External camera@3.5 supports the new buffer management
API that allows HAL to request buffer when needed to
optimize the memory usage.
Test: smoke test TestingCamera
Bug: 109829698
Change-Id: Icfbb75a26d8e92e4eb82a680e94e183041a5174d
Hal must be able to recommend efficient stream
configurations for common client use cases. Add the
necessary static metadata keys.
Bug: 64029608
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I0c2306501094383af78cb7ced1fa700b259d2b08
Also includes:
- Add test for getPhysicalCameraCharacteristics.
- Doc update for the new HIDL API.
- Tighten boundary check for camera ID in CameraModule.
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --module VtsHalCameraProviderV2_4Target -l INFO
Bug: 79523700
Bug: 115969176
Bug: 116512585
Change-Id: I051d1b0c91834781a1f8d893ed5ebfa579b03774
Verify that device implementations do not set the
new privacy characteristics key:
ANDROID_REQUEST_CHARACTERISTIC_KEYS_NEEDING_PERMISSION
As required by API contract.
Bug: 112160024
Bug: 115969437
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I8d8f0d0e1cdec24117d47e7ae45602f56573376f
- Add version 3.5 for ICameraDevice for physical camera characteristics
query.
- Add version 3.5 for ICameraDeviceSession to work around HIDL
versioning bug.
Test: Camera CTS
Bug: 79523700
Change-Id: I8df6cdd4ee6ac5755758510c0dc1ea1cec31aa73
The advertised ISO ranges may not be entirely supported on
some devices. Expect a 3% tolerance when comparing the applied
results versus the expected ISO value.
Bug: 80025874
Test: run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Merged-In: Ibd2758e48a0924e81877e35dd27433669274fdb3
Change-Id: Ibd2758e48a0924e81877e35dd27433669274fdb3
(cherry picked from commit 0fdd7cdc0e)
Claim torch API support though there is no device
actually has a flash unit. This is to workaround
an issue in camera service where it falls back
to legacy camera HAL1 control if the device does
not report torch API support (and external camera
HAL does not implement HAL1)
Test: CtsVerifier FlashLight test
Bug: 113336515
Change-Id: I945b35fecfed3b2698b1e9bb1d8faad8699258d2
After flushing the camera requests don't try to close the
camera session while still holding 'mLock'. Different Hals
could still try and return additional results which then will
get blocked on 'mLock'. Closing the session could potentially
introduce a deadlock if the Hal implementation waits for any
of the result calls to return.
Bug: 111836165
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I0f309f435cc76db3f9b6ba500da65a232b014717
Merged-In: I0f309f435cc76db3f9b6ba500da65a232b014717
(cherry picked from commit 8e92056837)
Per API specification "physicalCameraId" must not
contain any logical camera ids. The test case
should only use the physical ids it receives from the
camera static metadata.
Bug:109874630
Test:run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I82c5bf44f4572b3a6abdbb3101a11140907b1c9e
Added a secondary Camera Provider for 64bit HALs
Test: GCA and normal camera usecases, CTS
Bug: 73173997
Change-Id: I2d9b9a916edc71b73086375f541368b080f5eca9
Vendor-specific property should have "vendor." prefix.
Bug: 36513925
Test: succeeded building and tested with taimen
Change-Id: I80f17fb6b8017a761122ddd2f8863e63c72e5623
Camera graphic buffers should always be allocated using the
respective HIDL API.
Bug: 77681294
Test: run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: Ibef88548fc3d29df606e4f66f5f3f4e89d3bf654
Camera provider types should not be limited to a particular set
of pre-defined values. All providers will be treated equally
by camera framework regardless of their specific type.
Bug: 73738052
Test: run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I379c015d9e2fc4f68a7ad3ae7cd92b9d230dea33
1. Add EXIF MAKE/MODEL tag
2. Add retry loop for V4L2 open failure
3. Do not add external camera if ExternalCameraDevice cannot be
initialized
Bug: 72261912
Bug: 72569850
Change-Id: I06df1fbbb4afabea1a9a74aca9e288b24966cb0b
Also remove the length check for getCameraIdList as external
camera providers are supposed to report 0 there.
Test: atest VtsHalCameraProviderV2_4Target (on marlin)
Bug: 69473913
Change-Id: I9059a699a6c46a3aac76454e7e8673d2539d0fa1
A test is needed which will generate a burst request
that contains alternating sensor sensitiviry values.
The corresponding results need to be verified accordingly.
Bug: 37533777
Test: run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I58ccb645b83c48ba3360aae5ad44036ce213964d
Empty individual physical settings should be allowed after
one initial successful request.
Bug: 72524845
Test: run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I18d22a56f5f0e6e1d81a6e8c844697c02bc343a1
Individual physical camera requests should only be allowed
in case the respective physical Ids are among the last
configured Hal streams.
Bug: 72524603
Test: run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: Ia5715398f74f03528d7fe2e52e5b9e32ad654a2c
Add camera removal support to CameraProvider and CameraModule.
Change-Id: I047e486d1665ba9e0b1455f77a7bbbb5e0d66653
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com>
Multi-camera devices should be able to accept and process
individual settings for all physical sensors backing the
logical camera. 'CaptureRequest' must be extended to hold
these additional physical camera settings.
Test: Manual using camera application,
camera_client_test,
run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Bug: 64691172
Change-Id: Ia38d1e7681a9385be7578c11e40f4e35e9101d75
- Add physical cameraId field in stream structure.
- Override processCaptureRequest due to physicalCameraId change.
- Update 3.3 metadata with logical camera characteristics.
Test: Camera CTS on Taimen, LogicalCamera CTS test on C1
Bug: 64691172
Change-Id: I65bd1ae38381ecb89fae439ae14b813c9bcc3248
To avoid glitches and unexpected behavior, session parameters
should be included in the stream configuration before invoking
capture requests.
Bug: 70560715
Test: run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: Id4ecd40533157f1a3299099a984ffab21654548a
