This test was developed after Android U was cut, and it assumes
the new way of encoding of the remote submix device type.
Bug: 300181540
Test: run `atest VtsHalAudioCoreTargetTest` on UDC GSI
Change-Id: If53f92a55734e18a2acce6c790f9e5e259246684
When external device is about to disconnect, the audio framework will
notify the HAL module about the coming device disconnection so that the
HAL module could abort any active read/write operations on drivers to
avoid problems with the HW interfaces.
Bug: 279824103
Test: atest VtsHalAudioCoreModuleTargetTest
Change-Id: I9f960b8ae5df11a764e70bd63f98c0f8b8386c34
Merged-In: I9f960b8ae5df11a764e70bd63f98c0f8b8386c34
The proper way to obtain the minimum buffer size when
opening a stream is to retrieve it from the patch. Thus,
a patch must be established prior to opening a stream.
This step was often skipped by VTS tests, they were
providing a fixed stream buffer size which might not
work for all HAL module implementations.
Created a helper class `StreamFixture` which handles
all necessary steps for opening a stream. Overhauled
tests to use this class.
Also, remove special treatment of remote submix devices
by ModuleConfig.
Bug: 300735639
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ic51d603d2bb8ff0fd62434bd16fc02c51326fc42
The implementation had duplicated code in 'transfer', which already
present in 'outWrite'.
Cleaned up delay calculations and logging.
Fixed the VTS to send 'prepareToClose' before attempting to join
the worker. Otherwise, the worker could be stuck on a blocking
operation due to inactivity of the other party and join would never
happen.
Bug: 302132812
Test: atest VtsHalAudioCoreTargetTest --test-filter="*AudioModuleRemoteSubmix*"
Change-Id: Id8455eb12d1d2999dc0bc7b64f0d70a61a177598
Add Execution listener in VTS tests to get information
about test execution steps like, start, stop and failure messages
in logcat message.
Bug: 287168985
Test: run vts-hal-audio
Change-Id: Ie69a7bf78076c17d7b623d75748fa0fdbdba6b1e
Some device ports are connected via ADSP which takes care
of the actual audio configuration (format, channels, SR),
for example the built-in speaker and mic ports, as well
as some external devices like analog headsets.
In the legacy implementation, such device ports did not have
any profiles specified. Allow the same behavior in the AIDL
implementation. To ensure correctness, device ports with no
profiles must be routable to mix ports that have profiles
specified. This requirement is fulfilled in legacy configs.
Bug: 266124463
Test: atest VtsHalAudioCoreTargetTest
Test: atest audiosystem_tests audiorouting_tests
Test: atest CtsMediaAudioTestCases
Change-Id: Iaccd1e8ef2a5af9a5f8bae453905d01c6b7fdc28
The code for updating the existing patch did not modify
the patch stored in the module's list of patches.
Added a test which switches the patch to another port
config and validates that 'Module.getAudioPatches' returns
the updated patch.
Bug: 302573756
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I0e3412b9387cd451436a48af116dc5a940d868cf
When there are no device ports supporting MMAP,
Module::getMmapPolicyInfos have to return 'Policy::NEVER'
so that the AAudio code does not attempt to use
the AAudio service. This aligns with the use of sysprops
by the HIDL implementation.
Update AudioCoreModule#GetMmapPolicyInfos test to use
the same logic for determining MMAP support as the framework
uses.
This makes CtsNativeMediaAAudioTest cases passing with
the AIDL HAL on Cuttlefish.
Bug: 302049825
Test: atest VtsHalAudioCoreTargetTest
Test: atest CtsNativeMediaAAudioTest [w/AIDL enabled on CF]
Change-Id: Ie58c408f6f648a8a03b6a5d92118b90061389c50
Point-to-point connections (analog, HDMI, SPDIF) do not use
a device address. Reflect that in `GenerateUniqueDeviceAddress`.
Add an analog headset into the test configuration.
Bug: 300648357
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Id1d0b1b60df40c2474fe3151067152b8e0a261c3
A mix port can be patched to multiple connected device ports. Thus, when
disconnecting an external device and removing the connected port, the
profiles of the mix port can only be cleared iff there are no more
connected device ports patched to it, and it did not have profiles prior to
connection of the first device.
