mirror of
https://github.com/Evolution-X-Devices/kernel_xiaomi_sm8450-devicetrees
synced 2026-02-01 08:51:30 +00:00
229b528f41d257c549dcd80ab3dbed92d9f9fa8f
9 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Venkata Narendra Kumar Gutta
|
229b528f41 |
Merge tag 'kernel.lnx.5.4-200305.1' into msm-waipio
* tag 'kernel.lnx.5.4-200305.1': ARM: dts: msm: Add the CX GDSC to the IOMMU device ARM: dts: msm: Move IOMMU clocks to the GPU device ARM: dts: msm: Enable USB secondary port on Lahaina bindings: power: supply: Add thermal mitigation for qcom,battery-charger ARM: dts: msm: Add dummy clock nodes for clock controllers for SHIMA ARM: dts: msm: enable haptics for Lahaina QRD ARM: dts: msm: Update S12B and S1C voltages ARM: dts: msm: add support for dynamic port map ARM: dts: msm: add wil6210 pinctrl configurations for Lahaina ARM: dts: msm: Add NFC I3C device node for Lahaina ARM: dts: msm: Enable SD card support on Lahaina ARM: dts: msm: Add SD card bus voting details for Lahaina ARM: dts: msm: Add CVP AXI reset pulse ARM: dts: msm: Add stub regulators for shima ARM: dts: msm: add route between va and swr dmic's Revert "ARM: dts: msm: remove hdmi codec enable" ARM: dts: msm: update SWR_DMIC to 0 on Lahaina QRD device ARM: dts: msm: Mark APPS SMMU interconnect votes as active-only dt-bindings: Document qcom,active-only ARM: dts: qcom: Update trusted vm DT entries ARM: dts: msm: Add pinctrl node for TLMM on Shima SoC bindings: pinctrl: Add device-tree bindings for Shima pinctrl driver ARM: dts: msm: Add initial device tree for Shima ARM: dts: msm: Correct cmb size of turing llm turing for lahaina ARM: dts: msm: add DMIC DT node for QRD DMIC device ARM: dts: msm: Add camera device tree inclusions for Lahaina ARM: dts: qcom: specify ADC channels for Lahaina PMIC temp-alarm devices ARM: dts: msm: Update devicetree to enable FM on lahaina ARM: dts: msm: Add ADC support for Lahaina ARM: dts: msm: set PMIC thermal zone trip points to critical for Lahaina ARM: dts: msm: Update S12B and S1C voltages ARM: dts: msm: Add fix for SW_CTRL mapped to wrong GPIO66 on MSM side ARM: dts: msm: remove hdmi codec enable ARM: dts: msm: add external audio codec ARM: dts: msm: Correct the interconnect names node ARM: dts: msm: Open up gpu power levels upto NOM ARM: dts: msm: Add hwkm node for lahaina bindings: Add device-tree bindings for hwkm driver ARM: dts: msm: Add camera device tree inclusions for Lahaina ARM: dts: msm: Add WLAN updates to HSP DTSI overlays ARM: dts: msm: Add ICE region for UFS ARM: dts: msm: update PCIe0 and PCIe1 PHY for lahaina v1 ARM: dts: msm: Fix FM chip ON issue ARM: dts: msm: Add snapshot of memshare dt documentation ARM: dts: msm: Add support for FM in lahaina platform dt-bindings: thermal: qcom-adc-tm: add PMIC7 ADC_TM_IIO compatible string dt-bindings: msm: add snapshot of msm_11ad doc ARM: dts: msm: add swr dmics as aux dev ARM: dts: msm: Update CNSS S12B voltage level to 1.35v ARM: dts: msm: Update soundwire DMIC configuration on Lahaina ARM: dts: msm: update PCIe0 and PCIe1 CLKREQ default func select on lahaina ARM: dts: msm: Add dt node for Focaltech touch IC ARM: dts: msm: Add tpdm lpass lpi for lahaina ARM: dts: msm: Add cti trig_out gpio for Lahaina ARM: dts: msm: Add dt node for ST Micro touch IC ARM: dts: msm: add gpio pincntrl for touch ARM: dts: msm: fix DSI reset gpio pincntrl ARM: dts: msm: update audio dt node for lahaina qrd device ARM: dts: qcom: Add regulator changes for Lahaina ARM: dts: msm: Reorganize the pinctrl node ARM: dts: qcom: Rename lahaina-svm1 to trustedvm ARM: dts: msm: update i2c slave