diff --git a/manifest.xml b/manifest.xml
index dfe888f..9f1c490 100644
--- a/manifest.xml
+++ b/manifest.xml
@@ -80,7 +80,7 @@
android.hardware.nfc
hwbinder
- @1.1::INfc/default
+ @1.2::INfc/default
android.hardware.power
@@ -172,9 +172,9 @@
@2.0::IPictureAdjustment/default
- vendor.nxp.hardware.nfc
+ vendor.nxp.nxpnfc
hwbinder
- @1.0::INqNfc/default
+ @1.0::INxpNfc/default
vendor.qti.data.factory
diff --git a/nfc/libnfc-nxp.conf b/nfc/libnfc-nxp.conf
new file mode 100644
index 0000000..efd7cb3
--- /dev/null
+++ b/nfc/libnfc-nxp.conf
@@ -0,0 +1,508 @@
+#============================================================================
+# File Name: libnfc-nxp.conf
+#
+# Description:
+# NFC configuration management file
+#
+# Modification History:
+# Revision 1.0 2017/01/04 20:50:20 xiaohua.wang@xiaomi.com
+# Initial draft version for Xiaomi C1 P2 board
+#
+# Revision 1.1 2017/03/01 16:32:09 xiaohua.wang@xiaomi.com
+# Upgrade NFCC firmware version to 11.1.E
+#
+# Revision 1.2 2017/06/30 23:45:41 xiaohua.wang@xiaomi.com
+# Improved notification management of received NCI Mode Set
+#
+# Revision 1.3 firmware version to 11.1.13/14
+# Kevin.hu@nxp.com 2017/09/05 16:06:41
+#=============================================================================
+
+# FW_VERSION=ALMSL 11.1.13/14
+# DEVICE_MANUFACTURER=Xiaomi
+# DEVICE_MODEL=E1
+
+# This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn5x)
+# and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn5x)
+
+###############################################################################
+# Application options
+# Logging Levels
+# NXPLOG_DEFAULT_LOGLEVEL 0x01
+# ANDROID_LOG_DEBUG 0x03
+# ANDROID_LOG_WARN 0x02
+# ANDROID_LOG_ERROR 0x01
+# ANDROID_LOG_SILENT 0x00
+#
+NXPLOG_EXTNS_LOGLEVEL=0x03
+NXPLOG_NCIHAL_LOGLEVEL=0x03
+NXPLOG_NCIX_LOGLEVEL=0x03
+NXPLOG_NCIR_LOGLEVEL=0x03
+NXPLOG_FWDNLD_LOGLEVEL=0x03
+NXPLOG_TML_LOGLEVEL=0x03
+
+###############################################################################
+# Nfc Device Node name
+NXP_NFC_DEV_NODE="/dev/nq-nci"
+
+###############################################################################
+# Extension for Mifare reader enable
+MIFARE_READER_ENABLE=0x01
+
+###############################################################################
+# Vzw Feature enable
+VZW_FEATURE_ENABLE=0x01
+
+###############################################################################
+# File name for Firmware
+NXP_FW_NAME="libpn553_fw.so"
+
+###############################################################################
+# System clock source selection configuration
+#define CLK_SRC_XTAL 1
+#define CLK_SRC_PLL 2
+
+NXP_SYS_CLK_SRC_SEL=0x02
+
+###############################################################################
+# System clock frequency selection configuration
+# define CLK_FREQ_13MHZ 1
+# define CLK_FREQ_19_2MHZ 2
+# define CLK_FREQ_24MHZ 3
+# define CLK_FREQ_26MHZ 4
+# define CLK_FREQ_38_4MHZ 5
+# define CLK_FREQ_52MHZ 6
+
+NXP_SYS_CLK_FREQ_SEL=0x02
+
+###############################################################################
+# The timeout value to be used for clock request acknowledgment
+# min value = 0x01 to max = 0x06
+
+NXP_SYS_CLOCK_TO_CFG=0x06
+
+###############################################################################
+# NXP proprietary settings
+NXP_ACT_PROP_EXTN={2F, 02, 00}
+
+###############################################################################
+# NFC forum profile settings
+NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00}
+
+###############################################################################
+# NFCC Configuration Control
+# Allow NFCC to manage RF Config 0x01
+# Don't allow NFCC to manage RF Config 0x00
+NXP_NFC_MERGE_RF_PARAMS={20, 02, 04, 01, 85, 01, 01}
+
+###############################################################################
+# Standby enable settings
+NXP_CORE_STANDBY={2F, 00, 01, 01}
+
+###############################################################################
+# NXP TVDD configurations settings
+# Allow NFCC to configure External TVDD, There are currently three
+# configurations (1, 2 and 3) are supported, out of them only one can be
+#supported.
