mirror of
https://github.com/Evolution-X-Devices/device_google_walleye
synced 2026-01-27 22:40:44 +00:00
f5a29247b4
disable_scoring_for_roam=0 ; Enable BSSID scoring logic for roaming. This is turned off by in the new code drop and so to keep behavior same as 2017, this INI needs to turned on. Set gReportMaxLinkSpeed=0 to report actual link speed Set gGoForce11NFor11AC=1 for P2P GO Bug:69846237 Test: Manual Wifi Test Change-Id: Iaa7dc5ca8fba6a20deb7a56079aa0cffb38c2064
618 lines
16 KiB
INI
618 lines
16 KiB
INI
# This file allows user to override the factory
|
|
# defaults for the WLAN Driver
|
|
|
|
#############################################
|
|
# STA related general configurations
|
|
#############################################
|
|
# Assigned MAC Addresses - This will be used until NV items are in place
|
|
# Each byte of MAC address is represented in Hex format as XX
|
|
Intf0MacAddress=000AF58989FF
|
|
Intf1MacAddress=000AF58989FE
|
|
Intf2MacAddress=000AF58989FD
|
|
Intf3MacAddress=000AF58989FC
|
|
|
|
#Channel Bonding
|
|
gChannelBondingMode5GHz=1
|
|
gChannelBondingMode24GHz=0
|
|
|
|
#Enable Keep alive with non-zero period value
|
|
gStaKeepAlivePeriod=60
|
|
|
|
# Maximum MPDU length (VHT only. Valid values: 0->3895 octets, 1->7991 octets, 2->11454 octets)
|
|
gVhtMpduLen=2
|
|
|
|
# 0 for OLPC 1 for CLPC and SCPC
|
|
gEnableCloseLoop=1
|
|
|
|
ImplicitQosIsEnabled=0
|
|
|
|
# Enable Tx beamforming in VHT20MHz
|
|
# Valid values are 0,1. If commented out, the default value is 0.
|
|
# 0=disable, 1=enable
|
|
gEnableTxBFin20MHz=1
|
|
|
|
#Enable/Disable SU Tx beamformer support.
|
|
gEnableTxSUBeamformer=1
|
|
|
|
# 1=enable tx STBC; 0=disable
|
|
gEnableTXSTBC=1
|
|
|
|
# 1=enable STBC; 0=disable STBC
|
|
gEnableRXSTBC=1
|
|
|
|
# 1=enable rx LDPC; 0=disable
|
|
gEnableRXLDPC=1
|
|
|
|
# Flag to allow STA send AddTspec even when ACM is Off
|
|
gAddTSWhenACMIsOff=1
|
|
|
|
# RTS threshold
|
|
RTSThreshold=1048576
|
|
|
|
# 802.11d support
|
|
g11dSupportEnabled=0
|
|
|
|
|
|
# Phy Mode (auto, b, g, n, etc)
|
|
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
|
|
# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
|
|
# 7 = 11b only 8 = 11ac only.
|
|
gDot11Mode=0
|
|
|
|
# Enable Rx handling options
|
|
# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
|
|
# Rx_thread + NAPI = 5
|
|
rx_mode=5
|
|
|
|
#Enable VHT on 2.4Ghz
|
|
gEnableVhtFor24GHzBand=1
|
|
|
|
# Regulatory Setting; 0=STRICT; 1=CUSTOM
|
|
gRegulatoryChangeCountry=1
|
|
|
|
# userspace country code setting shld take priority
|
|
gCountryCodePriority=1
|
|
|
|
# Enable/Disable LPASS support
|
|
# 0 to disable, 1 to enable
|
|
gEnableLpassSupport=1
|
|
|
|
# Enable(1)/Disable(0) SIFS burst
|
|
gEnableSifsBurst=1
|
|
|
|
# Tx Chain Mask for CCK
|
|
gCckChainMaskEnable=1
|
|
|
|
# Tx Chain Mask for 1SS
|
|
gTxChainMask1ss=0
|
|
|
|
# TPC power
|
|
gSelfGenFrmPwr=3
|
|
|
|
gReportMaxLinkSpeed=0
|
|
################ NAN feature set start ###################
