VTS gets the name of all the cameras in the machine and check each camera, When traversal to the configuration reference of 1600*1200 camera, the outputPreviewStreams variable does not clear, save the value of the Previous camera
The outputPreviewStreams variable needs to be cleared when check next camera
Bug: 122806546
Test: ConfigureStreamsWithSessionParameters can pass when one of the three cameras was configured with a maximum android.scaler.availableStreamConfiguration size of 1600*1200
Change-Id: Ia4845d43871730e14b5ba1411ce72f8c4bb69042
Camera devices 3.5 and later can optionally support
stream combination queries. These use the regular
'StreamConfiguration' structure however in contrast
to normal stream configuration, the query will be
much faster and will not cause any HW/SW side effects.
Additionally it will be possible to run stream
combination queries at any time after the camera
device is open.
Implement stream combination query for the external
camera provider.
Bug: 111593096
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I59ec936d17dabc89ba49407a750df1cd2e61b145
Hal must be able to recommend efficient stream
configurations for common client use cases. Add the
necessary static metadata keys.
Bug: 64029608
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I0c2306501094383af78cb7ced1fa700b259d2b08
Also includes:
- Add test for getPhysicalCameraCharacteristics.
- Doc update for the new HIDL API.
- Tighten boundary check for camera ID in CameraModule.
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --module VtsHalCameraProviderV2_4Target -l INFO
Bug: 79523700
Bug: 115969176
Bug: 116512585
Change-Id: I051d1b0c91834781a1f8d893ed5ebfa579b03774
Verify that device implementations do not set the
new privacy characteristics key:
ANDROID_REQUEST_CHARACTERISTIC_KEYS_NEEDING_PERMISSION
As required by API contract.
Bug: 112160024
Bug: 115969437
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I8d8f0d0e1cdec24117d47e7ae45602f56573376f
The advertised ISO ranges may not be entirely supported on
some devices. Expect a 3% tolerance when comparing the applied
results versus the expected ISO value.
Bug: 80025874
Test: run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Merged-In: Ibd2758e48a0924e81877e35dd27433669274fdb3
Change-Id: Ibd2758e48a0924e81877e35dd27433669274fdb3
(cherry picked from commit 0fdd7cdc0e)
After flushing the camera requests don't try to close the
camera session while still holding 'mLock'. Different Hals
could still try and return additional results which then will
get blocked on 'mLock'. Closing the session could potentially
introduce a deadlock if the Hal implementation waits for any
of the result calls to return.
Bug: 111836165
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I0f309f435cc76db3f9b6ba500da65a232b014717
Merged-In: I0f309f435cc76db3f9b6ba500da65a232b014717
(cherry picked from commit 8e92056837)
After flushing the camera requests don't try to close the
camera session while still holding 'mLock'. Different Hals
could still try and return additional results which then will
get blocked on 'mLock'. Closing the session could potentially
introduce a deadlock if the Hal implementation waits for any
of the result calls to return.
Bug: 111836165
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I0f309f435cc76db3f9b6ba500da65a232b014717
The advertised ISO ranges may not be entirely supported on
some devices. Expect a 3% tolerance when comparing the applied
results versus the expected ISO value.
Bug: 80025874
Test: run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: Ibd2758e48a0924e81877e35dd27433669274fdb3
Per API specification "physicalCameraId" must not
contain any logical camera ids. The test case
should only use the physical ids it receives from the
camera static metadata.
Bug:109874630
Test:run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I82c5bf44f4572b3a6abdbb3101a11140907b1c9e
Camera graphic buffers should always be allocated using the
respective HIDL API.
Bug: 77681294
Test: run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: Ibef88548fc3d29df606e4f66f5f3f4e89d3bf654
Also remove the length check for getCameraIdList as external
camera providers are supposed to report 0 there.
Test: atest VtsHalCameraProviderV2_4Target (on marlin)
Bug: 69473913
Change-Id: I9059a699a6c46a3aac76454e7e8673d2539d0fa1
A test is needed which will generate a burst request
that contains alternating sensor sensitiviry values.
The corresponding results need to be verified accordingly.
Bug: 37533777
Test: run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I58ccb645b83c48ba3360aae5ad44036ce213964d
Empty individual physical settings should be allowed after
one initial successful request.
Bug: 72524845
Test: run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I18d22a56f5f0e6e1d81a6e8c844697c02bc343a1
Individual physical camera requests should only be allowed
in case the respective physical Ids are among the last
configured Hal streams.
Bug: 72524603
Test: run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: Ia5715398f74f03528d7fe2e52e5b9e32ad654a2c
Multi-camera devices should be able to accept and process
individual settings for all physical sensors backing the
logical camera. 'CaptureRequest' must be extended to hold
these additional physical camera settings.
