diff --git a/qcom/neo-idp.dtsi b/qcom/neo-idp.dtsi
index 95df2270..a79a1531 100644
--- a/qcom/neo-idp.dtsi
+++ b/qcom/neo-idp.dtsi
@@ -62,8 +62,47 @@
 		power-source = <1>;     /* 1.8V */
 		qcom,drive-strength = <2>;
 	};
-};
 
+	bt_pon_en: bt_pon_en {
+		pins = "gpio9";
+		function = "pon_en";
+		input-disable;
+		output-high;
+		bias-pull-up;
+		power-source = <1>;     /* 1.8V */
+		qcom,drive-strength = <2>;
+	};
+
+	bt_pon_dis: bt_pon_dis {
+		pins = "gpio9";
+		function = "pon_dis";
+		input-disable;
+		output-low;
+		bias-pull-down;
+		power-source = <1>;     /* 1.8V */
+		qcom,drive-strength = <2>;
+	};
+
+	bt_poff_en: bt_poff_en {
+		pins = "gpio6";
+		function = "poff_en";
+		input-disable;
+		output-low;
+		bias-pull-down;
+		power-source = <1>;     /* 1.8V */
+		qcom,drive-strength = <2>;
+	};
+
+	bt_poff_dis: bt_poff_dis {
+		pins = "gpio6";
+		function = "poff_dis";
+		input-disable;
+		output-high;
+		bias-pull-up;
+		power-source = <1>;     /* 1.8V */
+		qcom,drive-strength = <2>;
+	};
+};
 
 &icnss2 {
 	pinctrl-names = "wlan_pon_en", "wlan_pon_dis", "wlan_poff_en", "wlan_poff_dis";
@@ -72,3 +111,13 @@
 	pinctrl-2 = <&wlan_poff_en>;
 	pinctrl-3 = <&wlan_poff_dis>;
 };
+
+
+&bluetooth {
+	pinctrl-names = "default", "bt_pon_en", "bt_pon_dis", "bt_poff_en", "bt_poff_dis";
+	pinctrl-0 = <&bt_en_sleep>;
+	pinctrl-1 = <&bt_pon_en>;
+	pinctrl-2 = <&bt_pon_dis>;
+	pinctrl-3 = <&bt_poff_en>;
+	pinctrl-4 = <&bt_poff_dis>;
+};
diff --git a/qcom/neo.dtsi b/qcom/neo.dtsi
index 5ddaf484..36b0675f 100644
--- a/qcom/neo.dtsi
+++ b/qcom/neo.dtsi
@@ -389,33 +389,13 @@
 
 	bluetooth: bt_wcn6x5x {
 		compatible = "qcom,wcn6750-bt";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_en_sleep>;
 		qcom,bt-reset-gpio = <&tlmm 46 0>; /* BT_EN */
-		qcom,bt-sw-ctrl-gpio = <&tlmm 47 0>; /* SW_CTRL */
 		qcom,wl-reset-gpio = <&tlmm 45 0>; /* WL_EN */
 
 		qcom,bt-vdd-io-supply = <&L15A>;  /* IO */
-		/* below regulators are always ON with wcn6750 */
-		qcom,bt-vdd-aon-supply = <>;
-		qcom,bt-vdd-dig-supply = <>; /* BT_CX_MX */
-		qcom,bt-vdd-rfacmn-supply = <>;
-		qcom,bt-vdd-rfa-0p8-supply = <>;
-		qcom,bt-vdd-rfa1-supply = <>; /*RFA 1p7*/
-		qcom,bt-vdd-rfa2-supply = <>; /*RFA 1p2*/
-		qcom,bt-vdd-ipa-2p2-supply = <>; /*IPA 2p2*/
-		qcom,bt-vdd-asd-supply = <>;
 
 		/* max voltage are set to regulator max voltage supported */
 		qcom,bt-vdd-io-config = <1800000 2000000 0 1>;
-		qcom,bt-vdd-aon-config = <824000 1120000 0 1>;
-		qcom,bt-vdd-dig-config = <824000 1120000 0 1>;
-		qcom,bt-vdd-rfacmn-config  = <824000 1120000 0 1>;
-		qcom,bt-vdd-rfa-0p8-config  = <824000 1120000 0 1>;
-		qcom,bt-vdd-rfa1-config = <1872000 2040000 0 1>;
-		qcom,bt-vdd-rfa2-config = <1256000 1500000 0 1>;
-		qcom,bt-vdd-ipa-2p2-config = <2200000 2210000 0 1>;
-		qcom,bt-vdd-asd-config = <2800000 3544000 0 1>;
 	};
 
 	intc: interrupt-controller@0x17200000 {