Add ANDROID_SENSOR_TEST_PATTERN_MODE_SOLID_COLOR as an available
test pattern for ExternalCameraDevice (v3.4).
Bug: 182204067
Test: Connect an USB camera.
Enable camera privacy toggle.
Apps using the camera should get a black preview
Change-Id: Ie0d4d5b3f555eb9e1b1fc255b612668736daeaa4
With current implementation cameraId is part of something like:
device@3.5/external//dev/video0
This doesn't work well with Camera2 API based apps.
Adding CameraIdOffset tag to Provider as a base offset.
Change-Id: I6309d16be565616f048fb24a70e9be5b2f5ed480
Test: camera VTS test + add manual delay to webcam HAL output thread
so there will be some requests left for offline processing
camera CTS OfflineSessionTest
Bug: 135142453
Change-Id: If5718350707ef051f96b96da75f934089b10467d
First CL to setup webcam HAL to support HIDL camera device 3.6.
Follow up CL will add actual offline processing capability.
Test: TestingCamera.apk
Bug: 135142453
Change-Id: Ifcd1b22f42d08b0fa5dc6039125c1d979b8104c2
Starting from CameraDeviceSession 3.5, for IMPLEMENTATION_DEFINED pixel
format, configureStreams call uses original format and dataspace instead
of the overridden value.
This makes sure the HAL interface behavior is consistent between first
and subsequent processCaptureRequest() calls.
Test: Camera CTS and partner testing
Bug: 131864007
Change-Id: Id701141d2c11089ef063fd3f32444212855f84ab
added Y16 (depth) support for the external provider.
refactored initOutputCharsKeys to support both depth and color metadata according to the connected camera.
the VTS changes will be pushed to pie-vts-dev
Test: tested on intel depth camera D415 manually in addition to the VTS tests.
Change-Id: I358686e7c4330bb180dec4a9cce3bc1cf5475260
Signed-off-by: Emil Jahshan <emil.jahshan@intel.com>
Handle the race issue in the wrapper HAL instead of letting HAL
implementation handing it.
Test: Pixel 3 + camera CTS + GCA
Bug: 120986771
Change-Id: Iff97fcaa969bea6668679c57642e4322c4ca5c19
Add buffer management API support.
Test: VTS to be written. Need Pixel device impl to verify.
Bug: 120986771
Change-Id: Icdbc621f8cd17aa0868d3ac361867c44793a268c
Camera devices 3.5 and later can optionally support
stream combination queries. These use the regular
'StreamConfiguration' structure however in contrast
to normal stream configuration, the query will be
much faster and will not cause any HW/SW side effects.
Additionally it will be possible to run stream
combination queries at any time after the camera
device is open.
Implement stream combination query for the external
camera provider.
Bug: 111593096
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I59ec936d17dabc89ba49407a750df1cd2e61b145
External camera@3.5 supports the new buffer management
API that allows HAL to request buffer when needed to
optimize the memory usage.
Test: smoke test TestingCamera
Bug: 109829698
Change-Id: Icfbb75a26d8e92e4eb82a680e94e183041a5174d
This option allows HAL to opt in for the behavior that will free
cached buffers earlier if the libhardware HAL implementation
doesn't cache/reference the cached buffers internally.
Test: buffers are freed earlier when the property is set
Bug: 111850884
Change-Id: I3a10b288c7160c86dc7d3a30d04b5c4903917731
HW video encoder usually has limitation to encode very small
stream. Camera should avoid to return such streams to avoid
video encoding failure.
BUG: 110654511
Test: CTS android.hardware.camera2.cts.RecordingTest#testSupportedVideoSizes
Change-Id: I6104f2d4efcf7831d1dc6d305c82309e2fd1999d
V4L2 buffer size should fall within a reasonable range
like (0. width*height*2]. Check and return appropriate
status in case the size is not within this range.
Bug: 72261912
Test: Camera CTS
Change-Id: I1945dc734afb552ecb8d4ef74c9198eca8ce00e7
Make sure that num_physcam_metadata, physcam_ids, and physcam_metadata
returned from process_capture_result is sane.
Test: LogicalCameraDeviceTest
Bug: 77218595
Change-Id: Ic4d9823569fb86b20ab2ab21edfc32a0e9f5c9c7
1. Add EXIF MAKE/MODEL tag
2. Add retry loop for V4L2 open failure
3. Do not add external camera if ExternalCameraDevice cannot be
initialized
Bug: 72261912
Bug: 72569850
Change-Id: I06df1fbbb4afabea1a9a74aca9e288b24966cb0b
V4L2 doesn't seem to allow changing fps at runtime, so we need to
wait until pipeline is idle and reconfigure V4L2 streams.
Also update the fps filtering logic to make sure supported fps
are consistent as long as the major dimension is the same.
Ex: for 4:3 webcams, all 1280*N sizes has the same fps set, or
for 16:9 webcams, all N*720 sizes has the same fps set.
Bug: 72261912
Change-Id: I534f09bebadb2f532a030a841633a8be7d3a87cc
Simplify the API for the P release
- Remove new templates
- Update docs
- Also update some metadata docs from prior changes
Test: Revised Camera CTS passes
Bug: 63629224
Change-Id: I47fb170052cf6062955278ace624a91e8a0078b3
- When physical stream of a logical multi-camera is requested, HAL needs
to generate metadata for the physical cameras.
- In case no physical stream is requested for the logical multi-camera, no
capture result metadata is required for physical camera.
- Batch physical and logical metadata within one capture_result call.
Test: testLogicalCamera CTS test
Bug: 64691172
Change-Id: Id040620f3f0c350711d49341ab31ab88ecd94888
- Extend RequestTemplate with two new values
- Add legacy wrapper support for the new templates
Test: Builds, camera continues to run. CTS coverage of templates
tests new templates as expected.
Bug: 63629224
Change-Id: I2a44d86a815690798fa4b8327794c64716d134ee
Multi-camera devices should be able to accept and process
individual settings for all physical sensors backing the
logical camera. 'CaptureRequest' must be extended to hold
these additional physical camera settings.
Test: Manual using camera application,
camera_client_test,
run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Bug: 64691172
Change-Id: Ia38d1e7681a9385be7578c11e40f4e35e9101d75
- Add physical cameraId field in stream structure.
- Override processCaptureRequest due to physicalCameraId change.
- Update 3.3 metadata with logical camera characteristics.
Test: Camera CTS on Taimen, LogicalCamera CTS test on C1
Bug: 64691172
Change-Id: I65bd1ae38381ecb89fae439ae14b813c9bcc3248
Camera devices supporting version 3.4 will be able to receive
session parameters during the stream configuration phase.
Bug: 64450664
Test: Camera CTS
run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --primary-abi-only --module
VtsHalCameraProviderV2_4Target -l INFO
Change-Id: Ifd83bfe0e512fe75b63602b4aba98f4cc1cdeb53
