A follow-up for aosp/2929441. The interval between retries
of connecting to BT proxy must be reduced significantly.
Otherwise, in situations when the BT is not connected
(that happens during tests), the resulting long delay causes
failures at the frameowork level due to resulting long
timeout.
Bug: 322820830
Test: atest audiosystem_tests --iterations 100
Change-Id: Idd84cb22b28d109151f98bb5883dca18a9ae928d
When ModuleBluetooth::createProxy is invoked on BT device
connection, the BT stack may not be fully ready yet,
and port registration can fail. This is an intermittent
state and registration should succeed after retrying.
Bug: 320838889
Test: atest pts-bot:A2DP/SRC/REL/BV-02-I
Change-Id: I0c7cf7c1c6a8ee03ef55b004f89139e3b56ee9cd
In case when the command was sent by the HAL itself (from another
thread), the worker thread must not post a reply. The only case
when a reply needs to be posted is in the case when the command
was sent from a VTS test. This case is identified by the fact that
the cookie has value '0'.
Bug: 300181540
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ifeb0722b5cf7346a694c5a938f6b324f5fa825f1
Implement IModule::dump to display the current state in
the audioflinger dump.
Throttle repetitive logging when there is nothing to read.
Remove stale comment for already fixed b/307586684.
Bug: 307586684
Test: adb shell dumpsys media.audio_flinger
Change-Id: I1f1f6e1658d035d46af3a933a825b20a78c7f297
On 32-bit builds, the 'long' type is 32 bit. Thus, it can not
be used to store the value returned from 'uptimeNanos'.
Bug: 318055805
Test: atest CtsMediaAudioTestCases
Change-Id: I4abf72415b7241728d3ddb1d11043dfd59a8d08a
In order to align with legacy behavior, when opening a stream,
the module must suggest the current configuration of the BT session.
For that to work, the BT device proxy must be opened prior
to creating a stream, code moved to ModuleBluetooth.
Fix minor inconsistencies and bugs found during testing.
Bug: 301213930
Bug: 316027906
Test: atest pts-bot
Change-Id: I04ddaf73be82f872a3f32a789563c3cbd648eb61
When there is a pipe established for a remote submix
device, suggest the configuration of the peer when opening
the other end.
Refactor SubmixRoute management to move it out from
StreamRemoteSubmix so that ModuleRemoteSubmix could also
use it.
Bug: 294962274
Test: atest audiorouting_tests
Change-Id: Ib31a662e7b65b92c614dc441a01160cae3485f3a
In 'Module::setAudioPortConfig' allow subclasses to provide
their own suggested configuration.
In 'Module::populateConnectedDevicePort' provide the ID of
the device port instance that will be created as a result
of connecting an external device.
Also, expose 'ModuleDebug' flags to subclasses so that they
can know when device connections are simulated.
Bug: 264712385
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Iceb2bdeb61c3470554b592fe197efa54d3b9e578
When external device is about to disconnect, the audio framework will
notify the HAL module about the coming device disconnection so that the
HAL module could abort any active read/write operations on drivers to
avoid problems with the HW interfaces.
Bug: 279824103
Test: atest VtsHalAudioCoreModuleTargetTest
Change-Id: I9f960b8ae5df11a764e70bd63f98c0f8b8386c34
Merged-In: I9f960b8ae5df11a764e70bd63f98c0f8b8386c34
When external device is about to disconnect, the audio framework will
notify the HAL module about the coming device disconnection so that the
HAL module could abort any active read/write operations on drivers to
avoid problems with the HW interfaces.
Bug: 279824103
Test: atest VtsHalAudioCoreModuleTargetTest
Change-Id: I9f960b8ae5df11a764e70bd63f98c0f8b8386c34
Similar to the primary module implementation, align the time
spent in the transfer operation with the duration of audio.
Change the read operation to ingest as much data as possible
during the audio burst duration.
Ensure that checking the existence of a SubmixRoute and adding
a new one is an atomic operation.
Minor improvements to avoid extra synchronization.
In the configuration, change the limit of max open streams to 10
to match the legacy implementation.
