Add usb-repeater with eUSB2 repeater phandle (mandatory) for allowing
eUSB2 PHY driver to call into eUSB2 repeater driver related interfaces
for reset, init and updating its configuration.
Add dummy-supply with eUSB2 repeater phandle (optional) for enforcing
probe ordering between eUSB2 repeater driver and eUSB2 PHY driver.
Change-Id: Ib295e7f2a229ab0d2541cbb1dd24a63a873b9493
Add bindings information for userspace cooling device. This cooling device
will enable the userspace thermal daemon to receive notification and
take action.
Change-Id: If76f66beffb1896ce319f11d0fd8fedad0f0f74c
SDPM driver will monitor different clocks and write the clock rate into
the respective CSR register. This document explains the devicetree
properties required by this driver.
Change-Id: I89268cc63b9ac82e601a1038e5623815ff342791
Register Policy Engine recommendations as sensor with thermal framework.
Thermal framework can mitigate cooling devices for the recommendations
from policy engine sensor.
Change-Id: Ic401b438098d9336a14d90af61e45b319601141d
PMIC chip integrated eUSB2 repeater needs 3 power supplesy:3v, 1.2v,
and 1.8v. 1.2v power supply is always on and it is not votable
through software. Hence remove usage of 1.2v power supply, and add
1.8v power supply related usage.
Change-Id: I3417fb8b3fb98daadd101e39a034141f11262aa8
Use internal ddr frequency table for ddr cooling device.
Update ddr-cdev devicetree documentation for the same.
Change-Id: I4146b7b2fc201191554b2a48a04cc0739266c462
Some firmware images support the processing of SMC calls via the
waitqueue mechanism. Add compatible string to support this feature.
Change-Id: I8bc4d4ea41c247c93683e9d0dc2e9a47de063bef
Add doorbell test node to kalama.dtsi and kalama-vm.dtsi to
validate hypervisor doorbell functionality.
Change-Id: I4b13064644f66f30915b7692efaf5bc23978155d
Add "qcom,wf-fifo-preload" property for FIFO effects to be able to
preload into pattern memory during boot up.
Change-Id: Icb11c5efc7039abe290d024288d964c651b21d4e
Add a snapshot of the msm watchdog documentation as of msm-5.10
commit<7d8f8f87df61> (dt-bindings: msm: Update msm watchdog
documentation).
Change-Id: Icb0f5793a85755f1df53aaf07d7efb48ec9ec04d
Update the Qualcomm Technologies, INC. PMIC GPIO binding documentation
to include compatible strings for the Kalama PMICS.
Kalama PMICS include PM8550, PM8550B, PM8550VE, PM8550VS, PMK8550
and PMR735D.
Change-Id: I604c478a8ec8afe79f4460a05f2c444048926cd9
Add documentation for the qcom,iommu-defer-smr-config property. This
property is useful for clients that wish to configuration of their
stream matching registers (SMRs) to a later point in time when their
driver is ready to initiate DMA transfers.
Change-Id: Ibf7f33d08361425a793684422575052402976396
Remove documentation for the qcom,deferred-regulator-disable-delay
property, as it is no longer supported.
Change-Id: Ie0beaaf082beb7d421a68b6dca3fbb66094136a7
Add documentation for device-tree bindings for EP-PCIe
driver used in msm platforms, ported from 5.4.c3.
Change-Id: I4ac9fc2fc789774b225e46df54a28465cc2b2ab9
Update bindings to mention multiple DRVs in a single RSC device.
Also update to mention SW or HW channel use and examples.
Change-Id: I75658d2383626238bcb326f8959867cefc61f9bf
Add ADSP sleep monitor document to add details
about ADSP sleep monitor and device tree properties.
Change-Id: Iceeb5d08f6d83e0eaa658211af4516f4c3957553
Since drv processor subsystem can be supported on CDSP
or LPASS based on the target, pass the name of the DRV
from device tree. Use the presence of this property as
indication of DRV support as well. New property name is
qcom,drv-name.
Change-Id: I4d03bfdd430a3eea428a6f6aee067d76d6731829
