Fenglin Wu
39f9540ed6
dt-bindings: pinctrl: qcom-pmic-gpio: add binding for PM7325B
...
Add compatible string "qcom,pm7325b-gpio".
Change-Id: I015425864bc9510302364c17cfe361003031af97
2023-04-14 15:31:10 +08:00
Tengfei Fan
fb72f9b112
dt-bindings: Add TLMM VM documentation for Ravelin
...
Pinctrl driver enables Top Level Mode Multiplexer block(TLMM)
on Ravelin VM. TLMM VM irqchip acts as parent interrupt controller
for TLMM on VM.
Change-Id: I4a8188ef50c7dc5251bdf1ff91225fbfc629acdd
2022-11-04 21:36:25 -07:00
Rakesh Kota
6b383856dc
dt-bindings: pinctrl: Update pmi632-gpio to PMIC GPIO bindings for ravelin
...
PMIC GPIO binding documentation to include compatible strings
for the ravelin PMI632 PMIC.
Change-Id: Iefaa110be11b8aa69e8ab84f783d9768cc7405e2
2022-09-20 17:20:57 +05:30
Jishnu Prakash
cb47fab662
dt-bindings: pinctrl: qcom-pmic-gpio: add anorak PMIC GPIO bindings
...
Update the Qualcomm Technologies, INC. PMIC GPIO binding documentation
to include compatible strings for the anorak PMICs.
Anorak PMICs include PMXR2230, PM8550B, PM8550VE, PM8550VS, and
PMK8550.
In addition, include compatible strings for PM8550 and PMR735D.
Change-Id: I5e9cac3a04c9c72ea0b792714cee6f109d1db627
2022-07-19 22:41:20 -07:00
Yue Liu
c1a524b8fb
bindings: pinctrl: Add device-tree bindings for Ravelin pinctrl driver
...
Add documentation describing the device-tree properties for the Ravelin
pinctrl driver.
Change-Id: Iedc4f70d5aa8b387d9fbe99753438ba322106b2b
2022-05-26 13:38:00 +08:00
qctecmdr
82ec282b7d
Merge "dt-bindings: pinctrl: qcom-pmic-gpio: add PM6450 bindings"
2022-03-02 21:16:49 -08:00
Naina Mehta
f57e288147
bindings: pinctrl: Add qcom,gpios-reserved for Parrot
...
Add support to read reserved gpios from device tree on Parrot.
Change-Id: Ibab37a00b398767a9e63b1f15a69da6fc39b16b6
2022-03-01 15:09:00 +05:30
Jishnu Prakash
552a3b696e
dt-bindings: pinctrl: qcom-pmic-gpio: add PM6450 bindings
...
Update the Qualcomm Technologies, Inc. PMIC GPIO binding
documentation to include compatible strings for PM6450
PMIC.
Change-Id: Ia704a3d9200a62c4c62d6857045cd7fcf2ea0b62
2022-02-21 19:52:27 +05:30
Kamati Srinivas
1cc1ec6511
dt-bindings: Adding pinctrl devicetree documentation for Anorak
...
Adding pinctrl devicetree documentation for Anorak platform
Change-Id: Ifb9352218573c07906af9828fb2df2e00ed45a26
2022-02-18 18:43:51 +05:30
qctecmdr
5858eb6abf
Merge "ARM: dts: msm: add initial dt files to support Parrot VM"
2022-02-04 13:08:50 -08:00
Auditya Bhattaram
f5f852ed24
dt-bindings: Add TLMM VM documentation for Cape
...
Pinctrl driver enables Top Level Mode Multiplexer block(TLMM) on
Cape VM.
Change-Id: I1d4ae192b0486a1e1c0d97fde4f797879b518d9f
2022-01-25 20:48:59 -08:00
Naina Mehta
f541b93e67
dt-bindings: Add TLMM VM documentation for Parrot
...
Pinctrl driver enables Top Level Mode Multiplexer block(TLMM)
on Parrot VM. TLMM VM irqchip acts as parent interrupt controller
for TLMM on VM.
Change-Id: I51fb2c96dd2ad02d24dc6b221ff12a9d2a6686b9
2022-01-24 18:42:34 +05:30
Ashish Chavan
1d182668eb
dt-bindings: pinctrl: qcom-pmic-gpio: add PM7325 bindings
...
Update the Qualcomm Technologies, Inc. PMIC GPIO binding
documentation to include compatible strings for PM7325
PMIC.
Change-Id: Iac3ef41287023dde730d08462b6611c5b6072d83
2021-10-23 10:45:54 +05:30
Amrit Anand
1f39107fce
dt-bindings: Adding pinctrl devicetree documentation for neo
...
Adding pinctrl devicetree documentation for neo platform
Change-Id: Id188af3da6cc62c7ece86996ab899fe8a22dc1f1
2021-10-01 14:10:48 +05:30
qctecmdr
fae7cc4e64
Merge "ARM: dts: msm: Add support of IPCC MPROC for Parrot"
2021-09-28 21:10:23 -07:00
Naina Mehta
e4f2c83a14
bindings: pinctrl: Add device-tree bindings for Parrot pinctrl driver
...
Add documentation describing the device-tree properties for the Parrot
pinctrl driver.
Change-Id: Id8b6bfc598f747860aede2b03ea76ffd27036a96
2021-09-22 21:42:31 -07:00
Mukesh Ojha
0d65163463
dt-bindings: Add TLMM VM documentation for Diwali
...
Pinctrl driver enables Top Level Mode Multiplexer block(TLMM)
on Diwali VM. TLMM VM irqchip acts as parent interrupt controller
for TLMM on VM.
Change-Id: I175d667a2ab5dfa87ba46a725bfc71d435fb5673
2021-09-15 03:21:01 -07:00
Auditya Bhattaram
b64ee8a7ea
bindings: pinctrl: Add device-tree bindings for Cape pinctrl driver
...
Add documentation describing the device-tree properties for the Cape
pinctrl driver.
Change-Id: I326ce32c7f20d58206c21632a18ad8074a958f5c
2021-09-02 05:51:11 -07:00
Naina Mehta
f66334afc2
dt-bindings: Add TLMM VM mem access driver documentation
...
The driver facilitates initial memory access to TLMM VM driver.
Change-Id: I74d887aa17d646f07da359d020f237ab6810cdea
2021-06-17 22:37:16 +05:30
Elliot Berman
f713af429f
bindings: pinctrl: add qcom,gpios-reserved
...
Chipset variants may have different reserved gpios so that hard-coding
in the pinctrl driver itself isn't sufficient. Add support to read in
"reserved-gpios" from devicetree instead of "gpios." "gpios" behaves as
an "allow list" and "reserved-gpios" behaves as a "block list".
Change-Id: Iadc643d93e7037e189af8632906f6b9f40656e38
2021-06-08 17:12:32 -07:00
Naina Mehta
d6e8f0d1d5
dt-bindings: Add TLMM VM documentation
...
Pinctrl driver enables Top Level Mode Multiplexer block(TLMM) on
Waipio VM.
TLMM VM irqchip acts as parent interrupt controller for TLMM on VM.
Change-Id: Id7f3206e2299e10cb62e4bcc659e44ac686d23ed
2021-05-04 06:30:51 -07:00
Meng Wang
2b01ffb252
ARM: dts: msm: move audio devicetree node out of kernel
...
Move audio devicetree node out of kernel.
Change-Id: Ib73b302c12de25bab2c170d09a8553c218baa441
2021-04-12 08:45:28 +08:00
Prateek Sood
fb85ddbce3
bindings: pinctrl: Add device-tree bindings for Diwali pinctrl driver
...
Add documentation describing the device-tree properties for the Diwali
pinctrl driver.
Change-Id: If71d4a4389b47a21f658de241881e2552f856af4
2021-03-09 01:44:56 -08:00
Elliot Berman
7adfb2b429
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
...
