mirror of
https://github.com/Evolution-X-Devices/kernel_xiaomi_sm8450-devicetrees
synced 2026-02-01 08:51:30 +00:00
dt-bindings: Add snapshot of QPNP SMB5 devicetree bindings
Add snapshot of QPNP SMB5 devicetree bindings as of devicetree-4.19
'commit d27efc41f8a5 ("ARM: dts: msm: Enable stat-toggle only for
lagoon")'.
Change-Id: I0af1b25b5ce878dad79c557cebf5a762bbae2eef
This commit is contained in:
Jishnu Prakash
562
bindings/power/supply/qcom/qpnp-smb5.txt
Normal file
562
bindings/power/supply/qcom/qpnp-smb5.txt
Normal file
@@ -0,0 +1,562 @@
|
||||
Qualcomm Technologies, Inc. SMB5 Charger Specific Bindings
|
||||
|
||||
SMB5 Charger is an efficient programmable battery charger capable of charging a
|
||||
high-capacity lithium-ion battery over micro-USB or USB Type-C ultrafast with
|
||||
Quick Charge 2.0, Quick Charge 3.0, and USB Power Delivery support. Wireless
|
||||
charging features full A4WP Rezence 1.2, WPC 1.2, and PMA support.
|
||||
|
||||
=======================
|
||||
Required Node Structure
|
||||
=======================
|
||||
|
||||
SMB5 Charger must be described in two levels of devices nodes.
|
||||
|
||||
===============================
|
||||
First Level Node - SMB5 Charger
|
||||
===============================
|
||||
|
||||
Charger specific properties:
|
||||
- compatible
|
||||
Usage: required
|
||||
Value type: <string>
|
||||
Definition: "qcom,qpnp-smb5".
|
||||
|
||||
- qcom,pmic-revid
|
||||
Usage: required
|
||||
Value type: phandle
|
||||
Definition: Should specify the phandle of PMI's revid module. This is used to
|
||||
identify the PMI subtype.
|
||||
|
||||
- qcom,sec-charger-config
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specify how the secondary chargers are configured.
|
||||
0 - No secondary charger.
|
||||
1 - Charge Pump SMB1390.
|
||||
2 - SMB1355 parallel charger.
|
||||
3 - Both Charge Pump and SMB1355.
|
||||
If the value is not present, 0 is used as default.
|
||||
|
||||
- io-channels
|
||||
- io-channel-names
|
||||
Usage: optional
|
||||
Value type: <phandle>
|
||||
Definition: For details about IIO bindings see:
|
||||
Documentation/devicetree/bindings/iio/iio-bindings.txt
|
||||
|
||||
- qcom,batteryless-platform
|
||||
Usage: optional
|
||||
Value type: <empty>
|
||||
Definition: Boolean flag which indicates that the platform does not have a
|
||||
battery, and therefore charging should be disabled. In
|
||||
addition battery properties will be faked such that the device
|
||||
assumes normal operation.
|
||||
|
||||
- qcom,charger-temp-max
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies the charger temp REG_H_THRESHOLD for PM8150B in deciDegC.
|
||||
If the value is not present, use the setting read from the device.
|
||||
|
||||
- qcom,smb-temp-max
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies the charger temp REG_H_THRESHOLD for SMB1355 in deciDegC.
|
||||
If the value is not present, use the setting read from the device.
|
||||
|
||||
- qcom,fcc-max-ua
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies the maximum fast charge current in micro-amps.
|
||||
If the value is not present, 1Amp is used as default.
|
||||
|
||||
- qcom,fv-max-uv
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies the maximum float voltage in micro-volts.
|
||||
If the value is not present, 4.35V is used as default.
|
||||
|
||||
- qcom,usb-icl-ua
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies the USB input current limit in micro-amps.
|
||||
If the value is not present, 1.5Amps is used as default.
|
||||
|
||||
- qcom,usb-ocl-ua
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies the OTG output current limit in micro-amps.
|
||||
If the value is not present, 1.5Amps is used as default.
|
||||
|
||||
- qcom,dc-icl-ua
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies the DC input current limit in micro-amps.
|
||||
|
||||
- qcom,boost-threshold-ua
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies the boost current threshold in micro-amps.
|
||||
If the value is not present, 100mA is used as default.
|
||||
|
||||
- qcom,thermal-mitigation
|
||||
Usage: optional
|
||||
Value type: Array of <u32>
|
||||
Definition: Array of fast charge current limit values for
|
||||
different system thermal mitigation levels.
|
||||
This should be a flat array that denotes the
|
||||
maximum charge current in mA for each thermal
|
||||
level.
