[Description]
when driver re-register hci device, it may register hci 1
[Root Cause]
In the kernel mechanism, there may be a timing issue. when driver re-register hci device,kernel may not completely unregister hci 0.But aidl only open hci 0.
[Solution]
assign a value to the hci interface based on the device node found by AIDL
[Test Report]
Insert the bt chip into the usb 2.0 port, and then suspend the TV. The bt chip will be disconnected due to the USB power outage. And then quickly resume the TV，check whether the Bluetooth state is on. Suspend and resume for several times, check for bt state.
Change-Id: I57fd4a22c956e0cf2b4a516247c258493163e51a
BUG: 314149416
setLowLatencyModeAllowed API is only used for A2DP offload session. For
this case, we shouldn't report ReportLowLatencyModeAllowedChanged
callback for the other session
Bug: 270987427
Test: atest VtsHalBluetoothAudioTargetTest
Change-Id: I1991ee93b3523717c6ca26b1638e34a196253a5b
[Description]
during servicefuzz test, when AIDL has already been closed, then send
packet will cause crash
[Root Cause]
send function doesn't check AIDL mstate and it may use illegal socket fd
[Solution]
add AIDL state check before send
[Test Report]
test bluetooth servcefuzz pass
Change-Id: Id10c72269a392562798a6e46e9753402db423ee3
Bug: 308904509
- with defaults user don't have to change their Android.bp when there is
a update
- update AIDL audio interfaces with android.media.audio.common.types
- update Spatialization and HeadTracking AIDL usage
Bug: 273373363
Bug: 293370815
Test: m
Test: lunch panther-trunk_staging-userdebug; m; test Bluetooth Audio
Change-Id: Ic9d8afc1d4e19e4243c66065b0a5d29156632851
Merged-In: Ic9d8afc1d4e19e4243c66065b0a5d29156632851
We should bring the capabilities from the configure file that the device
could have its own capabilties.
Bug: 302173270
Test: atest VtsHalBluetoothAudioTargetTest
Change-Id: I2cb5194acbe64d7d64cca9b245b26ca5fbac35d4
The benefit is small and it's painful to make libraries
available to apexes and the platform.
Bug: 296427840
Test: mma -j32
Change-Id: I7f2ed8636b90de415b8d5635dcd7c568810323bd
Move StopServicesSetup after RunCommandTargetPreparer in
VtsHalBluetoothV1_0TargetTest. RunCommandTargetPreparer requires
settings service, which is not available after StopServicesSetup.
Bug: 293822620
Test: run vts -m VtsHalBluetoothV1_0TargetTest and inspect logs to make
sure no preparer steps fail.
Change-Id: I935d19c5e941bfdb122554d8c413d3095fef27ac
LatencyMode is not updatable after audio session started.
Currently, if low latency is allowed, audio session should have
LOW_LATENCY latency mode.
Create a workaround to add LOW_LATENCY when low_latency_allowed_ set to
ture at ReportLowLatencyModeAllowedChanged.
Bug: 291760415
Bug: 294498919
Test: play low latency audio with supported headset and check
LOW_LATENCY mode can be selected
Change-Id: Ia324f0a368e47ae8b8056c190d8d1f4a2e09ecec
Add overloads for UpdateSink/SourceMetadata that
accept android.hardware.audio.common.Sink/SourceMetadata types.
Move include of hardware/audio.h to BluetoothAudioSession.cpp.
This allows to use this code from "pure AIDL" modules.
Bug: 228804498
Test: m
Change-Id: Ib0b8c6d1c7db9b846a508d6d4001f67feb2111c6
Make android.hardware.bluetooth.audio-V3 and
VtsHalBluetoothAudioTargetTest to depend on
android.hardware.audio.common-V2. This is needed so that
the audio HAL service can depend on
android.hardware.bluetooth.audio-V3.
Bug: 228804498
Test: m
Change-Id: Ic001e651de4cc6ef6920f1d6d80ab272c45aefe2
Merged-In: Ic001e651de4cc6ef6920f1d6d80ab272c45aefe2
This was done in ag/22462586 internally which is too large to
cherry-pick. It's being applied to aosp to unblock some trunk stable
work.
This CL is generated with:
`m android.hardware.bluetooth.audio-freeze-api`
Test: m
Bug: 290265210
Change-Id: Icfcea3d6971dd0b91cd320d9995b70bcb38a3750
Merged-In: I832ab7a8b5445ba85e27bbcf5be64906bfa0e5be
Bluetooth does not handle well conflicting message
Test: VtsHalBluetoothV1_0TargetTest
Test: VtsHalBluetoothV1_1TargetTest
Bug: 262645484
Bug: 262501652
Bug: 293822620
Change-Id: I0aca127fb5e5e33cc0086aaad19a8f1286fc83d6
(cherry picked from commit cd64ee13fb)
[Description]
If bt controller device is usb interface,
sco loopback single pkt and bandwidth test can not pass
because pkt size is limited accroding to core spec
[Root Cause]
USB sco packet size is limited in spec
[Solution]
If is bt usb chip, continuous receive sco packets
from controller until size is enough
[Test Report]
Test Pass
Bug: 286355871
Change-Id: Idb150d8a72149f7e1dfaccfd7bc82a91710da59c
This reverts commit 1adfae9364.
Reason for revert: Causes Sabrina/Boreal bt stacks to timeout on startup
Bug: 247053367
Change-Id: Ibef97f054510c826920bb30725fed168c755cc14
[Description]
If aidl open HCI fail at the first time, the aidl state
can not change to enable for the next time to initialize.
[Root Cause]
Bluetooth AIDL State is always equal to INITIALIZING after
open hci fail at the first time.
[Solution]
When open HCI fail at the first time, initialize the mstate to ready
Bug: 285517442
Test: pass
Change-Id: I19756d6602ba931242d0f95942db55c505a210bb