+
+NXP_EXT_TVDD_CFG=0x02
+
+# config1:SLALM, 3.3V for both RM and CM
+NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C}
+
+#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM,
+# monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms
+NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, BA, 1E, 15, 00, D0, 0C}
+
+#config3: use DCDC in CE, use Tx_Pwr_Req, SLALM, monitoring 5V from DCDC,
+# DCDCWaitTime=4.2ms
+NXP_EXT_TVDD_CFG_3={20, 02, 0B, 02, A0, 66, 01, 01, A0, 0E, 03, 52, 40, 0A}
+
+NXP_RF_CONF_BLK_1={
+ 20, 02, E7, 1B,
+ A0, 0D, 06, 06, 37, 08, 76, 00, 00,
+ A0, 0D, 03, 24, 03, 7D,
+ A0, 0D, 06, 02, 35, 00, 3E, 00, 00,
+ A0, 0D, 06, 04, 35, F4, 05, 70, 02,
+ A0, 0D, 06, C2, 35, 00, 3E, 00, 03,
+ A0, 0D, 06, 04, 42, F8, 40, FF, FF,
+ A0, 0D, 04, 32, 42, F8, 40,
+ A0, 0D, 04, 46, 42, 68, 40,
+ A0, 0D, 04, 56, 42, 78, 40,
+ A0, 0D, 04, 5C, 42, 80, 40,
+ A0, 0D, 04, CA, 42, 68, 40,
+ A0, 0D, 06, 06, 42, 00, 02, F6, F6,
+ A0, 0D, 06, 32, 4A, 53, 07, 00, 1B,
+ A0, 0D, 06, 46, 4A, 33, 07, 00, 07,
+ A0, 0D, 06, 56, 4A, 43, 07, 00, 07,
+ A0, 0D, 06, 5C, 4A, 11, 07, 01, 07,
+ A0, 0D, 06, 34, 44, 66, 08, 00, 00,
+ A0, 0D, 06, 48, 44, 65, 0A, 00, 00,
+ A0, 0D, 06, 58, 44, 55, 08, 00, 00,
+ A0, 0D, 06, 5E, 44, 55, 08, 00, 00,
+ A0, 0D, 06, CA, 44, 65, 0A, 00, 00,
+ A0, 0D, 06, 06, 44, 04, 04, C4, 00,
+ A0, 0D, 06, 34, 2D, DC, 20, 04, 00,
+ A0, 0D, 06, 48, 2D, 15, 34, 1F, 01,
+ A0, 0D, 06, 58, 2D, 0D, 48, 0C, 01,
+ A0, 0D, 06, 5E, 2D, 0D, 5A, 0C, 01,
+ A0, 0D, 06, CA, 2D, 15, 34, 1F, 01
+}
+
+# Enable DLMA
+NXP_RF_CONF_BLK_2={
+ 20, 02, D6, 01, A0, 34, D2, 23, 04, 18, 47, 40, 00, 00, 40, 01, 32, 00, 40, 01, 47, 00, 40, 01, 73, 00, 40, 01, A7, 00, 40, 01, F5, 00, 08, 01, 5C, 01, 48, 00, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 48, 01, 00, 00, 08, 03, 00, 00, 08, 01, 00, 00, C8, 02, 00, 00, C8, 00, 00, 00, 88, 02, 00, 00, 48, 02, 00, 00, B8, 00, 00, 00, 68, 00, 00, 00, 18, 00, 00, 00, 08, 02, 00, 00, 00, 00, 00, 00, 00, 00, 47, 00, 00, 40, 01, 32, 00, 40, 01, 47, 00, 40, 01, 73, 00, 40, 01, A7, 00, 40, 01, F5, 00, 08, 01, 5C, 01, 48, 00, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 48, 01, 00, 00, 08, 03, 00, 00, 08, 01, 00, 00, C8, 02, 00, 00, C8, 00, 00, 00, 88, 02, 00, 00, 48, 02, 00, 00, B8, 00, 00, 00, 68, 00, 00, 00, 18, 00, 00, 00, 08, 02, 00, 00, 00, 00
+}
+
+# Disable DPC
+NXP_RF_CONF_BLK_3={
+ 20, 02, 5B, 01, A0, 0B, 57, 11, 11, 90, 78, 0F, 4E, 00, 3D, 95, 00, 00, 3D, 9F, 00, 00, 50, 9F, 00, 00, 59, 9F, 00, 00, 5A, 9F, 00, 00, 64, 9F, 00, 00, 65, 9F, 00, 00, 6E, 9F, 00, 00, 72, 9F, 00, 00, 79, 9F, 00, 00, 7B, 9F, 00, 00, 84, 9F, 00, 00, 86, 9F, 00, 00, 8F, 9F, 00, 00, 91, 9F, 00, 00, 9A, 9F, 00, 00, A1, 9F, 00, 00, A7, 9F, 00, 00, B0, 1F, 00, 00, B9, 1F, 00, 00
+}
+
+# CE detector/phase
+NXP_RF_CONF_BLK_4={
+ 20, 02, 21, 04,
+ A0, 38, 04, 08, 08, 08, 00,
+ A0, 3A, 08, E1, 00, E1, 00, E1, 00, E1, 00,
+ A0, 0D, 06, 06, 16, 0E, 00, 1F, 00,
+ A0, B1, 02, A8, 02
+}
+###############################################################################
+# Set configuration optimization decision setting
+# Enable = 0x01
+# Disable = 0x00
+NXP_SET_CONFIG_ALWAYS=0x01
+
