system audio -/dev/msm_rtac 0660 system audio - -/dev/i2c-5 0660 media media -/dev/avtimer 0660 system audio - -/dev/uio0 0660 system system -/dev/uio1 0660 system system - -# SSR devices -/dev/subsys_* 0640 system system - -# Ramdump devices -/dev/ramdump_* 0640 system system - -#ImproveTouch device -/dev/hbtp_input 0660 system system -/dev/hbtp_vm 0660 system system - -# BT -/dev/ttyHS0 0660 bluetooth net_bt -/dev/btpower 0660 bluetooth net_bt - -# fpc fingerprint -/sys/devices/soc/soc:fp_fpc* irq 0600 system system -/sys/devices/soc/soc:fp_fpc* wakeup_enable 0200 system system - -# Paintbox/Easel -/dev/easelcomm-client 0660 cameraserver camera -/dev/mnh_sm 0660 cameraserver camera diff --git a/utils.mk b/utils.mk deleted file mode 100644 index c823d21..0000000 --- a/utils.mk +++ /dev/null @@ -1,201 +0,0 @@ -# vars for use by utils -empty := -space := $(empty) $(empty) -colon := $(empty):$(empty) -underscore := $(empty)_$(empty) - -# $(call match-word,w1,w2) -# checks if w1 == w2 -# How it works -# if (w1-w2 not empty or w2-w1 not empty) then not_match else match -# -# returns true or empty -#$(warning :$(1): :$(2): :$(subst $(1),,$(2)):) \ -#$(warning :$(2): :$(1): :$(subst $(2),,$(1)):) \ -# -define match-word -$(strip \ - $(if $(or $(subst $(1),$(empty),$(2)),$(subst $(2),$(empty),$(1))),,true) \ -) -endef - -# $(call find-word-in-list,w,wlist) -# finds an exact match of word w in word list wlist -# -# How it works -# fill wlist spaces with colon -# wrap w with colon -# search word w in list wl, if found match m, return stripped word w -# -# returns stripped word or empty -define find-word-in-list -$(strip \ - $(eval wl:= $(colon)$(subst $(space),$(colon),$(strip $(2)))$(colon)) \ - $(eval w:= $(colon)$(strip $(1))$(colon)) \ - $(eval m:= $(findstring $(w),$(wl))) \ - $(if $(m),$(1),) \ -) -endef - -# $(call match-word-in-list,w,wlist) -# does an exact match of word w in word list wlist -# How it works -# if the input word is not empty -# return output of an exact match of word w in wordlist wlist -# else -# return empty -# returns true or empty -define match-word-in-list -$(strip \ - $(if $(strip $(1)), \ - $(call match-word,$(call find-word-in-list,$(1),$(2)),$(strip $(1))), \ - ) \ -) -endef - -# $(call match-prefix,p,delim,w/wlist) -# matches prefix p in wlist using delimiter delim -# -# How it works -# trim the words in wlist w -# if find-word-in-list returns not empty -# return true -# else -# return empty -# -define match-prefix -$(strip \ - $(eval w := $(strip $(1)$(strip $(2)))) \ - $(eval text := $(patsubst $(w)%,$(1),$(3))) \ - $(if $(call match-word-in-list,$(1),$(text)),true,) \ -) -endef - -# ---- -# The following utilities are meant for board platform specific -# featurisation - -# $(call get-vendor-board-platforms,v) -# returns list of board platforms for vendor v -define get-vendor-board-platforms -$($(1)_BOARD_PLATFORMS) -endef - -# $(call is-board-platform,bp) -# returns true or empty -define is-board-platform -$(call match-word,$(1),$(TARGET_BOARD_PLATFORM)) -endef - -# $(call is-not-board-platform,bp) -# returns true or empty -define is-not-board-platform -$(if $(call match-word,$(1),$(TARGET_BOARD_PLATFORM)),,true) -endef - -# $(call is-board-platform-in-list,bpl) -# returns true or empty -define is-board-platform-in-list -$(call match-word-in-list,$(TARGET_BOARD_PLATFORM),$(1)) -endef - -# $(call is-vendor-board-platform,vendor) -# returns true or empty -define is-vendor-board-platform -$(strip \ - $(call match-word-in-list,$(TARGET_BOARD_PLATFORM),\ - $(call get-vendor-board-platforms,$(1)) \ - ) \ -) -endef - -# $(call is-chipset-in-board-platform,chipset) -# does a prefix match of chipset in TARGET_BOARD_PLATFORM -# uses underscore as a delimiter -# -# returns true or empty -define is-chipset-in-board-platform -$(call match-prefix,$(1),$(underscore),$(TARGET_BOARD_PLATFORM)) -endef - -# $(call is-chipset-prefix-in-board-platform,prefix) -# does a chipset prefix match in TARGET_BOARD_PLATFORM -# assumes '_' and 'a' as the delimiter to the chipset prefix -# -# How it works -# if ($(prefix)_ or $(prefix)a match in board platform) -# return true -# else -# return empty -# -define is-chipset-prefix-in-board-platform -$(strip \ - $(eval delim_a := $(empty)a$(empty)) \ - $(if \ - $(or \ - $(call match-prefix,$(1),$(delim_a),$(TARGET_BOARD_PLATFORM)), \ - $(call match-prefix,$(1),$(underscore),$(TARGET_BOARD_PLATFORM)), \ - ), \ - true, \ - ) \ -) -endef - -#---- -# The following utilities are meant for Android Code Name -# specific featurisation -# -# refer http://source.android.com/source/build-numbers.html -# for code names and associated sdk versions -CUPCAKE_SDK_VERSIONS := 3 -DONUT_SDK_VERSIONS := 4 -ECLAIR_SDK_VERSIONS := 5 6 7 -FROYO_SDK_VERSIONS := 8 -GINGERBREAD_SDK_VERSIONS := 9 10 -HONEYCOMB_SDK_VERSIONS := 11 12 13 -ICECREAM_SANDWICH_SDK_VERSIONS := 14 15 -JELLY_BEAN_SDK_VERSIONS := 16 17 18 - -# $(call