address for fsa4480 on Lahaina ARM: dts: msm: Add a new device tree file for HSP configuration ARM: dts: msm: Add VBUS/ID configuration for USB secondary port on Lahaina ARM: dts: msm: update audio device tree on lahaina ARM: dts: msm: Add usb_audio_qmi_dev node ARM: dts: msm: Fix the gem_noc node address and reg size ARM: dts: msm: Disable tpdm shrm for Lahaina ARM: dts: msm: Enable turing llm tpdm for lahaina ARM: dts: msm: Add mem_dump node for lahaina ARM: dts: msm: disable second USB port for Lahaina QRD dt-bindings: haven: Add bindings for qcom,vm-1.0 ARM: dts: msm: Rectify I3C node DT properties ARM: dts: qcom: add flash/torch LEDs on PM8350C for Lahaina platforms ARM: dts: msm: Disable USB secondary port on Lahaina ARM: dts: qcom: Reserved GuestVM memory and add its PIL driver dt-bindings: Add bindings for guestvm-loader ARM: dts: msm: Add permittable RFA2 (min,max) voltage ARM: dts: msm: Limit ETR iova range for lahaina ARM: dts: msm: Add IPCC test nodes for end to end verification ARM: dts: msm: Add CNSS2 node for Lahaina ARM: dts: msm: Update dtsi for page recycle and cleanup ARM: dts: qcom: update RPMh regulator min/max voltage limits for Lahaina ARM: dts: msm: update PCIe L5 and L6 current vote on lahaina ARM: dts: msm: Add Altmode PMIC GLINK client for Lahaina bindings: Add altmode-glink ARM: dts: msm: Restrict default CMA region below 0xE0000000 ARM: dts: qcom: add Glink SPMI debug controller device for Lahaina ARM: dts: msm: include display platform DT files bindings: spmi: add QTI Glink SPMI debug controller binding documentation ARM: dts: msm: add proxy votes for display regulators arm64: dts: qcom: Add secondary VM dts file for lahaina ARM: dts: msm: Correct the typo of remote-endpoint for lahaina ARM: dts: msm: limit gear to 3 for Lahaina ARM: dts: qcom: add haptics on PM8350B for Lahaina CDP/MTP ARM: dts: msm: Update Lahaina USB3 QMP UNI PHY init settings ARM: dts: msm: Hot fix for Lahaina ARM: dts: qcom: Link restart_reason nvmem cell to qcom,pshold ARM: dts: qcom: add nvmem cell for PMK8350 SDAM2 restart reason ARM: dts: msm: enable PCIe0 and PCIe1 on lahaina dt-bindings: Document the qcom,dynamic-heap binding dt-bindings: Add device-tree bindings for the memory sharing driver ARM: dts: msm: add PMIC Glink and clients for Lahaina ARM: dts: msm: Update fastrpc SIDs and masks ARM: dts: qcom: add VDD_MX and CX subnodes for MMCX dependencies on Lahaina ARM: dts: msm: Enable video driver ARM: dts: qcom: Update limit-rate and add limit-phy-submode on Lahaina ARM: dts: msm: set MSR range in CSR for Lahaina dt-bindings: extcon-usb-gpio: Document optional vbus-out-gpio ARM: dts: msm: Update changes for audio device tree on Lahaina ARM: dts: msm: Fix secondary USB port related aggre_noc clock ARM: dts: msm: add initial PHY sequence for PCIe0 and PCIe1 on lahaina ARM: dts: msm: add PCIe pipe clk mux and ext src to PCIe clock for lahaina ARM: dts: msm: add aggre_noc_pcie_*_axi_clk for PCIe on lahaina ARM: dts: msm: Add dtsi changes for qbt_handler dt-bindings: Add documentation for qbt_handler ARM: dts: msm: Add TSENS thermal nodes for lahaina ARM: dts: qcom: change all rpmh-regulator LDO default modes to HPM ARM: dts: msm: Do not create logical mappings for the secure CDSP heap ARM: dts: msm: Disable watchdog for Lahaina-RUMI ARM: dts: msm: Update the arch_timer frequency ARM: dts: msm: Specify address/size cells for &soc on lahaina-rumi dt-bindings: input: qcom-hv-haptics: Add initial binding document ARM: dts: msm: Add secure display heap ARM: dts: msm: Add alias for HSUART node ARM: dts: qcom: switch to I2C