|
||||
|
||||
- qcom,float-option
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Configures how the charger behaves when a float charger is
|
||||
detected by APSD.
|
||||
1 - Treat as a DCP.
|
||||
2 - Treat as a SDP.
|
||||
3 - Disable charging.
|
||||
4 - Suspend USB input.
|
||||
|
||||
- qcom,hvdcp-disable
|
||||
Usage: optional
|
||||
Value type: <empty>
|
||||
Definition: Specifies if hvdcp charging is to be enabled or not.
|
||||
If this property is not specified hvdcp will be enabled.
|
||||
If this property is specified, hvdcp 2.0 detection will still
|
||||
happen but the adapter won't be asked to switch to a higher
|
||||
voltage point.
|
||||
|
||||
- qcom,chg-inhibit-threshold-mv
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Charge inhibit threshold in milli-volts. Charging will be
|
||||
inhibited when the battery voltage is within this threshold
|
||||
from Vfloat at charger insertion. If this is not specified
|
||||
then charge inhibit will be disabled by default.
|
||||
Allowed values are: 50, 100, 200, 300.
|
||||
|
||||
- qcom,chg-term-src
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specify either the ADC or analog comparators to be used in order
|
||||
to set threshold values for charge termination current.
|
||||
0 - Unspecified
|
||||
1 - Select ADC comparator
|
||||
2 - Select ANALOG comparator
|
||||
|
||||
- qcom,chg-term-current-ma
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: When ADC comparator is selected as qcom,chg-term-src, this
|
||||
parameter should be set to the desired upper threshold.
|
||||
|
||||
- qcom,chg-term-base-current-ma
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: When ADC comparator is selected as qcom,chg-term-src, this
|
||||
parameter should be set to the desired lower threshold.
|
||||
|
||||
- qcom,auto-recharge-soc
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies the SOC threshold at which the charger will
|
||||
restart charging after termination. The value specified
|
||||
ranges from 0 - 100. The feature is enabled if this
|
||||
property is specified with a valid SOC value.
|
||||
|
||||
- qcom,auto-recharge-vbat-mv
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies the battery voltage threshold at which the charger
|
||||
will restart charging after termination. The value specified
|
||||
is in milli-volts.
|
||||
|
||||
- qcom,suspend-input-on-debug-batt
|
||||
Usage: optional
|
||||
Value type: <empty>
|
||||
Definition: Boolean flag which when present enables input suspend for
|
||||
debug battery.
|
||||
|
||||
- qcom,fake-chg-status-on-debug-batt
|
||||
Usage: optional
|
||||
Value type: <empty>
|
||||
Definition: Boolean flag which when present shows charging status as
|
||||
unknown for debug battery. This needs to be specified only if
|
||||
the device needs to be kept powered on always with
|
||||
"svc power stayon true".
|
||||
|
||||
- qcom,min-freq-khz
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies the minimum charger buck/boost switching frequency
|
||||
in KHz. It overrides the min frequency defined for the charger.
|
||||
|
||||
- qcom,max-freq-khz
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies the maximum charger buck/boost switching frequency in
|
||||
KHz. It overrides the max frequency defined for the charger.
|
||||
|
||||
- qcom,otg-deglitch-time-ms
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies the deglitch interval for OTG detection.
|
||||
If the value is not present, 50 msec is used as default.
|
||||
|
||||
- qcom,step-charging-enable
|
||||
Usage: optional
|
||||
Value type: bool
|
||||
Definition: Boolean flag which when present enables step-charging.
|
||||
|
||||
- qcom,typec-legacy-rp-icl
|
||||
Usage: optional
|
||||
Value type: bool
|
||||
Definition: Boolean property to enable setting ICL based on Rp for
|
||||
Type-C non-compliant legacy cables.
|
||||
|
||||
- qcom,wd-bark-time-secs
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: WD bark-timeout in seconds. The possible values are
|
||||
16, 32, 64, 128. If not defined it defaults to 64.
|
||||
|
||||
- qcom,sw-jeita-enable
|
||||
Usage: optional
|
||||
Value type: bool
|
||||
Definition: Boolean flag which when present enables sw compensation for
|
||||
jeita.
|
||||
|
||||
- qcom,battery-data
|
||||
Usage: optional
|
||||
Value type: <phandle>
|
||||
Definition: Specifies the phandle of the node which contains the battery
|
||||
profiles supported on the device.
|
||||
|
||||
- qcom,flash-derating-soc
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: SOC threshold in percentage below which hardware will start
|
||||
derating flash. This is only applicable to certain PMICs like
|
||||
PMI632 which has SCHGM_FLASH peripheral.
