Simplify the experience of implementing stream variants.
Stream class now exposes two interfaces: DriverInterface
and StreamCommonInterface, which represent the two
aspects of its usage: via the FMQ on the worker thread,
and via IStreamCommon Binder interface.
Input/output streams now inherit the concrete stream
variant, and implement interface methods specific for
IStreamIn and IStreamOut.
Added DriverInterface::shutdown method which is called
on the worker thread prior to the exit.
Bug: 282568751
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I5bf8da2f22b27f0e284a41fc30b920d87ac2936c
Plumb propagation of errors reported by the implementations
of DriverInterface::setConnectedDevices up to the Module.
This allows returning the reported errors from the corresponding
IModule interface methods. Implement handling of errors
from connection state update by the Module implementation.
When updating streams about the connection status
ensure that the list of connected devices is not empty.
Also, add an extra check to AudioStreamIn#ActiveMicrophones
to validate the size of the returned active microphones
list.
Bug: 282568751
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I62a422d95c37a672fce4ad221bea435cc7b4ebfa
Vendor implementations may need to see the value of flags
and the I/O handle of the mix port used to open the stream.
Bug: 282568751
Test: atest VtsHalAudioCoreTargetTest
Change-Id: If1f346793f3b3a725bc19358909f5b461cb159c1
Make interface methods protected so that subclasses can
augment them.
Provide getters for private fields.
Bug: 282568751
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I0e4810f8a4c816c4f673139816e9768f6dc8da7c
'DriverInterface::init' is called on the same thread as other
interface methods (the worker thread), except
for 'setConnectedDevices'. Update the comment to reflect this,
and rearrange the methods order in the interface.
Bug: 283463913
Test: m
Change-Id: I8937506d20ff8233b4b934c421173ce2bec9d43e
The main change is to convert the result of parsing from XSDC
types to AIDL, and add a VTS test for IConfig.getSurroundSoundConfig.
Extra changes:
- add 'Unchecked' suffix to conversion functions that do not
wrap the result into ConversionResult;
- enable more compile-time checks for the default AIDL service,
fix issues found.
Bug: 205884982
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Icf578b8d28647e6355ed5328599c77d2ca1234f9
Clarify what should happen to mix port profiles after
connection of an external device. Add a test to verify
this behavior.
Also, add an XML file for the test runner for
VtsHalAudioCoreTargetTest.
Bug: 273252382
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I3381dd29c5922bf31fa3a8ae6fa273597e8333a1
Merged-In: I3381dd29c5922bf31fa3a8ae6fa273597e8333a1
1. By default, the DriverUsb should be standby. When there is data
transfer request, it will exit standby.
2. Initialize alsa device profile before reading device info.
3. Open the alsa device proxy after the preparation succeed.
Bug: 266216550
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I1f0425036df176c52220320135079e7c98daa2d0
RS2 represents an interval of power levels. This is why it is clearer to
specify upper bound in the naming to make it clear that we refer to the
upper limit which when exceeded will trigger a momentary exposure.
Test: atest VtsHalAudioCoreTargetTest
Bug: 273961110
Change-Id: If4e065deeedb32c3e5e81caf4cd6924fb5815dc0
Merged-In: If4e065deeedb32c3e5e81caf4cd6924fb5815dc0
Since BT LE can also have offloaded codecs, it might need
a reconfiguration event similar to the one that BT A2DP
receives.
Bug: 272658632
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I04fb7c99f0457f87e1f4aaf7e77165317163387b
These utilities are for types generated from AIDL. Since
the types end up in the 'aidl' namespace (NDK backend), it makes
sense to keep the utilities in the same namespace.
While changing the namespace, I've found numerous useless
includes of 'Utils.h' and removing them, also reorganizing
lists of includes along the way to match the style guide.
Bug: 205884982
Test: m
Test: atest --test-mapping hardware/interfaces/audio/aidl/TEST_MAPPING
Change-Id: Ib23b47092364046f632f9503b92b9baff5b902f5
Similar to IBluetooth and IBluetoothA2dp interfaces,
IBluetoothLe controls the LE profile. This interface
replaces the following string parameter:
"LeAudioSuspended"
Bug: 270731693
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I9df28053cd270fc2d446ba9a8ada4dd6ab761c7b
Merged-In: I9df28053cd270fc2d446ba9a8ada4dd6ab761c7b
This method is needed to implement HAL modules that
are proxies for other subsystems, for example
the "bluetooth" and "r_submix" modules. This method
replaces string parameters "exiting=1" and "closing=true"
which the framework sends to streams prior to closing
them in order to unblock the I/O thread of the stream.