control of PM8008 PMIC regulators for Lahaina ARM: dts: msm: Include ipcc_test dtsi file in lahaina.dtsi file ARM: dts: msm: vidc: Add register value mask ARM: dts: msm: Fix ufs OCS error ARM: dts: msm: Fix USB PHY resets ARM: dts: msm: Add interconnects to USB on Lahaina dt-bindings: usb: Document interconnects usage for qcom,dwc-usb3-msm bindings: qti-flash: Fix slave id for pm8350c in DT example dt-bindings: Add snapshot of QPNP AMOLED regulator bindings bindings: soc: qcom: add QTI battery glink debug ARM: dts: msm: Add PWM and RGB LED devices for PM8350C ARM: dts: msm: add a CX, MX and MMCX Turbo level proxy request for Lahaina ARM: dts: qcom: update RPMh regulator voltage limits for Lahaina ARM: dts: msm: Add QSEE IRQ bridge entry for Lahaina ARM: dts: msm: Add device tree overlay for Lahaina CDP ARM: dts: msm: Add regulator entries for Lahaina ARM: dts: msm: add qcom,fastrpc-gids property on Lahaina ARM: dts: msm: Update supply routing for swr dmic on Lahaina bindings: pinctrl: Add device-tree bindings for Lahaina pinctrl driver ARM: dts: msm: add display sde nodes to target dtsi ARM: dts: msm: Replace swr dmic mic bias number on Lahaina bindings: Documentation: Update swr mic device tree documentation ARM: dts: msm: Add and enable disp rsc support for Lahaina ARM: dts: msm: add proxy consumers for L5B and L6B regulators on Lahaina dt-bindings: regulator: add rpmh-regulator bindings dt-bindings: regulator: add refgen regulator bindings ARM: dts: msm: Add SD card entries for Lahaina ARM: dts: msm: Add bluetooth power and slimbus slave node ARM: dts: msm: Add regmap and clocks for interconnects on Lahaina ARM: dts: msm: Add swr dmic nodes on Lahaina bindings: Documentation: Update swr mic device tree documentation bindings: Documentation: Add swr mic device tree documentation dt-bindings: add documentation for leds-qti-flash bindings: power: supply: add QTI battery charger ARM: dts: msm: Do not bypass SMMU for ufshc dt-bindings: Add dt binding for Focaltech driver ARM: dts: msm: fix ipa smp2p node issue ARM: dts: msm: Add the lahaina gpu dtsi ARM: dts: msm: update DPC properties for Lahaina ARM: dts: msm: Change the audio routing sequence ARM: dts: msm: add documentation qcom,tx-wrapper-cache-max-size ARM: dts: msm: add qcom,tx-wrapper-cache-max-size property ARM: dts: msm: Add the offlineable memory sizes for Lahaina ARM: dts: msm: Update audio device tree overlay for lahaina ARM: dts: msm: Add turing etm support for Lahaina ARM: dts: qcom: Remove UFS PHY reset control on Lahaina ARM: dts: msm: add pinctrl information for Lahaina target bindings: Documentation: Add wsa883x device tree documentation dt-bindings: regulator: pm8008-regulator: add OCP interrupt support ARM: dts: msm: Move apps_rsc before interconnect devices ARM: dts: msm: Set USB mode as peripheral only on Lahaina bindings: add audio device tree for lahaina bindings: Documentation: add QTI audio documentation ARM: dts: msm: Add USB Uni PHY related device node on Lahaina ARM: dts: msm: Update and enable the debug cc measure nodes ARM: dts: msm: Add QTI crypto device-tree node for Lahaina bindings: Add device-tree bindings for QTI crypto drivers dt-bindings: input: Add dt bindings for STMicro ARM: dts: qcom: Add dtsi node entry for Slimbus in lahaina ARM: dts: msm: use clock driver to vote for IPA code ARM: dts: msm: Add ACTLR settings for the APPS and GFX SMMUs dt-bindings: nfc: Add Documentation for I2C NFC devicetree node ARM: dts: msm: Fix GSI IRQ type warnings on lahaina dt-bindings: thermal: Add ADC_TM documentation for PMIC7 ARM: dts: msm: Add TSENS