Jishnu Prakash
ab6288be1e
dt-bindings: leds: leds-qti-flash: Add support for external LED setup
...
Add "qcom,external-led" property to indicate the flash
peripheral is used to drive external LEDs.
Change-Id: I45af0adb56d070e31505810b001773c8e032551c
2022-08-21 21:11:06 -07:00
Anjelique Melendez
ed50d9fb57
dt-bindings: leds: leds-qti-flash: Add qcom,secure-vm property
...
Add "qcom,secure-vm" property to define when a secure VM is in use.
Change-Id: I3f16e7f1efe3667cf5a100a670e8eca891bdf57e
2022-07-19 02:50:38 -07:00
Kavya Nunna
806181a42e
bindings: leds: Add use-qti-battery-interface DT property
...
Add new DT property use-qti-battery-interface for ADSP charger
designs, to allow reading the battery properties from
qti-battery-charger driver.This is needed for max current
calculations in the flash driver. If this property is not added,
flash driver will try to read these properties over the IIO interface,
which is used in non-ADSP charger designs.
Change-Id: I16ed4ca49808aa2e1e7fce03152db76f5e7ba562
2022-07-04 17:31:47 +05:30
Hui Liu
fc16e66d80
dt-bindings: leds: Add bindings for AW2016 LED device
...
Add bingings for AW2016 LED driver.
Change-Id: I9f062b081fe1ca1e99c01ff49e47dd2e2f5f0bcc
2022-05-23 02:59:47 -07:00
Jishnu Prakash
2ae88b67bc
bindings: leds: vibrator: Move vibrator LDO documentation to correct folder
...
Move vibrator LDO documentation to bindings folder.
Change-Id: I81f873ede92e25797f0f7a1d7aa40c2af382e1c9
2022-02-07 02:03:12 -08:00
Elliot Berman
7adfb2b429
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
...
Merge kernel.lnx.5.4-200915 into msm-5.10.
Change-Id: If85db2d0b92b484f2e439d72bee8c5e1056baa3f
2020-12-17 06:33:10 -08:00
Elliot Berman
b54d17c2f5
bindings: Merge android-mainline (cbf07d5) into msm-waipio
...
Merge snapshot of bindings from android-mainline commit cbf07d5
("FROMLIST: clk: sunxi-ng: add support for the Allwinner A100 CCU").
Change-Id: Ica9bc8abf055fb28bdcd33dad244e3ba5fe1a04b
2020-09-23 13:47:05 -07:00
Jishnu Prakash
adc1cd2572
dt-bindings: backlight: Update qcom-spmi-wled DT bindings
...
Add IIO properties io-channels and io-channel-names, which may
be used for WLED to read QG channels. While at it, remove usage
of PMIC revid.
Change-Id: Ib8503190f0012b85016231d9697c65407ac01a47
2020-09-02 11:41:52 +05:30
Kiran Gunda
4bc5faf5f2
dt-bindings: backlight: Add DT bindings for qcom-spmi-wled driver
...
Add DT bindings for Qualcomm SPMI WLED driver that supports
controlling backlight for LCD panels that uses pmi8998, PM8150L
and PM6150L.
This is taken as a snapshot from msm-4.19 kernel
'commit 9b82b280d402 ("arm64: defconfig: Enable dm-snapshot")'.
Change-Id: Ib32b1185e50032db66a5db833c2a39f92eafdfb4
2020-08-31 10:03:11 -07:00
Kiran Gunda
28e7373035
dt-bindings: leds: Add DT bindings for qpnp-flash-v2
...
Add DT bindings for QPNP Flash LED v2 driver that supports camera
flash operation.
This is taken as a snapshot from msm-4.19 kernel
'commit 0873aa6e66d4 (" Merge "msm: ADSPRPC: Size check before
allocating memory from DMA")'.
Change-Id: Ia7dfc335a69d15569f46a6c8d75133c8c8e9deed
2020-07-30 07:43:20 +05:30
Venkata Narendra Kumar Gutta
229b528f41
Merge tag 'kernel.lnx.5.4-200305.1' into msm-waipio
...
