mirror of
https://github.com/Evolution-X-Devices/kernel_xiaomi_sm8450-devicetrees
synced 2026-02-01 08:51:30 +00:00
vic
12 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Anil Veshala Veshala
|
0824b4b568 |
dt-bindings: i2c: Add flag for panic notifier
Panic notifier is registered if new dt property qcom,panic-dump-collect is set true. Change-Id: I280372ad0407b6d19b844a78e0543baa2484f7d2 |
||
Viken Dadhaniya
|
9eb610728e |
dt-bindings: i2c-msm-geni: Remove qcom,rtl_se property
Now onwards we will set rtl base SE flag using HW register So DT property is not required. Change-Id: I5f99329642c13577f9a8db176f65324100a6c9f0 |
||
|
Anil Veshala Veshala
|
ffc0cadf28 |
dt-bindings: i2c: Add flag for RTL based QUP SE
This flag is to take care of a workaround change for cancel command bypass. Change-Id: I41b4981ea8a345dd84f95c832594836c1e227487 |
||
Elliot Berman
|
b54d17c2f5 |
bindings: Merge android-mainline (cbf07d5) into msm-waipio
Merge snapshot of bindings from android-mainline commit cbf07d5
("FROMLIST: clk: sunxi-ng: add support for the Allwinner A100 CCU").
Change-Id: Ica9bc8abf055fb28bdcd33dad244e3ba5fe1a04b
|
||
|
Elliot Berman
|
936530a982 |
Merge tag 'kernel.lnx.5.4-200510' into msm-waipio
* tag 'kernel.lnx.5.4-200510': ARM: dts: msm: Add cooling-cells property in battery device for lahaina ARM: dts: msm: Add hyp core control driver node for Lahaina ARM: dts: msm: Add PMIC die temperature mitigation for Lahaina ARM: dts: msm: Add modem junction mitigation rule for Lahaina dt-bindings: qcom-pmic-gpio: Add PM7250B, PM6350 and PM6150L bindings ARM: dts: msm: Add QUPv3 and GPI DT nodes on SHIMA ARM: dts: msm: Add Modem pil node for Shima ARM: dts: msm: add stub interconnect devices for sm8150 dt-bindings: interconnect: add interconnect bindings ARM: dts: msm: enable superspeed plus redriver on QRD ARM: dts: msm: set io coherent on cvp DT ARM: dts: msm: Add CDSP pil node for Shima ARM: dts: msm: Add LPASS pil node for Shima dt-bindings: interconnect: add interconnect bindings dt-bindings: regulator: Add snapshot of rpm-smd-regulator doc ARM: dts: msm: Remove unused PMK8350 ADC channels for holi ARM: dts: msm: Add stub regulators for sdx65 ARM: dts: msm: Add usb bypass mode and disable smmu for lahaina ARM: dts: msm: Add DT snapshots for PM6350, PM7250b and PM6150l ARM: dts: msm: usb_phy pin support usb_phy and gpio mode ARM: dts: msm: Add SPMI PMIC arbiter device for holi ARM: dts: msm: Mark USB DP/DM interrupt as dual edge on Lahaina dt-bindings: Add support for event RP access from DDR for GPI and GCI ARM: dts: msm: Add RUMI specific console property for Shima ARM: dts: msm: Add QUPv3_0 and SE5 dt nodes for SHIMA ARM: dts: msm: clean up cache-size properties ARM: dts: msm: Add kernel cmdline to increase the dmesg buffer size ARM: dts: msm: Change TUI heap type to MSM_CARVEOUT ARM: dts: msm: Add modem ADC thermistors for Lahaina dt-bindings: thermal: Add support for mmw ADC thermistors ARM: dts: msm: Enable CDSP cooling devices for Lahaina ARM: dts: msm: Enable uC HOLB monitor feature ARM: dts: msm: Add initial ION heaps for holi ARM: dts: msm: Add memory map for holi ARM: dts: msm: Adding external VR viewer support ARM: dts: msm: add qcom,ipa-gpi_event_rp_ddr property ARM: dts: msm: Add secure_buffer and qcom,scm device on SM8150 ARM: dts: msm: Add initial ION heaps for SM8150 ARM: dts: msm: Add qrtr haven for trusted vm ARM: dts: msm: Add qrtr haven for lahaina ARM: dts: msm: Add neuron block service for trusted vm ARM: dts: msm: Add neuron block service for lahaina ARM: dts: msm: Add dts node for boot_stats ARM: dts: msm: Add TLMM direct connect interrupts for sm8150 dt-bindings: Add dt-binding for mpm counter ARM: dts: msm: Increase memory-hotplug region for lahaina dt-bindings: thermal: Add support for modem DSC cooling devices dt-bindings: thermal: Add support for CDSP cooling devices via qmi cdev ARM: dts: qcom: add dt entry needed for avb ARM: dts: msm: Add missing compatible of cmd_db for shima ARM: dts: msm: Add dummy clock nodes for clock controllers for HOLI bindings: clock: Add support for HOLI clock controller ARM: dts: msm: Add system_pm as child of APPS RSC for shima ARM: dts: msm: add nvmem cell for haptics CL brake in Lahaina Revert "Revert "ARM: dts: msm: increase ipa modem smem size to 36k on Lahaina"" ARM: dts: msm: Add SPS node for Shima ARM: dts: msm: add sleep state for PCIe0 CLKREQ for lahaina ARM: dts: msm: Add the mem-buf device for the trusted VM ARM: dts: msm: Add modem DSC mitigation nodes for lahaina ARM: dts: msm: Enable IO coherency with USB device on Lahaina ARM: dts: msm: Add UFS support for shima ARM: dts: msm: Enable SD card on Lahaina QRD platform ARM: dts: msm: Update gpio drive strength for soundwire tx ARM: dts: msm: Add stub regulators for holi ARM: dts: msm: Adding device tree node for holi pinctrl dt-bindings: Adding pinctrl devicetree binding for holi ARM: dts: msm: Add initial device tree for Holi ARM: dts: msm: add smmu devices for Shima ARM: dts: msm: Add DMA coherency hint to vidc context banks Revert "ARM: dts: msm: increase ipa modem smem size to 36k on Lahaina" ARM: dts: msm: Update ddr bandwidth levels