Evolution-x/hardware_interfaces
1
0
Fork 0
mirror of https://github.com/Evolution-X/hardware_interfaces synced 2026-02-01 21:37:44 +00:00
Code Issues Packages Projects Releases Wiki Activity

Fix comments for link capacity and signal strength reporting. am: 591387fb4f

Browse Source 
am: f35e02a910

Change-Id: Iaacb981b7268db75d761b6612c1a6f99f77ee7f4
This commit is contained in:
Eric Schwarzenbach
2018-02-16 05:49:27 +00:00
committed by android-build-merger
parent ef9caf1db4 f35e02a910
commit bc83e6b3f5
2 changed files with 20 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

25
radio/1.2/IRadio.hal
View File

@@ -50,7 +50,7 @@ interface IRadio extends @1.1::IRadio {
*
* @param serial Serial number of request.
* @param indicationFilter 32-bit bitmap of IndicationFilter. Bits set to 1 indicate the
* indications are enabled. See @1.2::IndicationFilter for the definition of each bit.
* indications are enabled. See @1.2::IndicationFilter for the definition of each bit.
*
* Response callback is IRadioResponse.setIndicationFilterResponse()
*/
@@ -68,12 +68,12 @@ interface IRadio extends @1.1::IRadio {
*
* @param serial Serial number of request.
* @param hysteresisMs A hysteresis time in milliseconds to prevent flapping. A value of 0
* disables hysteresis.
* disables hysteresis.
* @param hysteresisDb An interval in dB defining the required magnitude change between reports.
* hysteresisDb must be smaller than the smallest threshold delta. An
* interval value of 0 disables hysteresis.
* hysteresisDb must be smaller than the smallest threshold delta. An
* interval value of 0 disables hysteresis.
* @param thresholdsDbm A vector of trigger thresholds in dBm. A vector size of 0 disables the
* use of thresholds for reporting.
* use of thresholds for reporting.
* @param accessNetwork The type of network for which to apply these thresholds.
*/
oneway setSignalStrengthReportingCriteria(int32_t serial, int32_t hysteresisMs,
@@ -91,18 +91,17 @@ interface IRadio extends @1.1::IRadio {
*
* @param serial Serial number of request.
* @param hysteresisMs A hysteresis time in milliseconds to prevent flapping. A value of 0
* disables hysteresis.
* disables hysteresis.
* @param hysteresisDlKbps An interval in kbps defining the required magnitude change between DL
* reports. hysteresisDlKbps must be smaller than the smallest threshold
* delta. A value of 0 disables hysteresis.
* reports. hysteresisDlKbps must be smaller than the smallest threshold delta. A value of 0
* disables hysteresis.
* @param hysteresisUlKbps An interval in kbps defining the required magnitude change between UL
* reports. hysteresisUlKbps must be smaller than the smallest threshold
* delta. A value of 0 disables hysteresis.
* reports. hysteresisUlKbps must be smaller than the smallest threshold delta. A value of 0
* disables hysteresis.
* @param thresholdsDownlinkKbps A vector of trigger thresholds in kbps for downlink reports. A
* vector size of 0 disables the use of DL thresholds for
* reporting.
* vector size of 0 disables the use of DL thresholds for reporting.
* @param thresholdsUplinkKbps A vector of trigger thresholds in kbps for uplink reports. A
* vector size of 0 disables the use of UL thresholds for reporting.
* vector size of 0 disables the use of UL thresholds for reporting.
* @param accessNetwork The type of network for which to apply these thresholds.
*/
oneway setLinkCapacityReportingCriteria(int32_t serial, int32_t hysteresisMs,

10
radio/1.2/types.hal
View File

@@ -361,11 +361,17 @@ struct CardStatus {
struct LinkCapacityEstimate {
/**
* Estimated downlink capacity in kbps.
* Estimated downlink capacity in kbps. This bandwidth estimate shall be the estimated
* maximum sustainable link bandwidth (as would be measured at the Upper PDCP or SNDCP SAP).
* If the DL Aggregate Maximum Bit Rate is known, this value shall not exceed the DL-AMBR
* for the Internet PDN connection.
*/
uint32_t downlinkCapacityKbps;
/**
* Estimated uplink capacity in kbps.
* Estimated uplink capacity in kbps. This bandwidth estimate shall be the estimated
* maximum sustainable link bandwidth (as would be measured at the Upper PDCP or SNDCP SAP).
* If the UL Aggregate Maximum Bit Rate is known, this value shall not exceed the UL-AMBR
* for the Internet PDN connection.
*/
uint32_t uplinkCapacityKbps;
};