device_motorola_rtwo/sensors/Sensor.cpp

/*
 * Copyright (C) 2019 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "Sensor.h"

#include <hardware/sensors.h>
#include <log/log.h>
#include <utils/SystemClock.h>

#include <chrono>
#include <cmath>
#include <linux/input.h>

static bool readEvent(int fd, struct input_event *event) {
    int rc;

    rc = read(fd, event, sizeof(struct input_event));
    if (rc != sizeof(struct input_event)) {
        ALOGE("failed to read event from fd, err: %d", rc);
        return false;
    }

    return true;
}

static bool readBool(int fd, bool seek) {
    char c;
    int rc;

    if (seek) {
        rc = lseek(fd, 0, SEEK_SET);
        if (rc) {
            ALOGE("failed to seek: %d", rc);
            return false;
        }
    }

    rc = read(fd, &c, sizeof(c));
    if (rc != 1) {
        ALOGE("failed to read bool: %d", rc);
        return false;
    }

    return c != '0';
}

namespace android {
namespace hardware {
namespace sensors {
namespace V2_1 {
namespace subhal {
namespace implementation {

using ::android::hardware::sensors::V1_0::MetaDataEventType;
using ::android::hardware::sensors::V1_0::OperationMode;
using ::android::hardware::sensors::V1_0::Result;
using ::android::hardware::sensors::V1_0::SensorFlagBits;
using ::android::hardware::sensors::V1_0::SensorStatus;
using ::android::hardware::sensors::V2_1::Event;
using ::android::hardware::sensors::V2_1::SensorInfo;
using ::android::hardware::sensors::V2_1::SensorType;

Sensor::Sensor(int32_t sensorHandle, ISensorsEventCallback* callback)
    : mIsEnabled(false),
      mSamplingPeriodNs(0),
      mLastSampleTimeNs(0),
      mCallback(callback),
      mMode(OperationMode::NORMAL) {
    mSensorInfo.sensorHandle = sensorHandle;
    mSensorInfo.vendor = "The LineageOS Project";
    mSensorInfo.version = 1;
    constexpr float kDefaultMaxDelayUs = 1000 * 1000;
    mSensorInfo.maxDelay = kDefaultMaxDelayUs;
    mSensorInfo.fifoReservedEventCount = 0;
    mSensorInfo.fifoMaxEventCount = 0;
    mSensorInfo.requiredPermission = "";
    mSensorInfo.flags = 0;
    mRunThread = std::thread(startThread, this);
}

Sensor::~Sensor() {
    // Ensure that lock is unlocked before calling mRunThread.join() or a
    // deadlock will occur.
    {
        std::unique_lock<std::mutex> lock(mRunMutex);
        mStopThread = true;
        mIsEnabled = false;
        mWaitCV.notify_all();
    }
    mRunThread.join();
}

const SensorInfo& Sensor::getSensorInfo() const {
    return mSensorInfo;
}

void Sensor::batch(int32_t samplingPeriodNs) {
    samplingPeriodNs =
        std::clamp(samplingPeriodNs, mSensorInfo.minDelay * 1000, mSensorInfo.maxDelay * 1000);

    if (mSamplingPeriodNs != samplingPeriodNs) {
        mSamplingPeriodNs = samplingPeriodNs;
        // Wake up the 'run' thread to check if a new event should be generated now
        mWaitCV.notify_all();
    }
}

void Sensor::activate(bool enable) {
    std::lock_guard<std::mutex> lock(mRunMutex);
    if (mIsEnabled != enable) {
        mIsEnabled = enable;
        mWaitCV.notify_all();
    }
}

Result Sensor::flush() {
    // Only generate a flush complete event if the sensor is enabled and if the sensor is not a
    // one-shot sensor.
    if (!mIsEnabled) {
        return Result::BAD_VALUE;
    }