|
||||
|
||||
- qcom,flash-disable-soc
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: SOC threshold in percentage below which hardware will disable
|
||||
flash. This is only applicable to certain PMICs like PMI632
|
||||
which has SCHGM_FLASH peripheral.
|
||||
|
||||
- qcom,headroom-mode
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies flash hardware headroom management policy. The
|
||||
possible values are:
|
||||
<0>: Fixed mode, constant 5V at flash input.
|
||||
<1>: Adaptive mode allows charger output voltage to be
|
||||
dynamically controlled by the flash module based on the
|
||||
required flash headroom.
|
||||
This is only applicable to certain PMICs like PMI632 which
|
||||
has SCHGM_FLASH peripheral.
|
||||
|
||||
- qcom,fcc-stepping-enable
|
||||
Usage: optional
|
||||
Value type: bool
|
||||
Definition: Boolean flag which when present enables stepwise change in FCC.
|
||||
The default stepping rate is 100mA/sec.
|
||||
|
||||
- qcom,disable-suspend-on-collapse
|
||||
Usage: optional
|
||||
Value type: bool
|
||||
Definition: Boolean flag which when present disables suspend on collapse
|
||||
feature of charger hardware.
|
||||
|
||||
- qcom,uusb-moisture-protection-enable
|
||||
Usage: optional
|
||||
Value type: bool
|
||||
Definition: Boolean flag which when present enables mositure protection
|
||||
feature for uUSB connector type.
|
||||
|
||||
- qcom,hvdcp-autonomous-enable
|
||||
Usage: optional
|
||||
Value type: bool
|
||||
Definition: Boolean flag which when present enables hardware-controlled
|
||||
operation of HVDCP.
|
||||
|
||||
- qcom,usb-pd-disable
|
||||
Usage: optional
|
||||
Value type: bool
|
||||
Definition: Boolean flag which when present disables USB-PD operation.
|
||||
|
||||
- qcom,lpd-disable
|
||||
Usage: optional
|
||||
Value type: bool
|
||||
Definition: Boolean flag which when present disables liquid presence
|
||||
detection.
|
||||
|
||||
- qcom,hw-die-temp-mitigation
|
||||
Usage: optional
|
||||
Value type: bool
|
||||
Definition: Boolean flag which when present enables h/w based thermal
|
||||
mitigation.
|
||||
|
||||
- qcom,hw-connector-mitigation
|
||||
Usage: optional
|
||||
Value type: bool
|
||||
Definition: Boolean flag which when present enables h/w based
|
||||
connector temperature mitigation.
|
||||
|
||||
- qcom,hw-skin-temp-mitigation
|
||||
Usage: optional
|
||||
Value type: bool
|
||||
Definition: Boolean flag which when present enables h/w based skin
|
||||
temperature mitigation.
|
||||
|
||||
- qcom,en-skin-therm-mitigation
|
||||
Usage: optional
|
||||
Value type: bool
|
||||
Definition: Boolean flag which when present enables skin
|
||||
thermal mitigation.
|
||||
|
||||
- qcom,connector-internal-pull-kohm
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies internal pull-up configuration to be applied to
|
||||
connector THERM. The only valid values are (0/30/100/400).
|
||||
If not specified 100K is used as default pull-up.
|
||||
|
||||
- qcom,smb-internal-pull-kohm
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies internal pull-up configuration to be applied to
|
||||
connector THERM, only valid values are (0/30/100/400).
|
||||
If not specified 100K is used as default pull-up.
|
||||
|
||||
- qcom,wd-snarl-time-config
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: WDOG snarl timeout configuration value. The possible values are
|
||||
0 to 7, where 0 = 62.5ms, 1 = 125ms, 2 = 250ms, 3 = 500ms,
|
||||
4 = 1s, 5 = 2s, 6 = 4s and 7 = 8s. If not defined, wdog-snarl
|
||||
irq is disabled by default.
|
||||
|
||||
- qcom,adc-based-aicl
|
||||
Usage: optional
|
||||
Value type: bool
|
||||
Definition: Boolean flag which when present enables ADC based AICL.
|
||||
|
||||
- qcom,wls-current-max-ua
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Upper limit of charging current supplied by the wireless charger.
|
||||
If left unspecified, the HW min value of 1.5 A is applied by
|
||||
default.
|
||||
|
||||
- qcom,fcc-step-delay-ms
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies the delay between each step of FCC stepper algorithm.
|
||||
If left unspecified, the default value is 1 Sec.
|
||||
|
||||
- qcom,fcc-step-size-ua
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies the step size of each step of FCC stepper algorithm.
