diff --git a/qcom/parrot-pinctrl.dtsi b/qcom/parrot-pinctrl.dtsi
index f860e5b3..b11c47ef 100644
--- a/qcom/parrot-pinctrl.dtsi
+++ b/qcom/parrot-pinctrl.dtsi
@@ -10,6 +10,21 @@
 		wakeup-parent = <&pdc>;
 		qcom,gpios-reserved = <0 1 2 3 38>;
 
+
+		bt_en_sleep: bt_en_sleep {
+				mux {
+						pins = "gpio35";
+						function = "gpio";
+				};
+
+				config {
+						pins = "gpio35";
+						drive-strength = <2>;
+						output-low;
+						bias-pull-down;
+				};
+		};
+
 		pri_aux_pcm_clk {
 			pri_aux_pcm_clk_sleep: pri_aux_pcm_clk_sleep {
 				mux {
diff --git a/qcom/parrot-wcn6750.dtsi b/qcom/parrot-wcn6750.dtsi
index 090334bf..8047b7ab 100644
--- a/qcom/parrot-wcn6750.dtsi
+++ b/qcom/parrot-wcn6750.dtsi
@@ -1,3 +1,37 @@
+
+&soc {
+	bluetooth: bt_wcn6750 {
+		compatible = "qcom,wcn6750-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en_sleep>;
+		qcom,bt-reset-gpio = <&tlmm 35 0>; /* BT_EN */
+		qcom,bt-sw-ctrl-gpio = <&tlmm 61 0>; /* SW_CTRL */
+		qcom,wl-reset-gpio = <&tlmm 36 0>; /* WL_EN */
+
+		qcom,bt-vdd-io-supply = <&L22B>;  /* IO */
+		qcom,bt-vdd-aon-supply = <&S7B>;
+		qcom,bt-vdd-dig-supply = <&S7B>; /* BT_CX_MX */
+		qcom,bt-vdd-rfacmn-supply = <&S7B>;
+		qcom,bt-vdd-rfa-0p8-supply = <&S7B>;
+		qcom,bt-vdd-rfa1-supply = <&S8E>; /*RFA 1p7*/
+		qcom,bt-vdd-rfa2-supply = <&S8B>; /*RFA 1p2*/
+		qcom,bt-vdd-ipa-2p2-supply = <&S9B>; /*IPA 2p2*/
+		//qcom,bt-vdd-asd-supply = <&L11C>;
+
+		/* max voltage are set to regulator max voltage supported */
+		qcom,bt-vdd-io-config = <1800000 2000000 0 1>;
+		qcom,bt-vdd-aon-config = <824000 1174000 0 1>;
+		qcom,bt-vdd-dig-config = <824000 1174000 0 1>;
+		qcom,bt-vdd-rfacmn-config  = <824000 1174000 0 1>;
+		qcom,bt-vdd-rfa-0p8-config  = <824000 1174000 0 1>;
+		qcom,bt-vdd-rfa1-config = <1872000 2040000 0 1>;
+		qcom,bt-vdd-rfa2-config = <1256000 1654000 0 1>;
+		qcom,bt-vdd-ipa-2p2-config = <2200000 2208000 0 1>;
+		//qcom,bt-vdd-asd-config = <2800000 3544000 0 1>;
+	};
+
+};
+
 &qupv3_se2_i2c {
 	status = "ok";
 	nq@64 {