Fix the issue with retrieving BluetoothA2dp and BluetoothLe
instances access.
In 'Module::connectExternalDevice', always call
'populateConnectedDevicePort' to allow the module implementation
to cancel device connection.
Move frame count calculation into Utils.
Clean up includes and 'using' directives.
Bug: 302132812
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I22f65b8bcdcdd9bcd67a8290520eb4a465d4c720
The latency figure depends on the module implementation.
Instead of using a hardcoded value, each module should be
able to specify its own value. This value is then used
for calculating the minimum buffer size.
Set the nominal latency of the primary (CF) module to a high
value since the virtual device implementation fails CTS tests
if it attempts to pretend that it provides low latency.
Bug: 302132812
Test: atest CtsMediaAudioTestCases --test-filter=".*AudioTrackTest.*"
Test: atest CtsMediaAudioTestCases --test-filter=".*AudioRecordTest.*"
Change-Id: I8ce9f230378eea787c9b3c7ce3660c1e4e7bc895
The implementation had duplicated code in 'transfer', which already
present in 'outWrite'.
Cleaned up delay calculations and logging.
Fixed the VTS to send 'prepareToClose' before attempting to join
the worker. Otherwise, the worker could be stuck on a blocking
operation due to inactivity of the other party and join would never
happen.
Bug: 302132812
Test: atest VtsHalAudioCoreTargetTest --test-filter="*AudioModuleRemoteSubmix*"
Change-Id: Id8455eb12d1d2999dc0bc7b64f0d70a61a177598
** Partial upstream of ag/24854732. Only the interface part is
** included.
This should enable the sound dose gts on cuttlefish devices. The sound
dose HAL uses the internal MelProcessor to compute the MELs which are
reported to the framework.
Test: atest GtsAudioTestCases:SoundDoseTest
Bug: 301527435
Change-Id: Ifc505a0171bc8b4d3f5cf65d950fa5c0f812087f
Merged-In: Ifc505a0171bc8b4d3f5cf65d950fa5c0f812087f
For external (non-attached) device ports that have dynamic
profiles, 'connectedProfiles' must be provided. They are
used when 'ModuleDebug.simulateDeviceConnections' is enabled.
Bug: 205884982
Test: atest VtsHalAudioCoreTargetTest
(cherry picked from commit a29393db39)
Change-Id: I69707d610c34f8f1eae9ef81768b76c40e985c0f
Added a virtual method Module::getMicrophoneInfos
so that vendor implementations can provide actual
data about device microphones. This information
is not part of the APM config file.
Bug: 205884982
Test: atest VtsHalAudioCoreTargetTestTest
(cherry picked from commit dc9d1a4b42)
Change-Id: I3ea9ba8da79fd29f8d69c5a575a57851d73df7b8
The default implementation now loads the HAL configuration
from the legacy XML configuration file which was previously
consumed by the framework directly.
Note that errors in the config file will lead to crash
of the XML parser, pointing out to the source of the problem.
IMPORTANT NOTES:
- Never use untested legacy config files with production
devices.
- Make sure that all possible configurations (for example,
BT offload on/off) are tested.
Bug: 205884982
Test: atest VtsHalAudioCoreTargetTest
(cherry picked from commit 00a7307862)
Change-Id: Id1002cb065e7cc19bdd520aca15b3fe5d39e5853
For external (non-attached) device ports that have dynamic
profiles, 'connectedProfiles' must be provided. They are
used when 'ModuleDebug.simulateDeviceConnections' is enabled.
Bug: 205884982
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ic82e47abc50e2958ed93f5d4d18082b569ecb67b
Added a virtual method Module::getMicrophoneInfos
so that vendor implementations can provide actual
data about device microphones. This information
is not part of the APM config file.
Bug: 205884982
Test: atest VtsHalAudioCoreTargetTestTest
Change-Id: I4b650ae221ba866421bbf8500ad8c17f04bc4aa7
The default implementation now loads the HAL configuration
from the legacy XML configuration file which was previously
consumed by the framework directly.
Note that errors in the config file will lead to crash
of the XML parser, pointing out to the source of the problem.
IMPORTANT NOTES:
- Never use untested legacy config files with production
devices.
