Because this HAL was converted to AIDL.
Can't be completely removed until frameworks/base is refactored not to
use it, but doing this so no more dependencies are accidentally taken
downstream.
Bug: 141828236
Test: N/A
Change-Id: Ic920f59a1a0ad933e5c80c468700ef4514b4a9c9
This HAL is optional for now as breaking changed are planned.
It might get required for new device before R release.
Test: push V6 to device and check audio works fine
Bug: 134940862
Change-Id: Ib4a906da1c1d3d489003a6642bfc55b142424155
Merged-In: Ib4a906da1c1d3d489003a6642bfc55b142424155
Signed-off-by: Kevin Rocard <krocard@google.com>
This is from running:
hidl2aidl android.hardware.vibrator@1.4
and then making several small modifications.
Bug: 141828236
Test: dumpsys on cf
Change-Id: I612e903c1e3f63f0470f8e5c827345c5b67d5645
libsnapshot needs to communicate to the bootloader that a merge is in
progress. This can be used to prevent factory data resets, prevent
flashing or wiping userdata/metadata, and warning when the active slot
changes.
Bug: 138861550
Test: builds
Change-Id: I577877696b5ec6920b9520d518374931ce9ddfaa
Merged-In: I577877696b5ec6920b9520d518374931ce9ddfaa
This HAL interface was setup to have multiple clients, but the interface
(and many implementations) didn't separate clients use of callbacks.
That is, one client could delete the callback of the other.
Instead, thermal@2.0 should be used.
Bug: 118792995
Test: assemble_vintf
Change-Id: I2338cf63c6f450b22894406c9426d8d2ddac1057
1.1 IRadioConfig does not exist. radio.config@1.2 is a
minor version uprev that only updates the sub interfaces,
not the top level interface.
Test: builds
Bug: 135172251
Change-Id: Ia576cea29c63850ddb531f7c972fa4ebaecd20c7
compatibility_matrix.4.xml was updated for a late fix in Q, so the
current matrix also needs to be updated.
Bug: 135627722
Test: vts_treble_vintf_test
Change-Id: I0cca7c55007d42ed8e86256b7b280b075378bc40
This reverts commit 373a240386.
Bug: 123249760
Test: Both of P19 & P20 build pass, basic functions work and HAL 1.4 works.
Change-Id: I69f794f25d7c87c65df749c39ed29b1e0f476b03
This was added to the PI (3) compatibility matrix but not to the
current matrix.
Bug: 126892442
Test: diff between 3 and current FCM only reflects intentional changes
Change-Id: Ib6d243d2015cb847afad63075387945a74c30f13
- configstore@1.2 no longer exists
- configstore@1.1 is being deprecated in favor of properties
Bug: 122461092
Bug: 124531214
Test: manual
Change-Id: Ia1411ca5db897b3d9f67a4450cf10f878ddc64b9
Sometimes, the camera service needs to notify a camera HAL that the
overall device physical state has changed, so that the HAL can
properly remap how it handles logical multicamera devices or similar.
Test: Builds, new VTS tests pass
Bug: 121379978
Change-Id: I0982fdecaf53a0529289d63c08c5a31264ee7ec7
Before:
1.0-1.1 is optional, but an implementation of 1.2 is required.
After:
1.0-1.2 can be used.
Bug: N/A
Test: N/A
Change-Id: I631c253ee44f858e3c1912106cb42682eb044c05
This reverts commit 1b066c8d1d.
Reason for revert: <This CL isn't related to public API which triggered previous revert>
Change-Id: If1fa2a244e5f4ee7f978cda79421172da02220f1
Add sendSessionEvent to notify hal what happened on a session.
Add onSessionEvent to listen notification from hal for a session
Test: manual
Bug: 122472761
Change-Id: I98434325915e7bee57e63bdeeedba9ed5578e493
Fix the compatibility matrix with range of versions
Bug: 122994344
Test: verified manually
Change-Id: Ic5ebb7261d2fe8f379d46ebcc0c47efe8dbd3c59
Merged-In: Ic5ebb7261d2fe8f379d46ebcc0c47efe8dbd3c59
Supports reporting and userspace control of USB contamination presence.