Merge kernel.lnx.5.4-200915 into msm-5.10.
Change-Id: If85db2d0b92b484f2e439d72bee8c5e1056baa3f
2020-12-17 06:33:10 -08:00
David Collins
fd8ab1e65e
dt-bindings: pinctrl: qcom-pmic-gpio: add PM8450 bindings
...
Update the Qualcomm Technologies, Inc. PMIC GPIO binding
documentation to include a compatible string for the PM8450 PMIC.
Change-Id: I38bab44e0651a987fa18e6b966bdc55d286090cd
2020-11-20 14:49:38 -08:00
Elliot Berman
b54d17c2f5
bindings: Merge android-mainline (cbf07d5) into msm-waipio
...
Merge snapshot of bindings from android-mainline commit cbf07d5
("FROMLIST: clk: sunxi-ng: add support for the Allwinner A100 CCU").
Change-Id: Ica9bc8abf055fb28bdcd33dad244e3ba5fe1a04b
2020-09-23 13:47:05 -07:00
Guru Das Srinagesh
9c1e7c2540
dt-bindings: qcom-pmic-gpio: Add PMX65 bindings
...
Update the Qualcomm Technologies, Inc. PMIC GPIO binding
documentation to include compatible strings for PMX65.
Change-Id: Ifc4b0b1a159577e162786c776797569420785b84
2020-08-14 14:53:47 -07:00
qctecmdr
3d0c4ff1dc
Merge "Merge tag 'kernel.lnx.5.4-200510' into msm-waipio"
2020-07-15 17:23:44 -07:00
Elliot Berman
936530a982
Merge tag 'kernel.lnx.5.4-200510' into msm-waipio
...
* tag 'kernel.lnx.5.4-200510':
ARM: dts: msm: Add cooling-cells property in battery device for lahaina
ARM: dts: msm: Add hyp core control driver node for Lahaina
ARM: dts: msm: Add PMIC die temperature mitigation for Lahaina
ARM: dts: msm: Add modem junction mitigation rule for Lahaina
dt-bindings: qcom-pmic-gpio: Add PM7250B, PM6350 and PM6150L bindings
ARM: dts: msm: Add QUPv3 and GPI DT nodes on SHIMA
ARM: dts: msm: Add Modem pil node for Shima
ARM: dts: msm: add stub interconnect devices for sm8150
dt-bindings: interconnect: add interconnect bindings
ARM: dts: msm: enable superspeed plus redriver on QRD
ARM: dts: msm: set io coherent on cvp DT
ARM: dts: msm: Add CDSP pil node for Shima
ARM: dts: msm: Add LPASS pil node for Shima
dt-bindings: interconnect: add interconnect bindings
dt-bindings: regulator: Add snapshot of rpm-smd-regulator doc
ARM: dts: msm: Remove unused PMK8350 ADC channels for holi
ARM: dts: msm: Add stub regulators for sdx65
ARM: dts: msm: Add usb bypass mode and disable smmu for lahaina
ARM: dts: msm: Add DT snapshots for PM6350, PM7250b and PM6150l
ARM: dts: msm: usb_phy pin support usb_phy and gpio mode
ARM: dts: msm: Add SPMI PMIC arbiter device for holi
ARM: dts: msm: Mark USB DP/DM interrupt as dual edge on Lahaina
dt-bindings: Add support for event RP access from DDR for GPI and GCI
ARM: dts: msm: Add RUMI specific console property for Shima
ARM: dts: msm: Add QUPv3_0 and SE5 dt nodes for SHIMA
ARM: dts: msm: clean up cache-size properties
ARM: dts: msm: Add kernel cmdline to increase the dmesg buffer size
ARM: dts: msm: Change TUI heap type to MSM_CARVEOUT
ARM: dts: msm: Add modem ADC thermistors for Lahaina
dt-bindings: thermal: Add support for mmw ADC thermistors
ARM: dts: msm: Enable CDSP cooling devices for Lahaina
ARM: dts: msm: Enable uC HOLB monitor feature
ARM: dts: msm: Add initial ION heaps for holi
ARM: dts: msm: Add memory map for holi
ARM: dts: msm: Adding external VR viewer support
ARM: dts: msm: add qcom,ipa-gpi_event_rp_ddr property
ARM: dts: msm: Add secure_buffer and qcom,scm device on SM8150
ARM: dts: msm: Add initial ION heaps for SM8150
ARM: dts: msm: Add qrtr haven for trusted vm
ARM: dts: msm: Add qrtr haven for lahaina
ARM: dts: msm: Add neuron block service for trusted vm
ARM: dts: msm: Add neuron block service for lahaina
ARM: dts: msm: Add dts node for boot_stats
ARM: dts: msm: Add TLMM direct connect interrupts for sm8150
dt-bindings: Add dt-binding for mpm counter
ARM: dts: msm: Increase memory-hotplug region for lahaina
dt-bindings: thermal: Add support for modem DSC cooling devices
dt-bindings: thermal: Add support for CDSP cooling devices via qmi cdev
ARM: dts: qcom: add dt entry needed for avb
ARM: dts: msm: Add missing compatible of cmd_db for shima
ARM: dts: msm: Add dummy clock nodes for clock controllers for HOLI
bindings: clock: Add support for HOLI clock controller
ARM: dts: msm: Add system_pm as child of APPS RSC for shima
ARM: dts: msm: add nvmem cell for haptics CL brake in Lahaina
Revert "Revert "ARM: dts: msm: increase ipa modem smem size to 36k on Lahaina""
ARM: dts: msm: Add SPS node for Shima
ARM: dts: msm: add sleep state for PCIe0 CLKREQ for lahaina
ARM: dts: msm: Add the mem-buf device for the trusted VM
ARM: dts: msm: Add modem DSC mitigation nodes for lahaina
ARM: dts: msm: Enable IO coherency with USB device on Lahaina
ARM: dts: msm: Add UFS support for shima
ARM: dts: msm: Enable SD card on Lahaina QRD platform
ARM: dts: msm: Update gpio drive strength for soundwire tx
ARM: dts: msm: Add stub regulators for holi
ARM: dts: msm: Adding device tree node for holi pinctrl
dt-bindings: Adding pinctrl devicetree binding for holi
ARM: dts: msm: Add initial device tree for Holi
ARM: dts: msm: add smmu devices for Shima
ARM: dts: msm: Add DMA coherency hint to vidc context banks
Revert "ARM: dts: msm: increase ipa modem smem size to 36k on Lahaina"
ARM: dts: msm: Update ddr bandwidth levels for A660
ARM: dts: msm: Add ARM PMU node for Shima
ARM: dts: msm: Add SLPI pinctrl for SM8150
bindings: pinctrl: Add device-tree bindings for SLPI pinctrl driver
bindings: input: qcom-hv-haptics: add nvmem to store CL brake settings
bindings: input: qcom-hv-haptics: Add qcom,fifo-empty-threshold
ARM: dts: msm: Add clock required for IPA QoS configuration
ARM: dts: msm: Add LLCC entry for Shima
ARM: dts: msm: Add ipcc test nodes for Shima
ARM: dts: msm: add PDR support for PMIC Glink on Lahaina
bindings: pmic-glink: add protection domain restart (PDR) support
ARM: dts: msm: do not compile Non-VM specific DT files
ARM: dts: msm: Update QMP Phy init sequence for Lahaina
ARM: dts: msm: Add dcc registers lists for lahaina
ARM: dts: msm: Update the RPMHCC node for SHIMA
ARM: dts: msm: Modify voltage ranges for PM8350B AMOLED regulator
dt-bindings: qpnp-amoled: Update voltage ranges for PM8150A/PM8350B
ARM: dts: msm: Remove NFC I3C DT node for Lahaina
ARM: dts: msm: Add clocks for UFS QOS configuration on Lahaina
ARM: dts: msm: use voltage mitigation for pop mem in lahaina
ARM: dts: msm: Enable CPU voltage cooling device for lahaina
dt-bindings: thermal: Use the correct vendor string for voltage device
ARM: dts: msm: add stub interconnect devices for SHIMA
dt-bindings: Add documentation for the "non-coherent" SMMU dt-binding
dt-bindings: interconnect: add interconnect bindings
ARM: dts: msm: Add charger reference to USB node on Lahaina
dt-bindings: i2c-msm-geni: Add DT bindings for le-vm flag
ARM: dts: qcom: reduce PM8008J LDO min voltages for Lahaina
ARM: dts: msm: Add support for votable GDSCs
ARM: dts: msm: Remove epss_l3_shared node
bindings: clock: Add support for SHIMA clock controllers
ARM: dts: msm: Add IMEM entry for Shima
ARM: dts: msm: Add device trees for LahainaP variant
