diff --git a/radio/1.3/Android.bp b/radio/1.3/Android.bp
index 9424a85756..6a9b1d05c8 100644
--- a/radio/1.3/Android.bp
+++ b/radio/1.3/Android.bp
@@ -20,6 +20,7 @@ hidl_interface {
     ],
     types: [
         "AccessNetwork",
+        "DataProfileInfo",
         "DataRegStateResult",
         "EmergencyNumber",
         "EmergencyNumberSource",
diff --git a/radio/1.3/IRadio.hal b/radio/1.3/IRadio.hal
index 2b14488f3e..dde9d719ab 100644
--- a/radio/1.3/IRadio.hal
+++ b/radio/1.3/IRadio.hal
@@ -16,7 +16,7 @@
 
 package android.hardware.radio@1.3;
 
-import @1.0::DataProfileInfo;
+import @1.3::DataProfileInfo;
 import @1.0::Dial;
 import @1.2::DataRequestReason;
 import @1.2::IRadio;
@@ -56,13 +56,7 @@ interface IRadio extends @1.2::IRadio {
      * @param accessNetwork The access network to setup the data call. If the data connection cannot
      *     be established on the specified access network, the setup request must be failed.
      * @param dataProfileInfo Data profile info.
-     * @param modemCognitive Indicates that the requested profile has previously been provided via
-     *     setDataProfile().
      * @param roamingAllowed Indicates whether or not data roaming is allowed by the user.
-     * @param isRoaming Indicates whether or not the framework has requested this setupDataCall for
-     *     a roaming network. The 'protocol' parameter in the old RIL API must be filled
-     *     accordingly based on the roaming condition. Note this is for backward compatibility with
-     *     the old radio modem. The modem must not use this param for any other reason.
      * @param reason The request reason. Must be DataRequestReason.NORMAL or
      *     DataRequestReason.HANDOVER.
      * @param addresses If the reason is DataRequestReason.HANDOVER, this indicates the list of link
@@ -82,8 +76,28 @@ interface IRadio extends @1.2::IRadio {
      * Note this API is same as 1.2 version except using the 1.3 AccessNetwork as the input param.
      */
     oneway setupDataCall_1_3(int32_t serial, AccessNetwork accessNetwork,
-            DataProfileInfo dataProfileInfo, bool modemCognitive, bool roamingAllowed,
-            bool isRoaming, DataRequestReason reason, vec<string> addresses, vec<string> dnses);
+            DataProfileInfo dataProfileInfo, bool roamingAllowed,
+            DataRequestReason reason, vec<string> addresses, vec<string> dnses);
+
+    /**
+     * Set an apn to initial attach network
+     *
+     * @param serial Serial number of request.
+     * @param dataProfileInfo data profile containing APN settings
+     *
+     * Response callback is IRadioResponse.setInitialAttachApnResponse()
+     */
+    oneway setInitialAttachApn_1_3(int32_t serial, DataProfileInfo dataProfileInfo);
+
+    /**
+     * Send data profiles of the current carrier to the modem.
+     *
+     * @param serial Serial number of request.
+     * @param profiles Array of DataProfile to set.
+     *
+     * Response callback is IRadioResponse.setDataProfileResponse()
+     */
+    oneway setDataProfile_1_3(int32_t serial, vec<DataProfileInfo> profiles);
 
     /**
      * Initiate emergency voice call, with zero or more emergency service category(s).
diff --git a/radio/1.3/types.hal b/radio/1.3/types.hal
index 09202a5cbb..a41f4b2d65 100644
--- a/radio/1.3/types.hal
+++ b/radio/1.3/types.hal
@@ -16,6 +16,11 @@
 
 package android.hardware.radio@1.3;
 
+import @1.0::ApnAuthType;
+import @1.0::ApnTypes;
+import @1.0::DataProfileId;
+import @1.0::DataProfileInfoType;
+import @1.0::RadioAccessFamily;
 import @1.0::RegState;
 import @1.2::AccessNetwork;
 import @1.2::CellIdentity;
@@ -160,3 +165,71 @@ struct DataRegStateResult {
         LteVopsInfo lteVopsInfo; // LTE network capability
     } vopsInfo;
 };
+
+/**
+ * Overwritten from @1.0::DataProfileInfo in order to deprecate 'mvnoType', 'mvnoMatchData',
+ * 'maxConnsTime', and 'maxConns'. In the future, this must be extended instead of overwritten.
+ * Added 'preferred' and 'persistent' in this version.
+ */
+struct DataProfileInfo {
+    /** id of the data profile */
+    DataProfileId profileId;
+
+    /** The APN name */
+    string apn;
+
+    /**
+     * One of the PDP_type values in TS 27.007 section 10.1.1. For example, "IP", "IPV6", "IPV4V6",
+     * or "PPP".
+     */
+    string protocol;
+
+    /**
+     * one of the PDP_type values in TS 27.007 section 10.1.1 used on roaming network. For example,
+     * "IP", "IPV6", "IPV4V6", or "PPP".
+     */
+    string roamingProtocol;
+
+    /** APN authentication type */
+    ApnAuthType authType;
+
+    /** The username for APN, or empty string */
+    string user;
+
+    /** The password for APN, or empty string */
+    string password;
+
+    /** Data profile technology type */
+    DataProfileInfoType type;
+
+    /**
+     * The required wait time in seconds after a successful UE initiated disconnect of a given PDN
+     * connection before the device can send a new PDN connection request for that given PDN.
+     */
+    int32_t waitTime;
+
+    /** True to enable the profile, false to disable */
+    bool enabled;
+
+    /** Supported APN types bitmap. See ApnTypes for the value of each bit. */
+    bitfield<ApnTypes> supportedApnTypesBitmap;
+
+    /** The bearer bitmap. See RadioAccessFamily for the value of each bit. */
+    bitfield<RadioAccessFamily> bearerBitmap;
+
+    /** Maximum transmission unit (MTU) size in bytes */
+    int32_t mtu;
+
+    /**
+     * True if this data profile was used to bring up the last default (i.e internet) data
+     * connection successfully.
+     */
+    bool preferred;
+
+    /**
+     * If true, modem must persist this data profile and profileId must not be
+     * set to DataProfileId.INVALID. If the same data profile exists, this data profile must
+     * overwrite it.
+     */
+    bool persistent;
+};