node support for lahaina ARM: dts: msm: Add jtagmm device node for lahaina ARM: dts: msm: Add initial device tree for Lahaina QRD Module ARM: dts: msm: update port number to hex format ARM: dts: msm: Add qseecom node for Lahaina ARM: dts: msm: Enable s1 in fastmap for QUPv3 drivers on lahaina ARM: dts: msm: Add 2-wire UART node for lahaina ARM: dts: msm: Add cpufreq-hw node for Lahaina dt-bindings: ufs: Add compitable string for V4 UFS PHY on Lahaina ARM: dts: msm: add reset support for UFS on Lahaina ARM: dts: msm: Add pshold to Lahaina dt-bindings: qti-tri-led: Update reg definition dt-bindings: pwm-qti-lpg: Update reg definition ARM: dts: qcom: add dt entry needed for avb dt-bindings: android: add entries for android ARM: dts: msm: Enable QRNG driver for lahaina dt-bindings: cpufreq: Add msm-cpufreq bindings snapshot dt-bindings: Add USB audio QMI driver bindings ARM: dts: msm: Add SPS driver node for Lahaina ARM: dts: msm: Add etm save/restore for Lahaina dt-bindings: rng: Add DT binding entry for msm-rng ARM: dts: msm: Disable usb1 on Lahaina RUMI ARM: dts: msm: Add EUD node for Lahaina ARM: dts: msm: Add device tree overlay support for Lahaina ARM: dts: msm: add documentation tx-napi dt-bindings: slim-msm-ngd: Add dt bindings for slimbus driver dt-bindings: nfc: Add Documentation for I3C NFC devicetree node ARM: dts: msm: Add coresight device tree for Lahaina dt-bindings: devfreq: add support for L3 voting in devfreq_icc dt-bindings: devfreq: add support for shared core-dev tables dt-bindings: iio: adc: Add PMIC7 VADC bindings ARM: dts: msm: add volume up gpio-keys device for Lahaina boards ARM: dts: msm: add PMK8350 PON_PBS and PON_HLOS devices dt-bindings: input: add qpnp-power-on bindings ARM: dts: msm: add SPMI debug bus for Lahaina boards ARM: dts: msm: add PMIC devices for Lahaina ARM: dts: msm: Specify clock-output-names for sleep_clk on Lahaina ARM: dts: qcom: Add QUP ICC Core2x path IDs for QUPv3 node ARM: dts: msm: add initial PCIe nodes for lahaina dt-bindings: arm: msm: remove msm-bus and add ICC for PCIe dt-bindings: arm: msm: add initial devicetree documenation for MSI dt-bindings: arm: msm: add initial devicetree documentation for PCIe dt-bindings: clocks: Add debugcc clock bindings for Lahaina dt-bindings: pinctrl: qcom-pmic-gpio: add PMR735A and PMR735B bindings dt-bindings: rtc: rtc-pm8xxx: Add binding documentation for pmk8350 rtc ARM: dts: msm: add SPMI PMIC arbiter device for Lahaina ARM: dts: msm: Add L3 devfreq devices for Lahaina ARM: dts: msm: Update SIDs for test devices dt-bindings: cpufreq: Add cpufreq firmware bindings ARM: dts: msm: add spss_utils to lahaina ARM: dts: msm: enable ipa smp2p ARM: dts: msm: Update the smem size for Lahaina ARM: dts: msm: Add limit rate on G4 for Lahaina rumi ARM: dts: msm: Add ufs bus voting details for Lahaina ARM: dts: qcom: Add spcom to support SPU on lahaina ARM: dts: msm: Add ion heap for Secure Processor on lahaina ARM: dts: msm: Add interconnect l3 epss devices for Lahaina ARM: dts: msm: Configure SMMU in bypass mode for Lahaina RUMI ARM: dts: msm: Add LLCC and DDR devfreq devices for Lahaina dt-bindings: interconnect: add EPSS L3 bindings ARM: dts: msm: Add QUPv3 SE and GPI DT node for lahaina dt-bindings: Add dt bindings for jtagv8 driver dt-bindings: qti-tri-led: Add bindings dt-bindings: pwm-qti-lpg: Add bindings dt-bindings: Add snapshot of thermal devicetree bindings ARM: dts: msm: enable rmtfs for Lahaina dt-bindings: Add device-tree bindings for EUD driver ARM: dts: msm: Update Lahaina's memory map to V3 dt-bindings: devfreq: add support