for A660 ARM: dts: msm: Add ARM PMU node for Shima ARM: dts: msm: Add SLPI pinctrl for SM8150 bindings: pinctrl: Add device-tree bindings for SLPI pinctrl driver bindings: input: qcom-hv-haptics: add nvmem to store CL brake settings bindings: input: qcom-hv-haptics: Add qcom,fifo-empty-threshold ARM: dts: msm: Add clock required for IPA QoS configuration ARM: dts: msm: Add LLCC entry for Shima ARM: dts: msm: Add ipcc test nodes for Shima ARM: dts: msm: add PDR support for PMIC Glink on Lahaina bindings: pmic-glink: add protection domain restart (PDR) support ARM: dts: msm: do not compile Non-VM specific DT files ARM: dts: msm: Update QMP Phy init sequence for Lahaina ARM: dts: msm: Add dcc registers lists for lahaina ARM: dts: msm: Update the RPMHCC node for SHIMA ARM: dts: msm: Modify voltage ranges for PM8350B AMOLED regulator dt-bindings: qpnp-amoled: Update voltage ranges for PM8150A/PM8350B ARM: dts: msm: Remove NFC I3C DT node for Lahaina ARM: dts: msm: Add clocks for UFS QOS configuration on Lahaina ARM: dts: msm: use voltage mitigation for pop mem in lahaina ARM: dts: msm: Enable CPU voltage cooling device for lahaina dt-bindings: thermal: Use the correct vendor string for voltage device ARM: dts: msm: add stub interconnect devices for SHIMA dt-bindings: Add documentation for the "non-coherent" SMMU dt-binding dt-bindings: interconnect: add interconnect bindings ARM: dts: msm: Add charger reference to USB node on Lahaina dt-bindings: i2c-msm-geni: Add DT bindings for le-vm flag ARM: dts: qcom: reduce PM8008J LDO min voltages for Lahaina ARM: dts: msm: Add support for votable GDSCs ARM: dts: msm: Remove epss_l3_shared node bindings: clock: Add support for SHIMA clock controllers ARM: dts: msm: Add IMEM entry for Shima ARM: dts: msm: Add device trees for LahainaP variant dt-bindings: msm: Add compatible strings for lahainap ARM: dts: msm: Add Common driver, I2C and GSI DT nodes in trustedvm ARM: dts: msm: add capacity and DPC properties for Shima ARM: dts: msm: Add LPM support for sm8150 ARM: dts: msm: Update RSC nodes for sm8150 ARM: dts: msm: Update PDC node for sm8150 ARM: dts: msm: Add "regulator-allow-set-load" for PM8350B IBB regulator dt-bindings: LLCC: Add "qcom,shima-llcc" compatible property ARM: dts: msm: increase ipa modem smem size to 36k on Lahaina ARM: dts: msm: Update ufs bus vote for Lahaina ARM: dts: msm: Add USB nodes for Shima dt-bindings: thermal: Add documentation for CPU voltage cooling device ARM: dts: msm: Disable tpdm ddr for lahaina ARM: dts: msm: Add cdsp rpmsg entry in Lahaina ARM: dts: msm: Add spss glink ssr entry for Lahaina dt-bindings: usb: Add Gen2 Tx Compliance tuning property for dwc3 ARM: dts: msm: Add entry for bluetooth sw_ctrl gpio ARM: dts: msm: Increase the dwc3 reg address range for Lahaina Revert "ARM: dts: msm: Clean-up vidc DT node" ARM: dts: msm: Add pinctrl for PM8350C GPIO 9 on Lahaina platforms ARM: dts: msm: Add pshold to Shima ARM: dts: msm: add msm_rtb tracing ARM: dts: msm: Add core hang detection to dt for Shima ARM: dts: msm: Move qbt_handler to soc ARM: dts: msm: Add boot-enabled flag support for spcom ARM: dts: msm: Add boot-enabled flag support for spss ARM: dts: msm: use 'dma-coherent-hint-cached' for fastrpc nodes Revert "dt-bindings: msm: vidc: Clean-up dt properties" ARM: dts: msm: Enable smmu for SD card on Lahaina ARM: dts: msm: remove aux devices dt-bindings: clock: Add rpmh clock bindings for Shima ARM: dts: msm: Add regulators for sa8155 ARM: dts: msm: Remove spss glink ssr entry for Lahaina ARM: dts: msm: add proxy consumers for L2B and L1C regulators on Lahaina dt-bindings: net: Add bindings for qcom,qrtr-haven ARM: dts: msm: Set no-status-check-on-disable for Lahaina PCIe GDSCs ARM: dts: msm: Add snapshot of all SM8150 and SA8155 DT files ARM: dts: msm: enable qmap flow control feature ARM: dts: msm: Add RSC device bindings for Shima ARM: dts: msm: Add wakeup parent for Shima TLMM ARM: dts: msm: add PDC device bindings for Shima ARM: dts: msm: Add support for ION for the trusted-VM ARM: dts: msm: add swr dmic's as codecs bindings: sound: Add swr-haptics binding document ARM: dts: msm: define continuous splash memory region for lahaina dt-bindings: msm: Add compatible strings for sa8155 ARM: dts: msm: Add initial device tree for SM8150 ARM: dts: msm: Add LPM support for shima ARM: dts: msm: add subsystem restart (SSR) for PMIC Glink on Lahaina dt-bindings: pmic-glink: add subsystem restart (SSR) support dt-bindings: qpnp-lcdb-regulator: Add LCDB regulator documentation ARM: dts: msm: Add labels for lpi_cx and lpi_mx rails ARM: dts: msm: Enable UFS HS Rate-B on Lahaina ARM: dts: msm: add FE CPU dai for hearing aid ARM: dts: msm: Add AMOLED regulator on pm8350b for Lahaina ARM: dts: msm: Enable CPU cooling device for lahaina dt-bindings: Add support for boot enabled subsystem bindings: input: qcom-hv-haptics: Change to use 8-bit FIFO data ARM: dts: msm: Add swr-slave regulator device node in haptics module bindings: input: qcom-hv-haptics: add swr-slave regulator subnode ARM: dts: msm: Add AOP QMP nodes for shima ARM: dts: msm: Add glink entries for Shima ARM: dts: msm: Add HWSPINLOCK, SMEM