* tag 'kernel.lnx.5.4-200305.1':
ARM: dts: msm: Add the CX GDSC to the IOMMU device
ARM: dts: msm: Move IOMMU clocks to the GPU device
ARM: dts: msm: Enable USB secondary port on Lahaina
bindings: power: supply: Add thermal mitigation for qcom,battery-charger
ARM: dts: msm: Add dummy clock nodes for clock controllers for SHIMA
ARM: dts: msm: enable haptics for Lahaina QRD
ARM: dts: msm: Update S12B and S1C voltages
ARM: dts: msm: add support for dynamic port map
ARM: dts: msm: add wil6210 pinctrl configurations for Lahaina
ARM: dts: msm: Add NFC I3C device node for Lahaina
ARM: dts: msm: Enable SD card support on Lahaina
ARM: dts: msm: Add SD card bus voting details for Lahaina
ARM: dts: msm: Add CVP AXI reset pulse
ARM: dts: msm: Add stub regulators for shima
ARM: dts: msm: add route between va and swr dmic's
Revert "ARM: dts: msm: remove hdmi codec enable"
ARM: dts: msm: update SWR_DMIC to 0 on Lahaina QRD device
ARM: dts: msm: Mark APPS SMMU interconnect votes as active-only
dt-bindings: Document qcom,active-only
ARM: dts: qcom: Update trusted vm DT entries
ARM: dts: msm: Add pinctrl node for TLMM on Shima SoC
bindings: pinctrl: Add device-tree bindings for Shima pinctrl driver
ARM: dts: msm: Add initial device tree for Shima
ARM: dts: msm: Correct cmb size of turing llm turing for lahaina
ARM: dts: msm: add DMIC DT node for QRD DMIC device
ARM: dts: msm: Add camera device tree inclusions for Lahaina
ARM: dts: qcom: specify ADC channels for Lahaina PMIC temp-alarm devices
ARM: dts: msm: Update devicetree to enable FM on lahaina
ARM: dts: msm: Add ADC support for Lahaina
ARM: dts: msm: set PMIC thermal zone trip points to critical for Lahaina
ARM: dts: msm: Update S12B and S1C voltages
ARM: dts: msm: Add fix for SW_CTRL mapped to wrong GPIO66 on MSM side
ARM: dts: msm: remove hdmi codec enable
ARM: dts: msm: add external audio codec
ARM: dts: msm: Correct the interconnect names node
ARM: dts: msm: Open up gpu power levels upto NOM
ARM: dts: msm: Add hwkm node for lahaina
bindings: Add device-tree bindings for hwkm driver
ARM: dts: msm: Add camera device tree inclusions for Lahaina
ARM: dts: msm: Add WLAN updates to HSP DTSI overlays
ARM: dts: msm: Add ICE region for UFS
ARM: dts: msm: update PCIe0 and PCIe1 PHY for lahaina v1
ARM: dts: msm: Fix FM chip ON issue
ARM: dts: msm: Add snapshot of memshare dt documentation
ARM: dts: msm: Add support for FM in lahaina platform
dt-bindings: thermal: qcom-adc-tm: add PMIC7 ADC_TM_IIO compatible string
dt-bindings: msm: add snapshot of msm_11ad doc
ARM: dts: msm: add swr dmics as aux dev
ARM: dts: msm: Update CNSS S12B voltage level to 1.35v
ARM: dts: msm: Update soundwire DMIC configuration on Lahaina
ARM: dts: msm: update PCIe0 and PCIe1 CLKREQ default func select on lahaina
ARM: dts: msm: Add dt node for Focaltech touch IC
ARM: dts: msm: Add tpdm lpass lpi for lahaina
ARM: dts: msm: Add cti trig_out gpio for Lahaina
ARM: dts: msm: Add dt node for ST Micro touch IC
ARM: dts: msm: add gpio pincntrl for touch
ARM: dts: msm: fix DSI reset gpio pincntrl
ARM: dts: msm: update audio dt node for lahaina qrd device
ARM: dts: qcom: Add regulator changes for Lahaina
ARM: dts: msm: Reorganize the pinctrl node
ARM: dts: qcom: Rename lahaina-svm1 to trustedvm
ARM: dts: msm: update i2c slave address for fsa4480 on Lahaina
ARM: dts: msm: Add a new device tree file for HSP configuration
ARM: dts: msm: Add VBUS/ID configuration for USB secondary port on Lahaina
ARM: dts: msm: update audio device tree on lahaina
ARM: dts: msm: Add usb_audio_qmi_dev node
ARM: dts: msm: Fix the gem_noc node address and reg size
ARM: dts: msm: Disable tpdm shrm for Lahaina
ARM: dts: msm: Enable turing llm tpdm for lahaina
ARM: dts: msm: Add mem_dump node for lahaina
ARM: dts: msm: disable second USB port for Lahaina QRD
dt-bindings: haven: Add bindings for qcom,vm-1.0
ARM: dts: msm: Rectify I3C node DT properties
ARM: dts: qcom: add flash/torch LEDs on PM8350C for Lahaina platforms
ARM: dts: msm: Disable USB secondary port on Lahaina
ARM: dts: qcom: Reserved GuestVM memory and add its PIL driver
