From ac8d73a4f2c1093b241e03271f0d2ba89733cbdf Mon Sep 17 00:00:00 2001
From: Prashanth K <prashk@qti.qualcomm.com>
Date: Thu, 7 Jul 2022 14:47:25 +0530
Subject: [PATCH] ARM: dts: msm: Pull-up Wailua GPIO 7 to detect Vbus on cinder

Vdet pin of NX5P1100 switch is goes high Vbus is supplied to it.
This DET pin is open drain PMOS output with default state low.
And its connected to GPIO 7 of Wailua which is used for detection
of vbus. Here we need to pull up GPIO 7, so that DET can go high
when Vbus is detected on NX5P switch.

Change-Id: I81298ffb779f90ba169c9ce9758b4cde9d1c0276
---
 qcom/cinder-pmic-overlay.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/qcom/cinder-pmic-overlay.dtsi b/qcom/cinder-pmic-overlay.dtsi
index 127b86f3..d17a59f3 100644
--- a/qcom/cinder-pmic-overlay.dtsi
+++ b/qcom/cinder-pmic-overlay.dtsi
@@ -88,7 +88,7 @@
 			pins = "gpio7";
 			function = "normal";
 			input-enable;
-			bias-disable;
+			bias-pull-up;
 			power-source = <0>;
 		};
 	};