is-platform-sdk-version-at-least,version) -# version is a numeric SDK_VERSION defined above -define is-platform-sdk-version-at-least -$(strip \ - $(if $(filter 1,$(shell echo "$$(( $(PLATFORM_SDK_VERSION) >= $(1) ))" )), \ - true, \ - ) \ -) -endef - -# $(call is-android-codename,codename) -# codename is one of cupcake,donut,eclair,froyo,gingerbread,icecream -# please refer the $(codename)_SDK_VERSIONS declared above -define is-android-codename -$(strip \ - $(if \ - $(call match-word-in-list,$(PLATFORM_SDK_VERSION),$($(1)_SDK_VERSIONS)), \ - true, \ - ) \ -) -endef - -# $(call is-android-codename-in-list,cnlist) -# cnlist is combination/list of android codenames -define is-android-codename-in-list -$(strip \ - $(eval acn := $(empty)) \ - $(foreach \ - i,$(1),\ - $(eval acn += \ - $(if \ - $(call \ - match-word-in-list,\ - $(PLATFORM_SDK_VERSION),\ - $($(i)_SDK_VERSIONS)\ - ),\ - true,\ - )\ - )\ - ) \ - $(if $(strip $(acn)),true,) \ -) -endef diff --git a/walleye/BoardConfig.mk b/walleye/BoardConfig.mk index 0a492a8..d11aa15 100644 --- a/walleye/BoardConfig.mk +++ b/walleye/BoardConfig.mk @@ -17,4 +17,5 @@ TARGET_BOOTLOADER_BOARD_NAME := walleye DEFAULT_LOW_PERSISTENCE_MODE_BRIGHTNESS := 0x00000056 -include device/google/muskie/CommonBoardConfig.mk +include device/google/wahoo/BoardConfig.mk +-include vendor/google_devices/muskie/BoardConfigVendor.mk diff --git a/walleye/android_filesystem_config.h b/walleye/android_filesystem_config.h deleted file mode 120000 index ccca0c8..0000000 --- a/walleye/android_filesystem_config.h +++ /dev/null @@ -1 +0,0 @@ -../android_filesystem_config.h \ No newline at end of file diff --git a/wifi_concurrency_cfg.txt b/wifi_concurrency_cfg.txt deleted file mode 100644 index fa2764c..0000000 --- a/wifi_concurrency_cfg.txt +++ /dev/null @@ -1,3 +0,0 @@ -ENABLE_STA_SAP_CONCURRENCY:1 -SAP_INTERFACE_NAME:softap0 -SAP_CHANNEL:6 diff --git a/wpa_supplicant_overlay.conf b/wpa_supplicant_overlay.conf deleted file mode 100644 index e1f530d..0000000 --- a/wpa_supplicant_overlay.conf +++ /dev/null @@ -1,3 +0,0 @@ -disable_scan_offload=1 -p2p_disabled=1 -tdls_external_control=1 diff --git a/wpa_supplicant_wcn.conf b/wpa_supplicant_wcn.conf deleted file mode 100644 index 287954e..0000000 --- a/wpa_supplicant_wcn.conf +++ /dev/null @@ -1,830 +0,0 @@ -##### Example wpa_supplicant configuration file ############################### -# -# This file describes configuration file format and lists all available option. -# Please also take a look at simpler configuration examples in 'examples' -# subdirectory. -# -# Empty lines and lines starting with # are ignored - -# NOTE! This file may contain password information and should probably be made -# readable only by root user on multiuser systems. - -# Note: All file paths in this configuration file should use full (absolute, -# not relative to working directory) path in order to allow working directory -# to be changed. This can happen if wpa_supplicant is run in the background. - -# Whether to allow wpa_supplicant to update (overwrite) configuration -# -# This option can be used to allow wpa_supplicant to overwrite configuration -# file whenever configuration is changed (e.g., new network block is added with -# wpa_cli or wpa_gui, or a password is changed). This is required for -# wpa_cli/wpa_gui to be able to store the configuration changes permanently. -# Please note that overwriting configuration file will remove the comments from -# it. -update_config=1 - -# global configuration (shared by all network blocks) -# -# Parameters for the control interface. If this is specified, wpa_supplicant -# will open a control interface that is available for external programs to -# manage wpa_supplicant. The meaning of this string depends on which control -# interface mechanism is used. For all cases, the existance of this parameter -# in configuration is used to determine whether the control interface is -# enabled. -# -# For UNIX domain sockets (default on Linux and BSD): This is a directory that -# will be created for UNIX domain sockets for listening to requests from -# external programs (CLI/GUI, etc.) for status information and configuration. -# The socket file will be named based on the interface name, so multiple -# wpa_supplicant processes can be run at the same time if more than one -# interface is used. -# /var/run/wpa_supplicant is the recommended directory for sockets and by -# default, wpa_cli will use it when trying to connect with wpa_supplicant. -# -# Access control for the control interface can be configured by setting the -# directory to allow only members of a group to use sockets. This way, it is -# possible to run wpa_supplicant as root (since it needs to change network -# configuration and open raw sockets) and still allow GUI/CLI components to be -# run as non-root users. However, since the control interface can be used to -# change the network configuration, this access needs to be protected in many -# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you -# want to allow non-root users to use the control interface, add a new group -# and change this value to match with that group. Add users that should have -# control interface access to this group. If this variable is commented out or -# not included in the configuration file, group will not be changed from the -# value it got by default when the directory or socket was created. -# -# When configuring both the directory and group, use following format: -# DIR=/var/run/wpa_supplicant GROUP=wheel -# DIR=/var/run/wpa_supplicant GROUP=0 -# (group can be either group name or gid) -ctrl_interface=wlan0 - -# IEEE 802.1X/EAPOL version -# wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines -# EAPOL version 2. However, there are many APs that do not handle the new -# version number correctly (they seem to drop the frames completely). In order -# to make wpa_supplicant interoperate with these APs, the version number is set -# to 1 by default. This configuration value can be used to set it to the new -# version (2). -eapol_version=1 - -# AP scanning/selection -# By default, wpa_supplicant requests driver to perform AP scanning and then -# uses the scan results to select a suitable AP. Another alternative is to -# allow the driver to take care of AP scanning and selection and use -# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association -# information from the driver. -# 1: wpa_supplicant initiates scanning and AP selection -# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association -# parameters (e.g., WPA IE generation); this mode can also be used with -# non-WPA drivers when using IEEE 802.1X mode; do not try to associate with -# APs (i.e., external program needs to control association). This mode must -# also be used when using wired Ethernet drivers. -# 2: like 0, but associate with APs using security policy and SSID (but not -# BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to -# enable operation with hidden SSIDs and optimized roaming; in this mode, -# the network blocks in the configuration file are tried one by one until -# the driver reports successful association; each network block should have -# explicit security policy (i.e., only one option in the lists) for -# key_mgmt, pairwise, group, proto variables -ap_scan=1 - -# EAP fast re-authentication -# By default, fast re-authentication is enabled for all EAP methods that -# support it. This variable can be used to disable fast re-authentication. -# Normally, there is no need to disable this. -fast_reauth=1 - -#Disable the default behavior of adding a separate interface for the P2P -#group when driver support for concurrent interfaces is available. -p2p_no_group_iface=1 - -# OpenSSL Engine support -# These options can be used to load OpenSSL engines. -# The two engines that are supported currently are shown below: -# They are both from the opensc project (http://www.opensc.org/) -# By default no engines are loaded. -# make the opensc engine available -#opensc_engine_path=/usr/lib/opensc/engine_opensc.so -# make the pkcs11 engine available -#pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so -# configure the path to the pkcs11 module required by the pkcs11 engine -#pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so - -# Dynamic EAP methods -# If EAP methods were built dynamically as shared object files, they need to be -# loaded here before being used in the network blocks. By default, EAP methods -# are included statically in the build, so these lines are not needed -#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so -#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so - -# Driver interface parameters -# This field can be used to configure arbitrary driver interace parameters. The -# format is specific to the selected driver interface. This field is not used -# in most cases. -#driver_param="field=value" - -# Country code -# The ISO/IEC alpha2 country code for the country in which this device is -# currently operating. -#country=US - -# Maximum lifetime for PMKSA in seconds; default 43200 -#dot11RSNAConfigPMKLifetime=43200 -# Threshold for reauthentication (percentage of PMK lifetime); default 70 -#dot11RSNAConfigPMKReauthThreshold=70 -# Timeout for security association negotiation in seconds; default 60 -#dot11RSNAConfigSATimeout=60 - -# Wi-Fi Protected Setup (WPS) parameters - -# Universally Unique IDentifier (UUID; see RFC 4122) of the device -# If not configured, UUID will be generated based on the local MAC address. -#uuid=12345678-9abc-def0-1234-56789abcdef0 - -# Device Name -# User-friendly description of device; up to 32 octets encoded in UTF-8 -#device_name=Wireless Client - -# Manufacturer -# The manufacturer of the device (up to 64 ASCII characters) -#manufacturer=Company - -# Model Name -# Model of the device (up to 32 ASCII characters) -#model_name=cmodel - -# Model Number -# Additional device