diff --git a/bindings/cnss/icnss.txt b/bindings/cnss/icnss.txt index 77db7afc..75456104 100644 --- a/bindings/cnss/icnss.txt +++ b/bindings/cnss/icnss.txt @@ -40,6 +40,7 @@ Optional properties: - qcom,vreg_ol_cpr: Specifies voltage regulator used for OL CPR vote - qcom,pon-gpio-control: Boolean context flag to enable PMIC GPIO based power sequence trigger via SPMI + - wcn-hw-version: Parameter to differentiate between different WCN HW Versions WLAN SMP2P sub nodes diff --git a/qcom/neo-usb.dtsi b/qcom/neo-usb.dtsi index 5a1d3c09..0e8ac35e 100644 --- a/qcom/neo-usb.dtsi +++ b/qcom/neo-usb.dtsi @@ -37,6 +37,7 @@ qcom,core-clk-rate = <133333333>; qcom,core-clk-rate-hs = <66666667>; + qcom,hibernate-skip-thaw; qcom,pm-qos-latency = <2>; diff --git a/qcom/parrot-wcn6755.dtsi b/qcom/parrot-wcn6755.dtsi new file mode 100644 index 00000000..9c64edb7 --- /dev/null +++ b/qcom/parrot-wcn6755.dtsi @@ -0,0 +1,158 @@ +#include + +&soc { + bluetooth: bt_wcn6750 { + compatible = "qcom,wcn6750-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_sleep>; + qcom,bt-reset-gpio = <&tlmm 35 0>; /* BT_EN */ + qcom,bt-sw-ctrl-gpio = <&tlmm 61 0>; /* SW_CTRL */ + qcom,wl-reset-gpio = <&tlmm 36 0>; /* WL_EN */ + tsens = "quiet-therm"; + + qcom,bt-vdd-io-supply = <&L22B>; /* IO */ + qcom,bt-vdd-aon-supply = <&S7B>; + qcom,bt-vdd-dig-supply = <&S7B>; /* BT_CX_MX */ + qcom,bt-vdd-rfacmn-supply = <&S7B>; + qcom,bt-vdd-rfa-0p8-supply = <&S7B>; + qcom,bt-vdd-rfa1-supply = <&S8E>; /*RFA 1p7*/ + qcom,bt-vdd-rfa2-supply = <&S8B>; /*RFA 1p2*/ + qcom,bt-vdd-ipa-2p2-supply = <&S9B>; /*IPA 2p2*/ + //qcom,bt-vdd-asd-supply = <&L11C>; + + /* max voltage are set to regulator max voltage supported */ + qcom,bt-vdd-io-config = <1800000 2000000 0 1>; + qcom,bt-vdd-aon-config = <824000 1174000 0 1>; + qcom,bt-vdd-dig-config = <824000 1174000 0 1>; + qcom,bt-vdd-rfacmn-config = <824000 1174000 0 1>; + qcom,bt-vdd-rfa-0p8-config = <824000 1174000 0 1>; + qcom,bt-vdd-rfa1-config = <1872000 2040000 0 1>; + qcom,bt-vdd-rfa2-config = <1256000 1654000 0 1>; + qcom,bt-vdd-ipa-2p2-config = <2200000 2208000 0 1>; + //qcom,bt-vdd-asd-config = <2800000 3544000 0 1>; + }; + + qcom,smp2p-wpss { + smp2p_wlan_2_in: qcom,smp2p-wlan-2-in { + qcom,entry-name = "wlan_soc_wake"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + smp2p_wlan_2_out: qcom,smp2p-wlan-2-out { + qcom,entry-name = "wlan_soc_wake"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_wlan_3_out: qcom,smp2p-wlan-3-out { + qcom,entry-name = "wlan_ep_power_save"; + #qcom,smem-state-cells = <1>; + }; + }; + + wpss_pas: remoteproc-wpss@8a00000 { + firmware-name = "qca6755/wpss.mdt"; + }; + + icnss2: qcom,wcn6750 { + compatible = "qcom,wcn6750"; + reg = <0x17210040 0x0>, + <0xb0000000 0x10000>; + reg-names = "msi_addr", "smmu_iova_ipa"; + qcom,rproc-handle = <&wpss_pas>; + iommus = <&apps_smmu 0x1c00 0x1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + + qcom,iommu-dma = "fastmap"; + qcom,iommu-faults = "stall-disable", "HUPCF", "non-fatal"; + qcom,iommu-dma-addr-pool = <0xa0000000 0x10000000>; + qcom,iommu-geometry = <0xa0000000 0x10010000>; + dma-coherent; + qcom,fw-prefix; + qcom,wlan; + tsens = "quiet-therm"; + wcn-hw-version = "qca6755"; + qcom,wlan-msa-fixed-region = <&wlan_fw_mem>; + vdd-cx-mx-supply = <&S7B>; + qcom,vdd-cx-mx-config = <880000 1120000 0 0 1>; + vdd-1.8-xo-supply = <&S8E>; + qcom,vdd-1.8-xo-config = <1872000 2040000 0 0 0>; + vdd-1.3-rfa-supply = <&S8B>; + qcom,vdd-1.3-rfa-config = <1256000 1500000 0 0 0>; + + qcom,smem-states = <&smp2p_wlan_1_out 0>, + <&smp2p_wlan_2_out 0>, + <&smp2p_wlan_3_out 0>; + qcom,smem-state-names = "wlan-smp2p-out", + "wlan-soc-wake-smp2p-out", + "wlan-ep-powersave-smp2p-out"; + + mboxes = <&qmp_aop 0>; + qcom,vreg_ol_cpr ="s7b"; + + icnss_cdev_apss: qcom,icnss_cdev1 { + #cooling-cells = <2>; + }; + + icnss_cdev_wpss: qcom,icnss_cdev2 { + #cooling-cells = <2>; + }; + + qcom,smp2p_map_wlan_1_in { + interrupts-extended = <&smp2p_wlan_1_in 0 0>, + <&smp2p_wlan_1_in 1 0>; + interrupt-names = "qcom,smp2p-force-fatal-error", + "qcom,smp2p-early-crash-ind"; + }; + + qcom,smp2p_map_wlan_2_in { + interrupts-extended = <&smp2p_wlan_2_in 0 0>; + interrupt-names = "qcom,smp2p-soc-wake-ack"; + }; + }; +}; + +&qupv3_se2_i2c { + status = "ok"; + nq@64 { + compatible = "rtc6226"; + reg = <0x64>; + fmint-gpio = <&tlmm 105 0>; + vdd-supply = <&L5E>; + rtc6226,vdd-supply-voltage = <2800000 2800000>; + rtc6226,vdd-load = <15000>; + vio-supply = <&L22B>; + rtc6226,vio-supply-voltage = <1800000 1800000>; + }; +};