Bug: 302132812
Test: atest CtsMediaAudioTestCases --test-filter=".*AudioPlaybackCaptureTest#testPlaybackCaptureDoS"
Change-Id: Iccb6aaac46c039551c3d5f7760b1459168d9cfe5
android.hardware.bluetooth.audio should really be registered in its own
process, but this is a temporariy solution that is similar to the
old HIDL example.
Test: launch_cvd
Bug: 312265159
Change-Id: Ib60e2654d3b751bedf256d90de72921210174fe4
The default implementation of the primary HAL is intended to
work with the AVD. Current implementation of virtualized audio
I/O on AVD falls behind actual hardware in terms of I/O timing.
This is not tolerated by CTS tests which are tailored for
real hardware.
Make the primary HAL implementation more resilient to irregular
ALSA read/write behavior on AVD by prolonging I/O time, or
skipping operations when falling behind expected time.
Bug: 302132812
Bug: 302587331
Test: atest CtsMediaAudioTestCases
Change-Id: Ia290d9541a8a0e22d28024f7930ef554396d63c6
Fix the issue with retrieving BluetoothA2dp and BluetoothLe
instances access.
In 'Module::connectExternalDevice', always call
'populateConnectedDevicePort' to allow the module implementation
to cancel device connection.
Move frame count calculation into Utils.
Clean up includes and 'using' directives.
Bug: 302132812
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I22f65b8bcdcdd9bcd67a8290520eb4a465d4c720
The latency figure depends on the module implementation.
Instead of using a hardcoded value, each module should be
able to specify its own value. This value is then used
for calculating the minimum buffer size.
Set the nominal latency of the primary (CF) module to a high
value since the virtual device implementation fails CTS tests
if it attempts to pretend that it provides low latency.
Bug: 302132812
Test: atest CtsMediaAudioTestCases --test-filter=".*AudioTrackTest.*"
Test: atest CtsMediaAudioTestCases --test-filter=".*AudioRecordTest.*"
Change-Id: I8ce9f230378eea787c9b3c7ce3660c1e4e7bc895
The implementation had duplicated code in 'transfer', which already
present in 'outWrite'.
Cleaned up delay calculations and logging.
Fixed the VTS to send 'prepareToClose' before attempting to join
the worker. Otherwise, the worker could be stuck on a blocking
operation due to inactivity of the other party and join would never
happen.
Bug: 302132812
Test: atest VtsHalAudioCoreTargetTest --test-filter="*AudioModuleRemoteSubmix*"
Change-Id: Id8455eb12d1d2999dc0bc7b64f0d70a61a177598
** Partial upstream of ag/24854732. Only the interface part is
** included.
This should enable the sound dose gts on cuttlefish devices. The sound
dose HAL uses the internal MelProcessor to compute the MELs which are
reported to the framework.
Test: atest GtsAudioTestCases:SoundDoseTest
Bug: 301527435
Change-Id: Ifc505a0171bc8b4d3f5cf65d950fa5c0f812087f
Merged-In: Ifc505a0171bc8b4d3f5cf65d950fa5c0f812087f
For external (non-attached) device ports that have dynamic
profiles, 'connectedProfiles' must be provided. They are
used when 'ModuleDebug.simulateDeviceConnections' is enabled.
Bug: 205884982
Test: atest VtsHalAudioCoreTargetTest
(cherry picked from commit a29393db39)
Change-Id: I69707d610c34f8f1eae9ef81768b76c40e985c0f
Added a virtual method Module::getMicrophoneInfos
so that vendor implementations can provide actual
data about device microphones. This information
is not part of the APM config file.
Bug: 205884982
Test: atest VtsHalAudioCoreTargetTestTest
(cherry picked from commit dc9d1a4b42)
Change-Id: I3ea9ba8da79fd29f8d69c5a575a57851d73df7b8
The default implementation now loads the HAL configuration
from the legacy XML configuration file which was previously
consumed by the framework directly.
Note that errors in the config file will lead to crash
of the XML parser, pointing out to the source of the problem.
IMPORTANT NOTES:
- Never use untested legacy config files with production
devices.
- Make sure that all possible configurations (for example,
BT offload on/off) are tested.