for memory latency QoS voting dt-bindings: devfreq: add support for new memlat design dt-bindings: devfreq: add support for different ddr types dt-bindings: kgsl: Add device tree bindings for the KGSL GPU driver dt-bindings: perf: Add DT bindings for LLCC_PMU_VER2 driver dt-bindings: perf: Add DT bindings for QCOM LLCC PMU driver dt-bindings: devfreq: Add DT bindings to support OPP BW values dt-bindings: Add DT bindings to support compute bound logic ARM: dts: msm: Add vdd_cx-supply node to gcc on Lahaina dt-bindings: clocks: Update gcc clock bindings for Lahaina ARM: dts: msm: Add vdd_mx-supply node to gpu cc on Lahaina dt-bindings: clocks: Update gpucc clock bindings for Lahaina bindings: Add device-tree bindings for qseecom driver ARM: dts: msm: Add tz_log node for Lahaina bindings: Add device-tree bindings for tz_log driver dt-bindings: devfreq: Add DT bindings to add a stall cycle count event dt-bindings: Add DT bindings for specifying the count factor dt-bindings: devfreq: Make the freq-table property optional dt-bindings: devfreq: Add DT bindings to configure byte MID match ARM: dts: msm: Add smcinvoke node for Lahaina bindings: Add device-tree bindings for smcinvoke driver ARM: dts: msm: add lan-rx-napi property ARM: dts: msm: add PIL spss node to lahaina dt-bindings: Add camera devicetree bindings for lahaina ARM: dts: msm: remove SPI config property ARM: dts: msm: Update USB interrupt trigger types on Lahaina ARM: dts: msm: Enable dcc on lahaina ARM: dts: msm: update clock_rpmh device node for Lahaina dt-bindings: clock: Add rpmh clock bindings for Lahaina dt-bindings: add devicetree binding for fsa4480 ARM: dts: msm: Add USB PHY devices and related resources on Lahaina bindings: add support for qcom,ucsi-glink dt-bindings: devfreq: Add dt-bindings for BWMON HW version 5 dt-bindings: devfreq: Add DT bindings for ARM memlat driver dt-bindings: devfreq: Add support for BWMON HW version 4 dt-bindings: devfreq: Add dt-bindings for BWMON HW version 3 dt-bindings: devfreq: Add the dt bindings for clock prepare dt-bindings: devfreq: Add DT bindings for devfreq_simple device dt-bindings: devfreq: Add dt-bindings for BWMON HW version 2 dt-bindings: devfreq: Add DT bindings for bimc bwmon driver dt-bindings: devfreq: Add DT bindings for devfreq_icc device ARM: dts: msm: IPA msm bus dtsi update for Lahaina dt-bindings: i3c-master-qcom-geni: Add DT bindings for I3C GENI driver ARM: dts: msm: Update and enable clk-aop clks on Lahaina ARM: dts: qcom: add virt_clk interconnect provider dt-bindings: interconnect: Add clk_virt documentation on Lahaina ARM: dts: msm: Add USB BAM device node on Lahaina ARM: dts: msm: Add support for modem PIL ARM: dts: msm: Add SCM node dt-bindings: regulator: add proxy consumer bindings dt-bindings: pmic-glink: add qcom,pmic-glink-channel property ARM: dts: msm: Add GDSC regulator references for Lahaina's SMMUs bindings: add support for qcom,pmic-glink ARM: dts: msm: Add SSC based sensors with SLPI PIL on Lahaina ARM: dts: msm: Add modem smp2p for Lahaina ARM: dts: msm: Document kona device binding ARM: dts: msm: Add ARM PMU node for Lahaina dt-bindings: spi-msm-geni: Add DT bindings for SPI GENI driver ARM: dts: msm: Add CVP device tree for Lahaina ARM: dts: msm: add reset control support for UFS PHY on Lahaina ARM: dts: msm: Add embedded UFS device reset GPIO on Lahaina dt-bindings: nvmem: add bindings for QTI SDAM devices dt-bindings: soc: qcom: add bindings for QTI PBS devices dt-bindings: platform: msm: add bindings for qpnp-revid devices dt-bindings: spmi: spmi-pmic-arb-debug: add clock management