This will make it easier to swap in and out with the Cuttlefish remote
implementation.
Bug: 331474817
Test: m com.android.hardware.keymint.rust_nonsecure
Change-Id: I0e9a350b62a90ef6126db109195e19b4181d0cf8
Base AIDL definitions for command processing interface. The entry point
to the interface is IHwCryptoOperations.aidl.
Bug: 284152719
Test: qemu android build
Change-Id: Id11b165dac07c9f73be30805f0d611a22fc5f3ff
If HIDL is not supported on the device, don't expect to be able to
register the HIDL service.
Test: atest fmq_test
Bug: 218588089
Change-Id: I1764b26f06ef8f280f719d8ab44db2ebfe562944
The tuner vts will read the system property
ro.vendor.vts_tuner_configuration_variant as the suffix of the config
file to read. Vendor who wants to support multiple region for a single
SoC need to put all VTS config with different suffix as
/vendor/etc/tuner_vts_config_aidl_V1.{suffix}.xml on device.
Bug: 322899156
Test: atest VtsHalTvTunerTargetTest
Change-Id: I1f76d700671c07bc90965fba94f96b8be47198d7
The ISharedSecret.aidl description of the pre-shared secret K
mentioned that K was set up during factory reset. While that could be
done, it is almost never done; most OEMs inject K in the factory.
Removed the reference to setup in factory reset to reduce confusion.
Test: N/A, comment-only change
Change-Id: Idbbd5a8d64197ef4713a75075a9730d06162ad05
error: field `0` is never read
--> hardware/interfaces/security/authgraph/default/src/main.rs:34:24
|
34 | struct HalServiceError(String);
| --------------- ^^^^^^
| |
| field in this struct
|
= note: `HalServiceError` has derived impls for the traits `Clone` and `Debug`, but these are intenti
onally ignored during dead code analysis
= note: `-D dead-code` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(dead_code)]`
help: consider changing the field to be of unit type to suppress this warning while preserving the field
numbering, or remove the field
|
34 | struct HalServiceError(());
| ~~
error: aborting due to 1 previous error
Test: ./build.py --lto thin
bug: http://b/330185853
Change-Id: I08b79176fb5edea9e24990e4884e521c24660d68
Bug: 324321147
Test: Manual -- trigger factory reset, confirm ISecretKeeper.deleteAll()
is being called in Trusty logs.
Change-Id: I0f033b53e83ff549f80271ba4a6ebeabac3db922
This target was using the same `.rc` as the keymint-service target,
though it had a different name.
Bug: 331474817
Test: LOCAL_KEYMINT_PRODUCT_PACKAGE=android.hardware.security.keymint-service.nonsecure m && launch_cvd --noresume --secure_hals=keymint,oemlock
Change-Id: I0f744b75e451f6780d8f6c9bddbd5ea80c579a20
For every request, either requestStreamBuffers fails or
handling of the requested buffer fails, always trigger
the processCaptureResult callback by notifying the request
is ready. This avoids the errors like the service side
receives fewer results than the requests and waits until
timeout.
Bug: 299182874
Test: cts
cts-tradefed run cts \
--include-filter "CtsCameraTestCases android.hardware.camera2.cts.RobustnessTest" \
--include-filter "CtsCameraTestCases android.hardware.camera2.cts.PerformanceTest" \
--include-filter "CtsCameraTestCases android.hardware.camera2.cts.StillCaptureTest" \
--include-filter "CtsCameraTestCases android.hardware.camera2.cts.SurfaceViewPreviewTest" \
--include-filter "CtsCameraTestCases android.hardware.cts.CameraGLTest" \
--include-filter "CtsCameraTestCases android.hardware.cts.LegacyCameraPerformanceTest" \
Merged-in: I86ba422524e79af6b318b50bd6eebe2cb27fa50a
Change-Id: I86ba422524e79af6b318b50bd6eebe2cb27fa50a
After enabling HALL Buffer Management, it requires more careful
error handling and syncing. Process the buffer request error correctly.
Handle the lock and states correctly.
Bug: 299182874
Test: CTS passed, expecially
./cts-tradefed run cts -m CtsCameraTestCases -t android.hardware.camera2.cts.NativeCameraDeviceTest
./cts-tradefed run cts -m CtsCameraTestCases -t android.hardware.camera2.cts.RobustnessTest
Merged-in: I04d8e19a2ee78580e54340378122c724a3de8edb
Change-Id: I04d8e19a2ee78580e54340378122c724a3de8edb
ExternalCameraHAL supports HAL buffer management which means
cameraservice will not send it an output buffer along with the
capture request, and the HAL has the freedom to request an
output buffer when an output buffer is needed.
As a remnant of migration from HIDL to AIDL, the
ExternalCameraHAL still attempted to import buffers that
the cameraservice has sent with the CaptureRequest. However,
with HAL buffer manager enabled, this buffer is always null and
results in the HAL failing to process the capture request.
This CL removes the logic for importing output buffers when
processing capture requests from the cameraservice, and lets
the HAL call requestStreamBuffers when it needs an output buffer.
Bug: 299182874
Test: VTS Tests now pass
Merged-in: I00654836b7ae91a91a2afa4b149712977e07dcc5
Change-Id: I00654836b7ae91a91a2afa4b149712977e07dcc5
native_handle objects created by makeFromAidl need to be deleted
with native_handle_delete. Not doing so leads to a memory leak
every time makeFromAidl is called.
This CL ensures that native_handle_delete is called on the
return value of makeFromAidl wherever it is used.
Bug: 305638723
Test: n/a. No functional change.
Merged-in: Ia99ba6e3abbdf7dec75383450a60c944b92a9c74
Change-Id: Ia99ba6e3abbdf7dec75383450a60c944b92a9c74