description (up to 32 ASCII characters) -#model_number=123 - -# Serial Number -# Serial number of the device (up to 32 characters) -#serial_number=12345 - -# Primary Device Type -# Used format: -- -# categ = Category as an integer value -# OUI = OUI and type octet as a 4-octet hex-encoded value; 0050F204 for -# default WPS OUI -# subcateg = OUI-specific Sub Category as an integer value -# Examples: -# 1-0050F204-1 (Computer / PC) -# 1-0050F204-2 (Computer / Server) -# 5-0050F204-1 (Storage / NAS) -# 6-0050F204-1 (Network Infrastructure / AP) -#device_type=1-0050F204-1 - -# OS Version -# 4-octet operating system version number (hex string) -#os_version=01020300 - -# Credential processing -# 0 = process received credentials internally (default) -# 1 = do not process received credentials; just pass them over ctrl_iface to -# external program(s) -# 2 = process received credentials internally and pass them over ctrl_iface -# to external program(s) -#wps_cred_processing=0 - -# network block -# -# Each network (usually AP's sharing the same SSID) is configured as a separate -# block in this configuration file. The network blocks are in preference order -# (the first match is used). -# -# network block fields: -# -# disabled: -# 0 = this network can be used (default) -# 1 = this network block is disabled (can be enabled through ctrl_iface, -# e.g., with wpa_cli or wpa_gui) -# -# id_str: Network identifier string for external scripts. This value is passed -# to external action script through wpa_cli as WPA_ID_STR environment -# variable to make it easier to do network specific configuration. -# -# ssid: SSID (mandatory); either as an ASCII string with double quotation or -# as hex string; network name -# -# scan_ssid: -# 0 = do not scan this SSID with specific Probe Request frames (default) -# 1 = scan with SSID-specific Probe Request frames (this can be used to -# find APs that do not accept broadcast SSID or use multiple SSIDs; -# this will add latency to scanning, so enable this only when needed) -# -# bssid: BSSID (optional); if set, this network block is used only when -# associating with the AP using the configured BSSID -# -# priority: priority group (integer) -# By default, all networks will get same priority group (0). If some of the -# networks are more desirable, this field can be used to change the order in -# which wpa_supplicant goes through the networks when selecting a BSS. The -# priority groups will be iterated in decreasing priority (i.e., the larger the -# priority value, the sooner the network is matched against the scan results). -# Within each priority group, networks will be selected based on security -# policy, signal strength, etc. -# Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not -# using this priority to select the order for scanning. Instead, they try the -# networks in the order that used in the configuration file. -# -# mode: IEEE 802.11 operation mode -# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default) -# 1 = IBSS (ad-hoc, peer-to-peer) -# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP) -# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan has -# to be set to 2 for IBSS. WPA-None requires following network block options: -# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not -# both), and psk must also be set. -# -# frequency: Channel frequency in megahertz (MHz) for IBSS, e.g., -# 2412 = IEEE 802.11b/g channel 1. This value is used to configure the initial -# channel for IBSS (adhoc) networks. It is ignored in the infrastructure mode. -# In addition, this value is only used by the station that creates the IBSS. If -# an IBSS network with the configured SSID is already present, the frequency of -# the network will be used instead of this configured value. -# -# proto: list of accepted protocols -# WPA = WPA/IEEE 802.11i/D3.0 -# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN) -# If not set, this defaults to: WPA RSN -# -# key_mgmt: list of accepted authenticated key management protocols -# WPA-PSK = WPA pre-shared key (this requires 'psk' field) -# WPA-EAP = WPA using EAP authentication -# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically -# generated WEP keys -# NONE = WPA is not used; plaintext or static WEP could be used -# WPA-PSK-SHA256 = Like WPA-PSK but using stronger SHA256-based algorithms -# WPA-EAP-SHA256 = Like WPA-EAP but using stronger SHA256-based algorithms -# If not set, this defaults to: WPA-PSK WPA-EAP -# -# auth_alg: list of allowed IEEE 802.11 authentication algorithms -# OPEN = Open System authentication (required for WPA/WPA2) -# SHARED = Shared Key authentication (requires static WEP keys) -# LEAP = LEAP/Network EAP (only used with LEAP) -# If not set, automatic selection is used (Open System with LEAP enabled if -# LEAP is allowed as one of the EAP methods). -# -# pairwise: list of accepted pairwise (unicast) ciphers for WPA -# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] -# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] -# NONE = Use only Group Keys (deprecated, should not be included if APs support -# pairwise keys) -# If not set, this defaults to: CCMP TKIP -# -# group: list of accepted group (broadcast/multicast) ciphers for WPA -# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] -# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] -# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key -# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11] -# If not set, this defaults to: CCMP TKIP WEP104 WEP40 -# -# psk: WPA preshared key; 256-bit pre-shared key -# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e., -# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be -# generated using the passphrase and SSID). ASCII passphrase must be between -# 8 and 63 characters (inclusive). -# This field is not needed, if WPA-EAP is used. -# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys -# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant -# startup and reconfiguration time can be optimized by generating the PSK only -# only when the passphrase or SSID has actually changed. -# -# eapol_flags: IEEE 802.1X/EAPOL options (bit field) -# Dynamic WEP key required for non-WPA mode -# bit0 (1): require dynamically generated unicast WEP key -# bit1 (2): require dynamically generated broadcast WEP key -# (3 = require both keys; default) -# Note: When using wired authentication, eapol_flags must be set to 0 for the -# authentication to be completed successfully. -# -# mixed_cell: This option can be used to configure whether so called mixed -# cells, i.e., networks that use both plaintext and encryption in the same -# SSID, are allowed when selecting a BSS form scan results. -# 0 = disabled (default) -# 1 = enabled -# -# proactive_key_caching: -# Enable/disable opportunistic PMKSA caching for WPA2. -# 0 = disabled (default) -# 1 = enabled -# -# wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or -# hex without quotation, e.g., 0102030405) -# wep_tx_keyidx: Default WEP key index (TX) (0..3) -# -# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e DLS) is -# allowed. This is only used with RSN/WPA2. -# 0 = disabled (default) -# 1 = enabled -#peerkey=1 -# -# wpa_ptk_rekey: Maximum lifetime for PTK in seconds. This can be used to -# enforce rekeying of PTK to mitigate some attacks against TKIP deficiencies. -# -# Following fields are only used with internal EAP implementation. -# eap: space-separated list of accepted EAP methods -# MD5 = EAP-MD5 (unsecure and does not generate keying material -> -# cannot be used with WPA; to be used as a Phase 2 method -# with EAP-PEAP or EAP-TTLS) -# MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used -# as a Phase 2 method with EAP-PEAP or EAP-TTLS) -# OTP = EAP-OTP (cannot be used separately with WPA; to be used -# as a Phase 2 method with EAP-PEAP or EAP-TTLS) -# GTC = EAP-GTC (cannot be used separately with WPA; to be used -# as a Phase 2 method with EAP-PEAP or EAP-TTLS) -# TLS = EAP-TLS (client and server certificate) -# PEAP = EAP-PEAP (with tunnelled EAP authentication) -# TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2 -# authentication) -# If not set, all compiled in methods are allowed. -# -# identity: Identity string for EAP -# This field is also used to configure user NAI for -# EAP-PSK/PAX/SAKE/GPSK. -# anonymous_identity: Anonymous identity string for EAP (to be used as the -# unencrypted identity with EAP types that support different tunnelled -# identity, e.g., EAP-TTLS) -# password: Password string for EAP. This field can include either the -# plaintext password (using ASCII or hex string) or a NtPasswordHash -# (16-byte MD4 hash of password) in hash:<32 hex digits> format. -# NtPasswordHash can only be used when the password is for MSCHAPv2 or -# MSCHAP (EAP-MSCHAPv2, EAP-TTLS/MSCHAPv2, EAP-TTLS/MSCHAP, LEAP). -# EAP-PSK (128-bit PSK), EAP-PAX (128-bit PSK), and EAP-SAKE (256-bit -# PSK) is also configured using this field. For EAP-GPSK, this is a -# variable length PSK. -# ca_cert: File path to CA certificate file (PEM/DER). This file can have one -# or more trusted CA certificates. If ca_cert and ca_path are not -# included, server certificate will not be verified. This is insecure and -# a trusted CA certificate should always be configured when using -# EAP-TLS/TTLS/PEAP. Full path should be used since working directory may -# change when wpa_supplicant is run in the background. -# On Windows, trusted CA certificates can be loaded from the system -# certificate store by setting this to cert_store://, e.g., -# ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT". -# Note that when running wpa_supplicant as an application, the user -# certificate store (My user account) is used, whereas computer store -# (Computer account) is used when running wpasvc as a service. -# ca_path: Directory path for CA certificate files (PEM). This path may -# contain multiple CA certificates in OpenSSL format. Common use for this -# is to point to system trusted CA list which is often installed into -# directory like /etc/ssl/certs. If configured, these certificates are -# added to the list of trusted CAs. ca_cert may also be included in that -# case, but it is not required. -# client_cert: File path to client certificate file (PEM/DER) -# Full path should be used since working directory may change when -# wpa_supplicant is run in the background. -# Alternatively, a named configuration blob can be used by setting this -# to blob://. -# private_key: File path to client private key file (PEM/DER/PFX) -# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be -# commented out. Both the private key and certificate will be read from -# the PKCS#12 file in this case. Full path should be used since working -# directory may change when wpa_supplicant is run in the background. -# Windows certificate store can be used by leaving client_cert out and -# configuring private_key in one of the following formats: -# cert://substring_to_match -# hash://certificate_thumbprint_in_hex -# for example: private_key="hash://63093aa9c47f56ae88334c7b65a4" -# Note that when running wpa_supplicant as an application, the user -# certificate store (My user account) is used, whereas computer store -# (Computer account) is used when running wpasvc as a service. -# Alternatively, a named configuration blob can be used by setting this -# to blob://. -# private_key_passwd: Password for private key file (if left out, this will be -# asked through control interface) -# dh_file: File path to DH/DSA parameters file (in PEM format) -# This is an optional configuration file for setting parameters for an -# ephemeral DH key exchange. In most cases, the default RSA -# authentication does not use this configuration. However, it is possible -# setup RSA to use ephemeral DH key exchange. In addition, ciphers with -# DSA keys always use ephemeral DH keys. This can be used to achieve -# forward secrecy. If the file is in DSA parameters format, it will be -# automatically converted into DH params. -# subject_match: Substring to be matched against the subject of the -# authentication server certificate. If this string is set, the server -# sertificate is only accepted if it contains this string in the subject. -# The subject string is in following format: -# /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com -# altsubject_match: Semicolon separated string of entries to be matched against -# the alternative subject name of the authentication server certificate. -# If this string is set, the server sertificate is only accepted if it -# contains one of the entries in an alternative subject name extension. -# altSubjectName string is in following format: TYPE:VALUE -# Example: EMAIL:server@example.com -# Example: DNS:server.example.com;DNS:server2.example.com -# Following types are supported: EMAIL, DNS, URI -# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters -# (string with field-value pairs, e.g., "peapver=0" or -# "peapver=1 peaplabel=1") -# 'peapver' can be used to force which PEAP version (0 or 1) is used. -# 'peaplabel=1' can be used to force new label, "client PEAP encryption", -# to be used during key derivation when PEAPv1 or newer. Most existing -# PEAPv1 implementation seem to be using the old label, "client EAP -# encryption", and wpa_supplicant is now using that as the default value. -# Some servers, e.g., Radiator, may require peaplabel=1 configuration to -# interoperate with PEAPv1; see eap_testing.txt for more details. -# 'peap_outer_success=0' can be used to terminate PEAP authentication on -# tunneled EAP-Success. This is required with some RADIUS servers that -# implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g., -# Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode) -# include_tls_length=1 can be used to force wpa_supplicant to include -# TLS Message Length field in all TLS messages even if they are not -# fragmented. -# sim_min_num_chal=3 can be used to configure EAP-SIM to require three -# challenges (by default, it accepts 2 or 3) -# result_ind=1 can be used to enable EAP-SIM and EAP-AKA to use -# protected result indication. -# 'crypto_binding' option can be used to control PEAPv0 cryptobinding -# behavior: -# * 0 = do not use cryptobinding (default) -# * 1 = use cryptobinding if server supports it -# * 2 = require cryptobinding -# EAP-WSC (WPS) uses following options: pin= or -# pbc=1. -# phase2: Phase2 (inner authentication with TLS tunnel) parameters -# (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or -# "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS) -# Following certificate/private key fields are used in inner Phase2 -# authentication when using EAP-TTLS or EAP-PEAP. -# ca_cert2: File path to CA certificate file. This file can have one or more -# trusted CA certificates. If