From 8c75fd775c840f0e07c7ffb1d6d46d5720e8c833 Mon Sep 17 00:00:00 2001 From: Arian Date: Tue, 14 Apr 2020 16:36:51 +0200 Subject: [PATCH] davinci: nfc: Import configs Change-Id: I965f7ec1069e0d9de161fbd9d909cf3d5ee2e6e9 --- configs/nfc/libnfc-nci.conf | 126 +++++++++++ configs/nfc/libnfc-nxp.conf | 434 ++++++++++++++++++++++++++++++++++++ device.mk | 4 + 3 files changed, 564 insertions(+) create mode 100644 configs/nfc/libnfc-nci.conf create mode 100644 configs/nfc/libnfc-nxp.conf diff --git a/configs/nfc/libnfc-nci.conf b/configs/nfc/libnfc-nci.conf new file mode 100644 index 0000000..3af3081 --- /dev/null +++ b/configs/nfc/libnfc-nci.conf @@ -0,0 +1,126 @@ +########################## Start of libnfc-nci.conf ########################### +############################################################################### +# Application options +NFC_DEBUG_ENABLED=1 + +############################################################################### +# performance measurement +# Change this setting to control how often USERIAL log the performance (throughput) +# data on read/write/poll +# defailt is to log performance dara for every 100 read or write +#REPORT_PERFORMANCE_MEASURE=100 + +############################################################################### +# File used for NFA storage +NFA_STORAGE="/data/nfc" + +############################################################################### +# Configure the default NfcA/IsoDep techology and protocol route. Can be +# either a secure element (e.g. 0xF4) or the host (0x00) +#DEFAULT_ISODEP_ROUTE=0x00 + +############################################################################### +## Default poll duration (in ms) +## The defualt is 500ms if not set +NFA_DM_DISC_DURATION_POLL=500 + +############################################################################### +# Force UICC to only listen to the following technology(s). +# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. +# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F +UICC_LISTEN_TECH_MASK=0x07 + +############################################################################### +# Force HOST listen feature enable or disable. +# 0: Disable +# 1: Enable +HOST_LISTEN_ENABLE=0x01 + +############################################################################### +# When screen is turned off, specify the desired power state of the controller. +# 0: power-off-sleep state; DEFAULT +# 1: full-power state +# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used) +SCREEN_OFF_POWER_STATE=1 + +############################################################################### +# Force tag polling for the following technology(s). +# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. +# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | +# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 | +# NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO | +# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE. +# +# Notable bits: +# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ +# NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */ +# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ +# NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */ +# NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */ +# NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology active mode */ +POLLING_TECH_MASK=0x4F + +############################################################################### +# Force P2P to only listen for the following technology(s). +# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. +# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F | +# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE +# +# Notable bits: +# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ +# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ +# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40 /* NFC Technology A active mode */ +# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80 /* NFC Technology F active mode */ +P2P_LISTEN_TECH_MASK=0x45 + +############################################################################### +PRESERVE_STORAGE=0x01 + +############################################################################### +# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h. +# The value is set to 3 by default as it assumes we will discover 0xF2, +# 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced +# so that the stack will not wait any longer than necessary. +# Maximum EE supported number +# NXP PN547C2 0x02 +# NXP PN65T 0x03 +# NXP PN548C2 0x02 +# NXP PN66T 0x03 +NFA_MAX_EE_SUPPORTED=0x03 + +############################################################################## +# Deactivate notification wait time out in seconds used in ETSI Reader mode +# 0 - Infinite wait +NFA_DM_DISC_NTF_TIMEOUT=100 + +############################################################################### +# AID_MATCHING constants +# AID_MATCHING_EXACT_ONLY 0x00 +# AID_MATCHING_EXACT_OR_PREFIX 0x01 +# AID_MATCHING_PREFIX_ONLY 0x02 +#AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03 +AID_MATCHING_MODE=0x03 + +############################################################################### +# Preferred Secure Element for Technology based routing +# eSE 0x01 +# UICC 0x02 +NXP_PRFD_TECH_SE=0x01 + +################################################################################ +#Set bit to 1 , black list is enabled +#Set bit to 0, to disable balcklist +NFA_AID_BLOCK_ROUTE=0x01 + +################################################################################ +# Maximum WTX requests entertained by MW +NXP_WM_MAX_WTX_COUNT=50 + +################################################################################ +#Set the default Felica T3T System Code : +#This settings will be used when application does not set this parameter +DEFAULT_SYS_CODE={FE:FF} + +######################################################################### +#Set NCI credit notification timeout value +NXP_NCI_CREDIT_NTF_TIMEOUT=2 diff --git a/configs/nfc/libnfc-nxp.conf b/configs/nfc/libnfc-nxp.conf new file mode 100644 index 0000000..f554bed --- /dev/null +++ b/configs/nfc/libnfc-nxp.conf @@ -0,0 +1,434 @@ +#################### This file is used by NXP NFC NCI HAL ##################### +############################################################################### +# Application options +# Logging Levels +# NXPLOG_DEFAULT_LOGLEVEL 0x01 +# ANDROID_LOG_DEBUG 0x03 +# ANDROID_LOG_WARN 0x02 +# ANDROID_LOG_ERROR 0x01 +# ANDROID_LOG_SILENT 0x00 +NXPLOG_EXTNS_LOGLEVEL=0x03 +NXPLOG_NCIHAL_LOGLEVEL=0x03 +NXPLOG_NCIX_LOGLEVEL=0x03 +NXPLOG_NCIR_LOGLEVEL=0x03 +NXPLOG_FWDNLD_LOGLEVEL=0x03 +NXPLOG_TML_LOGLEVEL=0x03 +NFC_DEBUG_ENABLED=1 + +############################################################################### +# Nfc Device Node name +NXP_NFC_DEV_NODE="/dev/nq-nci" + +################################################################################# +#VEN Toggle Config +#Disable = 0x00 +#Enable = 0x01 +ENABLE_VEN_TOGGLE=0x00 + +############################################################################### +# Extension for Mifare reader enable +MIFARE_READER_ENABLE=0x01 + +############################################################################### +# File name for Firmware +NXP_FW_NAME="libsn100u_fw.so" + +############################################################################### +# System clock source selection configuration +#define CLK_SRC_XTAL 1 +#define CLK_SRC_PLL 2 +NXP_SYS_CLK_SRC_SEL=0x02 + +############################################################################### +# System clock frequency selection configuration +#define CLK_FREQ_13MHZ 1 +#define CLK_FREQ_19_2MHZ 2 +#define CLK_FREQ_24MHZ 3 +#define CLK_FREQ_26MHZ 4 +#define CLK_FREQ_38_4MHZ 5 +#define CLK_FREQ_52MHZ 6 +NXP_SYS_CLK_FREQ_SEL=0x02 + +############################################################################### +# The timeout value to be used for clock request acknowledgment +# min value = 0x01 to max = 0x06 +#NXP_SYS_CLOCK_TO_CFG=0x06 + +############################################################################### +# The delay to try to start PLL/XTAL when using sys clock 256/fc units = ~18.8 us +# min value = 0x01 to max = 0x1F +NXP_CLOCK_REQ_DELAY=0x1F + +############################################################################### +# NXP proprietary settings +NXP_ACT_PROP_EXTN={2F, 02, 00} + +############################################################################### +# NFC forum profile settings +NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00} + +############################################################################### +# NXP TVDD configurations settings +# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported, +# out of them only one can be configured at a time. +#NXP_EXT_TVDD_CFG=0x02 + +############################################################################### +#config1:SLALM, 3.3V for both RM and CM +#NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C} + +############################################################################### +#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM, +#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms +#NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C} + +############################################################################### +# Core configuration rf field filter settings to enable set to 01 to disable set +# to 00 last bit +#NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00 } + +############################################################################### +# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set +# to 0x00 +#NXP_I2C_FRAGMENTATION_ENABLED=0x00 + +############################################################################### +#set autonomous mode +# disable autonomous 0x00 +# enable autonomous 0x01 +NXP_CORE_SCRN_OFF_AUTONOMOUS_ENABLE=0x00 + +############################################################################### +#Enable SWP full power mode when phone is power off +#NXP_SWP_FULL_PWR_ON=0x00 + +################################################################################ +#This is used to configure UICC2 at boot time. +# UICC2 0x03 +NXP_DEFAULT_UICC2_SELECT=0x03 + +############################################################################### +# CE when Screen state is locked +# This setting is for DEFAULT_AID_ROUTE, +# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE +# Disable 0x00 +# Enable 0x01 +NXP_CE_ROUTE_STRICT_DISABLE=0x01 + +############################################################################### +#Timeout in secs +NXP_SWP_RD_TAG_OP_TIMEOUT=0x01 + +############################################################################### +#Set the default AID route Location : +#This settings will be used when application does not set this parameter +# host 0x00 +# eSE 0x01 +# UICC 0x02 +# UICC2 0x03 +DEFAULT_AID_ROUTE=0x01 + +############################################################################### +#Set the Mifare Desfire route Location : +#This settings will be used when application does not set this parameter +# host 0x00 +# eSE 0x01 +# UICC 0x02 +# UICC2 0x03 +DEFAULT_ISODEP_ROUTE=0x01 + +############################################################################### +#Set the Mifare CLT route Location : +#This settings will be used when application does not set this parameter +# host 0x00 +# eSE 0x01 +# UICC 0x02 +# UICC2 0x03 +DEFAULT_MIFARE_CLT_ROUTE=0x01 + +############################################################################### +#Set the Felica CLT route Location : +#This settings will be used when application does not set this parameter +# eSE 0x01 +# UICC 0x02 +# UICC2 0x03 +DEFAULT_FELICA_CLT_ROUTE=0x01 + +############################################################################### +#Set the default AID Power state : +#This settings will be used when application does not set this parameter +# bit pos 0 = Switch On +# bit pos 1 = Switch Off +# bit pos 2 = Battery Off +# bit pos 3 = Screen off unlock +# bit pos 4 = Screen On lock +# bit pos 5 = Screen Off lock +DEFAULT_AID_PWR_STATE=0x3B + +############################################################################### +#Set the Mifare Desfire Power state : +#This settings will be used when application does not set this parameter +# bit pos 0 = Switch On +# bit pos 1 = Switch Off +# bit pos 2 = Battery Off +# bit pos 3 = Screen off unlock +# bit pos 4 = Screen On lock +# bit pos 5 = Screen Off lock +DEFAULT_DESFIRE_PWR_STATE=0x3B + +############################################################################### +#Set the Mifare CLT Power state : +#This settings will be used when application does not set this parameter +# bit pos 0 = Switch On +# bit pos 1 = Switch Off +# bit pos 2 = Battery Off +# bit pos 3 = Screen off unlock +# bit pos 4 = Screen On lock +# bit pos 5 = Screen Off lock +DEFAULT_MIFARE_CLT_PWR_STATE=0x3B + +############################################################################### +#Set the Felica CLT Power state : +#This settings will be used when application does not set this parameter +# bit pos 0 = Switch On +# bit pos 1 = Switch Off +# bit pos 2 = Battery Off +# bit pos 3 = Screen off unlock +# bit pos 4 = Screen On lock +# bit pos 5 = Screen Off lock +DEFAULT_FELICA_CLT_PWR_STATE=0x3B + +############################################################################### +#Set the default Felica T3T System Code OffHost route Location : +#This settings will be used when application does not set this parameter +# host 0x00 +# eSE 0x01 +# UICC 0x02 +# UICC2 0x03 +DEFAULT_SYS_CODE_ROUTE=0x00 + +############################################################################### +# AID Matching platform options +# AID_MATCHING_L 0x01 +# AID_MATCHING_K 0x02 +#AID_MATCHING_PLATFORM=0x01 + +############################################################################### +# eSE interface options +# NFC 0x01 +# SPI 0x02 +NXP_P61_LS_DEFAULT_INTERFACE=0x02 + +############################################################################### +#CHINA_TIANJIN_RF_SETTING +#Enable 0x01 +#Disable 0x00 +#NXP_CHINA_TIANJIN_RF_ENABLED=0x01 + +############################################################################### +#SWP_SWITCH_TIMEOUT_SETTING +# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60]. +# Timeout in milliseconds, for example +# No Timeout 0x00 +# 10 millisecond timeout 0x0A +#NXP_SWP_SWITCH_TIMEOUT=0x0A + +############################################################################### +# Flashing Options Configurations +# FLASH_UPPER_VERSION 0x01 +# FLASH_DIFFERENT_VERSION 0x02 +# FLASH_ALWAYS 0x03 +NXP_FLASH_CONFIG=0x02 + +############################################################################### +# eSE interface options for JCOP Download +# NFC 0x01 +# SPI 0x02 +NXP_P61_JCOP_DEFAULT_INTERFACE=0x02 + +############################################################################### +# Option to perform LS update every boot +# Enable 0x01 +# Disable 0x00 +NXP_LS_FORCE_UPDATE_REQUIRED=0x00 + +############################################################################### +# Option to perform JCOP update every boot +# Enable 0x01 +# Disable 0x00 +NXP_JCOP_FORCE_UPDATE_REQUIRED=0x00 + +############################################################################### +# Bail out mode +# If set to 1, NFCC is using bail out mode for either Type A or Type B poll. +# Set this parameter value to 1 if Android Beam is enabled, else set to 0. +NFA_POLL_BAIL_OUT_MODE=0x00 + +############################################################################### +# White list of Hosts +# This values will be the Hosts(NFCEEs) in the HCI Network. +DEVICE_HOST_WHITE_LIST={C0, 80} + +############################################################################### +# Choose the presence-check algorithm for type-4 tag. If not defined, the default value is 1. +# 0 NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm +# 1 NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block +# 2 NFA_RW_PRES_CHK_ISO_DEP_NAK; Type - 4 tag protocol iso-dep nak presence check +# command is sent waiting for rsp and ntf. +PRESENCE_CHECK_ALGORITHM=2 + +############################################################################### +# Enable/Disable checking default proto SE Id +# Disable 0x00 +# Enable 0x01 +NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01 + +############################################################################### +# Vendor Specific Proprietary Protocol & Discovery Configuration +# Set to 0xFF if unsupported +# byte[0] NCI_PROTOCOL_18092_ACTIVE +# byte[1] NCI_PROTOCOL_B_PRIME +# byte[2] NCI_PROTOCOL_DUAL +# byte[3] NCI_PROTOCOL_15693 +# byte[4] NCI_PROTOCOL_KOVIO +# byte[5] NCI_PROTOCOL_MIFARE +# byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO +# byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME +# byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME +NFA_PROPRIETARY_CFG={05, FF, FF, 06, 81, 80, 70, FF, FF} + +############################################################################### +#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE +#Enable/Disable block number checks for china transit use case +#Enable 0x01 +#Disable 0x00 +#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01 + +################################################################################################### +#This flags will enable different modes of Lx Debug based on bits of the Byte0 & Byte1 + #Byte 0: + # |_________Bit Mask_______| Debug Mode + # b7|b6|b5|b4|b3|b2|b1|b0| + # | | |X | | | | | Enable L1 Events (ISO14443-4, ISO18092) + # | | | |X | | | | Enable L2 Reader Events(ROW specific) + # | | | | |X | | | Enable Felica SystemCode + # | | | | | |X | | Enable Felica RF (all Felica CM events) + # | | | | | | |X | Enable L2 Events Card Emulation (ISO14443-3, Modulation detected, RF Field ON/OFF) + #Byte 1: + # Enable RSSI 0x01 Byte1 Byte0 + # Disable RSSI 0x00 \__ __/ +# e.g. NXP_CORE_PROP_SYSTEM_DEBUG=0x0110 ==> L1 with RSSI +#NXP_CORE_PROP_SYSTEM_DEBUG=0x11 + +############################################################################### +#Enable NXP NCI runtime parser library +#Enable 0x01 +#Disable 0x00 +NXP_NCI_PARSER_LIBRARY=0x00 + +############################################################################### +# Timeout value in milliseconds for JCOP OS download to complete +OS_DOWNLOAD_TIMEOUT_VALUE=60000 + +############################################################################### +# Forcing