dt-bindings: Add bindings for guestvm-loader
ARM: dts: msm: Add permittable RFA2 (min,max) voltage
ARM: dts: msm: Limit ETR iova range for lahaina
ARM: dts: msm: Add IPCC test nodes for end to end verification
ARM: dts: msm: Add CNSS2 node for Lahaina
ARM: dts: msm: Update dtsi for page recycle and cleanup
ARM: dts: qcom: update RPMh regulator min/max voltage limits for Lahaina
ARM: dts: msm: update PCIe L5 and L6 current vote on lahaina
ARM: dts: msm: Add Altmode PMIC GLINK client for Lahaina
bindings: Add altmode-glink
ARM: dts: msm: Restrict default CMA region below 0xE0000000
ARM: dts: qcom: add Glink SPMI debug controller device for Lahaina
ARM: dts: msm: include display platform DT files
bindings: spmi: add QTI Glink SPMI debug controller binding documentation
ARM: dts: msm: add proxy votes for display regulators
arm64: dts: qcom: Add secondary VM dts file for lahaina
ARM: dts: msm: Correct the typo of remote-endpoint for lahaina
ARM: dts: msm: limit gear to 3 for Lahaina
ARM: dts: qcom: add haptics on PM8350B for Lahaina CDP/MTP
ARM: dts: msm: Update Lahaina USB3 QMP UNI PHY init settings
ARM: dts: msm: Hot fix for Lahaina
ARM: dts: qcom: Link restart_reason nvmem cell to qcom,pshold
ARM: dts: qcom: add nvmem cell for PMK8350 SDAM2 restart reason
ARM: dts: msm: enable PCIe0 and PCIe1 on lahaina
dt-bindings: Document the qcom,dynamic-heap binding
dt-bindings: Add device-tree bindings for the memory sharing driver
ARM: dts: msm: add PMIC Glink and clients for Lahaina
ARM: dts: msm: Update fastrpc SIDs and masks
ARM: dts: qcom: add VDD_MX and CX subnodes for MMCX dependencies on Lahaina
ARM: dts: msm: Enable video driver
ARM: dts: qcom: Update limit-rate and add limit-phy-submode on Lahaina
ARM: dts: msm: set MSR range in CSR for Lahaina
dt-bindings: extcon-usb-gpio: Document optional vbus-out-gpio
ARM: dts: msm: Update changes for audio device tree on Lahaina
ARM: dts: msm: Fix secondary USB port related aggre_noc clock
ARM: dts: msm: add initial PHY sequence for PCIe0 and PCIe1 on lahaina
ARM: dts: msm: add PCIe pipe clk mux and ext src to PCIe clock for lahaina
ARM: dts: msm: add aggre_noc_pcie_*_axi_clk for PCIe on lahaina
ARM: dts: msm: Add dtsi changes for qbt_handler
dt-bindings: Add documentation for qbt_handler
ARM: dts: msm: Add TSENS thermal nodes for lahaina
ARM: dts: qcom: change all rpmh-regulator LDO default modes to HPM
ARM: dts: msm: Do not create logical mappings for the secure CDSP heap
ARM: dts: msm: Disable watchdog for Lahaina-RUMI
ARM: dts: msm: Update the arch_timer frequency
ARM: dts: msm: Specify address/size cells for &soc on lahaina-rumi
dt-bindings: input: qcom-hv-haptics: Add initial binding document
ARM: dts: msm: Add secure display heap
ARM: dts: msm: Add alias for HSUART node
ARM: dts: qcom: switch to I2C control of PM8008 PMIC regulators for Lahaina
ARM: dts: msm: Include ipcc_test dtsi file in lahaina.dtsi file
ARM: dts: msm: vidc: Add register value mask
ARM: dts: msm: Fix ufs OCS error
ARM: dts: msm: Fix USB PHY resets
ARM: dts: msm: Add interconnects to USB on Lahaina
dt-bindings: usb: Document interconnects usage for qcom,dwc-usb3-msm
bindings: qti-flash: Fix slave id for pm8350c in DT example
dt-bindings: Add snapshot of QPNP AMOLED regulator bindings
bindings: soc: qcom: add QTI battery glink debug
ARM: dts: msm: Add PWM and RGB LED devices for PM8350C
ARM: dts: msm: add a CX, MX and MMCX Turbo level proxy request for Lahaina
ARM: dts: qcom: update RPMh regulator voltage limits for Lahaina
ARM: dts: msm: Add QSEE IRQ bridge entry for Lahaina
ARM: dts: msm: Add device tree overlay for Lahaina CDP
ARM: dts: msm: Add regulator entries for Lahaina
ARM: dts: msm: add qcom,fastrpc-gids property on Lahaina
ARM: dts: msm: Update supply routing for swr dmic on Lahaina
bindings: pinctrl: Add device-tree bindings for Lahaina pinctrl driver
ARM: dts: msm: add display sde nodes to target dtsi
ARM: dts: msm: Replace swr dmic mic bias number on Lahaina
bindings: Documentation: Update swr mic device tree documentation
ARM: dts: msm: Add and enable disp rsc support for Lahaina
