From 131c59ce0f0f4675e22ea76db7e7eebf92e30731 Mon Sep 17 00:00:00 2001
From: Pratham Pratap <ppratap@qti.qualcomm.com>
Date: Thu, 18 Nov 2021 00:39:00 +0530
Subject: [PATCH] bindings: Add eUSB2 repeater driver related documentation

This change adds eUSB2 repeater driver related binding.

Change-Id: Iaac9e2b4e335ac8dae9d5f79c1d0b4c2ffadedf1
---
 bindings/usb/ti,eusb2-repeater.txt | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)
 create mode 100644 bindings/usb/ti,eusb2-repeater.txt

diff --git a/bindings/usb/ti,eusb2-repeater.txt b/bindings/usb/ti,eusb2-repeater.txt
new file mode 100644
index 00000000..55b98f7f
--- /dev/null
+++ b/bindings/usb/ti,eusb2-repeater.txt
@@ -0,0 +1,25 @@
+TI, eUSB2 Repeater
+
+Required properties:
+ - compatible: Should be "ti,eusb2-repeater"
+ - reg: Address and length of the register set for the device
+ - <supply-name>-supply: phandle to the regulator device tree node
+   Required "supply-name" examples are:
+	"vdd3" : 3.v supply for eUSB2 repeater
+	"vdd12" : 1.2v supply for eUSB2 repeater
+ - reset-gpio: A phandle and gpio specifier denoting the GPIO connected
+        to the RESET pin of the eUSB2 repeater.
+
+Optional properties:
+ - qcom,param-override-seq: parameter override sequence with value, reg offset
+   pair.
+
+Example:
+	eusb2_repeater@fd00 {
+		compatible = "ti,eusb2-repeater";
+		reg = <0xfd00 0xff>;
+		vdd12-supply = <&pm8841_s2_corner>;
+		vdd3-supply = <&pm8941_l6>;
+		qcom,param-override-seq = <0x4 0x57>;
+		reset-gpio = <&pm8350_gpios 6 GPIO_ACTIVE_LOW>;
+	};