C++20 will require members in a designated initializer to be in order
unlike C99.
Bug: 139945549
Test: mm
Change-Id: Ifdccde48c47c0495467f438002caf91cfdbd8091
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Since these were combined into libhidlbase.
Bug: 135686713
Test: build only (libhwbinder/libhidltransport are empty)
Change-Id: I075670b64eebbbbd6a6ae0e84ad51bf1c6f5ba36
Automatic mk -> bp conversion for all modules here
which can be converted and built automatically.
Test: Soong resolves all dependencies
Bug: 37512442
Change-Id: Ib789212cb88d55731397c600d132e7c672c0d8be
To prevent property name collisions between properties of system and
vendor, 'vendor.' prefix must be added to a vendor HAL service name.
You can see the details in http://go/treble-sysprop-compatibility.
Test: succeeded building and tested on a walleye device
Bug: 36796459
Change-Id: I4e8fbee791ec917a8f627a1366f4d44ec7e6febc
Bug # is example where owners file would have
appropriate expedited the fix.
Bug: 64482271
Test: Treehugger (if relevant) - OWNERS file only
Change-Id: If82a2794ae40d48542006674c3c57a1e21c5124b
Full bias nanosecond flag is now set correctly for
legacy GpsData (vs. modern GnssData) implementations
of gps.h measurements, going through default GNSS
HAL implementation.
Change-Id: Iec8f03994b6d9e509221e1323b54dc997319fccc
Fixes: 64482271
Test: Before/after on device with GnssLogger
Bug: 36084078
Fixes: 36084078
Test: Delete-all GPS tests at desk - Xtra downloads fine
and GPS works
Change-Id: I58fa7d970178577cf177a337117b259dbd9fd266
Both system and gps groups might be relevant to the implementation of a
GNSS HAL.
b/36651420 [QCOM Treble] marlin/sailfish location daemon uses Binder
b/36085168 STOPSHIP - HAL (GNSS) cannot have internet access
b/35757613 STOPSHIP: O GNSS TTFF - Regressed to Cold Start (XTRA
broken) (revert SELinux Change)
Test: marlin
Change-Id: I8aa5b18ef094b8540e7838174154f060a0c3fa9a
Merged-In: I8aa5b18ef094b8540e7838174154f060a0c3fa9a
Signed-off-by: Iliyan Malchev <malchev@google.com>
Stops all GNSS HAL operations, as system doesn't need them any more:
normal, measurements, navigation message, batching
Update default implementation to resend capabilities and system info
and corresponding VTS to enforce
Minor fixes completing the location check
Softens GPS VTS to pass with no signal (still applies better checks
if there is signal)
Bug:36291274
Bug:36066672
Bug:35678469
Bug:35799723
Fixes:36291274
Fixes:36066672
Fixes:35799723
Test: VTS test passes, GPS stops after system server is killed
Basic GPS tests (including delete Xtra) work (before VTS is run)
Change-Id: Ic2ab0f8a79b4aff26eef468615bfee97a83e672f
Adding group inet permission
for the GNSS HAL default implementation
for the XTRA-assisted-GPS file
(from internet) download use case
Bug: 35768061
Bug: 35757613
Bug: 34208553
Test: On Marlin - manual GPS tests
including delete all then restats
with xtra throttle off
Change-Id: I54090979eff53e83a267ce8f6ad84b2aceae290a
The getService() and registerAsService() methods of interface objects
now have default parameters of "default" for the service name. HALs
will not have to use any service name unless they want to register
more than one service.
Test: builds
Bug: 33844934
Change-Id: I0c0cafff5079e49edbfd1f4858760f0c53d3fcfa
Also, reset static state in destructors of interfaces.
Until now, new interfaces were being created for each repeated
getExtension() call to the Gnss interface. This was causing
asserts to fail which were checking for multiple
simultaneous instances of these interfaces.
Death notifications should still required to be created for all
interfaces including callback interfaces.
Bug: 35391416
Test: Verified that Maps still work after forcing a system_server
crash.
Change-Id: I8ce0888016637a3d9b62db5619a3c8c569262c0d
We need google shims on the vendor partition because they are providing
an implementation of a vendor defined interface. They were written by
google just as a courtesy/to make the transition easier. They're
basically a set for vendors to assemble their hal implementations
from.
Bug: 34135607
Test: marlin persist.hal.binderization on/off
Change-Id: I2e2af5af39264cf290259755bb9b2eb9827a21f5
Connecting GnssBatching from fused_location.h
through to the IGnss(Batching).hal
Test: Basic regular GNSS and batched GNSS
functional tests on Pixel
Change-Id: I3ff72c626acece891fd9e5ef2802b3489dac5dd2
Added "Tow Known" as a possible gnss measurement state. As well added Automatic Gain Control (AGC)
to allow jammer detection. Also added the GNSS carrier frequeny to SV status. Also adedd vertical
GPS position uncertainty, speed uncertainty and bearing uncertainty. Also propagate locaton new
fields to geofence engine.
Test: Existing unit tests still pass.
Change-Id: I26784a17e82c044002395e1929f8862cc9de63cb
New HAL APIs for Gnss location batches,
still to be connected (default implementation)
similarly to this aspect of fused_location.h,
initially as a single client system API.
Bug: 31974439
Test: Ensured it builds and runs GPS & FLP (in Test app & maps)
Change-Id: I27d3fd2cffad25039b006e60c4496a440dc86c13
Test: On Angler, GPS location available on Maps. All interfaces other
than AGnssRil, AGnssNavigationMessage and GnssNi are functionally tested. AGnssRil and
AGnssNavigationMessage are not implemented by conventional GPS HALs in Google devices that would be
upgrading to O.
Bug:31974439
Change-Id: I66225225ed79bc1735d6dd27954b1f9f69ffc557
