libcrypto is unused, which causes problems when boringssl hash
injection is turned on as the code is all stripped and there is
nothing left to inject the hash into.
Bug: 137267623
Test: Ran the following together with the changes from
http://r.android.com/q/topic:bug137267623_bsslselftest
m VtsHalDrmV1_{0,1,2}TargetTest \
VtsHalWifiHostapdV1_{0,1}TargetTest{,Util} \
VtsHalWifiSupplicantV1_{0,1,2}TargetTest{,Util} \
VtsHalWifiSupplicantP2pV1_{0,2}TargetTest
(croot hardware/interfaces/confirmationui ; mma)
(croot hardware/interfaces/drm ; mma)
(croot hardware/interfaces/keymaster ; mma)
Change-Id: Ib0607671ef71d99becb483774f810aad9762f4f1
Since these were combined into libhidlbase.
Bug: 135686713
Test: build only (libhwbinder/libhidltransport are empty)
Change-Id: I075670b64eebbbbd6a6ae0e84ad51bf1c6f5ba36
Use closedir on DIR*, instead of close(dirfd(DIR*)).
Bug: http://b/109702699
Test: mma
Change-Id: I827d3a414761bb836d5360221296823fcb34cd6b
Merged-In: I827d3a414761bb836d5360221296823fcb34cd6b
libhidltransport symbols are being moved into libhidlbase in order to
optimize linking/memory usage. libhidltransport will no longer be
required in the future (however removing references to it will come
separately).
Bug: 134961554
Test: boot
Change-Id: Ibcc2db32d3bec1a786b60e11d4820ecd0605f403
Avoid race condition between event callback and wait context. Make
callbacktype to invalid before call function to change it.
Test: atest VtsHalWifiNanV1_0TargetTest VtsHalWifiNanV1_2TargetTest
Bug: 133484330
Change-Id: I9211c3e172727f56d0cceaf91b98f8d5b3c7fc7e
Devices that only have dual AP setup without an STA were not working. A
use case for this would be in a car, having a wifi hotspot active while
also projecting to the car head unit from your phone. This was working
but a recent change in CL a3e5b7f that forced STA to be on wlan0 and AP to start at
wlan1 broke this functionality. This change is to augment the original
CL to keep it's function in place while also taking into
account devices that have dual AP.
Bug: 132268977
Test: Manual boot of hawk device along with testing of tethering and
local only hotspot.
Change-Id: I8da5dd4f0baea1bf0f22d3275e356936a58fb3d1
Few class refactors to help with unit tests for ag/7567226.
Bug: 132943959
Test: ./hardware/interfaces/wifi/1.3/default/tests/runtests.sh
Change-Id: I62909f3f94899bc1593824684b93d29f44954eae
When the iface state is toggled for MAC address change on the underlying
interface for NAN operations, send NAN disabled event up to the
framework. The iface down/up toggle resets all NAN operations in the
firmware. So, this callback should trigger a cleanup of any
operations initiated by the framework.
Bug: 132943959
Test: Unit tests in the follow-up CL.
Test: Will send for regression tests.
Change-Id: I760dc5ca3b9276956f5edd40a97c3c13811f442c
NAN iface/RTT controllers are sharing the STA iface. When a STA iface is
removed, we should remove these dependent modules as well to ensure
proper cleanup.
Bug: 132837537
Test: ./hardware/interfaces/wifi/1.3/default/tests/runtests.sh
Test: Will send for regression tests.
Change-Id: Ia2da1dcf66b388f54e916ae69e2f4e26f20ecfad
Get rid of the unnecessary looping inside the method which was causing a
bunch of unnecessary selinux denial logs.
Bug: 130384921
Test: ./data/android.hardware.wifi@1.0-service-tests
Test: Manually verified the property name after wifi on/off & softap
on/off.
Change-Id: Ia9f61749b2017234851d67b027deb685cb8b539e
hidl-generated makefiles are now generated such that bpfmt(file) == file.
Bug: 67417008
Test: enable bpfmt hook
Change-Id: I53e5bf67a0d314e1b10c0ba0c7172a7af358ddcc
If wpa_supplicant is running during hostapd vts and there are some
configuration in wpa_supplicant. It will happen both of hostapd and
wpa_supplicant are working with wlan0 interface.
Stop wpa_supplicant before running hostapd vts.