ca_cert2 and ca_path2 are not included, -# server certificate will not be verified. This is insecure and a trusted -# CA certificate should always be configured. -# ca_path2: Directory path for CA certificate files (PEM) -# client_cert2: File path to client certificate file -# private_key2: File path to client private key file -# private_key2_passwd: Password for private key file -# dh_file2: File path to DH/DSA parameters file (in PEM format) -# subject_match2: Substring to be matched against the subject of the -# authentication server certificate. -# altsubject_match2: Substring to be matched against the alternative subject -# name of the authentication server certificate. -# -# fragment_size: Maximum EAP fragment size in bytes (default 1398). -# This value limits the fragment size for EAP methods that support -# fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set -# small enough to make the EAP messages fit in MTU of the network -# interface used for EAPOL. The default value is suitable for most -# cases. -# -# EAP-FAST variables: -# pac_file: File path for the PAC entries. wpa_supplicant will need to be able -# to create this file and write updates to it when PAC is being -# provisioned or refreshed. Full path to the file should be used since -# working directory may change when wpa_supplicant is run in the -# background. Alternatively, a named configuration blob can be used by -# setting this to blob:// -# phase1: fast_provisioning option can be used to enable in-line provisioning -# of EAP-FAST credentials (PAC): -# 0 = disabled, -# 1 = allow unauthenticated provisioning, -# 2 = allow authenticated provisioning, -# 3 = allow both unauthenticated and authenticated provisioning -# fast_max_pac_list_len= option can be used to set the maximum -# number of PAC entries to store in a PAC list (default: 10) -# fast_pac_format=binary option can be used to select binary format for -# storing PAC entries in order to save some space (the default -# text format uses about 2.5 times the size of minimal binary -# format) -# -# wpa_supplicant supports number of "EAP workarounds" to work around -# interoperability issues with incorrectly behaving authentication servers. -# These are enabled by default because some of the issues are present in large -# number of authentication servers. Strict EAP conformance mode can be -# configured by disabling workarounds with eap_workaround=0. - -# Example blocks: - -# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers -#network={ -# ssid="simple" -# psk="very secret passphrase" -# priority=5 -#} -# -## Same as previous, but request SSID-specific scanning (for APs that reject -## broadcast SSID) -#network={ -# ssid="second ssid" -# scan_ssid=1 -# psk="very secret passphrase" -# priority=2 -#} -# -## Only WPA-PSK is used. Any valid cipher combination is accepted. -#network={ -# ssid="example" -# proto=WPA -# key_mgmt=WPA-PSK -# pairwise=CCMP TKIP -# group=CCMP TKIP WEP104 WEP40 -# psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb -# priority=2 -#} -# -## WPA-Personal(PSK) with TKIP and enforcement for frequent PTK rekeying -#network={ -# ssid="example" -# proto=WPA -# key_mgmt=WPA-PSK -# pairwise=TKIP -# group=TKIP -# psk="not so secure passphrase" -# wpa_ptk_rekey=600 -#} -# -## Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104 -## or WEP40 as the group cipher will not be accepted. -#network={ -# ssid="example" -# proto=RSN -# key_mgmt=WPA-EAP -# pairwise=CCMP TKIP -# group=CCMP TKIP -# eap=TLS -# identity="user@example.com" -# ca_cert="/etc/cert/ca.pem" -# client_cert="/etc/cert/user.pem" -# private_key="/etc/cert/user.prv" -# private_key_passwd="password" -# priority=1 -#} -# -## EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel -## (e.g., Radiator) -#network={ -# ssid="example" -# key_mgmt=WPA-EAP -# eap=PEAP -# identity="user@example.com" -# password="foobar" -# ca_cert="/etc/cert/ca.pem" -# phase1="peaplabel=1" -# phase2="auth=MSCHAPV2" -# priority=10 -#} -# -## EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the -## unencrypted use. Real identity is sent only within an encrypted TLS tunnel. -#network={ -# ssid="example" -# key_mgmt=WPA-EAP -# eap=TTLS -# identity="user@example.com" -# anonymous_identity="anonymous@example.com" -# password="foobar" -# ca_cert="/etc/cert/ca.pem" -# priority=2 -#} -# -## EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted -## use. Real identity is sent only within an encrypted TLS tunnel. -#network={ -# ssid="example" -# key_mgmt=WPA-EAP -# eap=TTLS -# identity="user@example.com" -# anonymous_identity="anonymous@example.com" -# password="foobar" -# ca_cert="/etc/cert/ca.pem" -# phase2="auth=MSCHAPV2" -#} -# -## WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner -## authentication. -#network={ -# ssid="example" -# key_mgmt=WPA-EAP -# eap=TTLS -# # Phase1 / outer authentication -# anonymous_identity="anonymous@example.com" -# ca_cert="/etc/cert/ca.pem" -# # Phase 