HOST to listen for a selected protocol +# 0x00 : Disable Host Listen +# 0x01 : Enable Host to Listen (A) for ISO-DEP tech A +# 0x02 : Enable Host to Listen (B) for ISO-DEP tech B +# 0x04 : Enable Host to Listen (F) for T3T Tag Type Protocol tech F +# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F +HOST_LISTEN_TECH_MASK=0x07 + +############################################################################### +# Enable forward functionality +# Disable 0x00 +# Enable 0x01 +FORWARD_FUNCTIONALITY_ENABLE=0x01 + +############################################################################### +# Configure the NFC Extras to open and use a static pipe. If the value is +# not set or set to 0, then the default is use a dynamic pipe based on a +# destination gate (see NFA_HCI_DEFAULT_DEST_GATE). Note there is a value +# for each EE (ESE/SIM) +OFF_HOST_ESE_PIPE_ID=0x16 +OFF_HOST_SIM_PIPE_ID=0x0A + +############################################################################### +#Set the Felica T3T System Code Power state : +#This settings will be used when application does not set this parameter +#Update Power state as per NCI2.0 +DEFAULT_SYS_CODE_PWR_STATE=0x39 + +############################################################################### +#Default Secure Element route id +DEFAULT_OFFHOST_ROUTE=0x02 + +############################################################################### +#Maximum SMB transceive wait for response +NXP_SMB_TRANSCEIVE_TIMEOUT=2000 + +############################################################################### +# Firmware file type +#.so file 0x01 +#.bin file 0x02 +NXP_FW_TYPE=0x01 + +############################################################################ +# Extended APDU length for ISO_DEP +ISO_DEP_MAX_TRANSCEIVE=0xFEFF + +######################################################################### +# Support for Amendment I SEMS specification +# Support SEMS Amendment I 0x01 +# Support NXP LS client 0x00 +NXP_GP_AMD_I_SEMS_SUPPORTED=0x01 + +######################################################################### +# Enable/Disable default route to host in case default se is not active +# Disable feature 0x00 +# Enable feature 0x01 +NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01 + +############################################################################### +# Assign terminal number to each interface based on system config +NXP_SPI_SE_TERMINAL_NUM="eSE1" +NXP_NFC_SE_TERMINAL_NUM="eSE2" +#NXP_VISO_SE_TERMINAL_NUM="eSE3" + +############################################################################### +#For static or dynamic dual UICC feature support +#Enable static dual uicc feature by setting value 0x00 +#Enable dynamic dual uicc feature by setting value 0x01 +NXP_DUAL_UICC_ENABLE=0x01 + +############################################################################### +# Time to wait by DH when NFCC will report eSE Cold Temp Error. +# The value is as per the UM and in seconds +NXP_SE_COLD_TEMP_ERROR_DELAY=0x05 + +############################################################################### +# Set configuration optimization decision setting +# Enable = 0x01 +# Disable = 0x00 +NXP_SET_CONFIG_ALWAYS=0x01 +############################################################################### +#OffHost ESE route location for MultiSE +#ESE = 01 +OFFHOST_ROUTE_ESE={01} +############################################################################### +#OffHost UICC route location for MultiSE +#UICC1 = 02 +#UICC2 = 03 +OFFHOST_ROUTE_UICC={02:03} +################################################################################ +# This will enable power state required for GSMA testing. +# When this is enabled , then default AID route power state is added with this power state +# If any aid with power state 0 is added, then this power state is used. +# bit pos 0 = Switch On +# bit pos 1 = Switch Off +# bit pos 2 = Battery Off +# bit pos 3 = Screen off unlock +# bit pos 4 = Screen On lock +# bit pos 5 = Screen Off lock +#DEFUALT_GSMA_PWR_STATE=0x3B +################################################################################# diff --git a/device.mk b/device.mk index 8182c62..21e7098 100644 --- a/device.mk +++ b/device.mk @@ -191,6 +191,10 @@ PRODUCT_PACKAGES += \ nfc_nci.nqx.default.hw \ vendor.nxp.hardware.nfc@1.2-service +PRODUCT_COPY_FILES += \ + $(LOCAL_PATH)/configs/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf \ + $(LOCAL_PATH)/configs/nfc/libnfc-nxp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nxp.conf + # Overlay DEVICE_PACKAGE_OVERLAYS += \ $(LOCAL_PATH)/overlay \