and SMP2P for Shima ARM: dts: msm: Add IPCC node for Shima ARM: dts: msm: Add initial ION heaps for Shima ARM: dts: msm: Add spss glink ssr entry for Lahaina ARM: dts: msm: add 4 new compute DSP context banks for lahaina ARM: dts: qcom: modify initramfs size ARM: dts: msm: Add memory map for shima ARM: dts: msm: Add EUD extcon handler for primary USB on Lahaina ARM: dts: msm: Set dr_mode as OTG on Lahaina ARM: dts: msm: add node for Atmel touch on Lahaina bindings: spmi: spmi-pmic-arb: define consumer qcom,pmic-arb property ARM: dts: msm: add UCSI connector and USB port on Lahaina ARM: dts: msm: add CPU dai for additional proxy ports ARM: dts: msm: Fix the dc_noc io register space and size ARM: dts: msm: Add pinctrls for external regulaors in camera for Lahaina ARM: dts: msm: Map QDSS gfx debug registers for Lahaina ARM: dts: msm: Add apb clock to GPU device for Lahaina ARM: dts: msm: Update disp_bcm_voter to only wait for AMC ARM: dts: msm: add wil6210 device for Lahaina platforms ARM: dts: qcom: add sde-rsc-rpmh driver to disp_rsc node ARM: dts: msm: Enable Kryo erp driver for Shima ARM: dts: msm: Manage rumi identification with platform flag ARM: dts: msm: add node for Focaltech touch on Lahaina ARM: dts: msm: add gpio cells property bindings: spmi: spmi-pmic-arb: mark interrupt properties as optional Revert "ARM: dts: msm: change camera DTSI inclusions for Lahaina qrd" ARM: dts: msm: change camera DTSI inclusions for Lahaina qrd ARM: dts: msm: Update QMP Phy init sequence for Lahaina ARM: dts: msm: Add SCM node for Shima ARM: dts: msm: Update all gdsc time out to 500 us ARM: dts: msm: add pinctrl for secondary display for lahaina ARM: dts: msm: add wsa883x as codecs ARM: dts: msm: add wcd938x as a codec ARM: dts: msm: Correct sleep clk frequency to 32khz dt-bindings: net: Add bindings for qcom,neuron ARM: dts: msm: Add configuration for vref regulator vote for lahaina ARM: dts: msm: Add GPU thermal zone configuration for lahaina ARM: dts: msm: Add BCL configuration for lahaina ARM: dts: msm: Add CPU thermal configuration for lahaina bindings: Add dt-bindings for pdc controller on qc SoCs bindings: ARM: add devicetree binding for describing PSCI firmware bindings: Add snapshot of dt bindings for arm-cache bindings: Add dt-bindings for arch_timer dt-bindings: Add compatible strings for rmph clk for sm8150 dt-bindings: Add compatible strings for gcc clock on sm8150 dt-bindings: msm: Add compatible strings for sa5155 dt-bindings: Add snapshot of hyp_core_ctl driver documentation ARM: dts: msm: Update the GSI gpii mask for lahaina ARM: dts: msm: add msm id in shima-rumi-overlay.dts dt-bindings: leds-qpnp-vibrator-ldo: Add vibrator LDO documentation ARM: dts: msm: Add pin configuration for USB3 PHY portselect dt-bindings: usb: Add super speed re-driver bindings ARM: dts: msm: Enable LPM and remove the gear limits on Lahaina dt-bindings: msm: vidc: Clean-up dt properties ARM: dts: msm: Add modem QMI sensor and cdev configuration for lahaina dt-bindings: thermal: Add LMH DCVSh devicetree documentation ARM: dts: msm: add charger thermal mitigation levels for Lahaina MTP ARM: dts: msm: Clean-up vidc DT node ARM: dts: msm: Update CNSS S12B voltage level to 1.35v ARM: dts: msm: Enable smmu for ufs on Lahaina ARM: dts: msm: Upgrade Lahaina's memory map to version 4 ARM: dts: msm: Add the mem-buf device for Lahaina ARM: dts: msm: remove CX, MX and MMCX always-on configuration for Lahaina Change-Id: I99734e502f1611c3d3a4652815fc4701348e2f7b |
||
Venkata Narendra Kumar Gutta
|
229b528f41 |
Merge tag 'kernel.lnx.5.4-200305.1' into msm-waipio
* tag 'kernel.lnx.5.4-200305.1': ARM: dts: msm: Add the CX GDSC to the IOMMU device ARM: dts: msm: Move IOMMU clocks to the GPU device ARM: dts: msm: Enable USB secondary port on Lahaina bindings: power: supply: Add thermal mitigation for qcom,battery-charger ARM: dts: msm: Add dummy clock nodes for clock controllers for SHIMA ARM: dts: msm: enable haptics for Lahaina QRD ARM: dts: msm: Update S12B and S1C voltages ARM: dts: msm: add support for dynamic port map ARM: dts: msm: add wil6210 pinctrl configurations for Lahaina ARM: dts: msm: Add NFC I3C device node for Lahaina ARM: dts: msm: Enable SD card support on Lahaina ARM: dts: msm: Add SD card bus voting details for Lahaina ARM: dts: msm: Add CVP AXI reset pulse ARM: dts: msm: Add stub regulators for shima ARM: dts: msm: add route between va and swr dmic's Revert "ARM: dts: msm: remove hdmi codec enable" ARM: dts: msm: update SWR_DMIC to 0 on Lahaina QRD device ARM: dts: msm: Mark APPS SMMU interconnect votes as active-only dt-bindings: Document qcom,active-only ARM: dts: qcom: Update trusted vm DT entries ARM: dts: msm: Add pinctrl node for TLMM on Shima SoC bindings: pinctrl: Add device-tree bindings for Shima pinctrl driver ARM: dts: msm: Add initial device tree for Shima ARM: dts: msm: Correct cmb size of turing llm turing for lahaina ARM: dts: msm: add DMIC DT node for QRD DMIC device ARM: dts: msm: Add camera device tree inclusions for Lahaina ARM: dts: qcom: specify ADC channels for Lahaina PMIC temp-alarm devices ARM: dts: msm: Update devicetree to enable FM on