dt-bindings: msm: Add compatible strings for lahainap
ARM: dts: msm: Add Common driver, I2C and GSI DT nodes in trustedvm
ARM: dts: msm: add capacity and DPC properties for Shima
ARM: dts: msm: Add LPM support for sm8150
ARM: dts: msm: Update RSC nodes for sm8150
ARM: dts: msm: Update PDC node for sm8150
ARM: dts: msm: Add "regulator-allow-set-load" for PM8350B IBB regulator
dt-bindings: LLCC: Add "qcom,shima-llcc" compatible property
ARM: dts: msm: increase ipa modem smem size to 36k on Lahaina
ARM: dts: msm: Update ufs bus vote for Lahaina
ARM: dts: msm: Add USB nodes for Shima
dt-bindings: thermal: Add documentation for CPU voltage cooling device
ARM: dts: msm: Disable tpdm ddr for lahaina
ARM: dts: msm: Add cdsp rpmsg entry in Lahaina
ARM: dts: msm: Add spss glink ssr entry for Lahaina
dt-bindings: usb: Add Gen2 Tx Compliance tuning property for dwc3
ARM: dts: msm: Add entry for bluetooth sw_ctrl gpio
ARM: dts: msm: Increase the dwc3 reg address range for Lahaina
Revert "ARM: dts: msm: Clean-up vidc DT node"
ARM: dts: msm: Add pinctrl for PM8350C GPIO 9 on Lahaina platforms
ARM: dts: msm: Add pshold to Shima
ARM: dts: msm: add msm_rtb tracing
ARM: dts: msm: Add core hang detection to dt for Shima
ARM: dts: msm: Move qbt_handler to soc
ARM: dts: msm: Add boot-enabled flag support for spcom
ARM: dts: msm: Add boot-enabled flag support for spss
ARM: dts: msm: use 'dma-coherent-hint-cached' for fastrpc nodes
Revert "dt-bindings: msm: vidc: Clean-up dt properties"
ARM: dts: msm: Enable smmu for SD card on Lahaina
ARM: dts: msm: remove aux devices
dt-bindings: clock: Add rpmh clock bindings for Shima
ARM: dts: msm: Add regulators for sa8155
ARM: dts: msm: Remove spss glink ssr entry for Lahaina
ARM: dts: msm: add proxy consumers for L2B and L1C regulators on Lahaina
dt-bindings: net: Add bindings for qcom,qrtr-haven
ARM: dts: msm: Set no-status-check-on-disable for Lahaina PCIe GDSCs
ARM: dts: msm: Add snapshot of all SM8150 and SA8155 DT files
ARM: dts: msm: enable qmap flow control feature
ARM: dts: msm: Add RSC device bindings for Shima
ARM: dts: msm: Add wakeup parent for Shima TLMM
ARM: dts: msm: add PDC device bindings for Shima
ARM: dts: msm: Add support for ION for the trusted-VM
ARM: dts: msm: add swr dmic's as codecs
bindings: sound: Add swr-haptics binding document
ARM: dts: msm: define continuous splash memory region for lahaina
dt-bindings: msm: Add compatible strings for sa8155
ARM: dts: msm: Add initial device tree for SM8150
ARM: dts: msm: Add LPM support for shima
ARM: dts: msm: add subsystem restart (SSR) for PMIC Glink on Lahaina
dt-bindings: pmic-glink: add subsystem restart (SSR) support
dt-bindings: qpnp-lcdb-regulator: Add LCDB regulator documentation
ARM: dts: msm: Add labels for lpi_cx and lpi_mx rails
ARM: dts: msm: Enable UFS HS Rate-B on Lahaina
ARM: dts: msm: add FE CPU dai for hearing aid
ARM: dts: msm: Add AMOLED regulator on pm8350b for Lahaina
ARM: dts: msm: Enable CPU cooling device for lahaina
dt-bindings: Add support for boot enabled subsystem
bindings: input: qcom-hv-haptics: Change to use 8-bit FIFO data
ARM: dts: msm: Add swr-slave regulator device node in haptics module
bindings: input: qcom-hv-haptics: add swr-slave regulator subnode
ARM: dts: msm: Add AOP QMP nodes for shima
ARM: dts: msm: Add glink entries for Shima
ARM: dts: msm: Add HWSPINLOCK, SMEM and SMP2P for Shima
ARM: dts: msm: Add IPCC node for Shima
ARM: dts: msm: Add initial ION heaps for Shima
ARM: dts: msm: Add spss glink ssr entry for Lahaina
ARM: dts: msm: add 4 new compute DSP context banks for lahaina
ARM: dts: qcom: modify initramfs size
ARM: dts: msm: Add memory map for shima
ARM: dts: msm: Add EUD extcon handler for primary USB on Lahaina
ARM: dts: msm: Set dr_mode as OTG on Lahaina
ARM: dts: msm: add node for Atmel touch on Lahaina
bindings: spmi: spmi-pmic-arb: define consumer qcom,pmic-arb property
ARM: dts: msm: add UCSI connector and USB port on Lahaina
ARM: dts: msm: add CPU dai for additional proxy ports
ARM: dts: msm: Fix the dc_noc io register space and size
ARM: dts: msm: Add pinctrls for external regulaors in camera for Lahaina
ARM: dts: msm: Map QDSS gfx debug registers for Lahaina
ARM: dts: msm: Add apb clock to GPU device for Lahaina
ARM: dts: msm: Update disp_bcm_voter to only wait for AMC
ARM: dts: msm: add wil6210 device for Lahaina platforms
ARM: dts: qcom: add sde-rsc-rpmh driver to disp_rsc node
ARM: dts: msm: Enable Kryo erp driver for Shima
ARM: dts: msm: Manage rumi identification with platform flag
ARM: dts: msm: add node for Focaltech touch on Lahaina
ARM: dts: msm: add gpio cells property
bindings: spmi: spmi-pmic-arb: mark interrupt properties as optional
Revert "ARM: dts: msm: change camera DTSI inclusions for Lahaina qrd"
ARM: dts: msm: change camera DTSI inclusions for Lahaina qrd
ARM: dts: msm: Update QMP Phy init sequence for Lahaina
ARM: dts: msm: Add SCM node for Shima
ARM: dts: msm: Update all gdsc time out to 500 us
ARM: dts: msm: add pinctrl for secondary display for lahaina
ARM: dts: msm: add wsa883x as codecs
ARM: dts: msm: add wcd938x as a codec
ARM: dts: msm: Correct sleep clk frequency to 32khz
dt-bindings: net: Add bindings for qcom,neuron
ARM: dts: msm: Add configuration for vref regulator vote for lahaina
ARM: dts: msm: Add GPU thermal zone configuration for lahaina
ARM: dts: msm: Add BCL configuration for lahaina
ARM: dts: msm: Add CPU thermal configuration for lahaina
bindings: Add dt-bindings for pdc controller on qc SoCs
bindings: ARM: add devicetree binding for describing PSCI firmware
bindings: Add snapshot of dt bindings for arm-cache
bindings: Add dt-bindings for arch_timer
dt-bindings: Add compatible strings for rmph clk for sm8150
dt-bindings: Add compatible strings for gcc clock on sm8150
dt-bindings: msm: Add compatible strings for sa5155
dt-bindings: Add snapshot of hyp_core_ctl driver documentation
ARM: dts: msm: Update the GSI gpii mask for lahaina
ARM: dts: msm: add msm id in shima-rumi-overlay.dts
dt-bindings: leds-qpnp-vibrator-ldo: Add vibrator LDO documentation
ARM: dts: msm: Add pin configuration for USB3 PHY portselect
dt-bindings: usb: Add super speed re-driver bindings
ARM: dts: msm: Enable LPM and remove the gear limits on Lahaina
dt-bindings: msm: vidc: Clean-up dt properties
ARM: dts: msm: Add modem QMI sensor and cdev configuration for lahaina
dt-bindings: thermal: Add LMH DCVSh devicetree documentation
ARM: dts: msm: add charger thermal mitigation levels for Lahaina MTP
ARM: dts: msm: Clean-up vidc DT node
ARM: dts: msm: Update CNSS S12B voltage level to 1.35v
ARM: dts: msm: Enable smmu for ufs on Lahaina
ARM: dts: msm: Upgrade Lahaina's memory map to version 4
ARM: dts: msm: Add the mem-buf device for Lahaina
ARM: dts: msm: remove CX, MX and MMCX always-on configuration for Lahaina
Change-Id: I99734e502f1611c3d3a4652815fc4701348e2f7b
2020-07-10 10:00:48 -07:00
Elliot Berman
4ed56db673
bindings: pinctrl: Add devicetree bindings for Waipio TLMM
...