ARM: dts: msm: add proxy consumers for L5B and L6B regulators on Lahaina
dt-bindings: regulator: add rpmh-regulator bindings
dt-bindings: regulator: add refgen regulator bindings
ARM: dts: msm: Add SD card entries for Lahaina
ARM: dts: msm: Add bluetooth power and slimbus slave node
ARM: dts: msm: Add regmap and clocks for interconnects on Lahaina
ARM: dts: msm: Add swr dmic nodes on Lahaina
bindings: Documentation: Update swr mic device tree documentation
bindings: Documentation: Add swr mic device tree documentation
dt-bindings: add documentation for leds-qti-flash
bindings: power: supply: add QTI battery charger
ARM: dts: msm: Do not bypass SMMU for ufshc
dt-bindings: Add dt binding for Focaltech driver
ARM: dts: msm: fix ipa smp2p node issue
ARM: dts: msm: Add the lahaina gpu dtsi
ARM: dts: msm: update DPC properties for Lahaina
ARM: dts: msm: Change the audio routing sequence
ARM: dts: msm: add documentation qcom,tx-wrapper-cache-max-size
ARM: dts: msm: add qcom,tx-wrapper-cache-max-size property
ARM: dts: msm: Add the offlineable memory sizes for Lahaina
ARM: dts: msm: Update audio device tree overlay for lahaina
ARM: dts: msm: Add turing etm support for Lahaina
ARM: dts: qcom: Remove UFS PHY reset control on Lahaina
ARM: dts: msm: add pinctrl information for Lahaina target
bindings: Documentation: Add wsa883x device tree documentation
dt-bindings: regulator: pm8008-regulator: add OCP interrupt support
ARM: dts: msm: Move apps_rsc before interconnect devices
ARM: dts: msm: Set USB mode as peripheral only on Lahaina
bindings: add audio device tree for lahaina
bindings: Documentation: add QTI audio documentation
ARM: dts: msm: Add USB Uni PHY related device node on Lahaina
ARM: dts: msm: Update and enable the debug cc measure nodes
ARM: dts: msm: Add QTI crypto device-tree node for Lahaina
bindings: Add device-tree bindings for QTI crypto drivers
dt-bindings: input: Add dt bindings for STMicro
ARM: dts: qcom: Add dtsi node entry for Slimbus in lahaina
ARM: dts: msm: use clock driver to vote for IPA code
ARM: dts: msm: Add ACTLR settings for the APPS and GFX SMMUs
dt-bindings: nfc: Add Documentation for I2C NFC devicetree node
ARM: dts: msm: Fix GSI IRQ type warnings on lahaina
dt-bindings: thermal: Add ADC_TM documentation for PMIC7
ARM: dts: msm: Add TSENS node support for lahaina
ARM: dts: msm: Add jtagmm device node for lahaina
ARM: dts: msm: Add initial device tree for Lahaina QRD Module
ARM: dts: msm: update port number to hex format
ARM: dts: msm: Add qseecom node for Lahaina
ARM: dts: msm: Enable s1 in fastmap for QUPv3 drivers on lahaina
ARM: dts: msm: Add 2-wire UART node for lahaina
ARM: dts: msm: Add cpufreq-hw node for Lahaina
dt-bindings: ufs: Add compitable string for V4 UFS PHY on Lahaina
ARM: dts: msm: add reset support for UFS on Lahaina
ARM: dts: msm: Add pshold to Lahaina
dt-bindings: qti-tri-led: Update reg definition
dt-bindings: pwm-qti-lpg: Update reg definition
ARM: dts: qcom: add dt entry needed for avb
dt-bindings: android: add entries for android
ARM: dts: msm: Enable QRNG driver for lahaina
dt-bindings: cpufreq: Add msm-cpufreq bindings snapshot
dt-bindings: Add USB audio QMI driver bindings
ARM: dts: msm: Add SPS driver node for Lahaina
ARM: dts: msm: Add etm save/restore for Lahaina
dt-bindings: rng: Add DT binding entry for msm-rng
ARM: dts: msm: Disable usb1 on Lahaina RUMI
ARM: dts: msm: Add EUD node for Lahaina
ARM: dts: msm: Add device tree overlay support for Lahaina
ARM: dts: msm: add documentation tx-napi
dt-bindings: slim-msm-ngd: Add dt bindings for slimbus driver
dt-bindings: nfc: Add Documentation for I3C NFC devicetree node
ARM: dts: msm: Add coresight device tree for Lahaina
dt-bindings: devfreq: add support for L3 voting in devfreq_icc
dt-bindings: devfreq: add support for shared core-dev tables
dt-bindings: iio: adc: Add PMIC7 VADC bindings
ARM: dts: msm: add volume up gpio-keys device for Lahaina boards
ARM: dts: msm: add PMK8350 PON_PBS and PON_HLOS devices
dt-bindings: input: add qpnp-power-on bindings
ARM: dts: msm: add SPMI debug bus for Lahaina boards