|
|
# Enable or Disable NAN
|
|
# 1=Enable (default), 0=Disable
|
|
gEnableNanSupport=1
|
|
genable_nan_datapath=1
|
|
gnan_datapath_ndi_channel=6
|
|
################ NAN feature set end #####################
|
|
|
|
gIgnorePeerHTopMode=1
|
|
gIgnorePeerErpInfo=1
|
|
|
|
# 802.11n Protection flag
|
|
gEnableApProt=1
|
|
|
|
# Fixed Rate
|
|
gFixedRate=0
|
|
|
|
# Intra-BSS forward
|
|
gDisableIntraBssFwd=0
|
|
|
|
# WMM Enable/Disable
|
|
WmmIsEnabled=0
|
|
|
|
# 802.11h support
|
|
g11hSupportEnabled=1
|
|
|
|
#Short Guard Interval Enable/disable
|
|
gShortGI20Mhz=1
|
|
gShortGI40Mhz=1
|
|
|
|
#Auto Shutdown wlan : Value in Seconds. 0 means disabled. Max 1 day = 86400 sec
|
|
gWlanAutoShutdown=0
|
|
|
|
#Preferred band (both or 2.4 only or 5 only)
|
|
BandCapability=0
|
|
|
|
gVhtChannelWidth=2
|
|
|
|
# Enable Tx beamforming
|
|
gTxBFEnable=1
|
|
|
|
# Set txchainmask and rxchainmask
|
|
# These parameters are used only if gEnable2x2 is 0
|
|
# Valid values are 1,2
|
|
# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
|
|
# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
|
|
gSetTxChainmask1x1=1
|
|
gSetRxChainmask1x1=1
|
|
|
|
#If set to 0, MCC is not allowed.
|
|
gEnableMCCMode=1
|
|
|
|
# MCC to SCC Switch mode: 0-Disable 1-Enable 2-Force SCC if same band
|
|
gWlanMccToSccSwitchMode = 0
|
|
|
|
# Maximum Receive AMPDU size (VHT only. Valid values: 0->8k 1->16k 2->32k 3->64k 4->128k)
|
|
gVhtAmpduLenExponent=7
|
|
|
|
# Maximum number of concurrent connections
|
|
gMaxConcurrentActiveSessions=3
|
|
|
|
# Radar PRI multiplier
|
|
gDFSradarMappingPriMultiplier=4
|
|
|
|
# Enable or Disable Multi-user MIMO
|
|
# 1=Enable (default), 0=Disable
|
|
gEnableMuBformee=1
|
|
|
|
# Enable to check FW hash if secure FW feature is enabled. It's for defconfig
|
|
# builds only since it will be ignored in performance/release builds.
|
|
gEnableFWHashCheck=1
|
|
|
|
# Enable or Disable MCC Adaptive Scheduler at the FW
|
|
# 1=Enable (default), 0=Disable
|
|
gEnableMCCAdaptiveScheduler=1
|
|
|
|
# Disable/Enable GreenAP
|
|
# 0 to disable, 1 to enable, default: 1
|
|
gEnableGreenAp=0
|
|
|
|
################ Datapath feature set Begin ################
|
|
# Bus bandwidth threshold values in terms of number of packets
|
|
gBusBandwidthHighThreshold=2000
|
|
gBusBandwidthMediumThreshold=500
|
|
gBusBandwidthLowThreshold=150
|
|
|
|
# Bus bandwidth compute timeout value in ms
|
|
gBusBandwidthComputeInterval=100
|
|
|
|
# VHT Tx/Rx MCS values
|
|
# Valid values are 0,1,2. If commented out, the default value is 0.
|
|
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
|
gVhtRxMCS=2
|
|
gVhtTxMCS=2
|
|
|
|
# VHT Tx/Rx MCS values for 2x2
|
|
# Valid values are 0,1,2. If commented out, the default value is 0.
|
|
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
|
gEnable2x2=1
|
|
gVhtRxMCS2x2=2
|
|
gVhtTxMCS2x2=2
|
|
|
|
#IPA config is a bit mask and following are the configurations.