Add documentation describing the devicetree properties for the Waipio
TLMM block as a pinctrl device.
Change-Id: I97fe153ff3ffd767c2789730b49a66da62497d73
2020-07-07 07:03:36 -07:00
Jeevan Shriram
0b0202381b
bindings: pinctrl: Add device-tree bindings for SDXLEMUR pinctrl driver
...
Add documentation describing the device-tree properties for the Lemur
pinctrl driver.
Change-Id: I5e6d433a6109e5b057c86b5b440d53ecca6bb9e1
2020-06-22 12:35:40 -07:00
Venkata Narendra Kumar Gutta
229b528f41
Merge tag 'kernel.lnx.5.4-200305.1' into msm-waipio
...
* tag 'kernel.lnx.5.4-200305.1':
ARM: dts: msm: Add the CX GDSC to the IOMMU device
ARM: dts: msm: Move IOMMU clocks to the GPU device
ARM: dts: msm: Enable USB secondary port on Lahaina
bindings: power: supply: Add thermal mitigation for qcom,battery-charger
ARM: dts: msm: Add dummy clock nodes for clock controllers for SHIMA
ARM: dts: msm: enable haptics for Lahaina QRD
ARM: dts: msm: Update S12B and S1C voltages
ARM: dts: msm: add support for dynamic port map
ARM: dts: msm: add wil6210 pinctrl configurations for Lahaina
ARM: dts: msm: Add NFC I3C device node for Lahaina
ARM: dts: msm: Enable SD card support on Lahaina
ARM: dts: msm: Add SD card bus voting details for Lahaina
ARM: dts: msm: Add CVP AXI reset pulse
ARM: dts: msm: Add stub regulators for shima
ARM: dts: msm: add route between va and swr dmic's
Revert "ARM: dts: msm: remove hdmi codec enable"
ARM: dts: msm: update SWR_DMIC to 0 on Lahaina QRD device
ARM: dts: msm: Mark APPS SMMU interconnect votes as active-only
dt-bindings: Document qcom,active-only
ARM: dts: qcom: Update trusted vm DT entries
ARM: dts: msm: Add pinctrl node for TLMM on Shima SoC
bindings: pinctrl: Add device-tree bindings for Shima pinctrl driver
ARM: dts: msm: Add initial device tree for Shima
ARM: dts: msm: Correct cmb size of turing llm turing for lahaina
ARM: dts: msm: add DMIC DT node for QRD DMIC device
ARM: dts: msm: Add camera device tree inclusions for Lahaina
ARM: dts: qcom: specify ADC channels for Lahaina PMIC temp-alarm devices
ARM: dts: msm: Update devicetree to enable FM on lahaina
ARM: dts: msm: Add ADC support for Lahaina
ARM: dts: msm: set PMIC thermal zone trip points to critical for Lahaina
ARM: dts: msm: Update S12B and S1C voltages
ARM: dts: msm: Add fix for SW_CTRL mapped to wrong GPIO66 on MSM side
ARM: dts: msm: remove hdmi codec enable
ARM: dts: msm: add external audio codec
ARM: dts: msm: Correct the interconnect names node
ARM: dts: msm: Open up gpu power levels upto NOM
ARM: dts: msm: Add hwkm node for lahaina
bindings: Add device-tree bindings for hwkm driver
ARM: dts: msm: Add camera device tree inclusions for Lahaina
ARM: dts: msm: Add WLAN updates to HSP DTSI overlays
ARM: dts: msm: Add ICE region for UFS
ARM: dts: msm: update PCIe0 and PCIe1 PHY for lahaina v1
ARM: dts: msm: Fix FM chip ON issue
ARM: dts: msm: Add snapshot of memshare dt documentation
ARM: dts: msm: Add support for FM in lahaina platform
dt-bindings: thermal: qcom-adc-tm: add PMIC7 ADC_TM_IIO compatible string
dt-bindings: msm: add snapshot of msm_11ad doc
ARM: dts: msm: add swr dmics as aux dev
ARM: dts: msm: Update CNSS S12B voltage level to 1.35v
ARM: dts: msm: Update soundwire DMIC configuration on Lahaina
ARM: dts: msm: update PCIe0 and PCIe1 CLKREQ default func select on lahaina
ARM: dts: msm: Add dt node for Focaltech touch IC
ARM: dts: msm: Add tpdm lpass lpi for lahaina
ARM: dts: msm: Add cti trig_out gpio for Lahaina
ARM: dts: msm: Add dt node for ST Micro touch IC
ARM: dts: msm: add gpio pincntrl for touch
ARM: dts: msm: fix DSI reset gpio pincntrl
ARM: dts: msm: update audio dt node for lahaina qrd device
ARM: dts: qcom: Add regulator changes for Lahaina
ARM: dts: msm: Reorganize the pinctrl node
ARM: dts: qcom: Rename lahaina-svm1 to trustedvm
ARM: dts: msm: update i2c slave address for fsa4480 on Lahaina
ARM: dts: msm: Add a new device tree file for HSP configuration
ARM: dts: msm: Add VBUS/ID configuration for USB secondary port on Lahaina
ARM: dts: msm: update audio device tree on lahaina
ARM: dts: msm: Add usb_audio_qmi_dev node
ARM: dts: msm: Fix the gem_noc node address and reg size
ARM: dts: msm: Disable tpdm shrm for Lahaina
ARM: dts: msm: Enable turing llm tpdm for lahaina
ARM: dts: msm: Add mem_dump node for lahaina
ARM: dts: msm: disable second USB port for Lahaina QRD
dt-bindings: haven: Add bindings for qcom,vm-1.0
ARM: dts: msm: Rectify I3C node DT properties
ARM: dts: qcom: add flash/torch LEDs on PM8350C for Lahaina platforms
ARM: dts: msm: Disable USB secondary port on Lahaina
ARM: dts: qcom: Reserved GuestVM memory and add its PIL driver
dt-bindings: Add bindings for guestvm-loader
ARM: dts: msm: Add permittable RFA2 (min,max) voltage
ARM: dts: msm: Limit ETR iova range for lahaina
ARM: dts: msm: Add IPCC test nodes for end to end verification
ARM: dts: msm: Add CNSS2 node for Lahaina
ARM: dts: msm: Update dtsi for page recycle and cleanup
ARM: dts: qcom: update RPMh regulator min/max voltage limits for Lahaina
ARM: dts: msm: update PCIe L5 and L6 current vote on lahaina
ARM: dts: msm: Add Altmode PMIC GLINK client for Lahaina
bindings: Add altmode-glink
ARM: dts: msm: Restrict default CMA region below 0xE0000000
ARM: dts: qcom: add Glink SPMI debug controller device for Lahaina
ARM: dts: msm: include display platform DT files
bindings: spmi: add QTI Glink SPMI debug controller binding documentation
ARM: dts: msm: add proxy votes for display regulators
arm64: dts: qcom: Add secondary VM dts file for lahaina
ARM: dts: msm: Correct the typo of remote-endpoint for lahaina
ARM: dts: msm: limit gear to 3 for Lahaina
ARM: dts: qcom: add haptics on PM8350B for Lahaina CDP/MTP
ARM: dts: msm: Update Lahaina USB3 QMP UNI PHY init settings
ARM: dts: msm: Hot fix for Lahaina
ARM: dts: qcom: Link restart_reason nvmem cell to qcom,pshold
ARM: dts: qcom: add nvmem cell for PMK8350 SDAM2 restart reason
ARM: dts: msm: enable PCIe0 and PCIe1 on lahaina
dt-bindings: Document the qcom,dynamic-heap binding