+###############################################################################
+# Set configuration optimization decision setting
+# Enable = 0x01
+# Disable = 0x00
+NXP_RF_UPDATE_REQ=0x01
+
+###############################################################################
+# Core configuration extensions
+# A009 - Time-out before standby
+# A0EC - Disable/Enable SWP1 interface
+# A0ED - Disable/Enable SWP2 interface
+# A05E - Send RID automatically in Jewel Reader mode
+# A012 - NFCEE interface 2 configuration
+# A040 - Low Power Card Detector Enable
+# A041 - Low Power Card Detector Threshold
+# A042 - Low Power Card Detector Sampling
+# A043 - Low Power Card Detector Hybrid
+# A0D5 - SWP/DWP desired baudrate
+# A0D8 - Configure the number of Sliding Windows used on DWP
+# A0DD - Retry on SWP2 interface
+# A0F2 - SVDD_PWR_REQ enable
+# A09F - Add ON/OFF guard time for SVDD power management(Step value ~1mSec)
+# A096 - Notify all AIDs
+# A037 - SE DWP system configuration
+NXP_CORE_CONF_EXTN={20, 02, 6B, 14,
+ A0, 09, 02, 90, 01,
+ A0, EC, 01, 01,
+ A0, ED, 01, 03,
+ A0, 5E, 01, 01,
+ A0, 12, 01, 02,
+ A0, 40, 01, 01,
+ A0, 41, 01, 05,
+ A0, 43, 01, 04,
+ A0, 46, 02, BA, 27,
+ A0, 47, 02, BA, 27,
+ A0, 81, 01, 01,
+ A0, D5, 01, 0A,
+ A0, D8, 01, 02,
+ A0, DD, 01, 2D,
+ A0, F2, 01, 01,
+ A0, 9F, 02, 08, 08,
+ A0, 96, 01, 01,
+ A0, 37, 01, 35,
+ A0, 3F, 01, 01,
+ A0, 29, 17, 1A, 07, 00, 1D, 00, 02, 00, 1D, 00, 02, 00, 40, F6, F6, 00, 43, F6, F6, 38, 70, 00, 00, 00
+ }
+###############################################################################
+# Core configuration rf field filter settings to enable set to 01 to disable set to 00 last bit
+# NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 01}
+# NXP_CORE_RF_FIELD={ 2F, 32, 01, 01}
+###############################################################################
+# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set to 0x00
+NXP_I2C_FRAGMENTATION_ENABLED=0x00
+
+###############################################################################
+# Core configuration settings
+NXP_CORE_CONF={ 20, 02, 2E, 0E,
+ 28, 01, 00,
+ 21, 01, 00,
+ 30, 01, 08,
+ 31, 01, 03,
+ 32, 01, 60,
+ 38, 01, 01,
+ 33, 04, 01, 02, 03, 04,
+ 54, 01, 06,
+ 50, 01, 02,
+ 5B, 01, 00,
+ 80, 01, 01,
+ 81, 01, 01,
+ 82, 01, 0E,
+ 18, 01, 01
+ }
+
+###############################################################################
+# Mifare Classic Key settings
+# NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5,
+# A0, 52, 06, D3, F7, D3, F7, D3, F7,
+# A0, 53, 06, FF, FF, FF, FF, FF, FF,
+# A0, 54, 06, 00, 00, 00, 00, 00, 00}
+
+###############################################################################
+# Default SE Options
+# No secure element 0x00
+# eSE 0x01
+# UICC 0x02
+# UICC2 0x04
+NXP_DEFAULT_SE=0x01
+
+###############################################################################
+# Enable SWP full power mode when phone is power off
+NXP_SWP_FULL_PWR_ON=0x00
+
+###############################################################################
+#### Select the CHIP ####
+# PN547C2 0x01
+# PN65T 0x02
+# PN548AD 0x03
+# PN66T 0x04
+# PN551 0x05
+# PN67T 0x06
+# PN553 0x07
+# PN80T 0x08
+NXP_NFC_CHIP=0x08
+
