The default implementation of the primary HAL is intended to
work with the AVD. Current implementation of virtualized audio
I/O on AVD falls behind actual hardware in terms of I/O timing.
This is not tolerated by CTS tests which are tailored for
real hardware.
Make the primary HAL implementation more resilient to irregular
ALSA read/write behavior on AVD by prolonging I/O time, or
skipping operations when falling behind expected time.
Bug: 302132812
Bug: 302587331
Test: atest CtsMediaAudioTestCases
Change-Id: Ia290d9541a8a0e22d28024f7930ef554396d63c6
The VTS test for volume accessors first determines whether
the accessor is supported by calling the getter. The getter
must return `UNSUPPORTED_OPERATION` if the control is not
supported. For this reason, wire the getter to the hardware
mixer implementation.
Bug: 302132812
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ia50def0d076b6d3c46db55123186eab34bbbb954
The latency figure depends on the module implementation.
Instead of using a hardcoded value, each module should be
able to specify its own value. This value is then used
for calculating the minimum buffer size.
Set the nominal latency of the primary (CF) module to a high
value since the virtual device implementation fails CTS tests
if it attempts to pretend that it provides low latency.
Bug: 302132812
Test: atest CtsMediaAudioTestCases --test-filter=".*AudioTrackTest.*"
Test: atest CtsMediaAudioTestCases --test-filter=".*AudioRecordTest.*"
Change-Id: I8ce9f230378eea787c9b3c7ce3660c1e4e7bc895
** Partial upstream of ag/24854732. Only the interface part is
** included.
This should enable the sound dose gts on cuttlefish devices. The sound
dose HAL uses the internal MelProcessor to compute the MELs which are
reported to the framework.
Test: atest GtsAudioTestCases:SoundDoseTest
Bug: 301527435
Change-Id: Ifc505a0171bc8b4d3f5cf65d950fa5c0f812087f
Merged-In: Ifc505a0171bc8b4d3f5cf65d950fa5c0f812087f
Core HAL changes:
1. Add StreamPrimary implemented via StreamAlsa.
2. Align the configuration with the HIDL HAL.
3. Fix position retrieval vs. standby call.
4. Fix sleeps in StreamAlsa.
VTS changes:
1. Use several bursts for stream I/O test scenarios that check
observable position increase. This is because the position may
not be available until a couple of transfers have been made.
2. Do not require position increase for the scenarios that do
not make several bursts. As specified above, the position may
not have been increased for the ALSA case. Whereas, using
multiple bursts in all scenarios will increase test time, and
make the state machine transitions graph more complicated.
3. Hook up the test config file to shut down audioserver during
VTS tests, fix the test config file.
Bug: 286914845
Test: atest VtsHalAudioCoreTargetTest
Test: compare APM dumps for AIDL vs. HIDL
Change-Id: I85271564c664fa40008d60e82b32eaa66a99c68f
