Merge "wifi: update ini configuration file" into pi-dev

WCNSS_qcom_cfg.ini

@@ -90,6 +90,10 @@ gTxChainMask1ss=0
 gSelfGenFrmPwr=3
 
 gReportMaxLinkSpeed=0
+
+# Use OEM provisioned MAC address
+enable_mac_provision=1
+
 ################ NAN feature set start ###################
 # Enable or Disable NAN
 # 1=Enable (default), 0=Disable
@@ -139,6 +143,9 @@ gTxBFEnable=1
 gSetTxChainmask1x1=1
 gSetRxChainmask1x1=1
 
+# 2.4GHz Antenna Sharing is not supported
+gForce1x1Exception=0
+
 #If set to 0, MCC is not allowed.
 gEnableMCCMode=1
 
@@ -223,10 +230,6 @@ gEnableIpTcpUdpChecksumOffload=1
 # 1 - enable  0 - disable
 TSOEnable=0
 
-# Enable Large Recieve Offload
-# 1 - enable(default)  0 - disable
-LROEnable=1
-
 # Enable HT MPDU Density
 # 4 for 2 micro sec
 ght_mpdu_density=4
@@ -241,6 +244,12 @@ ce_service_max_yield_time=500
 ce_service_max_rx_ind_flush=1
 maxMSDUsPerRxInd=8
 
+# Data Stall Debugging feature
+gEnableDataStallDetection=0
+
+# Dynamic configuration of TCP limit output bytes
+gTcpLimitOutputEnable=0
+
 ################ Datapath feature set End ################
 
 #############################################
@@ -309,7 +318,7 @@ g_probe_req_ie_bitmap_0=0x0000000B
 # g_probe_req_ie_bitmap_3=0x00000000
 # g_probe_req_ie_bitmap_4=0x00000000
 # g_probe_req_ie_bitmap_5=0x00000000
-# g_probe_req_ie_bitmap_6=0x00000000
+g_probe_req_ie_bitmap_6=0x20000000
 # g_probe_req_ie_bitmap_7=0x00000000
 
 #############################################
@@ -366,7 +375,6 @@ EseEnabled=1
 
 gNeighborLookupThreshold=76
 gNeighborReassocThreshold=81
-gNeighborScanTimerPeriod=200
 gNeighborScanChannelMinTime=20
 gNeighborScanChannelMaxTime=30
 gMaxNeighborReqTries=3
@@ -404,6 +412,9 @@ gRoamOffloadEnabled=1
 
 gAllowDFSChannelRoam=1
 
+# LFR Subnet Detection
+gLFRSubnetDetectionEnable=0
+
 #############################################
 # Offload related configurations
 #############################################
@@ -454,6 +465,8 @@ gHwFilterMode=0
 # Default value of gEnableWoW is 3.
 # gEnableWoW=0
 
+# 11k feature offload
+11k_offload_enable_bitmask=0
 
 #############################################
 # Logging related configurations
@@ -585,8 +598,6 @@ gSapSccChanAvoidance=0
 #Enable/Disable Tx beamformee in SAP mode
 gEnableTxBFeeSAP=1
 
-
-
 #Enable/Disable dual MAC feature
 # 0 - enable DBS
 # 1 - disable DBS
@@ -632,6 +643,24 @@ mawc_nlo_enabled=0
 # Enable/Disable rtt sta mac randomization
 enable_rtt_mac_randomization=1
 
+# Channel selection logic DBS (1) vs MCC (0)
+channel_select_logic_conc=0
+
+gConfigVCmode=0
+
+# WLM (Wireless Latency Manager)
+wlm_latency_flags_moderate=0
+wlm_latency_flags_low=0
+wlm_latency_flags_ultralow=0
+
+# OCE Feature
+oce_sta_enable=0
+oce_sap_enable=0
+num_oce_wan_slots=0
+oce_wan_score_idx7_to_4=0
+oce_wan_score_idx11_to_8=0
+oce_enable_rssi_assoc_reject=0
+
 END
 
 # Note: Configuration parser would not read anything past the END marker