ARM: dts: msm: add PMIC devices for Lahaina
ARM: dts: msm: Specify clock-output-names for sleep_clk on Lahaina
ARM: dts: qcom: Add QUP ICC Core2x path IDs for QUPv3 node
ARM: dts: msm: add initial PCIe nodes for lahaina
dt-bindings: arm: msm: remove msm-bus and add ICC for PCIe
dt-bindings: arm: msm: add initial devicetree documenation for MSI
dt-bindings: arm: msm: add initial devicetree documentation for PCIe
dt-bindings: clocks: Add debugcc clock bindings for Lahaina
dt-bindings: pinctrl: qcom-pmic-gpio: add PMR735A and PMR735B bindings
dt-bindings: rtc: rtc-pm8xxx: Add binding documentation for pmk8350 rtc
ARM: dts: msm: add SPMI PMIC arbiter device for Lahaina
ARM: dts: msm: Add L3 devfreq devices for Lahaina
ARM: dts: msm: Update SIDs for test devices
dt-bindings: cpufreq: Add cpufreq firmware bindings
ARM: dts: msm: add spss_utils to lahaina
ARM: dts: msm: enable ipa smp2p
ARM: dts: msm: Update the smem size for Lahaina
ARM: dts: msm: Add limit rate on G4 for Lahaina rumi
ARM: dts: msm: Add ufs bus voting details for Lahaina
ARM: dts: qcom: Add spcom to support SPU on lahaina
ARM: dts: msm: Add ion heap for Secure Processor on lahaina
ARM: dts: msm: Add interconnect l3 epss devices for Lahaina
ARM: dts: msm: Configure SMMU in bypass mode for Lahaina RUMI
ARM: dts: msm: Add LLCC and DDR devfreq devices for Lahaina
dt-bindings: interconnect: add EPSS L3 bindings
ARM: dts: msm: Add QUPv3 SE and GPI DT node for lahaina
dt-bindings: Add dt bindings for jtagv8 driver
dt-bindings: qti-tri-led: Add bindings
dt-bindings: pwm-qti-lpg: Add bindings
dt-bindings: Add snapshot of thermal devicetree bindings
ARM: dts: msm: enable rmtfs for Lahaina
dt-bindings: Add device-tree bindings for EUD driver
ARM: dts: msm: Update Lahaina's memory map to V3
dt-bindings: devfreq: add support for memory latency QoS voting
dt-bindings: devfreq: add support for new memlat design
dt-bindings: devfreq: add support for different ddr types
dt-bindings: kgsl: Add device tree bindings for the KGSL GPU driver
dt-bindings: perf: Add DT bindings for LLCC_PMU_VER2 driver
dt-bindings: perf: Add DT bindings for QCOM LLCC PMU driver
dt-bindings: devfreq: Add DT bindings to support OPP BW values
dt-bindings: Add DT bindings to support compute bound logic
ARM: dts: msm: Add vdd_cx-supply node to gcc on Lahaina
dt-bindings: clocks: Update gcc clock bindings for Lahaina
ARM: dts: msm: Add vdd_mx-supply node to gpu cc on Lahaina
dt-bindings: clocks: Update gpucc clock bindings for Lahaina
bindings: Add device-tree bindings for qseecom driver
ARM: dts: msm: Add tz_log node for Lahaina
bindings: Add device-tree bindings for tz_log driver
dt-bindings: devfreq: Add DT bindings to add a stall cycle count event
dt-bindings: Add DT bindings for specifying the count factor
dt-bindings: devfreq: Make the freq-table property optional
dt-bindings: devfreq: Add DT bindings to configure byte MID match
ARM: dts: msm: Add smcinvoke node for Lahaina
bindings: Add device-tree bindings for smcinvoke driver
ARM: dts: msm: add lan-rx-napi property
ARM: dts: msm: add PIL spss node to lahaina
dt-bindings: Add camera devicetree bindings for lahaina
ARM: dts: msm: remove SPI config property
ARM: dts: msm: Update USB interrupt trigger types on Lahaina
ARM: dts: msm: Enable dcc on lahaina
ARM: dts: msm: update clock_rpmh device node for Lahaina
dt-bindings: clock: Add rpmh clock bindings for Lahaina
dt-bindings: add devicetree binding for fsa4480
ARM: dts: msm: Add USB PHY devices and related resources on Lahaina
bindings: add support for qcom,ucsi-glink
dt-bindings: devfreq: Add dt-bindings for BWMON HW version 5
dt-bindings: devfreq: Add DT bindings for ARM memlat driver
dt-bindings: devfreq: Add support for BWMON HW version 4
dt-bindings: devfreq: Add dt-bindings for BWMON HW version 3
dt-bindings: devfreq: Add the dt bindings for clock prepare
dt-bindings: devfreq: Add DT bindings for devfreq_simple device
dt-bindings: devfreq: Add dt-bindings for BWMON HW version 2
dt-bindings: devfreq: Add DT bindings for bimc bwmon driver
dt-bindings: devfreq: Add DT bindings for devfreq_icc device
