V4L2 buffer size should fall within a reasonable range
like (0. width*height*2]. Check and return appropriate
status in case the size is not within this range.
Bug: 72261912
Test: Camera CTS
Change-Id: I1945dc734afb552ecb8d4ef74c9198eca8ce00e7
Make sure that num_physcam_metadata, physcam_ids, and physcam_metadata
returned from process_capture_result is sane.
Test: LogicalCameraDeviceTest
Bug: 77218595
Change-Id: Ic4d9823569fb86b20ab2ab21edfc32a0e9f5c9c7
When calling update-makefiles.sh there are
some unrelated changes that were missed in
previous commits.
Bug: 8675309
Test: compilation
Change-Id: I5bf67fbcc809de36bde1869ada7b835566a5198b
This allows camera devices to correct geometric distortion in their
optics, when requested by the application.
The correction only applies to processed (YUV, JPEG, etc) outputs,
not RAW buffers, or the result metadata.
Test: New CTS test passes
Bug: 74434422
Change-Id: I3b4807b08399e9ab18f4b20e3029fc16be662f5b
LENS_RADIAL_DISTORTION is inconsistently defined: in some places, it
is documented to operate on the range [-1...1], and in others, on a
range dependent on the camera lens's intrinsic calibration and focal
length.
Since fixing just the definition will not fix any existing devices
that define this value, deprecate the old key and add a new consistent
one to make sure applications only reference the consistent
definition.
Test: Adjusted camera CTS passes
Bug: 74641761
Change-Id: Icefa3150a5804de264f9e0e98982d038b4dcdb70
Camera provider types should not be limited to a particular set
of pre-defined values. All providers will be treated equally
by camera framework regardless of their specific type.
Bug: 73738052
Test: run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I379c015d9e2fc4f68a7ad3ae7cd92b9d230dea33
1. Add EXIF MAKE/MODEL tag
2. Add retry loop for V4L2 open failure
3. Do not add external camera if ExternalCameraDevice cannot be
initialized
Bug: 72261912
Bug: 72569850
Change-Id: I06df1fbbb4afabea1a9a74aca9e288b24966cb0b
If HAL calls process_capture_result with invalid buffers, the HIDL
wrapper shouldn't forward it to camera service, since the CaptureResult
structure may not be completely initialized.
Test: Run GoogleCamera
Bug: 74433802
Change-Id: Iaf20b542af5b11ffbedf709e99137b69d77a9ad3
Also update default external camera config to prevent
over promising peformance on lower end devices.
Test: API2 CTS tests except RecordingTest
Bug: 72261744
Change-Id: I20310606520099abf0f5173690f4aaf56a3e52a9
1. Update the FPS range to list (0.5*fps, fps) only
as webcams tends to skip a lot of frames and not
able to output at stable framerate.
2. Exif: don't expect focal length to present
3. Thumbnail: allow 0x0 size for no thumbnail output
4. Allow retry some ioctl during configureStream as
some webcams seems having problem in quick close
reopen operation.
Test: CTS CameraTest
Bug: 72261912
Change-Id: Ic23b7fb293b7579694c59240e854d750c842886d
V4L2 doesn't seem to allow changing fps at runtime, so we need to
wait until pipeline is idle and reconfigure V4L2 streams.
Also update the fps filtering logic to make sure supported fps
are consistent as long as the major dimension is the same.
Ex: for 4:3 webcams, all 1280*N sizes has the same fps set, or
for 16:9 webcams, all N*720 sizes has the same fps set.
Bug: 72261912
Change-Id: I534f09bebadb2f532a030a841633a8be7d3a87cc
In the profile we notice that SortedVectorImpl::_indexOrderOf is
almost 1.6% which is quite high considering it is an access to
a container. We make mTagToNameMap as a std::unordered_map
to store the Tag and the types. The accesses would be in constant time.
This change removes this from the profile and give ~10% improvement.
Bug: 72526772
Change-Id: Iffd244febd093bdfec9fe4d5e846a0e59c0ecdce
Also remove the length check for getCameraIdList as external
camera providers are supposed to report 0 there.
Test: atest VtsHalCameraProviderV2_4Target (on marlin)
Bug: 69473913
Change-Id: I9059a699a6c46a3aac76454e7e8673d2539d0fa1
A test is needed which will generate a burst request
that contains alternating sensor sensitiviry values.
The corresponding results need to be verified accordingly.
Bug: 37533777
Test: run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I58ccb645b83c48ba3360aae5ad44036ce213964d
Simplify the API for the P release
- Remove new templates
- Update docs
- Also update some metadata docs from prior changes
Test: Revised Camera CTS passes
Bug: 63629224
Change-Id: I47fb170052cf6062955278ace624a91e8a0078b3
Empty individual physical settings should be allowed after
one initial successful request.
Bug: 72524845
Test: run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I18d22a56f5f0e6e1d81a6e8c844697c02bc343a1
Release fence close was handled by freeReleaseFences so
hidl_handle should not own the native handle.
Test: running external camera on marlin
Bug: 64874137
Change-Id: I68e76d31985380eb3c502276df07d3648f67b6f1
Individual physical camera requests should only be allowed
in case the respective physical Ids are among the last
configured Hal streams.
Bug: 72524603
Test: run vts --skip-all-system-status-check --skip-preconditions
--primary-abi-only --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: Ia5715398f74f03528d7fe2e52e5b9e32ad654a2c