lahaina ARM: dts: msm: Add ADC support for Lahaina ARM: dts: msm: set PMIC thermal zone trip points to critical for Lahaina ARM: dts: msm: Update S12B and S1C voltages ARM: dts: msm: Add fix for SW_CTRL mapped to wrong GPIO66 on MSM side ARM: dts: msm: remove hdmi codec enable ARM: dts: msm: add external audio codec ARM: dts: msm: Correct the interconnect names node ARM: dts: msm: Open up gpu power levels upto NOM ARM: dts: msm: Add hwkm node for lahaina bindings: Add device-tree bindings for hwkm driver ARM: dts: msm: Add camera device tree inclusions for Lahaina ARM: dts: msm: Add WLAN updates to HSP DTSI overlays ARM: dts: msm: Add ICE region for UFS ARM: dts: msm: update PCIe0 and PCIe1 PHY for lahaina v1 ARM: dts: msm: Fix FM chip ON issue ARM: dts: msm: Add snapshot of memshare dt documentation ARM: dts: msm: Add support for FM in lahaina platform dt-bindings: thermal: qcom-adc-tm: add PMIC7 ADC_TM_IIO compatible string dt-bindings: msm: add snapshot of msm_11ad doc ARM: dts: msm: add swr dmics as aux dev ARM: dts: msm: Update CNSS S12B voltage level to 1.35v ARM: dts: msm: Update soundwire DMIC configuration on Lahaina ARM: dts: msm: update PCIe0 and PCIe1 CLKREQ default func select on lahaina ARM: dts: msm: Add dt node for Focaltech touch IC ARM: dts: msm: Add tpdm lpass lpi for lahaina ARM: dts: msm: Add cti trig_out gpio for Lahaina ARM: dts: msm: Add dt node for ST Micro touch IC ARM: dts: msm: add gpio pincntrl for touch ARM: dts: msm: fix DSI reset gpio pincntrl ARM: dts: msm: update audio dt node for lahaina qrd device ARM: dts: qcom: Add regulator changes for Lahaina ARM: dts: msm: Reorganize the pinctrl node ARM: dts: qcom: Rename lahaina-svm1 to trustedvm ARM: dts: msm: update i2c slave address for fsa4480 on Lahaina ARM: dts: msm: Add a new device tree file for HSP configuration ARM: dts: msm: Add VBUS/ID configuration for USB secondary port on Lahaina ARM: dts: msm: update audio device tree on lahaina ARM: dts: msm: Add usb_audio_qmi_dev node ARM: dts: msm: Fix the gem_noc node address and reg size ARM: dts: msm: Disable tpdm shrm for Lahaina ARM: dts: msm: Enable turing llm tpdm for lahaina ARM: dts: msm: Add mem_dump node for lahaina ARM: dts: msm: disable second USB port for Lahaina QRD dt-bindings: haven: Add bindings for qcom,vm-1.0 ARM: dts: msm: Rectify I3C node DT properties ARM: dts: qcom: add flash/torch LEDs on PM8350C for Lahaina platforms ARM: dts: msm: Disable USB secondary port on Lahaina ARM: dts: qcom: Reserved GuestVM memory and add its PIL driver dt-bindings: Add bindings for guestvm-loader ARM: dts: msm: Add permittable RFA2 (min,max) voltage ARM: dts: msm: Limit ETR iova range for lahaina ARM: dts: msm: Add IPCC test nodes for end to end verification ARM: dts: msm: Add CNSS2 node for Lahaina ARM: dts: msm: Update dtsi for page recycle and cleanup ARM: dts: qcom: update RPMh regulator min/max voltage limits for Lahaina ARM: dts: msm: update PCIe L5 and L6 current vote on lahaina ARM: dts: msm: Add Altmode PMIC GLINK client for Lahaina bindings: Add altmode-glink ARM: dts: msm: Restrict default CMA region below 0xE0000000 ARM: dts: qcom: add Glink SPMI debug controller device for Lahaina ARM: dts: msm: include display platform DT files bindings: spmi: add QTI Glink SPMI debug controller binding documentation ARM: dts: msm: add proxy votes for display regulators arm64: dts: qcom: Add secondary VM dts file for lahaina ARM: dts: msm: Correct the typo of remote-endpoint for lahaina ARM: dts: msm: limit gear to 3 for Lahaina ARM: dts: qcom: add haptics on PM8350B for Lahaina CDP/MTP ARM: dts: msm: Update Lahaina USB3 QMP UNI PHY init settings ARM: dts: msm: Hot fix for Lahaina ARM: dts: qcom: Link restart_reason nvmem cell to qcom,pshold ARM: dts: qcom: add nvmem cell for PMK8350 SDAM2 restart reason ARM: dts: msm: enable PCIe0 and PCIe1 on lahaina dt-bindings: Document the qcom,dynamic-heap binding dt-bindings: Add device-tree bindings for the memory sharing driver ARM: dts: msm: add PMIC Glink and clients for Lahaina ARM: dts: msm: Update fastrpc SIDs and masks ARM: dts: qcom: add VDD_MX and CX subnodes for MMCX dependencies on Lahaina ARM: dts: msm: Enable video driver ARM: dts: qcom: Update limit-rate and add limit-phy-submode on Lahaina ARM: dts: msm: set MSR range in CSR for Lahaina dt-bindings: extcon-usb-gpio: Document optional vbus-out-gpio ARM: dts: msm: Update changes for audio device tree on Lahaina ARM: dts: msm: Fix secondary USB port related aggre_noc clock ARM: dts: msm: add initial PHY sequence for PCIe0 and PCIe1 on lahaina ARM: dts: msm: add PCIe pipe clk mux and ext src to PCIe clock for lahaina ARM: dts: msm: add aggre_noc_pcie_*_axi_clk for PCIe on lahaina ARM: dts: msm: Add dtsi changes for qbt_handler dt-bindings: Add documentation for qbt_handler ARM: dts: msm: Add TSENS thermal nodes for lahaina ARM: dts: qcom: change all rpmh-regulator LDO default modes to HPM ARM: dts: msm: Do not create logical mappings for the secure CDSP heap ARM: dts: msm: Disable watchdog for Lahaina-RUMI ARM: dts: msm: Update the arch_timer frequency ARM: dts: msm: Specify address/size cells for &soc on lahaina-rumi dt-bindings: input: qcom-hv-haptics: Add initial binding document ARM: dts: msm: Add secure display heap ARM: dts: msm: Add alias for HSUART node ARM: dts: qcom: switch to I2C control of PM8008 PMIC regulators for Lahaina ARM: dts: msm: Include ipcc_test dtsi file in lahaina.dtsi file ARM: dts: msm: vidc: Add register value mask ARM: dts: msm: Fix ufs OCS error ARM: dts: msm: Fix USB PHY resets ARM: dts: msm: Add interconnects to USB on Lahaina dt-bindings: usb: Document interconnects usage for qcom,dwc-usb3-msm bindings: qti-flash: Fix slave id for pm8350c in DT example dt-bindings: Add snapshot of QPNP AMOLED regulator bindings bindings: soc: qcom: add QTI battery glink debug ARM: dts: msm: Add PWM and RGB LED devices for PM8350C ARM: dts: msm: add a CX, MX and MMCX Turbo level proxy request for Lahaina ARM: dts: qcom: update RPMh regulator voltage limits for Lahaina ARM: dts: msm: Add QSEE IRQ bridge entry for Lahaina ARM: dts: msm: Add device tree overlay for Lahaina CDP ARM: dts: msm: Add regulator entries for Lahaina ARM: dts: msm: add qcom,fastrpc-gids property on Lahaina ARM: dts: msm: Update supply routing for swr dmic on Lahaina bindings: pinctrl: Add device-tree bindings for Lahaina pinctrl driver ARM: dts: msm: add display sde nodes to target dtsi ARM: dts: msm: Replace swr dmic mic bias number on Lahaina bindings: Documentation: Update swr mic device tree documentation ARM: dts: msm: Add and enable disp rsc support for Lahaina ARM: dts: msm: add proxy consumers for L5B and L6B regulators on Lahaina dt-bindings: regulator: add rpmh-regulator bindings dt-bindings: regulator: add refgen regulator bindings ARM: dts: msm: Add SD card entries for Lahaina ARM: dts: msm: Add bluetooth power and slimbus slave node ARM: dts: msm: Add regmap and clocks for interconnects on Lahaina ARM: dts: msm: Add swr dmic nodes on Lahaina bindings: Documentation: Update swr mic device tree documentation bindings: Documentation: Add swr mic device tree documentation dt-bindings: add documentation for leds-qti-flash bindings: power: supply: add QTI battery charger ARM: dts: msm: Do not bypass SMMU for ufshc dt-bindings: Add dt binding for Focaltech driver ARM: dts: msm: fix ipa smp2p node issue ARM: dts: msm: Add the lahaina gpu dtsi ARM: dts: msm: update DPC properties for Lahaina ARM: dts: msm: Change the audio routing sequence ARM: dts: msm: add documentation qcom,tx-wrapper-cache-max-size ARM: dts: msm: add qcom,tx-wrapper-cache-max-size property ARM: dts: msm: Add the offlineable memory sizes for Lahaina ARM: dts: msm: Update audio device tree overlay for lahaina ARM: dts: msm: Add turing etm support for Lahaina ARM: dts: qcom: Remove UFS PHY reset control on Lahaina ARM: dts: msm: add pinctrl information for Lahaina target bindings: Documentation: Add wsa883x device tree documentation dt-bindings: regulator: pm8008-regulator: add OCP interrupt support ARM: dts: msm: Move apps_rsc before interconnect devices ARM: dts: msm: Set USB mode as peripheral only on Lahaina bindings: add audio device tree for lahaina bindings: Documentation: add QTI audio documentation ARM: dts: msm: Add USB Uni PHY related device node on Lahaina ARM: dts: msm: Update and enable the debug cc measure nodes ARM: dts: msm: Add QTI crypto device-tree node for Lahaina bindings: Add device-tree bindings for QTI crypto drivers dt-bindings: input: Add dt bindings for STMicro ARM: dts: qcom: Add dtsi node entry for Slimbus in lahaina ARM: dts: msm: use clock driver to vote for IPA code ARM: dts: msm: Add ACTLR settings for the APPS and GFX SMMUs dt-bindings: nfc: Add Documentation for I2C NFC devicetree node ARM: dts: msm: Fix GSI IRQ type warnings on lahaina dt-bindings: thermal: Add ADC_TM documentation for PMIC7 ARM: dts: msm: Add TSENS node support for lahaina ARM: dts: msm: Add jtagmm device node for lahaina ARM: dts: msm: Add initial device tree for Lahaina QRD Module ARM: dts: msm: update port number to hex format ARM: dts: msm: Add qseecom node for Lahaina ARM: dts: msm: Enable s1 in fastmap for QUPv3 drivers on lahaina ARM: dts: msm: Add 2-wire UART node for lahaina ARM: dts: msm: Add cpufreq-hw node for Lahaina dt-bindings: ufs: Add compitable string for V4 UFS PHY on Lahaina ARM: dts: msm: add reset support for UFS on Lahaina ARM: dts: msm: Add pshold to Lahaina dt-bindings: qti-tri-led: Update reg definition dt-bindings: pwm-qti-lpg: Update reg definition ARM: dts: qcom: add dt entry needed for avb dt-bindings: android: add entries for android ARM: dts: msm: Enable QRNG driver for lahaina dt-bindings: cpufreq: Add msm-cpufreq bindings snapshot dt-bindings: Add USB audio QMI driver bindings ARM: dts: msm: Add SPS driver node for Lahaina ARM: dts: msm: Add etm save/restore for Lahaina dt-bindings: rng: Add DT binding entry for msm-rng ARM: dts: msm: Disable usb1 on Lahaina RUMI ARM: dts: msm: Add EUD node for Lahaina ARM: dts: msm: Add device tree overlay support for Lahaina ARM: dts: msm: add documentation tx-napi dt-bindings: slim-msm-ngd: Add dt bindings for slimbus driver dt-bindings: nfc: Add Documentation for I3C NFC devicetree node ARM: dts: msm: Add coresight device tree for Lahaina dt-bindings: devfreq: add support for L3 voting in devfreq_icc dt-bindings: devfreq: add support for shared core-dev tables dt-bindings: iio: adc: Add PMIC7 VADC bindings ARM: dts: msm: add volume up gpio-keys device for Lahaina boards ARM: dts: msm: add PMK8350 PON_PBS and PON_HLOS devices dt-bindings: input: add qpnp-power-on bindings ARM: dts: msm: add SPMI debug bus for Lahaina boards ARM: dts: msm: add PMIC devices for Lahaina ARM: dts: msm: Specify clock-output-names for sleep_clk on Lahaina ARM: dts: qcom: Add QUP ICC Core2x path IDs for QUPv3 node ARM: dts: msm: add initial PCIe nodes for lahaina dt-bindings: arm: msm: remove msm-bus and add ICC for PCIe dt-bindings: arm: msm: add initial devicetree documenation for MSI dt-bindings: arm: msm: add initial devicetree documentation for PCIe dt-bindings: clocks: Add debugcc clock bindings for Lahaina dt-bindings: pinctrl: qcom-pmic-gpio: add PMR735A and PMR735B bindings dt-bindings: rtc: rtc-pm8xxx: Add binding documentation for pmk8350 rtc ARM: dts: msm: add SPMI PMIC arbiter device for Lahaina ARM: dts: msm: Add L3 devfreq devices for Lahaina ARM: dts: msm: Update SIDs for test devices dt-bindings: cpufreq: Add cpufreq firmware bindings ARM: dts: msm: add spss_utils to lahaina ARM: dts: msm: enable ipa smp2p ARM: dts: msm: Update the smem size for Lahaina ARM: dts: msm: Add limit rate on G4 for Lahaina rumi ARM: dts: msm: Add ufs bus voting details for Lahaina ARM: dts: qcom: Add spcom to support SPU on lahaina ARM: dts: msm: Add ion heap for Secure Processor on lahaina ARM: dts: msm: Add interconnect l3 epss devices for Lahaina ARM: dts: msm: Configure SMMU in bypass mode for Lahaina RUMI ARM: dts: msm: Add LLCC and DDR devfreq devices for Lahaina dt-bindings: interconnect: add EPSS L3 bindings ARM: dts: msm: Add QUPv3 SE and GPI DT node for lahaina dt-bindings: Add dt bindings for jtagv8 driver dt-bindings: qti-tri-led: Add bindings dt-bindings: pwm-qti-lpg: Add bindings dt-bindings: Add snapshot of thermal devicetree bindings ARM: dts: msm: enable rmtfs for Lahaina dt-bindings: Add device-tree bindings for EUD driver ARM: dts: msm: Update Lahaina's memory map to V3 dt-bindings: devfreq: add support for memory latency QoS voting dt-bindings: devfreq: add support for new memlat design dt-bindings: devfreq: add support for different ddr types dt-bindings: kgsl: Add device tree bindings for the KGSL GPU driver dt-bindings: perf: Add DT bindings for LLCC_PMU_VER2 driver dt-bindings: perf: Add DT bindings for QCOM LLCC PMU driver dt-bindings: devfreq: Add DT bindings to support OPP BW values dt-bindings: Add DT bindings to support compute bound logic ARM: dts: msm: Add vdd_cx-supply node to gcc on Lahaina dt-bindings: clocks: Update gcc clock bindings for Lahaina ARM: dts: msm: Add vdd_mx-supply node to gpu cc on Lahaina dt-bindings: clocks: Update gpucc clock bindings for Lahaina bindings: Add device-tree bindings for qseecom driver ARM: dts: msm: Add tz_log node for Lahaina bindings: Add device-tree bindings for tz_log driver dt-bindings: devfreq: Add DT bindings to add a stall cycle count event dt-bindings: Add DT bindings for specifying the count factor dt-bindings: devfreq: Make the freq-table property optional dt-bindings: devfreq: Add DT bindings to configure byte MID match ARM: dts: msm: Add smcinvoke node for Lahaina bindings: Add device-tree bindings for smcinvoke driver ARM: dts: msm: add lan-rx-napi property ARM: dts: msm: add PIL spss node to lahaina dt-bindings: Add camera devicetree bindings for lahaina ARM: dts: msm: remove SPI config property ARM: dts: msm: Update USB interrupt trigger types on Lahaina ARM: dts: msm: Enable dcc on lahaina ARM: dts: msm: update clock_rpmh device node for Lahaina dt-bindings: clock: Add rpmh clock bindings for Lahaina dt-bindings: add devicetree binding for fsa4480 ARM: dts: msm: Add USB PHY devices and related resources on Lahaina bindings: add support for qcom,ucsi-glink dt-bindings: devfreq: Add dt-bindings for BWMON HW version 5 dt-bindings: devfreq: Add DT bindings for ARM memlat driver dt-bindings: devfreq: Add support for BWMON HW version 4 dt-bindings: devfreq: Add dt-bindings for BWMON HW version 3 dt-bindings: devfreq: Add the dt bindings for clock prepare dt-bindings: devfreq: Add DT bindings for devfreq_simple device dt-bindings: devfreq: Add dt-bindings for BWMON HW version 2 dt-bindings: devfreq: Add DT bindings for bimc bwmon driver dt-bindings: devfreq: Add DT bindings for devfreq_icc device ARM: dts: msm: IPA msm bus dtsi update for Lahaina dt-bindings: i3c-master-qcom-geni: Add DT bindings for I3C GENI driver ARM: dts: msm: Update and enable clk-aop clks on Lahaina ARM: dts: qcom: add virt_clk interconnect provider dt-bindings: interconnect: Add clk_virt documentation on Lahaina ARM: dts: msm: Add USB BAM device node on Lahaina ARM: dts: msm: Add support for modem PIL ARM: dts: msm: Add SCM node dt-bindings: regulator: add proxy consumer bindings dt-bindings: pmic-glink: add qcom,pmic-glink-channel property ARM: dts: msm: Add GDSC regulator references for Lahaina's SMMUs bindings: add support for qcom,pmic-glink ARM: dts: msm: Add SSC based sensors