It's reasonable to update the global variable "currentCalls" before
notifying the reader thread. Otherwise this can cause some issues such
as null pointer dereference in other modem.
Bug: 139264227
Test: Don't have devices that uses the corresponding modem that reports
this issues. This is verified according to a partner CL:
https://partner-android-review.googlesource.com/c/platform/hardware/interfaces/+/1422356
Change-Id: Iee9e18149397c39b7c84ec1dc570b9bac7142eb6
Merged-In: Iee9e18149397c39b7c84ec1dc570b9bac7142eb6
(cherry picked from commit fcd55caafd)
Providing non-dds exemption for HAL 1.2 network scan due to some devices
only perform network scan on preferred data sim. Since logical modem
id(0/1) and physical sim slot id(0/1) are intuitively aligned. Set
first sim as dds sim, and skip the network scan on the second one
(non-dds).
Test: Vts
Bug: 135243177
Change-Id: I58b89473714dc6d3ce6567ba1809baad6cd6d799
(cherry picked from commit fc85e8fa50)
After disconnect calls, we want to verify there are no more current calls
by calling IRadio.getCurrenctCalls
Test: run vts
Bug: 138413412
Change-Id: Iacca49abff11fbdfb4ae6dd060a5f150e9e4a74d
Merged-In: Iacca49abff11fbdfb4ae6dd060a5f150e9e4a74d
(cherry picked from commit 5f68117e87)
The whole test case run emergencyDial.RadioHidlTest_v1_4 first and then
come after startNetworkScan.RadioHidlTest_v1_4 test case immediately
(within ~3 secs) the NWscan failure is device in emergency call in
progress/connected while doing emergencyDial.RadioHidlTest_v1_4 test
Although emergencyDial.RadioHidlTest_v1_4 only care about command/response
is successful or not and don't care call is established or not, modem do
care about call condition is in idle/progress/connected state before it
can do NWscan
When there's dedicated channel established, modem can not perform AP
request NWscan in parallel as we are single HW modem restriction.
Test: run vts
Bug: 135595082
Change-Id: Iecba54b93b96d33b57bc59e00f082ff133d2e57b
Merged-In: Iecba54b93b96d33b57bc59e00f082ff133d2e57b
(cherry picked from commit 07a53471c4)
The whole test case run emergencyDial.RadioHidlTest_v1_4 first and then
come after startNetworkScan.RadioHidlTest_v1_4 test case immediately
(within ~3 secs) the NWscan failure is device in emergency call in
progress/connected while doing emergencyDial.RadioHidlTest_v1_4 test
Although emergencyDial.RadioHidlTest_v1_4 only care about command/response
is successful or not and don't care call is established or not, modem do
care about call condition is in idle/progress/connected state before it
can do NWscan
When there's dedicated channel established, modem can not perform AP
request NWscan in parallel as we are single HW modem restriction.
Test: run vts
Bug: 135595082
Change-Id: Iecba54b93b96d33b57bc59e00f082ff133d2e57b
Merged-In: Iecba54b93b96d33b57bc59e00f082ff133d2e57b
For some vendors do not supports independent radios, if
there is one manual search ongoing, another manual search
on other SIM is not supported. So sending stop network scan
request once trigger network scan completed to exclude this
modem limitation.
Bug: 135005200
Test: atest RadioHidlTest_v1_2#startNetworkScan
Change-Id: Iacfd59ac2ad4d44e763ee03697c1f8f57162ce38
This vts enforce IRadioConfig is existed when IRadio service is supported.
We didn't add IRadioConfigV1.2, so in this test IRadioConfigV1.1 will be
checked.
Bug: 132379735
Test: atest VtsHalRadioV1_4TargetTest
Change-Id: I2062ed6b191193d9a8af4f25059fed6cc8dc09d8
Currently tests that check for incremental scan interval
range-checking have incremental scans disabled.
This CL turns on incremental scans for tests where the
invalid interval range checks are being validated.
Bug: 112486807
Test: atest RadioHidlTest_v1_2#startNetworkScan_InvalidPeriodicity1;
atest RadioHidlTest_v1_2#startNetworkScan_InvalidPeriodicity2;
Merged-In: I94874f538d2df70a72913b489d9298f8d1cf9b56
Change-Id: I94874f538d2df70a72913b489d9298f8d1cf9b56
(cherry picked from commit f56b9a41dd)
When incremental results are disabled for network scans,
update the API documentation to allow implementations to
ignore range checking for the incremental scan interval.
Bug: 112486807
Test: compilation - docstring-only change
Merged-In: I901335550b4b8c2cf75f91b39fd031f03ffae982
Change-Id: I901335550b4b8c2cf75f91b39fd031f03ffae982
(cherry picked from commit 944efca78d)
Currently tests that check for incremental scan interval
range-checking have incremental scans disabled.
This CL turns on incremental scans for tests where the
invalid interval range checks are being validated.
Bug: 112486807
Test: atest RadioHidlTest_v1_2#startNetworkScan_InvalidPeriodicity1;
atest RadioHidlTest_v1_2#startNetworkScan_InvalidPeriodicity2;
Change-Id: I94874f538d2df70a72913b489d9298f8d1cf9b56
When incremental results are disabled for network scans,
update the API documentation to allow implementations to
ignore range checking for the incremental scan interval.
Bug: 112486807
Test: compilation - docstring-only change
Change-Id: I901335550b4b8c2cf75f91b39fd031f03ffae982
Change the network scan tests to use the P900 and 850
GSM bands, which are commonly (nearly universally) supported
bands.
Bug: 132076611
Test: atest RadioHidlTest_v1_2
Merged-In: Ia682f022d35c481876c49c9c8802d7c39722be0e
Change-Id: Ia682f022d35c481876c49c9c8802d7c39722be0e
(cherry picked from commit 2ea2a64bc7)