Test: Manual using camera application,
camera_client_test,
run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Bug: 64691172
Change-Id: Ia38d1e7681a9385be7578c11e40f4e35e9101d75
- Add physical cameraId field in stream structure.
- Override processCaptureRequest due to physicalCameraId change.
- Update 3.3 metadata with logical camera characteristics.
Test: Camera CTS on Taimen, LogicalCamera CTS test on C1
Bug: 64691172
Change-Id: I65bd1ae38381ecb89fae439ae14b813c9bcc3248
To avoid glitches and unexpected behavior, session parameters
should be included in the stream configuration before invoking
capture requests.
Bug: 70560715
Test: run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: Id4ecd40533157f1a3299099a984ffab21654548a
Camera devices supporting version 3.4 will be able to receive
session parameters during the stream configuration phase.
Bug: 64450664
Test: Camera CTS
run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --primary-abi-only --module
VtsHalCameraProviderV2_4Target -l INFO
Change-Id: Ifd83bfe0e512fe75b63602b4aba98f4cc1cdeb53
- Cross check device version in name with ICameraDeviceSession version
- Switch all calls to configureStreams to configureStreams_3_3 when
a v3.3 ICameraDeviceSession is available
Test: Test passes on v3.3 devices, doesn't regress on v3.2
Bug: 62358514
Change-Id: I7450e5d5119c5ec1fe9f1360bfc99fc8a47d0936
A new 3.3 Camera device API is available and devices supporting it
need to be tested as well.
Bug: 67028051
Test: run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --primary-abi-only --module
VtsHalCameraProviderV2_4Target -l INFO
For passthrough devices: run commandAndExit vts
--skip-all-system-status-check --skip-preconditions --abi armeabi-v7a
--module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I91adb3c1867cdd8f8f810a2bd5b0a8ba2b0c1fcf
* For registerTestService/getServiceName, no need to pass
any hard coded string of HAL service FQName.
* Affect test: VtsHalCameraProviderV2_4TargetTest,
VtsHalGraphicsComposerV2_1TargetTest,
VtsHalNeuralnetworksV1_0TargetTest
Bug: 62946472
Bug: 64203181
Test: make vts
vts-tradefed run vts -m VtsHalCameraProviderV2_4Target
Merged-In: If365ab2ed9a91eb4013d71769804b9d4bf089d66
Change-Id: Id0bddbc2949337147557f45cc60dbfaa114ce25e
(cherry picked from commit d71b654d6d)
Calls to 'cancelPicture' should be no-ops in case image capture
is not active.
Bug: 64569316
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --primary-abi-only --module
VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I5fad0a5b7aafd208c3a1b2f62a2b9046cde858d1
It is possible that the current default consumer usage
flag may not be supported by some provider implementations.
Use either HW composer or some other flag that is appropriate
for the specific use case.
Bug: 63913159
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --primary-abi-only --module
VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I04f89bf67166805191d6d40e5bd93c15ebc97ea6
Also fix wrong return values for processCaptureRequest in default
wrapper.
Test: running camera VTS
Bug: 64041692
Change-Id: I397390af7c85a776713f6287bef1c4d11c721c9a
Back port from master
Test: VTS test pass
Bug: 63570734
Change-Id: Ic0eecaf843b5c2e78f60325090ea652d43a74a0b
Merged-In: Ic0eecaf843b5c2e78f60325090ea652d43a74a0b
Some provider implementations could still be using direct
transfer of the result metadata through hw binder.
Bug: 63970723
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: Ib2adaff005af77385767a32c1ed069371a6e9b7a
* Use VtsHalHidlTargetTestEnvBase to run test against different service name
Bug:62946472
Test: make vts
vts-tradefed run vts -m VtsHalCameraProviderV2_4Target
Change-Id: I12edce57c237cb6674e0aff437c3389e5ad9e028
Listing by interface on passthrough only devices doesn't
return the legacy implementation that might be present.
For this case try to connect to the legacy provider and
check whether such implementation does in fact exist.
Bug: 62835396
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: Ifdc1b15392f5418fd0d949953bb6bdb1f3612ee8
Check whether different types of camera providers got
registered and try to test them if present.
Bug: 62835396
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I5c0c678e74d56cd8307d2f4e63b7c6dfa95d210d
Currently the result handling is very basic. Partial
results and inflight queues are not supported. More
elaborate test cases like burst or streaming will
require such functionality to be present.
Bug: 62550376
Bug: 37533777
Test: adb shell
/data/nativetest/VtsHalCameraProviderV2_4TargetTest/VtsHalCameraProviderV2_4TargetTest
Change-Id: I3769d4ccc0047dc4eda173ea3bca538b026be8d2
