davinci: nfc: Import configs

Change-Id: I965f7ec1069e0d9de161fbd9d909cf3d5ee2e6e9

configs/nfc/libnfc-nci.conf

@@ -0,0 +1,126 @@
+########################## Start of libnfc-nci.conf ###########################
+###############################################################################
+# Application options
+NFC_DEBUG_ENABLED=1
+
+###############################################################################
+# performance measurement
+# Change this setting to control how often USERIAL log the performance (throughput)
+# data on read/write/poll
+# defailt is to log performance dara for every 100 read or write
+#REPORT_PERFORMANCE_MEASURE=100
+
+###############################################################################
+# File used for NFA storage
+NFA_STORAGE="/data/nfc"
+
+###############################################################################
+# Configure the default NfcA/IsoDep techology and protocol route. Can be
+# either a secure element (e.g. 0xF4) or the host (0x00)
+#DEFAULT_ISODEP_ROUTE=0x00
+
+###############################################################################
+## Default poll duration (in ms)
+## The defualt is 500ms if not set
+NFA_DM_DISC_DURATION_POLL=500
+
+###############################################################################
+# Force UICC to only listen to the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F
+UICC_LISTEN_TECH_MASK=0x07
+
+###############################################################################
+# Force HOST listen feature enable or disable.
+# 0: Disable
+# 1: Enable
+HOST_LISTEN_ENABLE=0x01
+
+###############################################################################
+# When screen is turned off, specify the desired power state of the controller.
+# 0: power-off-sleep state; DEFAULT
+# 1: full-power state
+# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
+SCREEN_OFF_POWER_STATE=1
+
+###############################################################################
+# Force tag polling for the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
+#            NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
+#            NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO |
+#            NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE.
+#
+# Notable bits:
+# NFA_TECHNOLOGY_MASK_A             0x01    /* NFC Technology A             */
+# NFA_TECHNOLOGY_MASK_B             0x02    /* NFC Technology B             */
+# NFA_TECHNOLOGY_MASK_F             0x04    /* NFC Technology F             */
+# NFA_TECHNOLOGY_MASK_ISO15693	    0x08    /* Proprietary Technology       */
+# NFA_TECHNOLOGY_MASK_KOVIO         0x20    /* Proprietary Technology       */
+# NFA_TECHNOLOGY_MASK_ACTIVE        0x40    /* NFC Technology active mode   */
+POLLING_TECH_MASK=0x4F
+
+###############################################################################
+# Force P2P to only listen for the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
+#            NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE
+#
+# Notable bits:
+# NFA_TECHNOLOGY_MASK_A	            0x01    /* NFC Technology A             */
+# NFA_TECHNOLOGY_MASK_F	            0x04    /* NFC Technology F             */
+# NFA_TECHNOLOGY_MASK_A_ACTIVE      0x40    /* NFC Technology A active mode */
+# NFA_TECHNOLOGY_MASK_F_ACTIVE      0x80    /* NFC Technology F active mode */
+P2P_LISTEN_TECH_MASK=0x45
+
+###############################################################################
+PRESERVE_STORAGE=0x01
+
+###############################################################################
+# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h.
+# The value is set to 3 by default as it assumes we will discover 0xF2,
+# 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced
+# so that the stack will not wait any longer than necessary.
+# Maximum EE supported number
+# NXP PN547C2 0x02
+# NXP PN65T 0x03
+# NXP PN548C2 0x02
+# NXP PN66T 0x03
+NFA_MAX_EE_SUPPORTED=0x03
+
+##############################################################################
+# Deactivate notification wait time out in seconds used in ETSI Reader mode
+# 0 - Infinite wait
+NFA_DM_DISC_NTF_TIMEOUT=100
+
+###############################################################################
+# AID_MATCHING constants
+# AID_MATCHING_EXACT_ONLY 0x00
+# AID_MATCHING_EXACT_OR_PREFIX 0x01
+# AID_MATCHING_PREFIX_ONLY 0x02
+#AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03
+AID_MATCHING_MODE=0x03
+
+###############################################################################
+# Preferred Secure Element for Technology based routing
+# eSE               0x01
+# UICC              0x02
+NXP_PRFD_TECH_SE=0x01
+
+################################################################################
+#Set bit to 1 , black list is enabled
+#Set bit to 0,  to disable balcklist
+NFA_AID_BLOCK_ROUTE=0x01
+
+################################################################################
+# Maximum WTX requests entertained by MW
+NXP_WM_MAX_WTX_COUNT=50
+
+################################################################################
+#Set the default Felica T3T System Code :
+#This settings will be used when application does not set this parameter
+DEFAULT_SYS_CODE={FE:FF}
+
+#########################################################################
+#Set NCI credit notification timeout value
+NXP_NCI_CREDIT_NTF_TIMEOUT=2