dt-bindings: Add device-tree bindings for the memory sharing driver
ARM: dts: msm: add PMIC Glink and clients for Lahaina
ARM: dts: msm: Update fastrpc SIDs and masks
ARM: dts: qcom: add VDD_MX and CX subnodes for MMCX dependencies on Lahaina
ARM: dts: msm: Enable video driver
ARM: dts: qcom: Update limit-rate and add limit-phy-submode on Lahaina
ARM: dts: msm: set MSR range in CSR for Lahaina
dt-bindings: extcon-usb-gpio: Document optional vbus-out-gpio
ARM: dts: msm: Update changes for audio device tree on Lahaina
ARM: dts: msm: Fix secondary USB port related aggre_noc clock
ARM: dts: msm: add initial PHY sequence for PCIe0 and PCIe1 on lahaina
ARM: dts: msm: add PCIe pipe clk mux and ext src to PCIe clock for lahaina
ARM: dts: msm: add aggre_noc_pcie_*_axi_clk for PCIe on lahaina
ARM: dts: msm: Add dtsi changes for qbt_handler
dt-bindings: Add documentation for qbt_handler
ARM: dts: msm: Add TSENS thermal nodes for lahaina
ARM: dts: qcom: change all rpmh-regulator LDO default modes to HPM
ARM: dts: msm: Do not create logical mappings for the secure CDSP heap
ARM: dts: msm: Disable watchdog for Lahaina-RUMI
ARM: dts: msm: Update the arch_timer frequency
ARM: dts: msm: Specify address/size cells for &soc on lahaina-rumi
dt-bindings: input: qcom-hv-haptics: Add initial binding document
ARM: dts: msm: Add secure display heap
ARM: dts: msm: Add alias for HSUART node
ARM: dts: qcom: switch to I2C control of PM8008 PMIC regulators for Lahaina
ARM: dts: msm: Include ipcc_test dtsi file in lahaina.dtsi file
ARM: dts: msm: vidc: Add register value mask
ARM: dts: msm: Fix ufs OCS error
ARM: dts: msm: Fix USB PHY resets
ARM: dts: msm: Add interconnects to USB on Lahaina
dt-bindings: usb: Document interconnects usage for qcom,dwc-usb3-msm
bindings: qti-flash: Fix slave id for pm8350c in DT example
dt-bindings: Add snapshot of QPNP AMOLED regulator bindings
bindings: soc: qcom: add QTI battery glink debug
ARM: dts: msm: Add PWM and RGB LED devices for PM8350C
ARM: dts: msm: add a CX, MX and MMCX Turbo level proxy request for Lahaina
ARM: dts: qcom: update RPMh regulator voltage limits for Lahaina
ARM: dts: msm: Add QSEE IRQ bridge entry for Lahaina
ARM: dts: msm: Add device tree overlay for Lahaina CDP
ARM: dts: msm: Add regulator entries for Lahaina
ARM: dts: msm: add qcom,fastrpc-gids property on Lahaina
ARM: dts: msm: Update supply routing for swr dmic on Lahaina
bindings: pinctrl: Add device-tree bindings for Lahaina pinctrl driver
ARM: dts: msm: add display sde nodes to target dtsi
ARM: dts: msm: Replace swr dmic mic bias number on Lahaina
bindings: Documentation: Update swr mic device tree documentation
ARM: dts: msm: Add and enable disp rsc support for Lahaina
ARM: dts: msm: add proxy consumers for L5B and L6B regulators on Lahaina
dt-bindings: regulator: add rpmh-regulator bindings
dt-bindings: regulator: add refgen regulator bindings
ARM: dts: msm: Add SD card entries for Lahaina
ARM: dts: msm: Add bluetooth power and slimbus slave node
ARM: dts: msm: Add regmap and clocks for interconnects on Lahaina
ARM: dts: msm: Add swr dmic nodes on Lahaina
bindings: Documentation: Update swr mic device tree documentation
bindings: Documentation: Add swr mic device tree documentation
dt-bindings: add documentation for leds-qti-flash
bindings: power: supply: add QTI battery charger
ARM: dts: msm: Do not bypass SMMU for ufshc
dt-bindings: Add dt binding for Focaltech driver
ARM: dts: msm: fix ipa smp2p node issue
ARM: dts: msm: Add the lahaina gpu dtsi
ARM: dts: msm: update DPC properties for Lahaina
ARM: dts: msm: Change the audio routing sequence
ARM: dts: msm: add documentation qcom,tx-wrapper-cache-max-size
ARM: dts: msm: add qcom,tx-wrapper-cache-max-size property
ARM: dts: msm: Add the offlineable memory sizes for Lahaina
ARM: dts: msm: Update audio device tree overlay for lahaina
ARM: dts: msm: Add turing etm support for Lahaina
ARM: dts: qcom: Remove UFS PHY reset control on Lahaina
ARM: dts: msm: add pinctrl information for Lahaina target
bindings: Documentation: Add wsa883x device tree documentation
dt-bindings: regulator: pm8008-regulator: add OCP interrupt support
ARM: dts: msm: Move apps_rsc before interconnect devices
ARM: dts: msm: Set USB mode as peripheral only on Lahaina
bindings: add audio device tree for lahaina
bindings: Documentation: add QTI audio documentation
ARM: dts: msm: Add USB Uni PHY related device node on Lahaina
ARM: dts: msm: Update and enable the debug cc measure nodes
ARM: dts: msm: Add QTI crypto device-tree node for Lahaina
bindings: Add device-tree bindings for QTI crypto drivers
dt-bindings: input: Add dt bindings for STMicro
ARM: dts: qcom: Add dtsi node entry for Slimbus in lahaina
ARM: dts: msm: use clock driver to vote for IPA code
ARM: dts: msm: Add ACTLR settings for the APPS and GFX SMMUs
dt-bindings: nfc: Add Documentation for I2C NFC devicetree node
ARM: dts: msm: Fix GSI IRQ type warnings on lahaina
dt-bindings: thermal: Add ADC_TM documentation for PMIC7
ARM: dts: msm: Add TSENS node support for lahaina
ARM: dts: msm: Add jtagmm device node for lahaina
ARM: dts: msm: Add initial device tree for Lahaina QRD Module
ARM: dts: msm: update port number to hex format
ARM: dts: msm: Add qseecom node for Lahaina
ARM: dts: msm: Enable s1 in fastmap for QUPv3 drivers on lahaina
ARM: dts: msm: Add 2-wire UART node for lahaina
ARM: dts: msm: Add cpufreq-hw node for Lahaina
dt-bindings: ufs: Add compitable string for V4 UFS PHY on Lahaina
ARM: dts: msm: add reset support for UFS on Lahaina
ARM: dts: msm: Add pshold to Lahaina
dt-bindings: qti-tri-led: Update reg definition
dt-bindings: pwm-qti-lpg: Update reg definition
ARM: dts: qcom: add dt entry needed for avb
dt-bindings: android: add entries for android
ARM: dts: msm: Enable QRNG driver for lahaina
dt-bindings: cpufreq: Add msm-cpufreq bindings snapshot
dt-bindings: Add USB audio QMI driver bindings
ARM: dts: msm: Add SPS driver node for Lahaina
ARM: dts: msm: Add etm save/restore for Lahaina
dt-bindings: rng: Add DT binding entry for msm-rng
