ARM: dts: msm: Update PMIC support for cape

Add PMIC peripheral configurations for QRD.
Add a nvmem cell for adc scaling within PMK8350 SDAM127 for yupik.
This is used by clients to read the type of ADC scaling used for ibat.
Also add ADC channels with extended scaling for IBAT which can be
enabled optionally.

Change-Id: Ia64727553544b58fe77205e270755c1d3738514a

qcom/cape-mtp.dtsi

@@ -45,5 +45,4 @@
 &battery_charger {
 	qcom,thermal-mitigation = <3000000 1500000 1000000 500000>;
 	qcom,wireless-fw-name = "idt9415.bin";
-	qcom,shutdown-voltage = <3100>;
 };

qcom/cape-pmic-overlay.dtsi

@@ -58,6 +58,13 @@
 	};
 };
 
+&pmk8350_sdam_23 {
+	adc_scaling: scaling@bf {
+		reg = <0xbf 0x1>;
+		bits = <0 2>;
+	};
+};
+
 &pm8350b_haptics {
 	status = "ok";
 	nvmem-cell-names = "hap_cl_brake";
@@ -153,6 +160,20 @@
 		qcom,pre-scaling = <1000 305185>;
 	};
 
+	pm8350b_ichg_fb_2x {
+		reg = <PM8350B_ADC7_ICHG_FB>;
+		label = "pm8350b_ichg_fb_2x";
+		qcom,pre-scaling = <1000 610370>;
+		status = "disabled";
+	};
+
+	pm8350b_ichg_fb_2p5x {
+		reg = <PM8350B_ADC7_ICHG_FB>;
+		label = "pm8350b_ichg_fb_2p5x";
+		qcom,pre-scaling = <1000 762963>;
+		status = "disabled";
+	};
+
 	pm8350b_usb_in_v_div_16 {
 		reg = <PM8350B_ADC7_USB_IN_V_16>;
 		label = "pm8350b_usb_in_v_div_16";

qcom/cape-qrd.dtsi

@@ -1 +1,93 @@
-&soc { };
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "cape-pmic-overlay.dtsi"
+
+&soc {
+	gpio_keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_vol_up_default>;
+
+		vol_up {
+			label = "volume_up";
+			gpios = <&pm8350_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			gpio-key,wakeup;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+	};
+};
+
+&pm8350b_haptics {
+	qcom,vmax-mv = <1300>;
+	qcom,lra-period-us = <5880>;
+	status = "ok";
+
+	effect_0 {
+		/* CLICK */
+		qcom,wf-vmax-mv = <1800>;
+		qcom,wf-pattern-period-us = <5880>;
+	};
+
+	effect_1 {
+		/* DOUBLE_CLICK */
+		qcom,wf-vmax-mv = <1800>;
+		qcom,wf-pattern-period-us = <5880>;
+	};
+
+	effect_2 {
+		/* TICK */
+		qcom,wf-vmax-mv = <1800>;
+		qcom,wf-pattern-period-us = <5880>;
+	};
+
+	effect_3 {
+		/* THUD */
+		qcom,wf-vmax-mv = <1800>;
+		qcom,wf-pattern-period-us = <5880>;
+	};
+
+	effect_4 {
+		/* POP */
+		qcom,wf-vmax-mv = <1800>;
+		qcom,wf-pattern-period-us = <5880>;
+	};
+
+	effect_5 {
+		/* HEAVY CLICK */
+		qcom,wf-vmax-mv = <1800>;
+		qcom,wf-pattern-period-us = <5880>;
+	};
+};
+
+&pm8350c_switch0 {
+	qcom,led-mask = <9>; /* Channels 1 & 4 */
+	qcom,symmetry-en;
+};
+
+&pm8350c_switch1 {
+	qcom,led-mask = <6>; /* Channels 2 & 3 */
+	qcom,symmetry-en;
+};
+
+&pm8350c_switch2 {
+	qcom,led-mask = <15>; /* All Channels */
+	qcom,symmetry-en;
+};
+
+&pm8350c_flash {
+	status = "ok";
+};
+
+&battery_charger {
+	qcom,thermal-mitigation = <11500000 11000000 10500000 10000000 9500000
+				9000000 8500000 8000000 7500000 7000000 6500000
+				6000000 5500000 5000000 4500000 4000000 3500000
+				3000000 2500000 2000000 1500000 1000000 500000>;
+	qcom,wireless-fw-name = "idt9415.bin";
+};

qcom/pmk8350.dtsi

@@ -224,6 +224,13 @@
 			reg = <0x8500>;
 		};
 
+		pmk8350_sdam_23: sdam@8600 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x8600>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
 		pmk8350_sdam_41: sdam@9800 {
 			compatible = "qcom,spmi-sdam";
 			reg = <0x9800>;