|
|
#bit0 IPA Enable
|
|
#bit1 IPA PRE Filter enable
|
|
#bit2 IPv6 enable
|
|
#bit3 IPA Resource Manager (RM) enable
|
|
#bit4 IPA Clock scaling enable
|
|
#bit5 IPA uC ENABLE
|
|
#bit6 IPA uC STA ENABLE
|
|
#bit8 IPA Real Time Debugging
|
|
gIPAConfig=0x3d
|
|
gIPADescSize=800
|
|
|
|
# Enable/Disable RX full reorder offload
|
|
gReorderOffloadSupported=1
|
|
|
|
# Enable CE classification
|
|
# 1 - enable(default) 0 - disable
|
|
gCEClassifyEnable=1
|
|
|
|
# Enable(Tx) fastpath for data traffic.
|
|
# 1 - enable(default) 0 - disable
|
|
gEnableFastPath=1
|
|
|
|
# This flag enables IP, TCP and UDP checksum offload
|
|
# 1 - enable(default) 0 - disable
|
|
gEnableIpTcpUdpChecksumOffload=1
|
|
|
|
# Enable TCP Segmentation Offload
|
|
# 1 - enable 0 - disable
|
|
TSOEnable=0
|
|
|
|
# Enable Large Recieve Offload
|
|
# 1 - enable(default) 0 - disable
|
|
LROEnable=1
|
|
|
|
# Enable HT MPDU Density
|
|
# 4 for 2 micro sec
|
|
ght_mpdu_density=4
|
|
|
|
# Enable flow steering to enable multiple CEs for Rx flows.
|
|
# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
|
|
# Parallel Rx paths.
|
|
# 1 - enable 0 - disable(default)
|
|
gEnableFlowSteering=1
|
|
|
|
ce_service_max_yield_time=500
|
|
ce_service_max_rx_ind_flush=1
|
|
maxMSDUsPerRxInd=8
|
|
|
|
################ Datapath feature set End ################
|
|
|
|
#############################################
|
|
# SCAN related configurations
|
|
#############################################
|
|
# Enable/Disable Idle Scan
|
|
gEnableIdleScan=0
|
|
|
|
#Enable Scan Results Aging based on timer
|
|
#Timer value is in seconds
|
|
#If Set to 0 it will not enable the feature
|
|
gScanAgingTime=30
|
|
|
|
#Enable Scan Results Aging based on number of scans
|
|
gScanResultAgeCount=1
|
|
|
|
#Enable thermal mitigation
|
|
gThermalMitigationEnable=0
|
|
|
|
#Maximum Channel time in msec
|
|
gMaxMediumTime=6000
|
|
|
|
# Scan Timing Parameters
|
|
# gPassiveMaxChannelTime=110
|
|
# gPassiveMinChannelTime=60
|
|
gActiveMaxChannelTime=40
|
|
gActiveMinChannelTime=20
|
|
|
|
gPNOScanSupport=1
|
|
|
|
# Enable or Disable Extended Scan (GScan)
|
|
# 1=Enable (default), 0=Disable
|
|
gExtScanEnable=1
|
|
|
|
#If set will start with active scan after driver load, otherwise will start with
|
|
#passive scan to find out the domain
|
|
gEnableBypass11d=1
|
|
|
|
#If set to 0, will not scan DFS channels
|
|
gEnableDFSChnlScan=1
|
|
|
|
#Maxium Channel time in msec
|
|
gMaxMediumTime = 6000
|
|
|
|
adaptive_dwell_mode_enabled=1
|
|
|
|
hostscan_adaptive_dwell_mode=1
|
|
|
|
adapt_dwell_lpf_weight=80
|
|
|
|
adapt_dwell_wifi_act_threshold=10
|
|
|
|
# Enable or disable Probe Req Information Element whitelist. When enabled, IEs corresponding to bits
|
|
# set in bitmaps are allowed in probe request, all others removed while device is unassociated
|
|
# with an AP
|
|