Reproduce step:
1. Connect to Wifi before execute hostapd vts.
2. Run hostapd vts.
Bug: 130207248
Test: vts with below commands
vts-tradefed run commandAndExit vts-hal --skip-all-system-status-check --primary-abi-only --skip-preconditions --module VtsHalWifiHostapdV1_0Target -l INFO
vts-tradefed run commandAndExit vts-hal --skip-all-system-status-check --primary-abi-only --skip-preconditions --module VtsHalWifiHostapdV1_1Target -l INFO
Change-Id: Id91463c2eab3c8c348a91bd978d7ea4aa8d42e85
1. snip the VtsHalWifiV1_0Host#WifiStaIfaceHidlTest.SetScanningMacOui test
if SCAN_RAND capability is not supported on dut device
Test: execute VtsHalWifiV1_0TargetTest of VTS test
Bug: 129735587
Change-Id: I825e1df11c958b3b2476880c6c6f7b8ee7b292bf
Signed-off-by: hayun Kim <hayun.kim.lge.corp-partner.google.com>
hidl-generated makefiles are now generated such that bpfmt(file) == file.
Bug: 67417008
Test: enable bpfmt hook
Change-Id: I1f69d292bc23a7cc293a66110cb02d597e1019ad
The force 5GHz Go will cause fail when country code is 00 or chip
doesn't support 5GHz.
Change test parameter to force 0 which means driver decide GO channel.
Bug: 130208180
Test: vts-tradefed run commandAndExit vts-hal --skip-all-system-status-check --primary-abi-only --skip-preconditions --module VtsHalWifiSupplicantP2pV1_2Target -l INFO
Change-Id: I0d2a8fcba4ece616ddeccbae36146329e9043157
This is updated whenever a new STA or AP iface is created & removed.
Also, when the chip is configured.
This property can be read by the rest of the system (including vendor
specific HAL instances) to retrieve the active iface name.
Bug: 129506593
Test: ./data/android.hardware.wifi@1.0-service-tests
Test: Manually verified the property name after wifi on/off & softap
on/off.
Change-Id: Ic1c21fd3a1c6894c797070bf889f705e4cba6dd1
For the chip level operations, the actual interface itself does not
matter. So, instead of hard-coding these operations to wlan0 interface,
find the first active interface to use. This will still return wlan0 if
it's active, but if only AP is up (& pinned to wlan1), then it will use
wlan1 instead.
Bug: 129358937
Test: ./data/android.hardware.wifi@1.0-service-tests
Test: Verified manually that SAR commands are now correctly sent down.
Change-Id: I5a6175579027cbb45c09d32633ed81b9f72224dd
The primary STA iface will always be pinned to wlan0.
The primary AP iface will be pinned to wlan0 for devices not supporting
STA + AP concurrency & wlan1 for devices supporting STA + AP concurrency.
All secondary STA or AP ifaces will be allocated on a first come first
service basis (the current logic).
Also, refactored/renamed some of the iface combo selection logic methods
to help check whether concurrency is allowed in the current mode.
Bug: 128946563
Test: ./data/android.hardware.wifi@1.0-service-tests
Test: Will send for full regression tests.
Test: On crosshatch, ensured that STA always comes up on wlan0 & AP
comes up on wlan1 regardless of the sequence of toggle followed.
Change-Id: Idca8de42ce819240bf0fac2a9039d15ed4bcaf90
Devices are allowed to expose multiple AP or STA interfaces, fix the VTS
tests to allow this.
Bug: 112123615
Test: Compiles
Change-Id: I6cf60b3cb0429ca78fe5a54d9e42ba144d7609e9
ag/6722341 caused some unit test failures. Fixing them.
Bug: 127715974
Test: ./data/android.hardware.wifi@1.0-service-tests
Change-Id: Ib504cf55b9990dba081eb1b07bc32508e09ad0a6
This commit updates the documentation for the HAL API setLatencyMode().
It also updates the current.txt with the IWifiChip new hash.
Bug: 124459516
Test: None
Change-Id: I018e0237807aab70f7587d5fd7517d64352140f7
This commit adds the ether_type as an argument to the legacy hal
function to send an offloaded packet.
Bug: 122487582
Test: Manual
Test: Make sure ether_type is passed all the way to vendor hal function
Change-Id: I5918088000cc455e7f83feddc1090803ccc04c06