support dt-bindings: spmi: add SPMI PMIC arbiter debug bus bindings dt-bindings: mfd: add qcom-i2c-pmic bindings ARM: dts: msm: Add Lahaina video configuration dt-bindings: pinctrl: qcom-pmic-gpio: add PM*8350* bindings dt-bindings: mfd: qcom,spmi-pmic: add documentation for qcom,can-sleep dt-bindings: gpi: Add DT bindings for GPI dmaengine driver ARM: dts: msm: Update and enable graphics clock controller on Lahaina dt-bindings: clocks: Add gpu cc clock controller bindings for Lahaina ARM: dts: msm: Add IPA dtsi entry for Lahaina dt-bindings: i2c-msm-geni: Add DT bindings for I2C GENI driver ARM: dts: msm: Add QUPV3 SE dt node for uart on Lahaina dt-bindings: Add device-tree bindings for slimbus slave driver dt-bindings: usb: Document USB qcom,usb-charger property ARM: dts: msm: add dt nodes for adsp & cdsp PIL for Lahaina ARM: dts: msm: change lan_rx_napi to lan-rx-napi bindings: usb_bam: Add USB BAM driver related documentation ARM: dts: msm: Update bus entries in pil-video node dt-bindings: media: Add video driver bindings for Lahaina ARM: dts: msm: Update USB device nodes on Lahaina dt-bindings: usb: Add bindings for MSM SSUSB dt-bindings: usb: Document dwc3 xhci-imod-value property ARM: dts: msm: add dt node for video ARM: dts: msm: Add camera pinctrl info for Lahaina bindings: Add USB PHY drivers related documentation ARM: dts: msm: Add glink entries for Lahaina ARM: dts: msm: Update and enable the cam cc node on Lahaina dt-bindings: clocks: Add cam cc clock controller bindings for Lahaina dt-bindings: Add snapshot for 5.4-rc2 ARM: dts: msm: add documentation lan_rx_napi ARM: dts: msm: Enable the secure carveout heap on Lahaina ARM: dts: msm: Unstub the DISP_CC node for Lahaina dt-bindings: clk: Add DISP_CC clock driver bindings for Lahaina ARM: dts: msm: Unstub the VIDEO_CC node for Lahaina dt-bindings: clk: Add VIDEO_CC clock driver bindings for Lahaina ARM: dts: msm: add initial device tree for Lahaina low power modes ARM: dts: msm: Add glink entry for spss on Lahaina ARM: dts: msm: Add shmbridge node for Lahaina bindings: Add device-tree bindings for qtee_shmbridge driver dt-bindings: Add spcom documentation dt-bindings: Add spss_utils documentation ARM: dts: msm: add wakeup parent for Lahaina dt-bindings: arm: snapshot of psci bindings dt-bindings: Introduce soc sleep stats bindings for QTI SoCs dt-bindings: add device bindings for DDR stats node dt-bindings: msm: add PM drivers device bindings ARM: dts: qcom: add USB GDSC supplies for Lahaina ARM: dts: qcom: switch PM8350 LDO 7 to RPMh control for Lahaina ARM: dts: qcom: add GDSC devices for Lahaina ARM: dts: qcom: add refgen regulator device for Lahaina dt-bindings: regulator: add refgen regulator bindings ARM: dts: qcom: switch to RPMh controlled PMIC regulators for Lahaina ARM: dts: qcom: add PMIC PMR735A regulator devices for Lahaina ARM: dts: msm: Add bcm voter devices for lahaina dt-bindings: interconnect: Update QTI SDM845 DT bindings dt-bindings: regulator: add rpmh-regulator bindings ARM: dts: qcom: update PMIC regulator voltage limits for Lahaina dt-bindings: of: irq: document properties for wakeup interrupt parent dt-bindings: pdc: Add SPI config register ARM: dts: msm: add capacity and DPC properties for Lahaina ARM: dts: msm: Add WDT node for Lahaina ARM: dts: msm: Update and enable the clock_gcc node on Lahaina dt-bindings: clocks: add gcc clock controller bindings for Lahaina dt-bindings: dma: sps: Add dt binding for SPS driver dt-bindings: regulator: add PMIC PM8008 regulator bindings ARM: dts: msm: remove uncessary node from IPA nodes for