+###############################################################################
+# CE when Screen state is locked
+# Disable 0x00
+# Enable 0x01
+NXP_CE_ROUTE_STRICT_DISABLE=0x01
+
+# Timeout in secs to get NFCEE Discover notification
+NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20
+
+NXP_DEFAULT_NFCEE_TIMEOUT=0x06
+
+# Timeout in secs
+NXP_SWP_RD_START_TIMEOUT=0x0A
+
+# Timeout in secs
+NXP_SWP_RD_TAG_OP_TIMEOUT=0x01
+
+###############################################################################
+
+# Set the default AID route Location :
+# This settings will be used when application does not set this parameter
+# host 0x00
+# eSE 0x01
+# UICC 0x02
+# UICC2 0x04
+DEFAULT_AID_ROUTE=0x01
+
+###############################################################################
+# Set the Mifare Desfire route Location :
+# This settings will be used when application does not set this parameter
+# host 0x00
+# eSE 0x01
+# UICC 0x02
+# UICC2 0x04
+DEFAULT_DESFIRE_ROUTE=0x01
+
+###############################################################################
+# Set the Mifare CLT route Location :
+# This settings will be used when application does not set this parameter
+# host 0x00
+# eSE 0x01
+# UICC 0x02
+# UICC2 0x04
+DEFAULT_MIFARE_CLT_ROUTE=0x01
+
+###############################################################################
+# Set the Felica CLT route Location :
+# This settings will be used when application does not set this parameter
+# eSE 0x01
+# UICC 0x02
+# UICC2 0x04
+DEFAULT_FELICA_CLT_ROUTE=0x01
+
+###############################################################################
+# Set the default AID Power state :
+# This settings will be used when application does not set this parameter
+# bit pos 0 = Switch On
+# bit pos 1 = Switch Off
+# bit pos 2 = Battery Off
+# bit pos 3 = Screen Lock
+# bit pos 4 = Screen Off
+DEFAULT_AID_PWR_STATE=0x19
+
+###############################################################################
+# Set the Mifare Desfire Power state :
+# This settings will be used when application does not set this parameter
+# bit pos 0 = Switch On
+# bit pos 1 = Switch Off
+# bit pos 2 = Battery Off
+# bit pos 3 = Screen Lock
+# bit pos 4 = Screen Off
+DEFAULT_DESFIRE_PWR_STATE=0x1B
+
+###############################################################################
+# Set the Mifare CLT Power state :
+# This settings will be used when application does not set this parameter
+# bit pos 0 = Switch On
+# bit pos 1 = Switch Off
+# bit pos 2 = Battery Off
+# bit pos 3 = Screen Lock
+# bit pos 4 = Screen Off
+DEFAULT_MIFARE_CLT_PWR_STATE=0x1B
+
+###############################################################################
+# Set the Felica CLT Power state :
+# This settings will be used when application does not set this parameter
+# bit pos 0 = Switch On
+# bit pos 1 = Switch Off
+# bit pos 2 = Battery Off
+# bit pos 3 = Screen Lock
+# bit pos 4 = Screen Off
+DEFAULT_FELICA_CLT_PWR_STATE=0x1B
+
+###############################################################################
+# AID Matching platform options
+# AID_MATCHING_L 0x01
+# AID_MATCHING_K 0x02
+AID_MATCHING_PLATFORM=0x01