- Make sure that all possible configurations (for example,
BT offload on/off) are tested.
Bug: 205884982
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I01e4cd77a284d7df64ecb0c0b21cb16abfa0f6c5
Some device ports are connected via ADSP which takes care
of the actual audio configuration (format, channels, SR),
for example the built-in speaker and mic ports, as well
as some external devices like analog headsets.
In the legacy implementation, such device ports did not have
any profiles specified. Allow the same behavior in the AIDL
implementation. To ensure correctness, device ports with no
profiles must be routable to mix ports that have profiles
specified. This requirement is fulfilled in legacy configs.
Bug: 266124463
Test: atest VtsHalAudioCoreTargetTest
Test: atest audiosystem_tests audiorouting_tests
Test: atest CtsMediaAudioTestCases
Change-Id: Iaccd1e8ef2a5af9a5f8bae453905d01c6b7fdc28
This should enable the sound dose gts on cuttlefish devices. The sound
dose HAL uses the internal MelProcessor to compute the MELs which are
reported to the framework.
Test: atest GtsAudioTestCases:SoundDoseTest
Bug: 301527435
Change-Id: Ifc505a0171bc8b4d3f5cf65d950fa5c0f812087f
A mix port can be patched to multiple connected device ports. Thus, when
disconnecting an external device and removing the connected port, the
profiles of the mix port can only be cleared iff there are no more
connected device ports patched to it, and it did not have profiles prior to
connection of the first device.
Enhanced VTS tests to catch this problem in the HAL implementations. Also,
ensure that audio ports and audio routes do not change after the test
finishes. This ensures that tests can't affect each other.
Bug: 298175108
Test: atest audiosystem_tests
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ia666b874958fb260513fc2b8cd20a823953ec679
In rare cases, a worker thread from a new stream created
via StreamSwitcher can read again from the command FMQ
the "exit" command which was sent to the worker of
the previous stream.
The underlying reason for that has to be investigated.
For now, mitigate the issue by salting the cookie of
the "exit" command with the worker's TID.
Bug: 300130515
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ie7d2e847e8b39414ffd31afd64e32d4c9a292c03
In the case when there is a problem with the legacy APM XML file,
the converter provides a default surround sound config. However,
the default implementation of IConfig::getSurroundSoundConfig did
not take an advantage of that, and was returning an empty config,
which is not accepted by VTS.
Also, improve logging messages: clarify the situation when no readable
audio policy XML file found, and use outer functions name for lambdas.
Bug: 293978054
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Iae069a0498009605ef5ededb9c9112efab08548a
- remove the default address "0" for IN_SUBMIX and OUT_SUBMIX;
- remove the profiles in the device port and assign profiles when
connecting;
- make remote submix input to use "virtual" connection type,
same as the output;
- fix ModuleConfig in VTS to avoid returning devices with virtual
connections as "external devices" because they can actually
be connected even when connection simulation is disabled;
- fix TryConnectMissingDevice VTS test to disconnect the device
if the operation has unexpectedly succeeded.
Bug: 286914845
Bug: 294976817
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ife11c9c356d1b5dc587d08cef47294e3b29f65c5
Change audio worker threads priority to ..._URGENT_AUDIO to match
the coupled thread in the audio flinger.
Set SCHED_FIFO scheduler for FAST threads (also to match AF fast
mixer/capture threads). In order to enable that, grand SYS_NICE
capability to the HAL service process and provide "getTid"
function in the StreamWorker class. For testing, add a "FAST"
output to the "stub" module in the HAL configuration.
Bug: 286914845
Test: atest libaudioaidlcommon_test
Test: atest VtsHalAudioCoreTargetTest
Test: adb shell ps -A -T -o PID,TID,NI,PCY,PRI,RTPRIO,SCHED,CMD
for the HAL service process during VTS test. For regular
"reader"/"writer" threads should see 'NI 19, PRI 38',
for FAST "writer" should see 'NI -19, PRI 43, RTPRIO 3, SCH 1'
Change-Id: Iab7e21ebc139ff11cf9b7f4a1645960db8dadd43
Core HAL changes:
1. Add StreamPrimary implemented via StreamAlsa.
2. Align the configuration with the HIDL HAL.
3. Fix position retrieval vs. standby call.
4. Fix sleeps in StreamAlsa.
VTS changes:
1. Use several bursts for stream I/O test scenarios that check
observable position increase. This is because the position may
not be available until a couple of transfers have been made.