Lahaina SoC ARM: dts: msm: Correct the UFS PHY address space for Lahaina ARM: dts: msm: Use dt-bindings header for ION on Lahaina ARM: dts: msm: Add smp2p sleepstate node for Lahaina ARM: dts: msm: Add AOP QMP nodes for Lahaina ARM: dts: msm: Update the timer clock frequence as per RUMI E3.0 dt-bindings: arm: Add CSR/TPDM/TPDA/TGU/Remote ETM support ARM: dts: msm: add fastrpc and cdsp device nodes for lahaina dt-bindings: Add device-tree bindings for Watchdog driver ARM: dts: msm: add RSC device bindings for lahaina ARM: dts: msm: add PDC device bindings for Lahaina dt-bindings: Add documentation for the mem-offline driver ARM: dts: msm: Add core hang detection to dt bindings: Add qcom,msm-hang-detect schema dt-bindings: arm: coresight: add trace unit power property dt-bindings: Add dt bindings for memory dump dt-bindings: Add dt bindings for dcc dt-bindings: Add device-tree bindings for BT power driver dt-bindings: regulator: gdsc-regulator: add property for register retention dt-bindings: clk: gdsc-regulator: add parent supply property dt-bindings: regulator: add gdsc-regulator bindings dt-bindings: clock: add rpmh clock bindings for Kona dt-bindings: clk: add AOP clock controller bindings dt-bindings: qdsp: device-tree documentation for fastrpc and CDSP loader dt-bindings: Add device-tree bindings for rtc6226 driver ARM: dts: msm: Add IPA node for Lahaina SoC bindings: serial: Binding for serial UART driver bindings: qcom-geni-se: Common GENI driver dt-bindings: Add snapshot for 5.3-rc4 dt-bindings: qdsp: Device tree documentation for sensors ssc ARM: dts: msm: Add initial ION heaps for Lahaina ARM: dts: msm: Make the CDSP secure carveout mappable on Lahaina ARM: dts: msm: add msm_rtb tracing bindings: Add qcom,msm-rtb schema ARM: dts: msm: Add USB device nodes for Lahaina ARM: dts: msm: Add HWSPINLOCK, SMEM and SMP2P for Lahaina ARM: dts: msm: Disable the coherent KGSL IOMMU test device ARM: dts: msm: Fix major and minor versions for Lahaina boards dt-bindings: net: qrtr: Add FIFO transport bindings dt-bindings: arm: msm: Add sleepstate-smp2p bindings dt-bindings: arm: msm: Introduce qsee_ipc_irq_bridge bindings dt-bindings: arm: msm: Introduce qcom,qsee_irq bindings dt-bindings: soc: qcom: Introduce Glink Pkt bindings dt-bindings: soc: qcom: Introduce Glink Probe bindings ARM: dts: msm: Add device-tree entry for IMEM ARM: dts: msm: Add support for SCM PAS dt-bindings: Add device-tree bindings for IMEM bindings: Add device-tree bindings for secure PIL driver dt-bindings: Introduce QMP debugfs client bindings dt-bindings: mailbox: Introduce MSM_QMP bindings dt-bindings: kryo-edac: add kryo edac bindings ARM: dts: msm: Add edac node for Lahaina SoC ARM: dts: msm: Enable the graphics SMMU on Lahaina dt-bindings: Add device-tree bindings for CNSS2 driver ARM: dts: msm: Add IPCC test nodes for end to end verification ARM: dts: msm: Add IPCC node for Lahaina dt-bindings: Add device-tree bindings for IPCC driver ARM: dts: msm: Make LLCC node compatible with "qcom,lahaina-llcc" dt-bindings: LLCC: Add "qcom,lahaina-llcc" compatible property dt-bindings: Add device-tree bindings for the ION memory manager ARM: dts: msm: Add the SMMU devices for Lahaina ARM: dts: msm: Add the secure buffer device for Lahaina dt-bindings: Merge all IOMMU documentation from msm-4.19 to msm-lahaina ARM: dts: msm: Add device-tree node for LLCC driver dt-bindings: LLCC: Add "qcom,llcc-v2" compatible property ARM: dts: msm: add ufs device support for Lahaina ARM: dts: msm: add stub interconnect devices for Lahaina bindings: usb: Add bindings for USB PHY