+###############################################################################
+# P61 interface options
+# NFC 0x01
+# SPI 0x02
+NXP_P61_LS_DEFAULT_INTERFACE=0x01
+###############################################################################
+# P61 LTSM interface options
+# NFC 0x01
+# SPI 0x02
+NXP_P61_LTSM_DEFAULT_INTERFACE=0x01
+###############################################################################
+# CHINA_TIANJIN_RF_SETTING
+# Enable 0x01
+# Disable 0x00
+NXP_CHINA_TIANJIN_RF_ENABLED=0x01
+###############################################################################
+# SWP_SWITCH_TIMEOUT_SETTING
+# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60].
+# Timeout in milliseconds, for example
+# No Timeout 0x00
+# 10 millisecond timeout 0x0A
+NXP_SWP_SWITCH_TIMEOUT=0x0A
+###############################################################################
+# P61 interface options for JCOP Download
+# NFC 0x01
+# SPI 0x02
+NXP_P61_JCOP_DEFAULT_INTERFACE=0x01
+###############################################################################
+# P61 JCOP OS download options
+# FRAMEWORK API BY APPLICATION 0x00
+# AT BOOT_TIME 0x01
+NXP_JCOPDL_AT_BOOT_ENABLE=0x00
+
+###############################################################################
+# Loader service version
+# NFC service checks for LS version 2.0 or 2.1
+# LS2.0 0x20
+# LS2.1 0x21
+# LS2.2 0x22
+# AT NFC service intialization
+NXP_LOADER_SERVICE_VERSION=0x21
+###############################################################################
+# Timeout value in milliseconds for NFCC standby mode.The range is between 5000 msec to 20000 msec and zero is to disable.
+NXP_NFCC_STANDBY_TIMEOUT=0
+
+###############################################################################
+# Dynamic RSSI feature enable
+# Disable 0x00
+# Enable 0x01
+NXP_AGC_DEBUG_ENABLE=0x01
+###############################################################################
+# Virtual Mode ESE and Wired Mode ongoing delay Wired Mode
+# For Technology routing to ESE Technology Mask = 4
+# For ISO-DEP Protocol routing to ESE Mask = 2
+# It can also take TECH|PROTO = 6
+# To ignore the delay set mask to = 0
+NXP_ESE_WIRED_PRT_MASK=0x00
+
+###############################################################################
+# Virtual Mode UICC and Wired Mode ongoing delay Wired Mode
+# For Technology routing to UICC Technology Mask = 4
+# For ISO-DEP Protocol routing to UICC set Mask = 2
+# For Select AID Routing to UICC set Mask = 1
+# It can also take values TECH|PROTO|SELECT_AID = 7 , 6 , 5 ,3 .To ignore delay set mask = 0
+NXP_UICC_WIRED_PRT_MASK=0x00
+
+################################################################################
+# RF field true delay Wired Mode
+# delay wired mode = 1
+# allow wired mode = 0
+NXP_WIRED_MODE_RF_FIELD_ENABLE=0x00
+
+###############################################################################
+# UICC mode supported
+# Disable 0x00
+# Enable 0x01
+NXP_DUAL_UICC_ENABLE=0x00
+###############################################################################
+# Config to allow adding aids
+# NFC on/off is required after this config
+# 1 = enabling adding aid to NFCC routing table.