with SLPI PIL on Lahaina ARM: dts: msm: Add modem smp2p for Lahaina ARM: dts: msm: Document kona device binding ARM: dts: msm: Add ARM PMU node for Lahaina dt-bindings: spi-msm-geni: Add DT bindings for SPI GENI driver ARM: dts: msm: Add CVP device tree for Lahaina ARM: dts: msm: add reset control support for UFS PHY on Lahaina ARM: dts: msm: Add embedded UFS device reset GPIO on Lahaina dt-bindings: nvmem: add bindings for QTI SDAM devices dt-bindings: soc: qcom: add bindings for QTI PBS devices dt-bindings: platform: msm: add bindings for qpnp-revid devices dt-bindings: spmi: spmi-pmic-arb-debug: add clock management support dt-bindings: spmi: add SPMI PMIC arbiter debug bus bindings dt-bindings: mfd: add qcom-i2c-pmic bindings ARM: dts: msm: Add Lahaina video configuration dt-bindings: pinctrl: qcom-pmic-gpio: add PM*8350* bindings dt-bindings: mfd: qcom,spmi-pmic: add documentation for qcom,can-sleep dt-bindings: gpi: Add DT bindings for GPI dmaengine driver ARM: dts: msm: Update and enable graphics clock controller on Lahaina dt-bindings: clocks: Add gpu cc clock controller bindings for Lahaina ARM: dts: msm: Add IPA dtsi entry for Lahaina dt-bindings: i2c-msm-geni: Add DT bindings for I2C GENI driver ARM: dts: msm: Add QUPV3 SE dt node for uart on Lahaina dt-bindings: Add device-tree bindings for slimbus slave driver dt-bindings: usb: Document USB qcom,usb-charger property ARM: dts: msm: add dt nodes for adsp & cdsp PIL for Lahaina ARM: dts: msm: change lan_rx_napi to lan-rx-napi bindings: usb_bam: Add USB BAM driver related documentation ARM: dts: msm: Update bus entries in pil-video node dt-bindings: media: Add video driver bindings for Lahaina ARM: dts: msm: Update USB device nodes on Lahaina dt-bindings: usb: Add bindings for MSM SSUSB dt-bindings: usb: Document dwc3 xhci-imod-value property ARM: dts: msm: add dt node for video ARM: dts: msm: Add camera pinctrl info for Lahaina bindings: Add USB PHY drivers related documentation ARM: dts: msm: Add glink entries for Lahaina ARM: dts: msm: Update and enable the cam cc node on Lahaina dt-bindings: clocks: Add cam cc clock controller bindings for Lahaina dt-bindings: Add snapshot for 5.4-rc2 ARM: dts: msm: add documentation lan_rx_napi ARM: dts: msm: Enable the secure carveout heap on Lahaina ARM: dts: msm: Unstub the DISP_CC node for Lahaina dt-bindings: clk: Add DISP_CC clock driver bindings for Lahaina ARM: dts: msm: Unstub the VIDEO_CC node for Lahaina dt-bindings: clk: Add VIDEO_CC clock driver bindings for Lahaina ARM: dts: msm: add initial device tree for Lahaina low power modes ARM: dts: msm: Add glink entry for spss on Lahaina ARM: dts: msm: Add shmbridge node for Lahaina bindings: Add device-tree bindings for qtee_shmbridge driver dt-bindings: Add spcom documentation dt-bindings: Add spss_utils documentation ARM: dts: msm: add wakeup parent for Lahaina dt-bindings: arm: snapshot of psci bindings dt-bindings: Introduce soc sleep stats bindings for QTI SoCs dt-bindings: add device bindings for DDR stats node dt-bindings: msm: add PM drivers device bindings ARM: dts: qcom: add USB GDSC supplies for Lahaina ARM: dts: qcom: switch PM8350 LDO 7 to RPMh control for Lahaina ARM: dts: qcom: add GDSC devices for Lahaina ARM: dts: qcom: add refgen regulator device for Lahaina dt-bindings: regulator: add refgen regulator bindings ARM: dts: qcom: switch to RPMh controlled PMIC regulators for Lahaina ARM: dts: qcom: add PMIC PMR735A regulator devices for Lahaina ARM: dts: msm: Add bcm voter devices for lahaina dt-bindings: interconnect: Update QTI SDM845 DT bindings dt-bindings: regulator: add rpmh-regulator bindings ARM: dts: qcom: update PMIC regulator voltage limits for Lahaina dt-bindings: of: irq: document properties for wakeup interrupt parent dt-bindings: pdc: Add SPI config register ARM: dts: msm: add capacity and DPC properties for Lahaina ARM: dts: msm: Add WDT node for Lahaina ARM: dts: msm: Update and enable the clock_gcc node on Lahaina dt-bindings: clocks: add gcc clock controller bindings for Lahaina dt-bindings: dma: sps: Add dt binding for SPS driver dt-bindings: regulator: add PMIC PM8008 regulator bindings ARM: dts: msm: remove uncessary node from IPA nodes for Lahaina SoC ARM: dts: msm: Correct the UFS PHY address space for Lahaina ARM: dts: msm: Use dt-bindings header for ION on Lahaina ARM: dts: msm: Add smp2p sleepstate node for Lahaina ARM: dts: msm: Add AOP QMP nodes for Lahaina ARM: dts: msm: Update the timer clock frequence as per RUMI E3.0 dt-bindings: arm: Add CSR/TPDM/TPDA/TGU/Remote ETM support ARM: dts: msm: add fastrpc and cdsp device nodes for lahaina dt-bindings: Add device-tree bindings for Watchdog driver ARM: dts: msm: add RSC device bindings for lahaina ARM: dts: msm: add PDC device bindings for Lahaina dt-bindings: Add documentation for the mem-offline driver ARM: dts: msm: Add core hang detection to dt bindings: Add qcom,msm-hang-detect schema dt-bindings: arm: coresight: add trace unit power property dt-bindings: Add dt bindings for memory dump dt-bindings: Add dt bindings for dcc dt-bindings: Add device-tree bindings for BT power driver dt-bindings: regulator: