- The new control points are obtained based on fitting a neural network
on data collected from marlin and sailfish devices.
- Based on evaluations, compared to the previous control points, the new
ones achieve lower rmse and higher r-squared values in predicting
desired brightness values.
- See go/autobrightness-predictions for more details
Bug: 31040639
Test: manual
Change-Id: I94770044c0501620ae591b73020c3c45a366cd02
Overlays listed first take precedence over overlays listed later.
List muskie/walleye overlays before adding common overlays. Also,
resources outside of the "values" directory are overlayed by the
file so copy the data in power_profile.xml under wahoo to
muskie/walleye.
BUG: 36796913
Test: Verified "App usage since last charge" under Settings->Battery
Change-Id: I96c08a30f0ea9392a0867ee78039567d6661c754
To work around QCOM AU69 limitations,
allow vendor files to be installed in system.
Change-Id: I6e61e919f7bd069a6d97768a2a784992b10f59dc
Signed-off-by: Thierry Strudel <tstrudel@google.com>
In recovery, flash erase & logical block size can be used to tune the
stride and stripe-width parameters for the userdata partition on
factory reset. Add these sizes to the fstab file to make them
available for tuning.
Bug: 33243520
Test: factory reset walleye, check that stride & stripe-width are correct
Change-Id: I7fc3998ca001a0d46550bc2f3edd5100593b142f
Signed-off-by: Connor O'Brien <connoro@google.com>
1. [Mixer path]
i. Recording Dec gain adjustment
ii. Camera record change to one channel only
iii. Add TTY path
iv. Add ull bt-sco path
2. [Audio_platform_info]
i. Add TTYpath
Change-Id: Iee8626170fbe8d337633494039cf108bb6d7b771
Signed-off-by: vincent_tew <vincent_tew@htc.com>
Gadget stack would be configured based on persist.sys.usb.config.
Reset the usb stack before configuring.
Test: Manually verify modem overlay functions for usbradio bootmode
Bug: 31947358
Change-Id: I9bf5c1ad1626bba90689d7abfeaa8c27e82a7ecb
-Load blank init.logging.rc for user build
-Start SMLoging after PerMgr service running
-Change SMLoging location to /vendor/bin
Test: Verified in device by manually trigger SMLog
Change-Id: I622106e7a8023770bbe5ea4224ce2905c2647768
Creating a common script for M/W which would copied into target's
root as init.muskie.usb.rc or init.walleye.usb.rc. We can extend
this another level deeper if required.
Bug: 31947358
Change-Id: Ie10248ac4ba0f97c32de8758c89bd9b893615cda
This switches this device from monolithic to split sepolicy.
Test: Device boots, dmesg says "SELinux: Loaded policy from
/vendor/etc/selinux/precompiled_sepolicy" which means split
SELinux policy is being used.
Bug: 35809750
Change-Id: I3bac7306313a0688eb80ee858a051282657919cd
default bugreport stops dumping /proc/interrupts but
devices still probably care about it.
Bug: 36486169
Change-Id: Ia498aa0925d7c5f892ee6a0de9a2a3479de945a4
Signed-off-by: Sandeep Patil <sspatil@google.com>
To work around b/36413696 allow vendor files to be installed in system.
Change-Id: I4bd01c67f296fa11bbb5a8187fdd03d3480ac009
Signed-off-by: Thierry Strudel <tstrudel@google.com>
Enabled the muskie/walleye-specific overlay directories and added
auto-brightness values for muskie and walleye in their respective
config.xml overlays.
Bug: 35415845
Test: Manually verified adaptive brightness works.
Change-Id: Iaa0eac94ef275817ae85e2ed809a2ba036dd84a8
