Now updated in prepareForProcessing(), which avoids race
with close().
Test: atest AudioEffectTest
Test: Run spatial audio
Test: adb shell 'uclampset -a -p $(pgrep -of android.hardware.audio.service)'
Bug: 265055114
Change-Id: I31de38d54aa42d7ae3cc87d0afc4a410fc3336ad
The fix in https://r.android.com/2322475 modifies the device
address, which becomes 'IN_DEFAULT' for the telephony case.
As a result, tests that verify capture position were not
skipped, and they do fail on certain platforms when there is
no active telephone call. The fix is to use the initial device
type which was passed to the test as a parameter, not the adjusted
one.
Bug: 263305254
Test: atest VtsHalAudioV7_0TargetTest
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: Ied7134a1bd97e70dcc2400e0827810f9d71a6438
(cherry picked from commit 7029707e34)
Use setMinSchedulerPolicy to enforce minimum thread priority
when accessing the audio HAL to ANDROID_PRIORITY_AUDIO
Test: instrumented
Bug: 261496726
Change-Id: I700b04d3060e9405b1445206882a6131cea0d045
This undoes the change which had happened unintentionally in
https://cs.android.com/android/_/android/platform/hardware/ \
interfaces/+/1e703f182e2fcbb9123bf661d81d22a04d0e1f8d
The device type passed to 'openInputStream' for telephony
devices should be 'AUDIO_DEVICE_IN_DEFAULT'
Bug: 259636577
Test: atest VtsHalAudioV7_0TargetTest
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: Ic8f4367961346b87087c885a3cdaccab3c1407c9
(cherry picked from commit d72b42d769)
Increase data position based on the HAL consumption of data,
on the production by the test.
Bug: 254806348
Test: atest VtsHalAudioV7_1TargetTest:CompressedOffloadOutputStream/CompressedOffloadOutputStreamTest
Change-Id: I33a86ec62662ba4738c70c15b77ece0135da7d29
(cherry picked from commit bae409f6c6)
The audio_policy_engine_configuration.xsd schema was missing
four values for the usage enum. This was causing the VTS
test to fail. These usages must be specified in the audio
policy engine configuration file, otherwise a GTS test fails.
Bug: 245303963
Bug: 246231268
Bug: 246901091
Test: atest VtsHalAudioPolicyV1_0TargetTest
Change-Id: I0161ddb33e52cbca9b425c0cbb4f32f320c43af4
(cherry picked from commit 1cbe492d59)
Merged-In: I0161ddb33e52cbca9b425c0cbb4f32f320c43af4
The size of the feature config needs to be limited
by the Binder transaction size. This check is enforced
before calling into legacy C API.
Also, fixed invalid calculation of buffer size
in Effect::getSupportedConfigsImpl.
Bug: 240266798
Test: atest VtsHalAudioEffectV7_0TargetTest
Change-Id: I1a1f7931a07e28642967fa68d9a358429138db29
The VTS test AudioEffectHidlTest#GetParameterInvalidMaxReplySize
should only run for new devices launching on T+ because
older vendor images do not have updated HAL default wrapper
code and thus will fail.
Bug: 237291425
Bug: 240932876
Test: atest VtsHalAudioEffectV7_0TargetTest:Equalizer_IEffect/AudioEffectHidlTest#GetParameterInvalidMaxReplySize/0_default
Change-Id: I1697155fe7781cbc96c1913e674699e299aa26b3
Do not rely on blocking behavior of 'IStreamOut.write',
instead use stream callbacks. Measure the time between
write start and drain complete. This makes the test
working reliably across different chipsets.
Bug: 219767875
Test: atest VtsHalAudioV7_0TargetTest:CompressedOffloadOutputStream/CompressedOffloadOutputStreamTest
Test: atest VtsHalAudioV7_1TargetTest:CompressedOffloadOutputStream/CompressedOffloadOutputStreamTest
Change-Id: I26fd4fd26914ed2a0b3273f4ae5512a87f9cca2c
Merged-In: I26fd4fd26914ed2a0b3273f4ae5512a87f9cca2c
(cherry picked from commit a0a5d4a9f6)
Update CompressedOffloadOutputStream to fail the test if
compressed offload mix port does not support gapless offload
for a new device launching on T+.
Bug: 219767875
Test: atest VtsHalAudioV7_0TargetTest
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: Iaadf6e9b9bb7340ccaf5bc26c45fda9654190510
Merged-In: Iaadf6e9b9bb7340ccaf5bc26c45fda9654190510
(cherry picked from commit 1bc0dc4ceb)
Two changes that are necessary to test offloaded output:
1. Pass all mix port flags specified in the config to HAL when
opening an output stream. Previously the generator was
omitting the 'NON_BLOCKING' flag, however it is necessary
for offloaded output to work. This also now passes
the 'GAPLESS_OFFLOAD' flag to the stream opening call site.