    // Note: If a sensor supports batching, write all of the currently batched events for the sensor
    // to the Event FMQ prior to writing the flush complete event.
    Event ev;
    ev.sensorHandle = mSensorInfo.sensorHandle;
    ev.sensorType = SensorType::META_DATA;
    ev.u.meta.what = MetaDataEventType::META_DATA_FLUSH_COMPLETE;
    std::vector<Event> evs{ev};
    mCallback->postEvents(evs, isWakeUpSensor());

    return Result::OK;
}

void Sensor::startThread(Sensor* sensor) {
    sensor->run();
}

void Sensor::run() {
    std::unique_lock<std::mutex> runLock(mRunMutex);
    constexpr int64_t kNanosecondsInSeconds = 1000 * 1000 * 1000;

    while (!mStopThread) {
        if (!mIsEnabled || mMode == OperationMode::DATA_INJECTION) {
            mWaitCV.wait(runLock, [&] {
                return ((mIsEnabled && mMode == OperationMode::NORMAL) || mStopThread);
            });
        } else {
            timespec curTime;
            clock_gettime(CLOCK_REALTIME, &curTime);
            int64_t now = (curTime.tv_sec * kNanosecondsInSeconds) + curTime.tv_nsec;
            int64_t nextSampleTime = mLastSampleTimeNs + mSamplingPeriodNs;

            if (now >= nextSampleTime) {
                mLastSampleTimeNs = now;
                nextSampleTime = mLastSampleTimeNs + mSamplingPeriodNs;
                mCallback->postEvents(readEvents(), isWakeUpSensor());
            }

            mWaitCV.wait_for(runLock, std::chrono::nanoseconds(nextSampleTime - now));
        }
    }
}

bool Sensor::isWakeUpSensor() {
    return mSensorInfo.flags & static_cast<uint32_t>(SensorFlagBits::WAKE_UP);
}

std::vector<Event> Sensor::readEvents() {
    std::vector<Event> events;
    Event event;
    event.sensorHandle = mSensorInfo.sensorHandle;
    event.sensorType = mSensorInfo.type;
    event.timestamp = ::android::elapsedRealtimeNano();
    event.u.vec3.x = 0;
    event.u.vec3.y = 0;
    event.u.vec3.z = 0;
    event.u.vec3.status = SensorStatus::ACCURACY_HIGH;
    events.push_back(event);
    return events;
}

void Sensor::setOperationMode(OperationMode mode) {
    std::lock_guard<std::mutex> lock(mRunMutex);
    if (mMode != mode) {
        mMode = mode;
        mWaitCV.notify_all();
    }
}

bool Sensor::supportsDataInjection() const {
    return mSensorInfo.flags & static_cast<uint32_t>(SensorFlagBits::DATA_INJECTION);
}

Result Sensor::injectEvent(const Event& event) {
    Result result = Result::OK;
    if (event.sensorType == SensorType::ADDITIONAL_INFO) {
        // When in OperationMode::NORMAL, SensorType::ADDITIONAL_INFO is used to push operation
        // environment data into the device.
    } else if (!supportsDataInjection()) {
        result = Result::INVALID_OPERATION;
    } else if (mMode == OperationMode::DATA_INJECTION) {
        mCallback->postEvents(std::vector<Event>{event}, isWakeUpSensor());
    } else {
        result = Result::BAD_VALUE;
    }
    return result;
}

OneShotSensor::OneShotSensor(int32_t sensorHandle, ISensorsEventCallback* callback)
    : Sensor(sensorHandle, callback) {
    mSensorInfo.minDelay = -1;
    mSensorInfo.maxDelay = 0;
    mSensorInfo.flags |= SensorFlagBits::ONE_SHOT_MODE;
}

#define INPUT_DT2W_SENSOR_PATH "/dev/input/event10"
#define INPUT_TOUCHSCREEN_PATH "/dev/input/event11"

#define GESTURE_PATH "/sys/class/touchscreen/primary/gesture"