Bug: 117330206
Bug: 77606903
Bug: 119642987
Test: USB HAL V1.2 HIDL tests.
Change-Id: I70219641cdd48d59d217334dbd6d4ed8a8ce4927
V2_2 has the same functionality as V2_1 except it adds one new
api, getModelState.
Note: V2_1 will be removed in a subsequent cl.
Test: built android and tested using SoundTriggerTestApp
Bug: 70206501
Change-Id: Ia1567bfc988482195b89b8d6a0901d51e870bfbf
Generalized Bluetooth Audio HAL interface.
It is similar to the original android.hardware.bluetooth.a2dp@1.0
interface with the following modifications:
* The session type can be one of the following:
- A2DP Software Encoding Datapath
- A2DP Hardware Encoding Datapath
- Hearing Aid Software Encoding Datapath
* For Hardware Offload Datapath (A2DP), the HAL interface is used only
for the control path
* For Software Encoding Datapath (A2DP or Hearing Aid), the HAL
interface is used for both the control and data paths
* Added Delay Report support: IBluetoothAudioHost.getPresentationPosition()
that was missing in the original android.hardware.bluetooth.a2dp@1.0
HAL interface.
* Removed "oneway" calls to avoid potential reordering of HAL calls:
b/111244402
* Updated SBC-specific codec configuration
* Added AAC-specific and LDAC-specific codec configuration
* Reorganized the original CodecConfiguration into two sections:
- PcmDataConfiguration: Audio PCM data configuration
- EncodedDataConfiguration: Encoded audio data codec configuration.
It is used only if the HAL is responsible for encoding the PCM audio
data.
* Added new HAL IBluetoothAudioProvidersFactory.
It is used to open an audio provider for an audio session as specified by
the session type and the codec configuration as negotiated with the
remote device.
Bug: 111519504
Test: manual
Change-Id: I2ee4cf50b177baee077cf0b5143dbeadda57c8fb
Merged-In: I2ee4cf50b177baee077cf0b5143dbeadda57c8fb
(cherry picked from commit fcc0732db4)
Increase IAllocator and IMapper to 3.0. This patch does not add
any new features.
Bug: 120493579
Test: vts
Change-Id: I84d9887f94d91eca1cc5d845bb11ac1d8affbf62
Generalized Bluetooth Audio HAL interface.
It is similar to the original android.hardware.bluetooth.a2dp@1.0
interface with the following modifications:
* The session type can be one of the following:
- A2DP Software Encoding Datapath
- A2DP Hardware Encoding Datapath
- Hearing Aid Software Encoding Datapath
* For Hardware Offload Datapath (A2DP), the HAL interface is used only
for the control path
* For Software Encoding Datapath (A2DP or Hearing Aid), the HAL
interface is used for both the control and data paths
* Added Delay Report support: IBluetoothAudioHost.getPresentationPosition()
that was missing in the original android.hardware.bluetooth.a2dp@1.0
HAL interface.
* Removed "oneway" calls to avoid potential reordering of HAL calls:
b/111244402
* Updated SBC-specific codec configuration
* Added AAC-specific and LDAC-specific codec configuration
* Reorganized the original CodecConfiguration into two sections:
- PcmDataConfiguration: Audio PCM data configuration
- EncodedDataConfiguration: Encoded audio data codec configuration.
It is used only if the HAL is responsible for encoding the PCM audio
data.
* Added new HAL IBluetoothAudioProvidersFactory.
It is used to open an audio provider for an audio session as specified by
the session type and the codec configuration as negotiated with the
remote device.
Bug: 111519504
Test: manual
Change-Id: I2ee4cf50b177baee077cf0b5143dbeadda57c8fb
In order to continue providing the best Telephony
experience possible, Android devices that ship
with Q should implement the IRadio 1.4 HAL.
Likewise, new devices should ship with IRadioConfig
version 1.2.
Bug: 112764647
Test: compilation; boots with Pixel 2
Change-Id: I7ce1a7e81dc54d6e4e13b4bdaad8228465bf1570
