From 7c3c1b7f757333fc25f078e9a2e55cf7d888a059 Mon Sep 17 00:00:00 2001 From: Siva Kumar Akkireddi Date: Thu, 26 Sep 2019 13:58:40 +0530 Subject: [PATCH] dt-bindings: dma: sps: Add dt binding for SPS driver Add DT binding documentation for Qualcomm SPS BAM driver. Change-Id: I6597e6e331c2dda37eb5bd6368d0913449fa5ecb --- bindings/dma/sps/sps.txt | 47 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 bindings/dma/sps/sps.txt diff --git a/bindings/dma/sps/sps.txt b/bindings/dma/sps/sps.txt new file mode 100644 index 00000000..f455b1cf --- /dev/null +++ b/bindings/dma/sps/sps.txt @@ -0,0 +1,47 @@ +SPS (Smart Peripheral Switch) may be used as a DMA engine to move data +in either the Peripheral-to-Peripheral (a.k.a. BAM-to-BAM) mode or the +Peripheral-to-Memory (a.k.a. BAM-System) mode. SPS includes BAM (Bus +Access Module) hardware block, BAM DMA peripheral, and pipe memory. + +Required property: + - compatible: should be "qcom,msm-sps" or "qcom,msm-sps-4k" + +Optional properties: + - reg: offset and size for the memory mapping, including maps for + BAM DMA BAM, BAM DMA peripheral, pipe memory and reserved memory. + - reg-names: indicates various resources passed to driver (via reg + property) by name. "reg-names" examples are "bam_mem", "core_mem" + , "pipe_mem" and "res_mem". + - interrupts: IRQ line + - qcom,device-type: specify the device configuration of BAM DMA and + pipe memory. Can be one of + 1 - With BAM DMA and without pipe memory + 2 - With BAM DMA and with pipe memory + 3 - Without BAM DMA and without pipe memory + - qcom,pipe-attr-ee: BAM pipes are attributed to a specific EE, with + which we can know the pipes belong to apps side and can have the + error interrupts at the pipe level. + - clocks: This property shall provide a list of entries each of which + contains a phandle to clock controller device and a macro that is + the clock's name in hardware.These should be "clock_rpm" as clock + controller phandle and "clk_pnoc_sps_clk" as macro for "dfab_clk" + and "clock_gcc" as clock controller phandle and "clk_gcc_bam_dma_ahb_clk" + as macro for "dma_bam_pclk". + - clock-names: This property shall contain the clock input names used + by driver in same order as the clocks property.These should be "dfab_clk" + and "dma_bam_pclk". + +Example: + + qcom,sps@f9980000 { + compatible = "qcom,msm-sps"; + reg = <0xf9984000 0x15000>, + <0xf9999000 0xb000>, + <0xfe803000 0x4800>; + interrupts = <0 94 0>; + qcom,device-type = <2>; + qcom,pipe-attr-ee; + clocks = <&clock_rpm clk_pnoc_sps_clk>, + <&clock_gcc clk_gcc_bam_dma_ahb_clk>; + clock-names = "dfab_clk", "dma_bam_pclk"; + };