InputEventDT2WSensor::InputEventDT2WSensor(
    int32_t sensorHandle, ISensorsEventCallback* callback)
    : OneShotSensor(sensorHandle, callback) {
    mSensorInfo.name = "DT2W sensor";
    mSensorInfo.type = static_cast<SensorType>(static_cast<int32_t>(SensorType::DEVICE_PRIVATE_BASE) + 1);
    mSensorInfo.typeAsString = "org.lineageos.sensor.dt2w";
    mSensorInfo.maxRange = 2048.0f;
    mSensorInfo.resolution = 1.0f;
    mSensorInfo.power = 0;
    mSensorInfo.flags |= SensorFlagBits::WAKE_UP;

    std::ofstream mGestureEnable;
    mGestureEnable.open(GESTURE_PATH);

    if(!mGestureEnable) {
        ALOGE("could not open gesture path");
        mStopThread = true;
        return;
    }

    mGestureEnable << "49" << std::flush;

    int rc;

    rc = pipe(mWaitPipeFd);
    if (rc < 0) {
        mWaitPipeFd[0] = -1;
        mWaitPipeFd[1] = -1;
        ALOGE("failed to open wait pipe: %d", rc);
    }

    mPollFds[0] = open(INPUT_DT2W_SENSOR_PATH, O_RDONLY | O_NONBLOCK);
    if (mPollFds[0] < 0) {
        ALOGE("failed to open poll fd: %d", mPollFds[0]);
    }

    if (mWaitPipeFd[0] < 0 || mWaitPipeFd[1] < 0 || mPollFds[0] < 0) {
        mStopThread = true;
        return;
    }

    mPolls[0] = {
        .fd = mWaitPipeFd[0],
        .events = POLLIN,
    };

    mPolls[1] = {
        .fd = mPollFds[0],
        .events = POLLIN,
    };
}

InputEventDT2WSensor::~InputEventDT2WSensor() {
    interruptPoll();
}

void InputEventDT2WSensor::activate(bool enable) {
    std::lock_guard<std::mutex> lock(mRunMutex);

    if (mIsEnabled != enable) {
        mIsEnabled = enable;
        interruptPoll();
        mWaitCV.notify_all();
    }
}

void InputEventDT2WSensor::setOperationMode(OperationMode mode) {
    Sensor::setOperationMode(mode);
    interruptPoll();
}

void InputEventDT2WSensor::run() {
    std::unique_lock<std::mutex> runLock(mRunMutex);

    while (!mStopThread) {
        if (!mIsEnabled || mMode == OperationMode::DATA_INJECTION) {
            mWaitCV.wait(runLock, [&] {
                return ((mIsEnabled && mMode == OperationMode::NORMAL) || mStopThread);
            });
        } else {
            // Cannot hold lock while polling.
            runLock.unlock();
            int rc = poll(mPolls, 2, -1);
            runLock.lock();

            struct input_event event;

            if (rc < 0) {
                ALOGE("failed to poll: %d", rc);
                mStopThread = true;
                continue;
            }

            if((mPolls[1].revents == mPolls[1].events) && readEvent(mPolls[1].fd, &event)) {
                if(event.type == EV_KEY && event.value == 1 && event.code == KEY_F4) {
                    mIsEnabled = false;
                    mCallback->postEvents(readEvents(), isWakeUpSensor());
                }
            } else if (mPolls[0].revents == mPolls[0].events) {
                readBool(mWaitPipeFd[0], false /* seek */);
            }
        }
    }
}

void InputEventDT2WSensor::interruptPoll() {
    if (mWaitPipeFd[1] < 0) return;

    char c = '1';
    write(mWaitPipeFd[1], &c, sizeof(c));
}

std::vector<Event> InputEventDT2WSensor::readEvents() {
    std::vector<Event> events;
    Event event;
    event.sensorHandle = mSensorInfo.sensorHandle;
    event.sensorType = mSensorInfo.type;
    event.timestamp = ::android::elapsedRealtimeNano();
    event.u.data[0] = 0;
    event.u.data[1] = 0;
    events.push_back(event);
    return events;
}

}  // namespace implementation
}  // namespace subhal
}  // namespace V2_1
}  // namespace sensors
}  // namespace hardware
}  // namespace android