ARM: dts: msm: IPA msm bus dtsi update for Lahaina
dt-bindings: i3c-master-qcom-geni: Add DT bindings for I3C GENI driver
ARM: dts: msm: Update and enable clk-aop clks on Lahaina
ARM: dts: qcom: add virt_clk interconnect provider
dt-bindings: interconnect: Add clk_virt documentation on Lahaina
ARM: dts: msm: Add USB BAM device node on Lahaina
ARM: dts: msm: Add support for modem PIL
ARM: dts: msm: Add SCM node
dt-bindings: regulator: add proxy consumer bindings
dt-bindings: pmic-glink: add qcom,pmic-glink-channel property
ARM: dts: msm: Add GDSC regulator references for Lahaina's SMMUs
bindings: add support for qcom,pmic-glink
ARM: dts: msm: Add SSC based sensors with SLPI PIL on Lahaina
ARM: dts: msm: Add modem smp2p for Lahaina
ARM: dts: msm: Document kona device binding
ARM: dts: msm: Add ARM PMU node for Lahaina
dt-bindings: spi-msm-geni: Add DT bindings for SPI GENI driver
ARM: dts: msm: Add CVP device tree for Lahaina
ARM: dts: msm: add reset control support for UFS PHY on Lahaina
ARM: dts: msm: Add embedded UFS device reset GPIO on Lahaina
dt-bindings: nvmem: add bindings for QTI SDAM devices
dt-bindings: soc: qcom: add bindings for QTI PBS devices
dt-bindings: platform: msm: add bindings for qpnp-revid devices
dt-bindings: spmi: spmi-pmic-arb-debug: add clock management support
dt-bindings: spmi: add SPMI PMIC arbiter debug bus bindings
dt-bindings: mfd: add qcom-i2c-pmic bindings
ARM: dts: msm: Add Lahaina video configuration
dt-bindings: pinctrl: qcom-pmic-gpio: add PM*8350* bindings
dt-bindings: mfd: qcom,spmi-pmic: add documentation for qcom,can-sleep
dt-bindings: gpi: Add DT bindings for GPI dmaengine driver
ARM: dts: msm: Update and enable graphics clock controller on Lahaina
dt-bindings: clocks: Add gpu cc clock controller bindings for Lahaina
ARM: dts: msm: Add IPA dtsi entry for Lahaina
dt-bindings: i2c-msm-geni: Add DT bindings for I2C GENI driver
ARM: dts: msm: Add QUPV3 SE dt node for uart on Lahaina
dt-bindings: Add device-tree bindings for slimbus slave driver
dt-bindings: usb: Document USB qcom,usb-charger property
ARM: dts: msm: add dt nodes for adsp & cdsp PIL for Lahaina
ARM: dts: msm: change lan_rx_napi to lan-rx-napi
bindings: usb_bam: Add USB BAM driver related documentation
ARM: dts: msm: Update bus entries in pil-video node
dt-bindings: media: Add video driver bindings for Lahaina
ARM: dts: msm: Update USB device nodes on Lahaina
dt-bindings: usb: Add bindings for MSM SSUSB
dt-bindings: usb: Document dwc3 xhci-imod-value property
ARM: dts: msm: add dt node for video
ARM: dts: msm: Add camera pinctrl info for Lahaina
bindings: Add USB PHY drivers related documentation
ARM: dts: msm: Add glink entries for Lahaina
ARM: dts: msm: Update and enable the cam cc node on Lahaina
dt-bindings: clocks: Add cam cc clock controller bindings for Lahaina
dt-bindings: Add snapshot for 5.4-rc2
ARM: dts: msm: add documentation lan_rx_napi
ARM: dts: msm: Enable the secure carveout heap on Lahaina
ARM: dts: msm: Unstub the DISP_CC node for Lahaina
dt-bindings: clk: Add DISP_CC clock driver bindings for Lahaina
ARM: dts: msm: Unstub the VIDEO_CC node for Lahaina
dt-bindings: clk: Add VIDEO_CC clock driver bindings for Lahaina
ARM: dts: msm: add initial device tree for Lahaina low power modes
ARM: dts: msm: Add glink entry for spss on Lahaina
ARM: dts: msm: Add shmbridge node for Lahaina
bindings: Add device-tree bindings for qtee_shmbridge driver
dt-bindings: Add spcom documentation
dt-bindings: Add spss_utils documentation
ARM: dts: msm: add wakeup parent for Lahaina
dt-bindings: arm: snapshot of psci bindings
dt-bindings: Introduce soc sleep stats bindings for QTI SoCs
dt-bindings: add device bindings for DDR stats node
dt-bindings: msm: add PM drivers device bindings
ARM: dts: qcom: add USB GDSC supplies for Lahaina
ARM: dts: qcom: switch PM8350 LDO 7 to RPMh control for Lahaina
ARM: dts: qcom: add GDSC devices for Lahaina
ARM: dts: qcom: add refgen regulator device for Lahaina
dt-bindings: regulator: add refgen regulator bindings