Enhanced VTS tests to catch this problem in the HAL implementations. Also,
ensure that audio ports and audio routes do not change after the test
finishes. This ensures that tests can't affect each other.
Bug: 298175108
Test: atest audiosystem_tests
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ia666b874958fb260513fc2b8cd20a823953ec679
- remove the default address "0" for IN_SUBMIX and OUT_SUBMIX;
- remove the profiles in the device port and assign profiles when
connecting;
- make remote submix input to use "virtual" connection type,
same as the output;
- fix ModuleConfig in VTS to avoid returning devices with virtual
connections as "external devices" because they can actually
be connected even when connection simulation is disabled;
- fix TryConnectMissingDevice VTS test to disconnect the device
if the operation has unexpectedly succeeded.
Bug: 286914845
Bug: 294976817
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ife11c9c356d1b5dc587d08cef47294e3b29f65c5
Core HAL changes:
1. Add StreamPrimary implemented via StreamAlsa.
2. Align the configuration with the HIDL HAL.
3. Fix position retrieval vs. standby call.
4. Fix sleeps in StreamAlsa.
VTS changes:
1. Use several bursts for stream I/O test scenarios that check
observable position increase. This is because the position may
not be available until a couple of transfers have been made.
2. Do not require position increase for the scenarios that do
not make several bursts. As specified above, the position may
not have been increased for the ALSA case. Whereas, using
multiple bursts in all scenarios will increase test time, and
make the state machine transitions graph more complicated.
3. Hook up the test config file to shut down audioserver during
VTS tests, fix the test config file.
Bug: 286914845
Test: atest VtsHalAudioCoreTargetTest
Test: compare APM dumps for AIDL vs. HIDL
Change-Id: I85271564c664fa40008d60e82b32eaa66a99c68f
Plumb propagation of errors reported by the implementations
of DriverInterface::setConnectedDevices up to the Module.
This allows returning the reported errors from the corresponding
IModule interface methods. Implement handling of errors
from connection state update by the Module implementation.
When updating streams about the connection status
ensure that the list of connected devices is not empty.
Also, add an extra check to AudioStreamIn#ActiveMicrophones
to validate the size of the returned active microphones
list.
Bug: 282568751
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I62a422d95c37a672fce4ad221bea435cc7b4ebfa
Clarify what should happen to mix port profiles after
connection of an external device. Add a test to verify
this behavior.
Also, add an XML file for the test runner for
VtsHalAudioCoreTargetTest.
Bug: 273252382
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I3381dd29c5922bf31fa3a8ae6fa273597e8333a1
Merged-In: I3381dd29c5922bf31fa3a8ae6fa273597e8333a1
Add 'isDefaultAudioFormat' to Utils.h.
Print the module type in 'setModuleDebug'.
Align 'suggestDeviceAddressTag' with framework code.
Bug: 273252382
Test: m
Change-Id: I0248d2e866522a63a745d4af6132b7d2b6a01564
Merged-In: I0248d2e866522a63a745d4af6132b7d2b6a01564
Clarify what should happen to mix port profiles after
connection of an external device. Add a test to verify
this behavior.
Also, add an XML file for the test runner for
VtsHalAudioCoreTargetTest.
Bug: 273252382
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I3381dd29c5922bf31fa3a8ae6fa273597e8333a1
Add 'isDefaultAudioFormat' to Utils.h.
Print the module type in 'setModuleDebug'.
Align 'suggestDeviceAddressTag' with framework code.
Bug: 273252382
Test: m
Change-Id: I0248d2e866522a63a745d4af6132b7d2b6a01564
RS2 represents an interval of power levels. This is why it is clearer to
specify upper bound in the naming to make it clear that we refer to the
upper limit which when exceeded will trigger a momentary exposure.
Test: atest VtsHalAudioCoreTargetTest
Bug: 273961110
Change-Id: If4e065deeedb32c3e5e81caf4cd6924fb5815dc0
Merged-In: If4e065deeedb32c3e5e81caf4cd6924fb5815dc0
RS2 represents an interval of power levels. This is why it is clearer to
specify upper bound in the naming to make it clear that we refer to the
upper limit which when exceeded will trigger a momentary exposure.