ARM: dts: msm: Disable usb1 on Lahaina RUMI
ARM: dts: msm: Add EUD node for Lahaina
ARM: dts: msm: Add device tree overlay support for Lahaina
ARM: dts: msm: add documentation tx-napi
dt-bindings: slim-msm-ngd: Add dt bindings for slimbus driver
dt-bindings: nfc: Add Documentation for I3C NFC devicetree node
ARM: dts: msm: Add coresight device tree for Lahaina
dt-bindings: devfreq: add support for L3 voting in devfreq_icc
dt-bindings: devfreq: add support for shared core-dev tables
dt-bindings: iio: adc: Add PMIC7 VADC bindings
ARM: dts: msm: add volume up gpio-keys device for Lahaina boards
ARM: dts: msm: add PMK8350 PON_PBS and PON_HLOS devices
dt-bindings: input: add qpnp-power-on bindings
ARM: dts: msm: add SPMI debug bus for Lahaina boards
ARM: dts: msm: add PMIC devices for Lahaina
ARM: dts: msm: Specify clock-output-names for sleep_clk on Lahaina
ARM: dts: qcom: Add QUP ICC Core2x path IDs for QUPv3 node
ARM: dts: msm: add initial PCIe nodes for lahaina
dt-bindings: arm: msm: remove msm-bus and add ICC for PCIe
dt-bindings: arm: msm: add initial devicetree documenation for MSI
dt-bindings: arm: msm: add initial devicetree documentation for PCIe
dt-bindings: clocks: Add debugcc clock bindings for Lahaina
dt-bindings: pinctrl: qcom-pmic-gpio: add PMR735A and PMR735B bindings
dt-bindings: rtc: rtc-pm8xxx: Add binding documentation for pmk8350 rtc
ARM: dts: msm: add SPMI PMIC arbiter device for Lahaina
ARM: dts: msm: Add L3 devfreq devices for Lahaina
ARM: dts: msm: Update SIDs for test devices
dt-bindings: cpufreq: Add cpufreq firmware bindings
ARM: dts: msm: add spss_utils to lahaina
ARM: dts: msm: enable ipa smp2p
ARM: dts: msm: Update the smem size for Lahaina
ARM: dts: msm: Add limit rate on G4 for Lahaina rumi
ARM: dts: msm: Add ufs bus voting details for Lahaina
ARM: dts: qcom: Add spcom to support SPU on lahaina
ARM: dts: msm: Add ion heap for Secure Processor on lahaina
ARM: dts: msm: Add interconnect l3 epss devices for Lahaina
ARM: dts: msm: Configure SMMU in bypass mode for Lahaina RUMI
ARM: dts: msm: Add LLCC and DDR devfreq devices for Lahaina
dt-bindings: interconnect: add EPSS L3 bindings
ARM: dts: msm: Add QUPv3 SE and GPI DT node for lahaina
dt-bindings: Add dt bindings for jtagv8 driver
dt-bindings: qti-tri-led: Add bindings
dt-bindings: pwm-qti-lpg: Add bindings
dt-bindings: Add snapshot of thermal devicetree bindings
ARM: dts: msm: enable rmtfs for Lahaina
dt-bindings: Add device-tree bindings for EUD driver
ARM: dts: msm: Update Lahaina's memory map to V3
dt-bindings: devfreq: add support for memory latency QoS voting
dt-bindings: devfreq: add support for new memlat design
dt-bindings: devfreq: add support for different ddr types
dt-bindings: kgsl: Add device tree bindings for the KGSL GPU driver
dt-bindings: perf: Add DT bindings for LLCC_PMU_VER2 driver
dt-bindings: perf: Add DT bindings for QCOM LLCC PMU driver
dt-bindings: devfreq: Add DT bindings to support OPP BW values
dt-bindings: Add DT bindings to support compute bound logic
ARM: dts: msm: Add vdd_cx-supply node to gcc on Lahaina
dt-bindings: clocks: Update gcc clock bindings for Lahaina
ARM: dts: msm: Add vdd_mx-supply node to gpu cc on Lahaina
dt-bindings: clocks: Update gpucc clock bindings for Lahaina
bindings: Add device-tree bindings for qseecom driver
ARM: dts: msm: Add tz_log node for Lahaina
bindings: Add device-tree bindings for tz_log driver
dt-bindings: devfreq: Add DT bindings to add a stall cycle count event
dt-bindings: Add DT bindings for specifying the count factor
dt-bindings: devfreq: Make the freq-table property optional
dt-bindings: devfreq: Add DT bindings to configure byte MID match
ARM: dts: msm: Add smcinvoke node for Lahaina
bindings: Add device-tree bindings for smcinvoke driver
ARM: dts: msm: add lan-rx-napi property
ARM: dts: msm: add PIL spss node to lahaina
dt-bindings: Add camera devicetree bindings for lahaina
ARM: dts: msm: remove SPI config property
ARM: dts: msm: Update USB interrupt trigger types on Lahaina
ARM: dts: msm: Enable dcc on lahaina
ARM: dts: msm: update clock_rpmh device node for Lahaina
dt-bindings: clock: Add rpmh clock bindings for Lahaina
dt-bindings: add devicetree binding for fsa4480
ARM: dts: msm: Add USB PHY devices and related resources on Lahaina
bindings: add support for qcom,ucsi-glink
dt-bindings: devfreq: Add dt-bindings for BWMON HW version 5
dt-bindings: devfreq: Add DT bindings for ARM memlat driver
dt-bindings: devfreq: Add support for BWMON HW version 4
dt-bindings: devfreq: Add dt-bindings for BWMON HW version 3
dt-bindings: devfreq: Add the dt bindings for clock prepare
dt-bindings: devfreq: Add DT bindings for devfreq_simple device
dt-bindings: devfreq: Add dt-bindings for BWMON HW version 2
dt-bindings: devfreq: Add DT bindings for bimc bwmon driver
dt-bindings: devfreq: Add DT bindings for devfreq_icc device
ARM: dts: msm: IPA msm bus dtsi update for Lahaina
dt-bindings: i3c-master-qcom-geni: Add DT bindings for I3C GENI driver
ARM: dts: msm: Update and enable clk-aop clks on Lahaina
ARM: dts: qcom: add virt_clk interconnect provider
dt-bindings: interconnect: Add clk_virt documentation on Lahaina
ARM: dts: msm: Add USB BAM device node on Lahaina
ARM: dts: msm: Add support for modem PIL
ARM: dts: msm: Add SCM node
dt-bindings: regulator: add proxy consumer bindings
dt-bindings: pmic-glink: add qcom,pmic-glink-channel property
ARM: dts: msm: Add GDSC regulator references for Lahaina's SMMUs
bindings: add support for qcom,pmic-glink
ARM: dts: msm: Add SSC based sensors with SLPI PIL on Lahaina
ARM: dts: msm: Add modem smp2p for Lahaina
ARM: dts: msm: Document kona device binding
ARM: dts: msm: Add ARM PMU node for Lahaina
dt-bindings: spi-msm-geni: Add DT bindings for SPI GENI driver
ARM: dts: msm: Add CVP device tree for Lahaina
ARM: dts: msm: add reset control support for UFS PHY on Lahaina
ARM: dts: msm: Add embedded UFS device reset GPIO on Lahaina
dt-bindings: nvmem: add bindings for QTI SDAM devices
dt-bindings: soc: qcom: add bindings for QTI PBS devices