Bug: 270731693
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I3d13fe34535ab853c9f8237a08c31cdafadbb390
Merged-In: I3d13fe34535ab853c9f8237a08c31cdafadbb390
1. Increase the minimum buffer size to 256 frames. This is
more realistic than 16 frames: 256 frames is ~5ms @ 48 kHz.
2. Make transfer delay in the stub module dependent on the frame
count for synchronous transfers.
Bug: 270154517
Test: atest VtsHalAudioCoreTargetTest
Test: atest android.media.audio.cts.LoudnessEnhancerTest (w/AIDL enabled)
Change-Id: If968e30d145b52220f4dc3c33af48dbc163c78cd
Use mixer control to support master mute, master volume and hardware
volume for USB audio HAL.
Bug: 266216550
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Iad544ba517cbfc778ebdf96dd161944886383b73
Similar to IBluetooth interface which controls SCO/HFP,
IBluetoothA2dp controls the A2DP profile. This interface
replaces the following string parameters:
AUDIO_PARAMETER_A2DP_RECONFIG_SUPPORTED
AUDIO_PARAMETER_RECONFIG_A2DP
"A2dpSuspended"
Also, refactor fields used by Module implementation
for persistent child interfaces.
Bug: 270731693
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ie62952c3bc3af2f53535d716e5b57bf48c661306
Merged-In: Ie62952c3bc3af2f53535d716e5b57bf48c661306
AudioOffloadMetadata contains the same information
as 'AUDIO_OFFLOAD_CODEC_*' framework parameters.
It is updated via a new method IStreamOut.updateOffloadMetadata
which only works for compressed offload streams.
Bug: 270731693
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I6c8a8853f216438284082f79e3f57e511a2a1f06
Merged-In: I6c8a8853f216438284082f79e3f57e511a2a1f06
These parcelables are also used by the framework.
Bug: 263964254
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ib30b69c325040e474fb58a8e7e515912fccab4c7
Merged-In: Ib30b69c325040e474fb58a8e7e515912fccab4c7
To avoid the case of receive thread stop right before process, in this
case test case AudioEffectTest#ConsumeDataAfterRestart will fail.
Bug: 264618800
Test: atest VtsHalAudioEffectTargetTest
Change-Id: I3c00361a537bc7010e6cd138f637f68b963e8033
They will be dlopen so no need to add the shared_lib dependency.
But we need to add them as PRODUCT_PACKAGES in base_vendor.mk
Bug: 258124419
Test: build and boot cuttlefish, change effect lib path in Android.bp
and audio_effects_config.xml and bootup.
Change-Id: Ia3b9bef9b5ed86921d80adcc0ce2296f50939370
Add new API to fetch IO handle which is
used for offloaded effects.
Test: atest VtsHalAudioEffectFactoryTargetTest
Test: atest VtsHalAudioEffectTargetTest
Change-Id: I82abe76036507e770f0e2aed2feef7905d85a5c9
Add interfaces to query aaudio hardware information. The new interfaces
are supposed to replace the system properties. The information includes
aaudio mixer burst count and aaudio hardware burst minimum usec.
Bug: 193275465
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Id3442dae15937baba84f053f2e244bc294f4d718
Add API to query if the Module supports control of variable latency over
playback paths.
Bug: 197823000
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I3a08d682a1a639d8373869725e12702fff962d53
I missed that there is already android.media.audio.common.AudioMode.
However, due to use by the framework, it contains more values
(all of them are SYS_RESERVED), thus the implementation and VTS
have to be updated as well.
Bug: 205884982
Test: atest VtsHalAudioCoreTargetTest
Change-Id: If260413b1f774a69514de978792d5ad2eb46481a
Merged-In: If260413b1f774a69514de978792d5ad2eb46481a
This allows for more code reuse and composability when
implementing streams for a particular audio "backend."
The existing "stub" code has been moved to StreamStub* files.
Bug: 264712385
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I97fd41f87eb6d01e1d57f0d70a86d3b2b3555837
The plumbing was missing from the CL which has added
the callback (aosp/2256190).
Bug: 205884982
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Iab3c970b3efd0281e34e07f98864531acc4c519e