on QTI emulation platform ARM: dts: msm: Add SCM node for Lahaina SoC bindings: Add device-tree bindings for SCM driver ARM: dts: msm: Add memory carveouts as per Lahaina v2 memory map dt-bindings: interconnect: add interconnect bindings dt-bindings: Add snapshot from tmp-f686d9f ARM: dts: msm: Add pinctrl node for TLMM on Lahaina SoC bindings: pinctrl: Add device-tree bindings for Lahaina pinctrl driver ARM: dts: msm: add stub clock devices for Lahaina dt-bindings: clocks: add dummycc bindings bindings: Add snapshot of bindings with GPL-2.0 or BSD-2-Clause license ARM: dts: msm: add stub regulator devices for Lahaina dt-bindings: regulator: add stub regulator bindings ARM: dts: msm: Add initial device tree for Lahaina dt-bindings: msm: Add compatible strings for Lahaina dt-bindings: Snapshot of msm device tree binding document ARM: dts: vendor: Add an initial Makefile to the vendor dt-bindings: Add devicetree bindings to devicetree project Initial empty repository Change-Id: Icb722bcaa651702f1843582ae7f1bd9807681018 |
||
|
Venkata Narendra Kumar Gutta
|
b0e5152a74 |
dt-bindings: Add devicetree bindings to devicetree project
Add devicetree bindings snapshot to the devicetree project.
This snapshot is taken as of the
'commit 5fba1b18cfc72e264e5f3ce49020ed322aa6ac9f ("Merge 5.6-rc3
into android-mainline")' of the kernel project.
Change-Id: Ia087ab2b7d4a2616ea446a69683a8b5b821d0448
|
||
Lina Iyer
|
3b1a0b4eeb |
ARM: dts: msm: remove SPI config property
Newer SoC's do not need the SPI register to be written from secure firmware. Remove the DT property. Change-Id: If02010f92f5830013966c5344dce93911e055b1b |
||
Raghavendra Rao Ananta
|
e4b1dcc77e |
dt-bindings: Add snapshot for 5.4-rc2
Add the device-tree bindings' snapshot from tmp-abe0ec5a8133 for 5.4-rc2. Change-Id: I346809db756dd18a509ce440499d98a7fefecd16 |
||
|
Lina Iyer
|
6eb89f9ee2 |
dt-bindings: of: irq: document properties for wakeup interrupt parent
Some interrupt controllers in a SoC, are always powered on and have a select interrupts routed to them, so that they can wakeup the SoC from suspend. Add wakeup-parent DT property to refer to these interrupt controllers. Change-Id: I3601e3a037250a77253dce281c5f503400a6dc26 |
||
|
Lina Iyer
|
65b8a22ac0 |
dt-bindings: pdc: Add SPI config register
In addition to configuring the PDC, additional registers that interface the GIC have to be configured to match the GPIO type. The registers on some QCOM SoCs are access restricted, while on other SoCs are not. They SoCs with access restriction to these SPI registers need to be written from the firmware using the SCM interface. Add a flag to indicate if the register is to be written using SCM interface. Change-Id: I89ba52ded2451071973b81c83a53964d7ec2e486 |
||
|
Raghavendra Rao Ananta
|
430b7fac16 |
dt-bindings: Add snapshot for 5.3-rc4
Add the device-tree bindings' snapshot from tmp-9855ec2fd422 for 5.3-rc4. Change-Id: I25b0ac9b29c0347f557b87094ede86370a89a0f2 |
||
|
Raghavendra Rao Ananta
|
77ef8a5391 |
bindings: Add snapshot of bindings with GPL-2.0 or BSD-2-Clause license
Add snapshot of the device-tree bindings' YAML files that has GPL-2.0 or BSD-2-Clause license. The snapshot is taken from Android Common Kernel's android-mainline branch as of commit-id <b41e0f1228c15d6> (ANDROID: update abi_gki_aarch64.xml for 5.2-rc5). Change-Id: I03c75ed9aeec161dac792e18f5ab991a94de6dce |
||
Murali Nalajala
|
719cc9aa79 |
dt-bindings: Add devicetree bindings to devicetree project
Add devicetree bindings snapshot to the devicetree project Change-Id: I20b46d194bd3b107ddcb3e35283e6dafa27adec1 |