dt-bindings: platform: msm: add bindings for qpnp-revid devices
dt-bindings: spmi: spmi-pmic-arb-debug: add clock management support
dt-bindings: spmi: add SPMI PMIC arbiter debug bus bindings
dt-bindings: mfd: add qcom-i2c-pmic bindings
ARM: dts: msm: Add Lahaina video configuration
dt-bindings: pinctrl: qcom-pmic-gpio: add PM*8350* bindings
dt-bindings: mfd: qcom,spmi-pmic: add documentation for qcom,can-sleep
dt-bindings: gpi: Add DT bindings for GPI dmaengine driver
ARM: dts: msm: Update and enable graphics clock controller on Lahaina
dt-bindings: clocks: Add gpu cc clock controller bindings for Lahaina
ARM: dts: msm: Add IPA dtsi entry for Lahaina
dt-bindings: i2c-msm-geni: Add DT bindings for I2C GENI driver
ARM: dts: msm: Add QUPV3 SE dt node for uart on Lahaina
dt-bindings: Add device-tree bindings for slimbus slave driver
dt-bindings: usb: Document USB qcom,usb-charger property
ARM: dts: msm: add dt nodes for adsp & cdsp PIL for Lahaina
ARM: dts: msm: change lan_rx_napi to lan-rx-napi
bindings: usb_bam: Add USB BAM driver related documentation
ARM: dts: msm: Update bus entries in pil-video node
dt-bindings: media: Add video driver bindings for Lahaina
ARM: dts: msm: Update USB device nodes on Lahaina
dt-bindings: usb: Add bindings for MSM SSUSB
dt-bindings: usb: Document dwc3 xhci-imod-value property
ARM: dts: msm: add dt node for video
ARM: dts: msm: Add camera pinctrl info for Lahaina
bindings: Add USB PHY drivers related documentation
ARM: dts: msm: Add glink entries for Lahaina
ARM: dts: msm: Update and enable the cam cc node on Lahaina
dt-bindings: clocks: Add cam cc clock controller bindings for Lahaina
dt-bindings: Add snapshot for 5.4-rc2
ARM: dts: msm: add documentation lan_rx_napi
ARM: dts: msm: Enable the secure carveout heap on Lahaina
ARM: dts: msm: Unstub the DISP_CC node for Lahaina
dt-bindings: clk: Add DISP_CC clock driver bindings for Lahaina
ARM: dts: msm: Unstub the VIDEO_CC node for Lahaina
dt-bindings: clk: Add VIDEO_CC clock driver bindings for Lahaina
ARM: dts: msm: add initial device tree for Lahaina low power modes
ARM: dts: msm: Add glink entry for spss on Lahaina
ARM: dts: msm: Add shmbridge node for Lahaina
bindings: Add device-tree bindings for qtee_shmbridge driver
dt-bindings: Add spcom documentation
dt-bindings: Add spss_utils documentation
ARM: dts: msm: add wakeup parent for Lahaina
dt-bindings: arm: snapshot of psci bindings
dt-bindings: Introduce soc sleep stats bindings for QTI SoCs
dt-bindings: add device bindings for DDR stats node
dt-bindings: msm: add PM drivers device bindings
ARM: dts: qcom: add USB GDSC supplies for Lahaina
ARM: dts: qcom: switch PM8350 LDO 7 to RPMh control for Lahaina
ARM: dts: qcom: add GDSC devices for Lahaina
ARM: dts: qcom: add refgen regulator device for Lahaina
dt-bindings: regulator: add refgen regulator bindings
ARM: dts: qcom: switch to RPMh controlled PMIC regulators for Lahaina
ARM: dts: qcom: add PMIC PMR735A regulator devices for Lahaina
ARM: dts: msm: Add bcm voter devices for lahaina
dt-bindings: interconnect: Update QTI SDM845 DT bindings
dt-bindings: regulator: add rpmh-regulator bindings
ARM: dts: qcom: update PMIC regulator voltage limits for Lahaina
dt-bindings: of: irq: document properties for wakeup interrupt parent
dt-bindings: pdc: Add SPI config register
ARM: dts: msm: add capacity and DPC properties for Lahaina
ARM: dts: msm: Add WDT node for Lahaina
ARM: dts: msm: Update and enable the clock_gcc node on Lahaina
dt-bindings: clocks: add gcc clock controller bindings for Lahaina
dt-bindings: dma: sps: Add dt binding for SPS driver
dt-bindings: regulator: add PMIC PM8008 regulator bindings
ARM: dts: msm: remove uncessary node from IPA nodes for Lahaina SoC
ARM: dts: msm: Correct the UFS PHY address space for Lahaina
ARM: dts: msm: Use dt-bindings header for ION on Lahaina
ARM: dts: msm: Add smp2p sleepstate node for Lahaina
ARM: dts: msm: Add AOP QMP nodes for Lahaina
ARM: dts: msm: Update the timer clock frequence as per RUMI E3.0
dt-bindings: arm: Add CSR/TPDM/TPDA/TGU/Remote ETM support
ARM: dts: msm: add fastrpc and cdsp device nodes for lahaina
dt-bindings: Add device-tree bindings for Watchdog driver
ARM: dts: msm: add RSC device bindings for lahaina
ARM: dts: msm: add PDC device bindings for Lahaina
dt-bindings: Add documentation for the mem-offline driver
ARM: dts: msm: Add core hang detection to dt
bindings: Add qcom,msm-hang-detect schema
dt-bindings: arm: coresight: add trace unit power property
dt-bindings: Add dt bindings for memory dump
dt-bindings: Add dt bindings for dcc
dt-bindings: Add device-tree bindings for BT power driver
dt-bindings: regulator: gdsc-regulator: add property for register retention
dt-bindings: clk: gdsc-regulator: add parent supply property
dt-bindings: regulator: add gdsc-regulator bindings
dt-bindings: clock: add rpmh clock bindings for Kona
dt-bindings: clk: add AOP clock controller bindings
dt-bindings: qdsp: device-tree documentation for fastrpc and CDSP loader
dt-bindings: Add device-tree bindings for rtc6226 driver
ARM: dts: msm: Add IPA node for Lahaina SoC
bindings: serial: Binding for serial UART driver
bindings: qcom-geni-se: Common GENI driver
dt-bindings: Add snapshot for 5.3-rc4
dt-bindings: qdsp: Device tree documentation for sensors ssc
ARM: dts: msm: Add initial ION heaps for Lahaina
ARM: dts: msm: Make the CDSP secure carveout mappable on Lahaina
ARM: dts: msm: add msm_rtb tracing
bindings: Add qcom,msm-rtb schema
ARM: dts: msm: Add USB device nodes for Lahaina
ARM: dts: msm: Add HWSPINLOCK, SMEM and SMP2P for Lahaina
ARM: dts: msm: Disable the coherent KGSL IOMMU test device
ARM: dts: msm: Fix major and minor versions for Lahaina boards
dt-bindings: net: qrtr: Add FIFO transport bindings
dt-bindings: arm: msm: Add sleepstate-smp2p bindings
dt-bindings: arm: msm: Introduce qsee_ipc_irq_bridge bindings
dt-bindings: arm: msm: Introduce qcom,qsee_irq bindings
dt-bindings: soc: qcom: Introduce Glink Pkt bindings
dt-bindings: soc: qcom: Introduce Glink Probe bindings