ARM: dts: qcom: switch to RPMh controlled PMIC regulators for Lahaina
ARM: dts: qcom: add PMIC PMR735A regulator devices for Lahaina
ARM: dts: msm: Add bcm voter devices for lahaina
dt-bindings: interconnect: Update QTI SDM845 DT bindings
dt-bindings: regulator: add rpmh-regulator bindings
ARM: dts: qcom: update PMIC regulator voltage limits for Lahaina
dt-bindings: of: irq: document properties for wakeup interrupt parent
dt-bindings: pdc: Add SPI config register
ARM: dts: msm: add capacity and DPC properties for Lahaina
ARM: dts: msm: Add WDT node for Lahaina
ARM: dts: msm: Update and enable the clock_gcc node on Lahaina
dt-bindings: clocks: add gcc clock controller bindings for Lahaina
dt-bindings: dma: sps: Add dt binding for SPS driver
dt-bindings: regulator: add PMIC PM8008 regulator bindings
ARM: dts: msm: remove uncessary node from IPA nodes for Lahaina SoC
ARM: dts: msm: Correct the UFS PHY address space for Lahaina
ARM: dts: msm: Use dt-bindings header for ION on Lahaina
ARM: dts: msm: Add smp2p sleepstate node for Lahaina
ARM: dts: msm: Add AOP QMP nodes for Lahaina
ARM: dts: msm: Update the timer clock frequence as per RUMI E3.0
dt-bindings: arm: Add CSR/TPDM/TPDA/TGU/Remote ETM support
ARM: dts: msm: add fastrpc and cdsp device nodes for lahaina
dt-bindings: Add device-tree bindings for Watchdog driver
ARM: dts: msm: add RSC device bindings for lahaina
ARM: dts: msm: add PDC device bindings for Lahaina
dt-bindings: Add documentation for the mem-offline driver
ARM: dts: msm: Add core hang detection to dt
bindings: Add qcom,msm-hang-detect schema
dt-bindings: arm: coresight: add trace unit power property
dt-bindings: Add dt bindings for memory dump
dt-bindings: Add dt bindings for dcc
dt-bindings: Add device-tree bindings for BT power driver
dt-bindings: regulator: gdsc-regulator: add property for register retention
dt-bindings: clk: gdsc-regulator: add parent supply property
dt-bindings: regulator: add gdsc-regulator bindings
dt-bindings: clock: add rpmh clock bindings for Kona
dt-bindings: clk: add AOP clock controller bindings
dt-bindings: qdsp: device-tree documentation for fastrpc and CDSP loader
dt-bindings: Add device-tree bindings for rtc6226 driver
ARM: dts: msm: Add IPA node for Lahaina SoC
bindings: serial: Binding for serial UART driver
bindings: qcom-geni-se: Common GENI driver
dt-bindings: Add snapshot for 5.3-rc4
dt-bindings: qdsp: Device tree documentation for sensors ssc
ARM: dts: msm: Add initial ION heaps for Lahaina
ARM: dts: msm: Make the CDSP secure carveout mappable on Lahaina
ARM: dts: msm: add msm_rtb tracing
bindings: Add qcom,msm-rtb schema
ARM: dts: msm: Add USB device nodes for Lahaina
ARM: dts: msm: Add HWSPINLOCK, SMEM and SMP2P for Lahaina
ARM: dts: msm: Disable the coherent KGSL IOMMU test device
ARM: dts: msm: Fix major and minor versions for Lahaina boards
dt-bindings: net: qrtr: Add FIFO transport bindings
dt-bindings: arm: msm: Add sleepstate-smp2p bindings
dt-bindings: arm: msm: Introduce qsee_ipc_irq_bridge bindings
dt-bindings: arm: msm: Introduce qcom,qsee_irq bindings
dt-bindings: soc: qcom: Introduce Glink Pkt bindings
dt-bindings: soc: qcom: Introduce Glink Probe bindings
ARM: dts: msm: Add device-tree entry for IMEM
ARM: dts: msm: Add support for SCM PAS
dt-bindings: Add device-tree bindings for IMEM
bindings: Add device-tree bindings for secure PIL driver
dt-bindings: Introduce QMP debugfs client bindings
dt-bindings: mailbox: Introduce MSM_QMP bindings
dt-bindings: kryo-edac: add kryo edac bindings
ARM: dts: msm: Add edac node for Lahaina SoC
ARM: dts: msm: Enable the graphics SMMU on Lahaina
dt-bindings: Add device-tree bindings for CNSS2 driver
ARM: dts: msm: Add IPCC test nodes for end to end verification
ARM: dts: msm: Add IPCC node for Lahaina
dt-bindings: Add device-tree bindings for IPCC driver
ARM: dts: msm: Make LLCC node compatible with "qcom,lahaina-llcc"
dt-bindings: LLCC: Add "qcom,lahaina-llcc" compatible property
dt-bindings: Add device-tree bindings for the ION memory manager
ARM: dts: msm: Add the SMMU devices for Lahaina
ARM: dts: msm: Add the secure buffer device for Lahaina