Bug: 205884982
Test: atest VtsHalAudioCoreTargetTest
(cherry picked from commit 00a7307862)
Change-Id: Id1002cb065e7cc19bdd520aca15b3fe5d39e5853
For external (non-attached) device ports that have dynamic
profiles, 'connectedProfiles' must be provided. They are
used when 'ModuleDebug.simulateDeviceConnections' is enabled.
Bug: 205884982
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ic82e47abc50e2958ed93f5d4d18082b569ecb67b
Added a virtual method Module::getMicrophoneInfos
so that vendor implementations can provide actual
data about device microphones. This information
is not part of the APM config file.
Bug: 205884982
Test: atest VtsHalAudioCoreTargetTestTest
Change-Id: I4b650ae221ba866421bbf8500ad8c17f04bc4aa7
The default implementation now loads the HAL configuration
from the legacy XML configuration file which was previously
consumed by the framework directly.
Note that errors in the config file will lead to crash
of the XML parser, pointing out to the source of the problem.
IMPORTANT NOTES:
- Never use untested legacy config files with production
devices.
- Make sure that all possible configurations (for example,
BT offload on/off) are tested.
Bug: 205884982
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I01e4cd77a284d7df64ecb0c0b21cb16abfa0f6c5
Some device ports are connected via ADSP which takes care
of the actual audio configuration (format, channels, SR),
for example the built-in speaker and mic ports, as well
as some external devices like analog headsets.
In the legacy implementation, such device ports did not have
any profiles specified. Allow the same behavior in the AIDL
implementation. To ensure correctness, device ports with no
profiles must be routable to mix ports that have profiles
specified. This requirement is fulfilled in legacy configs.
Bug: 266124463
Test: atest VtsHalAudioCoreTargetTest
Test: atest audiosystem_tests audiorouting_tests
Test: atest CtsMediaAudioTestCases
Change-Id: Iaccd1e8ef2a5af9a5f8bae453905d01c6b7fdc28
This should enable the sound dose gts on cuttlefish devices. The sound
dose HAL uses the internal MelProcessor to compute the MELs which are
reported to the framework.
Test: atest GtsAudioTestCases:SoundDoseTest
Bug: 301527435
Change-Id: Ifc505a0171bc8b4d3f5cf65d950fa5c0f812087f
A mix port can be patched to multiple connected device ports. Thus, when
disconnecting an external device and removing the connected port, the
profiles of the mix port can only be cleared iff there are no more
connected device ports patched to it, and it did not have profiles prior to
connection of the first device.
Enhanced VTS tests to catch this problem in the HAL implementations. Also,
ensure that audio ports and audio routes do not change after the test
finishes. This ensures that tests can't affect each other.
Bug: 298175108
Test: atest audiosystem_tests
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ia666b874958fb260513fc2b8cd20a823953ec679
In rare cases, a worker thread from a new stream created
via StreamSwitcher can read again from the command FMQ
the "exit" command which was sent to the worker of
the previous stream.
The underlying reason for that has to be investigated.
For now, mitigate the issue by salting the cookie of
the "exit" command with the worker's TID.
Bug: 300130515
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ie7d2e847e8b39414ffd31afd64e32d4c9a292c03
In the case when there is a problem with the legacy APM XML file,
the converter provides a default surround sound config. However,
the default implementation of IConfig::getSurroundSoundConfig did
not take an advantage of that, and was returning an empty config,
which is not accepted by VTS.
Also, improve logging messages: clarify the situation when no readable
audio policy XML file found, and use outer functions name for lambdas.
Bug: 293978054
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Iae069a0498009605ef5ededb9c9112efab08548a
- remove the default address "0" for IN_SUBMIX and OUT_SUBMIX;
- remove the profiles in the device port and assign profiles when
connecting;
- make remote submix input to use "virtual" connection type,
same as the output;
- fix ModuleConfig in VTS to avoid returning devices with virtual
connections as "external devices" because they can actually
be connected even when connection simulation is disabled;
- fix TryConnectMissingDevice VTS test to disconnect the device
if the operation has unexpectedly succeeded.
Bug: 286914845
Bug: 294976817
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ife11c9c356d1b5dc587d08cef47294e3b29f65c5