2. Provide the DeviceAddress of the attached source/sink
device to tests that use mix ports. Some tests were looking
up the device address anyway. Also, HAL implementations
seem to prefer to have the actual output device instead
of 'DEFAULT' when opening offload streams.
Bug: 219767875
Test: atest VtsHalAudioV7_0TargetTest
Test: atest VtsHalAudioV7_1TargetTest
Test: atest HalAudioV7_0GeneratorTest
Change-Id: I0482376ecc7d6964f45f508a80716ffab18044b4
Merged-In: I0482376ecc7d6964f45f508a80716ffab18044b4
(cherry picked from commit 713d2c5590)
By convention, the size of the resulting effect_param_t
can not exceed EFFECT_PARAM_SIZE_MAX. This checks needs
to be enforced when converting from HIDL arguments
into legacy C API structures.
Bug: 237291425
Test: atest VtsHalAudioEffectV7_0TargetTest
Change-Id: Ie92f62b002dc622fa8246139c3d956909670fdb6
The number of audio profile and extra audio descriptor must not be
greater than the maximum value.
Bug: 237288416
Bug: 237717857
Test: repo step in bug
Test: atest android.hardware.audio.common@7.0-util_tests
Change-Id: I1fcfa29d7841a1cb73bafb1ea92f3b1630992ae9
Merged-In: I1fcfa29d7841a1cb73bafb1ea92f3b1630992ae9
(cherry picked from commit 0ee75ca925)
There was a proposal for a backward-compatible XML schema change
(https://android-review.googlesource.com/q/I1bf31c6bf6c57c9b79f0d5751601aa77780f1f80)
which had a mistake. Express the change correctly to match
the implementation.
Bug: 231929160
Test: atest VtsHalAudioPolicyV1_0TargetTest
Change-Id: Id581e290740a3c00ba3719a339c9bc47d730f35c
(cherry picked from commit 356bb458dc)
Merged-In: Id581e290740a3c00ba3719a339c9bc47d730f35c
There was a proposal for a backward-compatible XML schema change
(https://android-review.googlesource.com/q/I1bf31c6bf6c57c9b79f0d5751601aa77780f1f80)
which had a mistake. Express the change correctly to match
the implementation.
Bug: 231929160
Test: atest VtsHalAudioPolicyV1_0TargetTest
Change-Id: Id581e290740a3c00ba3719a339c9bc47d730f35c
Merged-In: Id581e290740a3c00ba3719a339c9bc47d730f35c
(cherry picked from commit e01186e117)
When opening a stream on an ultrasound input
(AUDIO_INPUT_FLAG_ULTRASOUND), the source type
AUDIO_SOURCE_ULTRASOUND must be used.
Bug: 231275185
Test: atest VtsHalAudioV7_0TargetTest
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: Ib1fb5b8218eb0c52edf31789fa937c0a8b6c5082
Merged-In: Ib1fb5b8218eb0c52edf31789fa937c0a8b6c5082
(cherry picked from commit 1ce9d5488a)
TV devices can list a lot of configurations and have low
performing CPUs which causes the test to run for a significant
amount of time. From b/229824670 it seems that 10 minutes
should be enough.
Bug: 229824670
Test: atest VtsHalAudioV6_0TargetTest
Test: atest VtsHalAudioV7_0TargetTest
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: Id7fa8eaa98bf2437fd1f676b9e5a7290df260fbd
(cherry picked from commit 0b9b03eb71)
Merged-In: Id7fa8eaa98bf2437fd1f676b9e5a7290df260fbd
TV devices can list a lot of configurations and have low
performing CPUs which causes the test to run for a significant
amount of time. From b/229824670 it seems that 10 minutes
should be enough.
Bug: 229824670
Test: atest VtsHalAudioV6_0TargetTest
Test: atest VtsHalAudioV7_0TargetTest
Change-Id: Id7fa8eaa98bf2437fd1f676b9e5a7290df260fbd
(cherry picked from commit 0b9b03eb71)
As part of the AIDL API freeze for TM, the V1 of
android.media.autio.common.types was frozen. As a result,
unversioned reference to the interface now refers to the V2
of the interface, yet to be frozen. This causes ODR violation
where V1 and V2 of the interfaces are both used in the
platform.
To fix that, replaced the unversioned reference explicitly
with the reference to V1.
Bug: 225941299
Test: m
Change-Id: I8c57c730bebfe88b182d42a4bb8acea32ac4aee8
Align the behavior of minor version mismatch with the behavior
of major version mismatch. For example, trying to run VTS test
intended for V7.0 on a device with V7.1 yields no results,
similar to what happens when running a V6.0 test on V7.0 device.
This is done to avoid test failures when the device uses
features added by V7.1 in the APM XML config.
Bug: 227150535
Test: atest VtsHalAudioV7_0TargetTest
Test: atest VtsHalAudioV7_1TargetTest
Change-Id: I8ad6595a221f0bc9aedea057f27a75c172954da5