# 1=Enable, 0=Disable (default)
|
|
g_enable_probereq_whitelist_ies=1
|
|
|
|
# ie bitmap examples: <bitmap_name>=<value> [<Allowed Information elements>]
|
|
# g_probe_req_ie_bitmap_0=0x80000009 #[0, 3, 31]
|
|
# g_probe_req_ie_bitmap_0=0x00000000 #[] (default)
|
|
# g_probe_req_ie_bitmap_1=0x80000009 #[32, 35, 63]
|
|
g_probe_req_ie_bitmap_0=0x0000000B
|
|
# g_probe_req_ie_bitmap_1=0x00000000
|
|
# g_probe_req_ie_bitmap_2=0x00000000
|
|
# g_probe_req_ie_bitmap_3=0x00000000
|
|
# g_probe_req_ie_bitmap_4=0x00000000
|
|
# g_probe_req_ie_bitmap_5=0x00000000
|
|
# g_probe_req_ie_bitmap_6=0x00000000
|
|
# g_probe_req_ie_bitmap_7=0x00000000
|
|
|
|
#############################################
|
|
# Power related configurations
|
|
#############################################
|
|
# Enable IMPS or not
|
|
gEnableImps=1
|
|
|
|
# Enable BMPS or not
|
|
gEnableBmps=1
|
|
|
|
# Increase sleep duration (seconds) during IMPS
|
|
# 0 implies no periodic wake up from IMPS. Periodic wakeup is
|
|
# unnecessary if Idle Scan is disabled.
|
|
gImpsModSleepTime=0
|
|
|
|
# UAPSD service interval for VO,VI, BE, BK traffic
|
|
InfraUapsdVoSrvIntv=0
|
|
InfraUapsdViSrvIntv=0
|
|
InfraUapsdBeSrvIntv=0
|
|
InfraUapsdBkSrvIntv=0
|
|
|
|
# Enable suspend or not
|
|
# 1: Enable standby, 2: Enable Deep sleep, 3: Enable Mcast/Bcast Filter
|
|
gEnableSuspend=3
|
|
|
|
#Enable Power Save offload
|
|
gEnablePowerSaveOffload=2
|
|
|
|
#Enable Power saving mechanism Based on Android Framework
|
|
#If set to 0 Driver internally control the Power saving mechanism
|
|
#If set to 1 Android Framwrok control the Power saving mechanism
|
|
isAndroidPsEn=0
|
|
|
|
beaconEarlyTerminationWakeInterval=3
|
|
|
|
#Data Inactivity Timeout when in powersave (in ms)
|
|
gDataInactivityTimeout=200
|
|
|
|
# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
|
|
gIbssTxSpEndInactivityTime=10
|
|
|
|
gEnableModulatedDTIM=2
|
|
gMaxLIModulatedDTIM=6
|
|
|
|
#############################################
|
|
# Roaming related configurations
|
|
#############################################
|
|
# CSR Roaming Enable(1) Disable(0)
|
|
gRoamingTime=0
|
|
|
|
# ESE Support and fast transition
|
|
EseEnabled=1
|
|
|
|
gNeighborLookupThreshold=76
|
|
gNeighborReassocThreshold=81
|
|
gNeighborScanTimerPeriod=200
|
|
gNeighborScanChannelMinTime=20
|
|
gNeighborScanChannelMaxTime=30
|
|
gMaxNeighborReqTries=3
|
|
|
|
# To enable, set gRoamIntraBand=1 (Roaming within band)
|
|
# To disable, set gRoamIntraBand=0 (Roaming across band)
|
|
gRoamIntraBand=0
|
|
|
|
# Legacy (non-ESE, non-802.11r) Fast Roaming Support
|
|
# To enable, set FastRoamEnabled=1
|
|
# To disable, set FastRoamEnabled=0
|
|
FastRoamEnabled=1
|
|
|
|
#Check if the AP to which we are roaming is better than current AP in terms of RSSI.
|
|
#Checking is disabled if set to Zero.Otherwise it will use this value as to how better