|
||||
If left unspecified, the default value is 100mA.
|
||||
|
||||
- qcom,hvdcp2-max-icl-ua
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies the maximum input current limit that can be configured
|
||||
for HVDCP2 adapter.
|
||||
If left unspecified, the default value is 3000mA.
|
||||
|
||||
- qcom,hvdcp3-max-icl-ua
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Specifies the maximum input current limit that can be configured
|
||||
for HVDCP3 adapter.
|
||||
If left unspecified, the default value is 3000mA.
|
||||
|
||||
- qcom,hvdcp3-standalone-config
|
||||
Usage: optional
|
||||
Value type: bool
|
||||
Definition: Boolean flag which when present indicates that the charging is
|
||||
only done by the main charger (standalone, no CP) with a QC 3.0
|
||||
adapter.
|
||||
|
||||
- qcom,disable-fcc-restriction
|
||||
Usage: optional
|
||||
Value type: bool
|
||||
Definition: Boolean flag which when present disables FCC restriction.
|
||||
|
||||
=============================================
|
||||
Second Level Nodes - SMB5 Charger Peripherals
|
||||
=============================================
|
||||
|
||||
Peripheral specific properties:
|
||||
- reg
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: Address and size of the peripheral's register block.
|
||||
|
||||
- interrupts
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: Peripheral interrupt specifier.
|
||||
|
||||
- interrupt-names
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: Interrupt names. This list must match up 1-to-1 with the
|
||||
interrupts specified in the 'interrupts' property.
|
||||
|
||||
=======
|
||||
Example
|
||||
=======
|
||||
|
||||
pm8150b_charger: qcom,qpnp-smb5 {
|
||||
compatible = "qcom,qpnp-smb5";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
qcom,pmic-revid = <&pm8150b_revid>;
|
||||
|
||||
dpdm-supply = <&qusb_phy0>;
|
||||
|
||||
qcom,sec-charger-config = <1>;
|
||||
|
||||
io-channels = <&pm8150b_vadc ADC_USB_IN_V_16>,
|
||||
<&pm8150b_vadc ADC_USB_IN_I>,
|
||||
<&pm8150b_vadc ADC_CHG_TEMP>;
|
||||
io-channel-names = "usb_in_voltage",
|
||||
"usb_in_current",
|
||||
"chg_temp";
|
||||
|
||||
qcom,chgr@1000 {
|
||||
reg = <0x1000 0x100>;
|
||||
interrupts = <0x2 0x10 0x0 IRQ_TYPE_NONE>,
|
||||
<0x2 0x10 0x1 IRQ_TYPE_NONE>,
|
||||
<0x2 0x10 0x2 IRQ_TYPE_NONE>,
|
||||
<0x2 0x10 0x3 IRQ_TYPE_NONE>,
|
||||
<0x2 0x10 0x4 IRQ_TYPE_NONE>;
|
||||
|
||||
interrupt-names = "chg-error",
|
||||
"chg-state-change",
|
||||
"step-chg-state-change",
|
||||
"step-chg-soc-update-fail",
|
||||
"step-chg-soc-update-request";
|
||||
};
|
||||
|
||||
qcom,otg@1100 {
|
||||
reg = <0x1100 0x100>;
|
||||
interrupts = <0x2 0x11 0x0 IRQ_TYPE_NONE>,
|
||||
<0x2 0x11 0x1 IRQ_TYPE_NONE>,
|
||||
<0x2 0x11 0x2 IRQ_TYPE_NONE>,
|
||||
<0x2 0x11 0x3 IRQ_TYPE_NONE>;
|
||||
|
||||
interrupt-names = "otg-fail",
|
||||
"otg-overcurrent",
|