2. Do not require position increase for the scenarios that do
not make several bursts. As specified above, the position may
not have been increased for the ALSA case. Whereas, using
multiple bursts in all scenarios will increase test time, and
make the state machine transitions graph more complicated.
3. Hook up the test config file to shut down audioserver during
VTS tests, fix the test config file.
Bug: 286914845
Test: atest VtsHalAudioCoreTargetTest
Test: compare APM dumps for AIDL vs. HIDL
Change-Id: I85271564c664fa40008d60e82b32eaa66a99c68f
Rename DriverInterface::getPosition -> refinePosition. This reflects
the fact that the driver may provide more precise position, however
this is an optional operation.
Rename StreamIn/Out::mContext -> mContextInstance. This is
to emphasize that StreamIn/Out actually own the context and they
hold the real context instance, not just a reference/pointer
to it, like other classes involved in the inheritance chain.
Bug: 286914845
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Id7159f9bf3ee020dc7cf594ec35f5d59d23d7e31
Use stream switcher to obtain device address for creation
of a remote submix stream.
Bug: 286914845
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I8dde3d59e488c9621dce78ffd5249254ecfc0b1a
Since in the C and HIDL APIs the method for opening a stream
receives the device to connect to, some legacy HAL implementations
took an advantage of that. In AIDL APIs device port connection
process is more dynamic and independent of the stream creation.
To simplify porting of legacy implementations to AIDL, a helper
class StreamSwitcher is added. It emulates the legacy behavior
by allowing to postpone the stream implementation creation until
the connected device is known. Until that moment, it exposes
to the client a stub implementation of the stream interface.
Bug: 264712385
Bug: 286914845
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ie8ae0338fd22f705e00a34e56a7fa235eda5ed9e
Moving frame counter to the StreamContext class enables
switching stream drivers on the fly while keeping the frame
count monotonically increasing.
StreamWorkerCommonLogic now holds a pointer to StreamContext,
which makes redundant storing copies of the fields of the latter.
Bug: 264712385
Test: atest VtsHalAudioCoreTargetTest
Change-Id: If6716f4051c484b52927cbfe4032df7c907eb3a5
Since the client may end up never retrieving the interface
instance for sending it over Binder, postpone setting
of the scheduler policy to until that very moment.
Rename 'ChildInterface::getPtr' to 'getInstance' for clarity.
Bug: 264712385
Test: atest VtsHalAudioCoreTargetTest
Change-Id: I31f9dd832c7f85f9632d1d389a8b1063d237d4c1
* changes:
audio: Move StreamContext ownership out from StreamCommonImpl
audio: Use ChildInterface in StreamCommonImpl
audio: Update StreamAlsa and alsa utils for built-in devices
audio: Simplify and extend alsa::Mixer
Upcoming implementations of the streams of the primary module
will need to change the underlying stream type depending on
the current connected device. The stream context must persist,
thus its life time must be bound to the IStreamIn/Out implementation.
Move the StreamContext instance under ownership of StreamIn/Out.
Add StreamCommonImpl::onClose so that the owner of the context
may know when it is safe to reset it.
Re-arrange the order of the arguments when creating a stream
so that the context always comes first.
Bug: 264712385
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Iaf13d4bc3a53cbfc27264d3abd1f6c417ece3941
Replace the pair of 'shared_ptr<>, Binder' with
the equivalent ChildInterface.
Fix logging of returned sub-objects to print their
Binder value instead of the local pointer.
Bug: 264712385
Test: m
Change-Id: I1350e7b3720c6244cd8527e1d021ee9577399291
Use new functions added to alsa proxy layer for opening
attached (built-in) devices.
Bug: 264712385
Test: atest VtsHalAudioCoreTargetTest
Change-Id: Ia2a47ff96fa62f99ce4ec4a0993ca3fd86f82c9d