2 / inner authentication -# phase2="autheap=TLS" -# ca_cert2="/etc/cert/ca2.pem" -# client_cert2="/etc/cer/user.pem" -# private_key2="/etc/cer/user.prv" -# private_key2_passwd="password" -# priority=2 -#} -# -## Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and -## group cipher. -#network={ -# ssid="example" -# bssid=00:11:22:33:44:55 -# proto=WPA RSN -# key_mgmt=WPA-PSK WPA-EAP -# pairwise=CCMP -# group=CCMP -# psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb -#} -# -## Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP -## and all valid ciphers. -#network={ -# ssid=00010203 -# psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f -#} -# -# -## EAP-SIM with a GSM SIM or USIM -#network={ -# ssid="eap-sim-test" -# key_mgmt=WPA-EAP -# eap=SIM -# pin="1234" -# pcsc="" -#} -# -# -## EAP-PSK -#network={ -# ssid="eap-psk-test" -# key_mgmt=WPA-EAP -# eap=PSK -# anonymous_identity="eap_psk_user" -# password=06b4be19da289f475aa46a33cb793029 -# identity="eap_psk_user@example.com" -#} -# -# -## IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using -## EAP-TLS for authentication and key generation; require both unicast and -## broadcast WEP keys. -#network={ -# ssid="1x-test" -# key_mgmt=IEEE8021X -# eap=TLS -# identity="user@example.com" -# ca_cert="/etc/cert/ca.pem" -# client_cert="/etc/cert/user.pem" -# private_key="/etc/cert/user.prv" -# private_key_passwd="password" -# eapol_flags=3 -#} -# -# -## LEAP with dynamic WEP keys -#network={ -# ssid="leap-example" -# key_mgmt=IEEE8021X -# eap=LEAP -# identity="user" -# password="foobar" -#} -# -## EAP-IKEv2 using shared secrets for both server and peer authentication -#network={ -# ssid="ikev2-example" -# key_mgmt=WPA-EAP -# eap=IKEV2 -# identity="user" -# password="foobar" -#} -# -## EAP-FAST with WPA (WPA or WPA2) -#network={ -# ssid="eap-fast-test" -# key_mgmt=WPA-EAP -# eap=FAST -# anonymous_identity="FAST-000102030405" -# identity="username" -# password="password" -# phase1="fast_provisioning=1" -# pac_file="/etc/wpa_supplicant.eap-fast-pac" -#} -# -#network={ -# ssid="eap-fast-test" -# key_mgmt=WPA-EAP -# eap=FAST -# anonymous_identity="FAST-000102030405" -# identity="username" -# password="password" -# phase1="fast_provisioning=1" -# pac_file="blob://eap-fast-pac" -#} -# -## Plaintext connection (no WPA, no IEEE 802.1X) -#network={ -# ssid="plaintext-test" -# key_mgmt=NONE -#} -# -# -## Shared WEP key connection (no WPA, no IEEE 802.1X) -#network={ -# ssid="static-wep-test" -# key_mgmt=NONE -# wep_key0="abcde" -# wep_key1=0102030405 -# wep_key2="1234567890123" -# wep_tx_keyidx=0 -# priority=5 -#} -# -# -## Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key -## IEEE 802.11 authentication -#network={ -# ssid="static-wep-test2" -# key_mgmt=NONE -# wep_key0="abcde" -# wep_key1=0102030405 -# wep_key2="1234567890123" -# wep_tx_keyidx=0 -# priority=5 -# auth_alg=SHARED -#} -# -# -## IBSS/ad-hoc network with WPA-None/TKIP. -#network={ -# ssid="test adhoc" -# mode=1 -# frequency=2412 -# proto=WPA -# key_mgmt=WPA-NONE -# pairwise=NONE -# group=TKIP -# psk="secret passphrase" -#} -# -# -## Catch all example that allows more or less all configuration modes -#network={ -# ssid="example" -# scan_ssid=1 -# key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE -# pairwise=CCMP TKIP -# group=CCMP TKIP WEP104 WEP40 -# psk="very secret passphrase" -# eap=TTLS PEAP TLS -# identity="user@example.com" -# password="foobar" -# ca_cert="/etc/cert/ca.pem" -# client_cert="/etc/cert/user.pem" -# private_key="/etc/cert/user.prv" -# private_key_passwd="password" -# phase1="peaplabel=0" -#} -# -## Example of EAP-TLS with smartcard (openssl engine) -#network={ -# ssid="example" -# key_mgmt=WPA-EAP -# eap=TLS -# proto=RSN -# pairwise=CCMP TKIP -# group=CCMP TKIP -# identity="user@example.com" -# ca_cert="/etc/cert/ca.pem" -# client_cert="/etc/cert/user.pem" -# -# engine=1 -# -# # The engine configured here must be available. Look at -# # OpenSSL engine support in the global section. -# # The key available through the engine must be the private key -# # matching the client certificate configured above. -# -# # use the opensc engine -# #engine_id="opensc" -# #key_id="45" -# -# # use the pkcs11 engine -# engine_id="pkcs11" -# key_id="id_45" -# -# # Optional PIN configuration; this can be left out and PIN will be -# # asked through the control interface -# pin="1234" -#} -# -## Example configuration showing how to use an inlined blob as a CA certificate -## data instead of using external file -#network={ -# ssid="example" -# key_mgmt=WPA-EAP -# eap=TTLS -# identity="user@example.com" -# anonymous_identity="anonymous@example.com" -# password="foobar" -# ca_cert="blob://exampleblob" -# priority=20 -#} -# -#blob-base64-exampleblob={ -#SGVsbG8gV29ybGQhCg== -#} - - -# Wildcard match for SSID (plaintext APs only). This example select any -# open AP regardless of its SSID. -#network={ -# key_mgmt=NONE -#}