||||
"otg-oc-dis-sw-sts",
|
||||
"testmode-change-detect";
|
||||
};
|
||||
|
||||
qcom,bat-if@1200 {
|
||||
reg = <0x1200 0x100>;
|
||||
interrupts = <0x2 0x12 0x0 IRQ_TYPE_NONE>,
|
||||
<0x2 0x12 0x1 IRQ_TYPE_NONE>,
|
||||
<0x2 0x12 0x2 IRQ_TYPE_NONE>,
|
||||
<0x2 0x12 0x3 IRQ_TYPE_NONE>,
|
||||
<0x2 0x12 0x4 IRQ_TYPE_NONE>,
|
||||
<0x2 0x12 0x5 IRQ_TYPE_NONE>;
|
||||
|
||||
interrupt-names = "bat-temp",
|
||||
"bat-ocp",
|
||||
"bat-ov",
|
||||
"bat-low",
|
||||
"bat-therm-or-id-missing",
|
||||
"bat-terminal-missing";
|
||||
};
|
||||
|
||||
qcom,usb-chgpth@1300 {
|
||||
reg = <0x1300 0x100>;
|
||||
interrupts = <0x2 0x13 0x0 IRQ_TYPE_NONE>,
|
||||
<0x2 0x13 0x1 IRQ_TYPE_NONE>,
|
||||
<0x2 0x13 0x2 IRQ_TYPE_NONE>,
|
||||
<0x2 0x13 0x3 IRQ_TYPE_NONE>,
|
||||
<0x2 0x13 0x4 IRQ_TYPE_NONE>,
|
||||
<0x2 0x13 0x5 IRQ_TYPE_NONE>,
|
||||
<0x2 0x13 0x6 IRQ_TYPE_NONE>,
|
||||
<0x2 0x13 0x7 IRQ_TYPE_NONE>;
|
||||
|
||||
interrupt-names = "usbin-collapse",
|
||||
"usbin-lt-3p6v",
|
||||
"usbin-uv",
|
||||
"usbin-ov",
|
||||
"usbin-plugin",
|
||||
"usbin-src-change",
|
||||
"usbin-icl-change",
|
||||
"type-c-change";
|
||||
};
|
||||
|
||||
qcom,dc-chgpth@1400 {
|
||||
reg = <0x1400 0x100>;
|
||||
interrupts = <0x2 0x14 0x0 IRQ_TYPE_NONE>,
|
||||
<0x2 0x14 0x1 IRQ_TYPE_NONE>,
|
||||
<0x2 0x14 0x2 IRQ_TYPE_NONE>,
|
||||
<0x2 0x14 0x3 IRQ_TYPE_NONE>,
|
||||
<0x2 0x14 0x4 IRQ_TYPE_NONE>,
|
||||
<0x2 0x14 0x5 IRQ_TYPE_NONE>,
|
||||
<0x2 0x14 0x6 IRQ_TYPE_NONE>;
|
||||
|
||||
interrupt-names = "dcin-collapse",
|
||||
"dcin-lt-3p6v",
|
||||
"dcin-uv",
|
||||
"dcin-ov",
|
||||
"dcin-plugin",
|
||||
"div2-en-dg",
|
||||
"dcin-icl-change";
|
||||
};
|
||||
|
||||
qcom,chgr-misc@1600 {
|
||||
reg = <0x1600 0x100>;
|
||||
interrupts = <0x2 0x16 0x0 IRQ_TYPE_NONE>,
|
||||
<0x2 0x16 0x1 IRQ_TYPE_NONE>,
|
||||
<0x2 0x16 0x2 IRQ_TYPE_NONE>,
|
||||
<0x2 0x16 0x3 IRQ_TYPE_NONE>,
|
||||
<0x2 0x16 0x4 IRQ_TYPE_NONE>,
|
||||
<0x2 0x16 0x5 IRQ_TYPE_NONE>,
|
||||
<0x2 0x16 0x6 IRQ_TYPE_NONE>,
|
||||
<0x2 0x16 0x7 IRQ_TYPE_NONE>;
|
||||
|
||||
interrupt-names = "wdog-snarl",
|
||||
"wdog-bark",
|
||||
"aicl-fail",
|
||||
"aicl-done",
|
||||
"high-duty-cycle",
|
||||
"input-current-limiting",
|
||||
"temperature-change",
|
||||
"switcher-power-ok";
|
||||
};
|
||||
|
||||
qcom,schgm-flash@a600 {
|
||||
reg = <0xa600 0x100>;
|
||||
interrupts = <0x2 0xa6 0x0 IRQ_TYPE_NONE>,
|
||||
<0x2 0xa6 0x1 IRQ_TYPE_NONE>,
|
||||
<0x2 0xa6 0x2 IRQ_TYPE_NONE>,
|
||||
<0x2 0xa6 0x3 IRQ_TYPE_NONE>,
|
||||
<0x2 0xa6 0x4 IRQ_TYPE_NONE>,
|
||||
<0x2 0xa6 0x5 IRQ_TYPE_NONE>,
|
||||
<0x2 0xa6 0x6 IRQ_TYPE_NONE>,
|
||||
<0x2 0xa6 0x7 IRQ_TYPE_NONE>;
|
||||
|
||||
interrupt-names = "flash-en",
|
||||
"torch-req",
|
||||
"flash-state-change",
|
||||
"vout-up",
|
||||
"vout-down",
|
||||
"ilim1-s1",
|
||||
"ilim2-s2",
|
||||
"vreg-ok";
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user