ARM: dts: msm: Add device-tree entry for IMEM
ARM: dts: msm: Add support for SCM PAS
dt-bindings: Add device-tree bindings for IMEM
bindings: Add device-tree bindings for secure PIL driver
dt-bindings: Introduce QMP debugfs client bindings
dt-bindings: mailbox: Introduce MSM_QMP bindings
dt-bindings: kryo-edac: add kryo edac bindings
ARM: dts: msm: Add edac node for Lahaina SoC
ARM: dts: msm: Enable the graphics SMMU on Lahaina
dt-bindings: Add device-tree bindings for CNSS2 driver
ARM: dts: msm: Add IPCC test nodes for end to end verification
ARM: dts: msm: Add IPCC node for Lahaina
dt-bindings: Add device-tree bindings for IPCC driver
ARM: dts: msm: Make LLCC node compatible with "qcom,lahaina-llcc"
dt-bindings: LLCC: Add "qcom,lahaina-llcc" compatible property
dt-bindings: Add device-tree bindings for the ION memory manager
ARM: dts: msm: Add the SMMU devices for Lahaina
ARM: dts: msm: Add the secure buffer device for Lahaina
dt-bindings: Merge all IOMMU documentation from msm-4.19 to msm-lahaina
ARM: dts: msm: Add device-tree node for LLCC driver
dt-bindings: LLCC: Add "qcom,llcc-v2" compatible property
ARM: dts: msm: add ufs device support for Lahaina
ARM: dts: msm: add stub interconnect devices for Lahaina
bindings: usb: Add bindings for USB PHY on QTI emulation platform
ARM: dts: msm: Add SCM node for Lahaina SoC
bindings: Add device-tree bindings for SCM driver
ARM: dts: msm: Add memory carveouts as per Lahaina v2 memory map
dt-bindings: interconnect: add interconnect bindings
dt-bindings: Add snapshot from tmp-f686d9f
ARM: dts: msm: Add pinctrl node for TLMM on Lahaina SoC
bindings: pinctrl: Add device-tree bindings for Lahaina pinctrl driver
ARM: dts: msm: add stub clock devices for Lahaina
dt-bindings: clocks: add dummycc bindings
bindings: Add snapshot of bindings with GPL-2.0 or BSD-2-Clause license
ARM: dts: msm: add stub regulator devices for Lahaina
dt-bindings: regulator: add stub regulator bindings
ARM: dts: msm: Add initial device tree for Lahaina
dt-bindings: msm: Add compatible strings for Lahaina
dt-bindings: Snapshot of msm device tree binding document
ARM: dts: vendor: Add an initial Makefile to the vendor
dt-bindings: Add devicetree bindings to devicetree project
Initial empty repository
Change-Id: Icb722bcaa651702f1843582ae7f1bd9807681018
2020-05-08 12:56:50 -07:00
Venkata Narendra Kumar Gutta
b0e5152a74
dt-bindings: Add devicetree bindings to devicetree project
...
Add devicetree bindings snapshot to the devicetree project.
This snapshot is taken as of the
'commit 5fba1b18cfc72e264e5f3ce49020ed322aa6ac9f ("Merge 5.6-rc3
into android-mainline")' of the kernel project.
Change-Id: Ia087ab2b7d4a2616ea446a69683a8b5b821d0448
2020-05-07 20:43:53 -07:00
Jishnu Prakash
3b0ab42f69
dt-bindings: qcom-pmic-gpio: Add PM7250B, PM6350 and PM6150L bindings
...
Update the Qualcomm Technologies, Inc. PMIC GPIO binding
documentation to include compatible strings for PM7250B, PM6350
and PM6150L PMICs.
Change-Id: I23673981435fd5e95e416a05bd148b3b244e10ac
2020-05-01 18:20:46 +05:30
qctecmdr
9ae6c35864
Merge "ARM: dts: msm: Add SLPI pinctrl for SM8150"
2020-04-19 15:24:19 -07:00
Yogesh Lal
a903a9f778
dt-bindings: Adding pinctrl devicetree binding for holi
...
Adding pinctrl devicetree binding for holi platform.
Change-Id: Ic8999b2360524e1178c2a63b4a8723fac0f22985
2020-04-14 23:06:01 -07:00
Vivek Kumar
08e1de0844
bindings: pinctrl: Add device-tree bindings for SLPI pinctrl driver
...
Add documentation describing the device-tree properties for slpi
pinctrl driver. This documentation is ported from msm-4.14
commit "5bea378b89811e".
Change-Id: I31c561e470ea098c71a008d7fc7a4b4182895fa5
2020-04-14 09:54:59 +05:30
Mukesh Ojha
d7dd7a4285
bindings: pinctrl: Add device-tree bindings for Shima pinctrl driver
...
Add documentation describing the device-tree properties for the Shima
pinctrl driver.
Change-Id: Idea0feeffd28fcb774b86c2be597c87103785c95
2020-02-25 23:14:11 -08:00
Raghavendra Rao Ananta
8e8aeba6e5
bindings: pinctrl: Add device-tree bindings for Lahaina pinctrl driver
...
Add documentation describing the device-tree properties for the Lahaina
pinctrl driver.
Change-Id: I620b260119deea86b922c58c0b4a757cd9a4773d
2020-01-21 19:25:45 -08:00
Vignesh Kulothungan
4685ce1971
bindings: Documentation: add QTI audio documentation
...
Add QTI audio documentation for Lahaina.
Change-Id: I6f735fdce2ba30f81868378e86c5b4d65b250134
2020-01-07 16:10:14 -08:00
David Collins
41580198d6
dt-bindings: pinctrl: qcom-pmic-gpio: add PMR735A and PMR735B bindings
...
Update the Qualcomm Technologies, Inc. PMIC GPIO binding
documentation to include compatible strings for PMR735A
and PMR735B PMICs.
Change-Id: I0c7cf3ed5f3b71ccfe2cae0c6ec1d06bcc24b49a
2019-12-11 14:50:23 -08:00
David Collins
b8193e94b5
dt-bindings: pinctrl: qcom-pmic-gpio: add PM*8350* bindings
...
Update the Qualcomm Technologies, Inc. PMIC GPIO binding
documentation to include compatible strings for PM8350,
PM8350B, PM8350C, and PMK8350 PMICs.
Change-Id: I60dc59d8d451863bfbd97934eb00e5cd4acde442
2019-11-01 11:10:06 -07:00
Raghavendra Rao Ananta
e4b1dcc77e
dt-bindings: Add snapshot for 5.4-rc2
...
Add the device-tree bindings' snapshot from tmp-abe0ec5a8133 for
5.4-rc2.
Change-Id: I346809db756dd18a509ce440499d98a7fefecd16
2019-10-16 10:18:01 -07:00
Raghavendra Rao Ananta
430b7fac16
dt-bindings: Add snapshot for 5.3-rc4
...
Add the device-tree bindings' snapshot from tmp-9855ec2fd422 for
5.3-rc4.
Change-Id: I25b0ac9b29c0347f557b87094ede86370a89a0f2
2019-08-22 23:08:38 -07:00
Raghavendra Rao Ananta
cb69c692e1
bindings: pinctrl: Add device-tree bindings for Lahaina pinctrl driver
...
Add documentation describing the device-tree properties for the Lahaina
pinctrl driver.
Change-Id: Ia1b5412ac87e60ff95f6702b33dfb74799663059
2019-06-27 13:51:11 -07:00
Murali Nalajala
719cc9aa79
dt-bindings: Add devicetree bindings to devicetree project
...
Add devicetree bindings snapshot to the devicetree project
Change-Id: I20b46d194bd3b107ddcb3e35283e6dafa27adec1
2019-05-31 16:45:27 -07:00