Test: atest VtsHalAudioCoreTargetTest
Bug: 273961110
Change-Id: If4e065deeedb32c3e5e81caf4cd6924fb5815dc0
Since BT LE can also have offloaded codecs, it might need
a reconfiguration event similar to the one that BT A2DP
receives.
Bug: 272658632
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I04fb7c99f0457f87e1f4aaf7e77165317163387b
These utilities are for types generated from AIDL. Since
the types end up in the 'aidl' namespace (NDK backend), it makes
sense to keep the utilities in the same namespace.
While changing the namespace, I've found numerous useless
includes of 'Utils.h' and removing them, also reorganizing
lists of includes along the way to match the style guide.
Bug: 205884982
Test: m
Test: atest --test-mapping hardware/interfaces/audio/aidl/TEST_MAPPING
Change-Id: Ib23b47092364046f632f9503b92b9baff5b902f5
Similar to IBluetooth and IBluetoothA2dp interfaces,
IBluetoothLe controls the LE profile. This interface
replaces the following string parameter:
"LeAudioSuspended"
Bug: 270731693
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I9df28053cd270fc2d446ba9a8ada4dd6ab761c7b
Merged-In: I9df28053cd270fc2d446ba9a8ada4dd6ab761c7b
This method is needed to implement HAL modules that
are proxies for other subsystems, for example
the "bluetooth" and "r_submix" modules. This method
replaces string parameters "exiting=1" and "closing=true"
which the framework sends to streams prior to closing
them in order to unblock the I/O thread of the stream.
Bug: 270731693
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I3d13fe34535ab853c9f8237a08c31cdafadbb390
Merged-In: I3d13fe34535ab853c9f8237a08c31cdafadbb390
Similar to IBluetooth interface which controls SCO/HFP,
IBluetoothA2dp controls the A2DP profile. This interface
replaces the following string parameters:
AUDIO_PARAMETER_A2DP_RECONFIG_SUPPORTED
AUDIO_PARAMETER_RECONFIG_A2DP
"A2dpSuspended"
Also, refactor fields used by Module implementation
for persistent child interfaces.
Bug: 270731693
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ie62952c3bc3af2f53535d716e5b57bf48c661306
Merged-In: Ie62952c3bc3af2f53535d716e5b57bf48c661306
AudioOffloadMetadata contains the same information
as 'AUDIO_OFFLOAD_CODEC_*' framework parameters.
It is updated via a new method IStreamOut.updateOffloadMetadata
which only works for compressed offload streams.
Bug: 270731693
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I6c8a8853f216438284082f79e3f57e511a2a1f06
Merged-In: I6c8a8853f216438284082f79e3f57e511a2a1f06
The client can pass the I/O handle to the HAL as part of
the requested audio port config. The HAL can store that handle
and use it as a cookie to match the port config with other HALs
(for example, SoundTrigger).
Updated behavior of IModule.setAudioPortConfig to copy
the handle for mix ports, and pass it back with the applied
config. Enforced this behavior in VTS.
Bug: 269551518
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ibc3f9eea4169610f1680937c764de42b4fe5194a
When generating an address for an external device, consider
the connection type and choose the appropriate variant of
the AudioDeviceAddress struct.
Bug: 205884982
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ic791ba7de80e482c7e721e082fc9678f0f564b62
These parcelables are also used by the framework.
Bug: 263964254
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ib30b69c325040e474fb58a8e7e515912fccab4c7
Merged-In: Ib30b69c325040e474fb58a8e7e515912fccab4c7
Add interfaces to query aaudio hardware information. The new interfaces
are supposed to replace the system properties. The information includes
aaudio mixer burst count and aaudio hardware burst minimum usec.
Bug: 193275465
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Id3442dae15937baba84f053f2e244bc294f4d718
In tests that do not request and activate simulation of
connection of external devices, limit the mix port query to
return ports that can be routed to attached device ports only.
Bug: 205884982
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I7e77b269c07b763a5080f42ebf7ec7d0fcaee195
Add API to query if the Module supports control of variable latency over
playback paths.
Bug: 197823000
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I3a08d682a1a639d8373869725e12702fff962d53