+# 0 = disabling adding aid to NFCC routing table.
+NXP_ENABLE_ADD_AID=0x01
+###############################################################################
+# JCOP-3.3 continuous process timeout in msec and value should be in Hexadecimal.
+# JCOP CP TIMEOUT
+NXP_CP_TIMEOUT={00, 77}
+###############################################################################
+# Enable/Disable checking default proto SE Id
+# Disable 0x00
+# Enable 0x01
+NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01
+###############################################################################
+# NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE
+# Enable/Disable block number checks for china transit use case
+# Enable 0x01
+# Disable 0x00
+NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01
+###############################################################################
+# Wired mode resume timeout vaule in wired mode resume feature enable
+NXP_WIREDMODE_RESUME_TIMEOUT = 0x02
+###############################################################################
+# Power to eSE is controlled by DH or PMU depending on following configurations
+# define DH_PWR_CONTROL 1
+# define PMU_PWR_CONTROL 2
+
+NXP_ESE_POWER_DH_CONTROL=1
+
+###############################################################################
+# NXP PMU Support configuration is sent if PMU_PWR_CONTROL is configured
+# External PMU available in phone ON and phone OFF case if NXP_ESE_POWER_EXT_PMU=1
+# External PMU available only in phone ON case if NXP_ESE_POWER_EXT_PMU=2
+
+NXP_ESE_POWER_EXT_PMU=2
+
+###############################################################################
+# Enable/Disable mifare desfire CE prio feature
+# Disable 0x00
+# Enable 0x01
+NXP_MIFARE_DESFIRE_DISABLE=0x00
+
+###############################################################################
+# Whether to allow wired mode in desfire and mifare CLT
+# Disable 0x00
+# Enable 0x01
+NXP_ALLOW_WIRED_IN_MIFARE_DESFIRE_CLT=0x00
+
+###############################################################################
+# Extended APDU length for ISO_DEP
+ISO_DEP_MAX_TRANSCEIVE=0x0105
+
diff --git a/proprietary-files.txt b/proprietary-files.txt
index 0135f35..6eeeb2d 100644
--- a/proprietary-files.txt
+++ b/proprietary-files.txt
@@ -544,6 +544,9 @@ vendor/lib64/unnhal-acc-adreno.so
vendor/lib64/unnhal-acc-common.so
vendor/lib64/unnhal-acc-hvx.so
+# NFC
+vendor/lib/libpn553_fw.so
+
# OMX
vendor/lib/libAlacSwDec.so
vendor/lib/libApeSwDec.so
diff --git a/sdm710.mk b/sdm710.mk
index 141d07c..8581105 100644
--- a/sdm710.mk
+++ b/sdm710.mk
@@ -230,6 +230,19 @@ PRODUCT_PACKAGES += \
PRODUCT_PACKAGES += \
android.hardware.neuralnetworks@1.3.vendor
+# NFC
+PRODUCT_PACKAGES += \
+ android.hardware.nfc@1.2-service \
+ android.hardware.secure_element@1.2.vendor \
+ com.android.nfc_extras \
+ libchrome.vendor \
+ NfcNci \
+ SecureElement \
+ Tag
+
+PRODUCT_COPY_FILES += \
+ $(LOCAL_PATH)/nfc/libnfc-nxp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nxp.conf
+
# OMX
PRODUCT_PACKAGES += \
libOmxAacEnc \