|
|
#the RSSI of the new/roamable AP should be for roaming
|
|
RoamRssiDiff=3
|
|
|
|
# If the RSSI of any available candidate is better than currently associated
|
|
# AP by at least gImmediateRoamRssiDiff, then being to roam immediately (without
|
|
# registering for reassoc threshold).
|
|
# NOTE: Value of 0 means that we would register for reassoc threshold.
|
|
gImmediateRoamRssiDiff=10
|
|
|
|
# 802.11K support
|
|
gRrmEnable=1
|
|
gRrmOperChanMax=8
|
|
gRrmNonOperChanMax=8
|
|
|
|
gEnableFastRoamInConcurrency=1
|
|
|
|
# Enable/Disable Roaming Offload Support (a.k.a Key Management Offload)
|
|
# 0 to disable, 1 to enable
|
|
gRoamOffloadEnabled=1
|
|
|
|
gAllowDFSChannelRoam=1
|
|
|
|
disable_scoring_for_roam=0
|
|
#############################################
|
|
# Offload related configurations
|
|
#############################################
|
|
# Beacon filtering frequency (unit in beacon intervals)
|
|
gNthBeaconFilter=50
|
|
|
|
# Enable WAPI or not
|
|
# WAPIIsEnabled=0
|
|
# Flags to filter Mcast abd Bcast RX packets.
|
|
# Value 0: No filtering, 1: Filter all Multicast.
|
|
# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
|
|
McastBcastFilter=3
|
|
|
|
#Flag to enable HostARPOffload feature or not
|
|
hostArpOffload=1
|
|
|
|
#Flag to enable HostNSOffload feature or not
|
|
hostNSOffload=1
|
|
|
|
# controlling the following offload patterns
|
|
# through ini parameter. Default value is 1
|
|
# to disable set it to zero. ssdp = 0
|
|
# Setup multicast pattern for mDNS 224.0.0.251,
|
|
# SSDP 239.255.255.250 and LLMNR 224.0.0.252
|
|
ssdp = 0
|
|
|
|
#Enable MC address filtering offload
|
|
gMCAddrListEnable=1
|
|
|
|
#Enable Active mode offload
|
|
gActiveModeOffload=1
|
|
|
|
#Enable Active mode offload
|
|
gEnableActiveModeOffload=1
|
|
|
|
#Enable APF in Active mode
|
|
gActiveUcBpfMode=2
|
|
gActiveMcBcBpfMode=1
|
|
|
|
#HW CCE Filter mode
|
|
gHwFilterMode=0
|
|
|
|
# WOW Enable/Disable.
|
|
# 0 - Disable both magic pattern match and pattern byte match.
|
|
# 1 - Enable magic pattern match on all interfaces.
|
|
# 2 - Enable pattern byte match on all interfaces.
|
|
# 3 - Enable both magic patter and pattern byte match on all interfaces.
|
|
# Default value of gEnableWoW is 3.
|
|
# gEnableWoW=0
|
|
|
|
|
|
#############################################
|
|
# Logging related configurations
|
|
#############################################
|
|
gEnableLogp=1
|
|
|
|
gEnableSelfRecovery=1
|
|
|
|
#Enable firmware log
|
|
gEnablefwlog=1
|
|
# Additional firmware log levels
|
|
gFwDebugLogLevel=3
|
|
gFwDebugModuleLoglevel=2,1,3,1,5,1,9,1,13,1,14,1,18,1,19,1,26,1,28,1,29,1,31,1,36,1,38,1,46,1,47,1,50,1,52,1,53,1,56,1,60,1,61,1,4,1
|
|
|
|
#Enable firmware uart print
|
|
gEnablefwprint=0
|
|
|
|
#############################################
|
|
# TDLS related configurations
|
|
#############################################
|
|
# Enable support for TDLS
|
|
# 0 - disable
|
|
# 1 - enable
|
|
gEnableTDLSSupport=1
|
|
|
|
# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
|
|
# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
|
|
# and RSSI) is met and then will initiate teardown when teardown criteria
|
|
# (idle packet count and RSSI) is met.
|
|
# 0 - disable
|
|
# 1 - enable
|
|
gEnableTDLSImplicitTrigger=1
|
|
|
|
# Enable TDLS External Control. That is, user space application has to
|
|
# first configure a peer MAC in wlan driver towards which TDLS is desired.
|
|
# Device will establish TDLS only towards those configured peers whenever
|
|
# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
|
|
# when teardown criteria (idle packet count and RSSI) is met. However,
|
|
# device will accept TDLS connection if it is initiated from any other peer,
|
|
# even if that peer is not configured.
|
|
# 0 - disable
|
|
# 1 - enable
|
|
# For TDLS External Control, Implicit Trigger must also be enabled.
|
|
gTDLSExternalControl=1
|
|
|
|
# Enable support for TDLS off-channel operation
|
|
# 0 - disable
|
|
# 1 - enable
|
|
# TDLS off-channel operation will be invoked when there is only one
|
|
# TDLS connection.
|
|
gEnableTDLSOffChannel=1
|
|
|
|
gEnableTDLSScan=1
|
|
gTDLSTxPacketThreshold=10
|
|
gTDLSIdlePacketThreshold=1
|
|
|
|
#############################################
|
|
# P2P related configurations
|
|
#############################################
|
|
#P2P Listen offload
|
|
gEnableP2pListenOffload=1
|
|
|
|
#Enable or Disable p2p device address administered
|
|
isP2pDeviceAddrAdministrated=0
|
|
|
|
#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
|
|
#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link is idle for last 10 seconds.)