dt-bindings: Merge all IOMMU documentation from msm-4.19 to msm-lahaina
ARM: dts: msm: Add device-tree node for LLCC driver
dt-bindings: LLCC: Add "qcom,llcc-v2" compatible property
ARM: dts: msm: add ufs device support for Lahaina
ARM: dts: msm: add stub interconnect devices for Lahaina
bindings: usb: Add bindings for USB PHY on QTI emulation platform
ARM: dts: msm: Add SCM node for Lahaina SoC
bindings: Add device-tree bindings for SCM driver
ARM: dts: msm: Add memory carveouts as per Lahaina v2 memory map
dt-bindings: interconnect: add interconnect bindings
dt-bindings: Add snapshot from tmp-f686d9f
ARM: dts: msm: Add pinctrl node for TLMM on Lahaina SoC
bindings: pinctrl: Add device-tree bindings for Lahaina pinctrl driver
ARM: dts: msm: add stub clock devices for Lahaina
dt-bindings: clocks: add dummycc bindings
bindings: Add snapshot of bindings with GPL-2.0 or BSD-2-Clause license
ARM: dts: msm: add stub regulator devices for Lahaina
dt-bindings: regulator: add stub regulator bindings
ARM: dts: msm: Add initial device tree for Lahaina
dt-bindings: msm: Add compatible strings for Lahaina
dt-bindings: Snapshot of msm device tree binding document
ARM: dts: vendor: Add an initial Makefile to the vendor
dt-bindings: Add devicetree bindings to devicetree project
Initial empty repository
Change-Id: Icb722bcaa651702f1843582ae7f1bd9807681018
2020-05-08 12:56:50 -07:00
Venkata Narendra Kumar Gutta
b0e5152a74
dt-bindings: Add devicetree bindings to devicetree project
...
Add devicetree bindings snapshot to the devicetree project.
This snapshot is taken as of the
'commit 5fba1b18cfc72e264e5f3ce49020ed322aa6ac9f ("Merge 5.6-rc3
into android-mainline")' of the kernel project.
Change-Id: Ia087ab2b7d4a2616ea446a69683a8b5b821d0448
2020-05-07 20:43:53 -07:00
Shyam Kumar Thella
3a8cbb10af
bindings: qti-flash: Fix slave id for pm8350c in DT example
...
Correct pm8350c slave ID in DT example for flash led device.
Change-Id: Ie2cc2f3b10802470a9507bc0d2821b2106f4a1b3
2020-01-28 17:12:52 +05:30
qctecmdr
8e166c620f
Merge "dt-bindings: add documentation for leds-qti-flash"
2020-01-27 13:53:29 -08:00
Shyam Kumar Thella
4215d492b0
dt-bindings: add documentation for leds-qti-flash
...
Flash LED driver provides support for the clients to turn ON/OFF LED
channels in different modes (flash/torch) individually or as a group.
Add the bindings necessary to describe it.
Change-Id: Id9eebbeaef5933477bc3dc5db8d674cab059e5d0
2020-01-17 10:11:01 +05:30
Guru Das Srinagesh
80cacdcd3c
dt-bindings: qti-tri-led: Update reg definition
...
Commit f6ea1a1997
2019-12-18 11:47:46 -08:00
Guru Das Srinagesh
5e07fdf248
dt-bindings: qti-tri-led: Add bindings
...
Add snapshot of the devicetree bindings for the leds-qti-tri-led driver
as of msm-4.19 'commit 00392c21d13b ("Merge "ARM: dts: msm: add VRR
resolutions for qsync panel on lito"")'.
Change-Id: I65774d4b361a43a736c692c12cdfcd8bf8d4b7ea
2019-12-06 13:06:51 -08:00
Raghavendra Rao Ananta
e4b1dcc77e
dt-bindings: Add snapshot for 5.4-rc2
...
Add the device-tree bindings' snapshot from tmp-abe0ec5a8133 for
5.4-rc2.
Change-Id: I346809db756dd18a509ce440499d98a7fefecd16
2019-10-16 10:18:01 -07:00
Raghavendra Rao Ananta
430b7fac16
dt-bindings: Add snapshot for 5.3-rc4
...
Add the device-tree bindings' snapshot from tmp-9855ec2fd422 for
5.3-rc4.
Change-Id: I25b0ac9b29c0347f557b87094ede86370a89a0f2
2019-08-22 23:08:38 -07:00
Raghavendra Rao Ananta
77ef8a5391
bindings: Add snapshot of bindings with GPL-2.0 or BSD-2-Clause license
...
Add snapshot of the device-tree bindings' YAML files that has
GPL-2.0 or BSD-2-Clause license. The snapshot is taken from
Android Common Kernel's android-mainline branch as of commit-id
<b41e0f1228c15d6> (ANDROID: update abi_gki_aarch64.xml for 5.2-rc5).
Change-Id: I03c75ed9aeec161dac792e18f5ab991a94de6dce
2019-06-18 18:06:29 -07:00
Murali Nalajala
719cc9aa79
dt-bindings: Add devicetree bindings to devicetree project
...
Add devicetree bindings snapshot to the devicetree project
Change-Id: I20b46d194bd3b107ddcb3e35283e6dafa27adec1
2019-05-31 16:45:27 -07:00
