Duplicated device path such as speaker and bt-sco was missing which
causes path switch to fail for voice call.
Bug: 64195767
Test: manual audio test for voice call
Change-Id: I149d9a1d2729db8e631eac016aafd77acd76fd06
Signed-off-by: David Lin <dtwlin@google.com>
We have IOT issue with some APs causing disconnection with current 90
secs.
Bug: 63820163
Change-Id: I39bffcdf8c1e73bfaf02c18ac6edb7863f6e4f79
Signed-off-by: Ecco Park <eccopark@google.com>
This reverts commit efce5fb8a0.
Reason for revert: moving this logic under wahoo init script
Bug: 64065874
Change-Id: I531d22c92456ebe4a95408407285867a54afeda5
This reverts commit 8d0e6dca79.
Change-Id: I5777501d14ed2d551dba5bb314cdfcd5476b785d
reason: restore the folder if /persist/sensors is missing
Test: flash on a phone without /persist/sensors folder
Test: reboot and verify sensor regsitry is created
Test: and sensors are available to sensor service
Bug: 64065874
Updating all power profiles using the same scripts. Previously,
every power profile was generated using different algorithims.
b/62389228
Test: Run a normal android workload and verify the app blame
is reasonable
Change-Id: Idff05eb0fa776a3dae7bde2952ec80b031834d54
New hardware units have a mapping that's actually linear, so we assume
that the curve is linear here and have the kernel fix it up for us if it
needs to.
Bug: 63606090
Test: manual
Change-Id: I05c98115b20e0328654ca42ac58244ea81e19940
After looking at all the issues reported and logs captured,
these are the firmware logging levels (module-wise)
recommended to be enabled by default.
CRs-Fixed: 2081775
Bug: 63544726
Change-Id: I16a531b651836707963083fdf028874cae738bf2
Signed-off-by: Ecco Park <eccopark@google.com>
The wrong thermal-config was copied for VR mode.
Bug: 37544246
Test: verify that the correct VR thermal config is on-device
Change-Id: I8605336c5fbdac7450036883a68f1f25f111d286
1) Update applies to EVT2.2 and beyond
2) Add & Set the device_max_limit of SKIN-MID-LOW-FLOOR2 to 1497600
3) Raise SKIN-LOW-FLOOR2 set_point to 45 degreeC
4) Add charging current throttling for both normal and vr mode
Bug: 63152009
Bug: 63037732
Test: Boot & check logcat message
Change-Id: I0c10bb36717194aa0f0ac841d1a910eaa634e0c5
One msec is on the edge and sometimes glitches.
Two msec is more stable and matches the FastMixer burst.
Bug: 63934178
Test: "adb shell getprop aaudio.hw_burst_min_usec" should be 2000
Change-Id: I9687f5822d0827032b93f98779f9dd6ef9ca074c
Tested 1/2x, 1x, 2x, and 4x the current readahead buffer and noop and
cfq I/O schedulers for /dev/block/sda, which contains /data. The most
consistent performance boost was seen across all UFS vendors and storage
sizes using cfq and a readahead buffer of 1024.
Note: testing was done on Walleye, not Taimen
Bug: 38000161
Test: Compared 1P app launch times using app-launcher for schedulers
(noop, cfq) and readahead buffer sizes (128,512,1024,2048)
Change-Id: I7551a4110ad025ec7975dd39301f048f0942f585
This will allow AAudio to route audio data through a new service
that uses ALSA MMAP/NOIRQ mode.
Bug: 63002656
Test: reboot, then "adb shell getprop aaudio.mmap_policy" should be 2
Change-Id: Id2f692ac9350e4c308f17d86ee8d5cbb858bb565
Keep the original property also, to make it easier to experiment
with old and new libadm.so
Bug: 63810681
Test: round-trip USB latency unchanged with old or new libadm.so
Change-Id: I3ba8a670f6d8498a5899c352c544cbd63d815169
This reduces the minimum brightness to 0.009 nits from 0.09 nits
(on EVT1 and 2).
Bug: 63834045
Test: manual
Change-Id: I7d76eae6e76de5ed3a125f8f4b42d1bba2f57ac7
RESTRICT_VENDOR_FILES cannot be set to also enforce "path" as some vendor
specific modules related to IMS VT still needs to be installed in system.
Bug: 37330627
Change-Id: Ic94a63b4a53c876553a1c48a7d7a986ac11f790e
Signed-off-by: Thierry Strudel <tstrudel@google.com>
fix rx/tx mute when making call with 3-pole headset and USB dongle
Bug: 63680197
Test: manual audio sanity test
Change-Id: Ie8b3b6d0c5666539a794459e425570f4e5d7d447