|
|
#For both active and power save clients.
|
|
|
|
#Power save clients: DUT set TIM bit from 10th second onwards and till client honors TIM bit.
|
|
#If doesn't honor for 5 seconds then DUT remove client.
|
|
|
|
#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not success still we try on
|
|
#11th second if not tries on 12th and so on till 15th second. Hence before disconnection DUT will send 5 NULL frames.
|
|
#Hence in any case DUT will detect client got removed in (10+5) seconds. i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
|
|
|
|
#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and it is period
|
|
#where we send NULL frame.
|
|
|
|
#gApLinkMonitorPeriod = 10
|
|
#gGoLinkMonitorPeriod = 10
|
|
|
|
#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame are succeed to send or not.
|
|
#Hence total effective detection time is gGoLinkMonitorPeriod+ gGoKeepAlivePeriod/gApLinkMonitorPeriod+ gApKeepAlivePeriod.
|
|
gGoKeepAlivePeriod = 20
|
|
gApKeepAlivePeriod = 20
|
|
|
|
gGoForce11NFor11AC=1
|
|
|
|
#############################################
|
|
# SAP related configurations
|
|
#############################################
|
|
#Enable OBSS protection
|
|
gEnableApOBSSProt=1
|
|
|
|
#Enable/Disable UAPSD for SoftAP
|
|
gEnableApUapsd=1
|
|
|
|
# SAP auto channel selection configuration
|
|
# 0 = disable auto channel selection
|
|
# 1 = enable auto channel selection, channel provided by supplicant will be ignored
|
|
gApAutoChannelSelection=0
|
|
|
|
#SOFTAP Channel Range selection
|
|
gAPChannelSelectStartChannel=1
|
|
gAPChannelSelectEndChannel=11
|
|
|
|
# SAP Country code
|
|
# Default Country Code is 2 bytes, 3rd byte is optional indoor or out door.
|
|
# Example
|
|
# US Indoor, USI
|
|
# Korea Outdoor, KRO
|
|
# Japan without optional byte, JP
|
|
# France without optional byte, FR
|
|
#gAPCntryCode=USI
|
|
|
|
# DFS Master Capability
|
|
gEnableDFSMasterCap=1
|
|
|
|
# Disable 11AC for hotspot
|
|
gSapForce11NFor11AC=1
|
|
|
|
#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled
|
|
gAPAutoShutOff=0
|
|
|
|
# Remove Overlap channel restriction
|
|
gEnableOverLapCh=0
|
|
|
|
# Enable/Disable channel avoidance for SAP in SCC scenario
|
|
# 0 - disable
|
|
# 1 - enable
|
|
gSapSccChanAvoidance=0
|
|
|
|
#Enable/Disable Tx beamformee in SAP mode
|
|
gEnableTxBFeeSAP=1
|
|
|
|
|
|
|
|
#Enable/Disable dual MAC feature
|
|
# 0 - enable DBS
|
|
# 1 - disable DBS
|
|
# 2 - disable DBS for connection but keep DBS for scan
|
|
# 3 - disable DBS for connection but keep DBS scan with async
|
|
# scan policy disabled
|
|
# 4 - enable DBS for connection as well as for scan with async
|
|
# scan policy disabled
|
|
gDualMacFeatureDisable=1
|
|
|
|
#Set priority for connection with bssid_hint
|
|
g_is_bssid_hint_priority=0
|
|
|
|
gdbs_scan_selection=5,4,1,16,4,1
|
|
|
|
enable_11d_in_world_mode=1
|
|
|
|
gEnableLPRx=0
|
|
|
|
END
|
|
|
|
# Note: Configuration parser would not read anything past the END marker
|