# MTK project .rc configure
import init.mi_thermald.rc

on init
    mkdir /mnt/media_rw/usbotg 0700 media_rw media_rw
    mkdir /storage/usbotg 0700 root root

on post-fs-data
	mkdir /data/vendor/thermal 0771 root system
    mkdir /data/vendor/thermal/config 0771 root system
    #thermal
    chown system system /sys/class/thermal/thermal_message/sconfig
#Camera
    chmod 0660 /dev/MAINAF
    chown system camera /dev/MAINAF

    chmod 0660 /dev/MAINAF2
    chown system camera /dev/MAINAF2

    chmod 0660 /dev/SUBAF
    chown system camera /dev/SUBAF

    chmod 0660 /dev/GAF001AF
    chown system camera /dev/GAF001AF

    chmod 0660 /dev/DW9714AF
    chown system camera /dev/DW9714AF

    chmod 0660 /dev/LC898212AF
    chown system camera /dev/LC898212AF

    chmod 0660 /dev/BU64745GWZAF
    chown system camera /dev/BU64745GWZAF

#XIAOMI_DUAL_CAM_BIN
    mkdir /mnt/vendor/persist/camera/ 0777 system camera
    mkdir /data/vendor/camera/ 0777 system camera
# for intsense bokeh use
    mkdir /data/vendor/camera/model 0777 system camera
    mkdir /data/vendor/camera/model/dof_model 0777 system camera
    mkdir /data/vendor/camera/model/rt_model 0777 system camera
 
    copy /vendor/etc/camera/model/dof_model/capture_cache /data/vendor/camera/model/dof_model/capture_cache
    copy /vendor/etc/camera/model/dof_model/capture_model /data/vendor/camera/model/dof_model/capture_model
    copy /vendor/etc/camera/model/dof_model/capture_policy /data/vendor/camera/model/dof_model/capture_policy
    copy /vendor/etc/camera/model/rt_model/preview_cache /data/vendor/camera/model/rt_model/preview_cache
    copy /vendor/etc/camera/model/rt_model/preview_model /data/vendor/camera/model/rt_model/preview_model
    copy /vendor/etc/camera/model/rt_model/preview_policy /data/vendor/camera/model/rt_model/preview_policy

    chmod 0666 /data/vendor/camera/model/dof_model/capture_cache
    chmod 0666 /data/vendor/camera/model/dof_model/capture_model
    chmod 0666 /data/vendor/camera/model/dof_model/capture_policy
    chmod 0666 /data/vendor/camera/model/rt_model/preview_cache
    chmod 0666 /data/vendor/camera/model/rt_model/preview_model
    chmod 0666 /data/vendor/camera/model/rt_model/preview_policy

    chown system system /sys/class/touch/touch_dev/palm_sensor

# for mibokeh use
    mkdir /data/vendor/camera/mibokeh 0776 system camera

#SMB
    chown system system /proc/smb/ScreenComm
    chmod 0660 /proc/smb/ScreenComm

    chmod 0660 /dev/spm
    chown system system /dev/spm

#charge permission control
    chmod 0777 /sys/class/power_supply/battery/charging_enabled
    chown system system /sys/class/power_supply/battery/charging_enabled

on init
    # Refer to http://source.android.com/devices/tech/storage/index.html
    # It said, "Starting in Android 4.4, multiple external storage devices are surfaced to developers through
    #           Context.getExternalFilesDirs(), Context.getExternalCacheDirs(), and Context.getObbDirs().
    #           External storage devices surfaced through these APIs must be a semi-permanent part of the device (such as an SD card slot in a battery compartment).
    #           Developers expect data stored in these locations to be available over long periods of time."
    # Therefore, if the target doesn't support sd hot-plugging (Ex: the SD card slot in a battery compartment), we need to export SECONDARY_STORAGE in 'boot' section
    #
    # export SECONDARY_STORAGE /storage/sdcard1

#add thermal tactics
on  property:vendor.camera.boost.en=1
    write /sys/class/thermal/thermal_message/sconfig 12
on  property:vendor.camera.boost.en=0
    write /sys/class/thermal/thermal_message/sconfig 17

# 20220922 ODM-RT yingjun add RPMB and cpuid for selinux
on property:sys.boot_completed=1 && property:vendor.sys.rpmb_state=*
    setprop ro.vendor.ril.oem.rpmb_state ${vendor.sys.rpmb_state}

on property:sys.boot_completed=1 && property:ro.boot.cpuid=*
    setprop ro.vendor.ril.oem.cpuid ${ro.boot.cpuid}

service fuse_usbotg /system/bin/sdcard -u 1023 -g 1023 -w 1023 -d /mnt/media_rw/usbotg /storage/usbotg
    class late_start
    disabled

# TouchPad settings
on property:sys.tp.grip_enable=0
    write /proc/tp_grip_area 0

on property:sys.tp.grip_enable=1
    write /proc/tp_grip_area 1

on property:sys.tp.grip_enable=90
    write /proc/tp_grip_area 90

on property:sys.tp.grip_enable=180
    write /proc/tp_grip_area 180

on property:sys.tp.grip_enable=270
    write /proc/tp_grip_area 270