gdsc-regulator: add property for register retention dt-bindings: clk: gdsc-regulator: add parent supply property dt-bindings: regulator: add gdsc-regulator bindings dt-bindings: clock: add rpmh clock bindings for Kona dt-bindings: clk: add AOP clock controller bindings dt-bindings: qdsp: device-tree documentation for fastrpc and CDSP loader dt-bindings: Add device-tree bindings for rtc6226 driver ARM: dts: msm: Add IPA node for Lahaina SoC bindings: serial: Binding for serial UART driver bindings: qcom-geni-se: Common GENI driver dt-bindings: Add snapshot for 5.3-rc4 dt-bindings: qdsp: Device tree documentation for sensors ssc ARM: dts: msm: Add initial ION heaps for Lahaina ARM: dts: msm: Make the CDSP secure carveout mappable on Lahaina ARM: dts: msm: add msm_rtb tracing bindings: Add qcom,msm-rtb schema ARM: dts: msm: Add USB device nodes for Lahaina ARM: dts: msm: Add HWSPINLOCK, SMEM and SMP2P for Lahaina ARM: dts: msm: Disable the coherent KGSL IOMMU test device ARM: dts: msm: Fix major and minor versions for Lahaina boards dt-bindings: net: qrtr: Add FIFO transport bindings dt-bindings: arm: msm: Add sleepstate-smp2p bindings dt-bindings: arm: msm: Introduce qsee_ipc_irq_bridge bindings dt-bindings: arm: msm: Introduce qcom,qsee_irq bindings dt-bindings: soc: qcom: Introduce Glink Pkt bindings dt-bindings: soc: qcom: Introduce Glink Probe bindings ARM: dts: msm: Add device-tree entry for IMEM ARM: dts: msm: Add support for SCM PAS dt-bindings: Add device-tree bindings for IMEM bindings: Add device-tree bindings for secure PIL driver dt-bindings: Introduce QMP debugfs client bindings dt-bindings: mailbox: Introduce MSM_QMP bindings dt-bindings: kryo-edac: add kryo edac bindings ARM: dts: msm: Add edac node for Lahaina SoC ARM: dts: msm: Enable the graphics SMMU on Lahaina dt-bindings: Add device-tree bindings for CNSS2 driver ARM: dts: msm: Add IPCC test nodes for end to end verification ARM: dts: msm: Add IPCC node for Lahaina dt-bindings: Add device-tree bindings for IPCC driver ARM: dts: msm: Make LLCC node compatible with "qcom,lahaina-llcc" dt-bindings: LLCC: Add "qcom,lahaina-llcc" compatible property dt-bindings: Add device-tree bindings for the ION memory manager ARM: dts: msm: Add the SMMU devices for Lahaina ARM: dts: msm: Add the secure buffer device for Lahaina dt-bindings: Merge all IOMMU documentation from msm-4.19 to msm-lahaina ARM: dts: msm: Add device-tree node for LLCC driver dt-bindings: LLCC: Add "qcom,llcc-v2" compatible property ARM: dts: msm: add ufs device support for Lahaina ARM: dts: msm: add stub interconnect devices for Lahaina bindings: usb: Add bindings for USB PHY on QTI emulation platform ARM: dts: msm: Add SCM node for Lahaina SoC bindings: Add device-tree bindings for SCM driver ARM: dts: msm: Add memory carveouts as per Lahaina v2 memory map dt-bindings: interconnect: add interconnect bindings dt-bindings: Add snapshot from tmp-f686d9f ARM: dts: msm: Add pinctrl node for TLMM on Lahaina SoC bindings: pinctrl: Add device-tree bindings for Lahaina pinctrl driver ARM: dts: msm: add stub clock devices for Lahaina dt-bindings: clocks: add dummycc bindings bindings: Add snapshot of bindings with GPL-2.0 or BSD-2-Clause license ARM: dts: msm: add stub regulator devices for Lahaina dt-bindings: regulator: add stub regulator bindings ARM: dts: msm: Add initial device tree for Lahaina dt-bindings: msm: Add compatible strings for Lahaina dt-bindings: Snapshot of msm device tree binding document ARM: dts: vendor: Add an initial Makefile to the vendor dt-bindings: Add devicetree bindings to devicetree project Initial empty repository Change-Id: Icb722bcaa651702f1843582ae7f1bd9807681018 |
||
|
Venkata Narendra Kumar Gutta
|
b0e5152a74 |
dt-bindings: Add devicetree bindings to devicetree project
Add devicetree bindings snapshot to the devicetree project.
This snapshot is taken as of the
'commit 5fba1b18cfc72e264e5f3ce49020ed322aa6ac9f ("Merge 5.6-rc3
into android-mainline")' of the kernel project.
Change-Id: Ia087ab2b7d4a2616ea446a69683a8b5b821d0448
|
||
Vipin Deep Kaur
|
73eafc17f5 |
dt-bindings: i2c-msm-geni: Add DT bindings for le-vm flag
Add le-vm, a boolean flag to enable support I2C functionality in trusted VM. Add shared, a boolean flag to support multi ee I2C GSI usecase. Change-Id: Ibd95d5dac75bfa5e181869fc56e5178ab7af19f7 |
||
|
Vipin Deep Kaur
|
f3921fe438 |
dt-bindings: i2c-msm-geni: Add DT bindings for I2C GENI driver
Add dt-bindings for I2C GENI driver. Change-Id: I856cd94ec6e0e5c1b2dc3df5c92dcd88706802d6 |
||
Raghavendra Rao Ananta
|
e4b1dcc77e |
dt-bindings: Add snapshot for 5.4-rc2
Add the device-tree bindings' snapshot from tmp-abe0ec5a8133 for 5.4-rc2. Change-Id: I346809db756dd18a509ce440499d98a7fefecd16 |
||
|
Raghavendra Rao Ananta
|
430b7fac16 |
dt-bindings: Add snapshot for 5.3-rc4
Add the device-tree bindings' snapshot from tmp-9855ec2fd422 for 5.3-rc4. Change-Id: I25b0ac9b29c0347f557b87094ede86370a89a0f2 |
||
Murali Nalajala
|
719cc9aa79 |
dt-bindings: Add devicetree bindings to devicetree project
Add devicetree bindings snapshot to the devicetree project Change-Id: I20b46d194bd3b107ddcb3e35283e6dafa27adec1 |