Merge "dt-bindings: dma: sps: Add dt binding for SPS driver"

bindings/dma/sps/sps.txt

@@ -0,0 +1,47 @@
+SPS (Smart Peripheral Switch) may be used as a DMA engine to move data
+in either the Peripheral-to-Peripheral (a.k.a. BAM-to-BAM) mode or the
+Peripheral-to-Memory (a.k.a. BAM-System) mode. SPS includes BAM (Bus
+Access Module) hardware block, BAM DMA peripheral, and pipe memory.
+
+Required property:
+  - compatible: should be "qcom,msm-sps" or "qcom,msm-sps-4k"
+
+Optional properties:
+  - reg: offset and size for the memory mapping, including maps for
+    BAM DMA BAM, BAM DMA peripheral, pipe memory and reserved memory.
+  - reg-names: indicates various resources passed to driver (via reg
+    property) by name. "reg-names" examples are "bam_mem", "core_mem"
+    , "pipe_mem" and "res_mem".
+  - interrupts: IRQ line
+  - qcom,device-type: specify the device configuration of BAM DMA and
+    pipe memory. Can be one of
+        1 - With BAM DMA and without pipe memory
+        2 - With BAM DMA and with pipe memory
+        3 - Without BAM DMA and without pipe memory
+  - qcom,pipe-attr-ee: BAM pipes are attributed to a specific EE, with
+    which we can know the pipes belong to apps side and can have the
+    error interrupts at the pipe level.
+  - clocks: This property shall provide a list of entries each of which
+    contains a phandle to clock controller device and a macro that is
+    the clock's name in hardware.These should be "clock_rpm" as clock
+    controller phandle and "clk_pnoc_sps_clk" as macro for "dfab_clk"
+    and "clock_gcc" as clock controller phandle and "clk_gcc_bam_dma_ahb_clk"
+    as macro for "dma_bam_pclk".
+  - clock-names: This property shall contain the clock input names used
+    by driver in same order as the clocks property.These should be "dfab_clk"
+    and "dma_bam_pclk".
+
+Example:
+
+	qcom,sps@f9980000 {
+		compatible = "qcom,msm-sps";
+		reg = <0xf9984000 0x15000>,
+		      <0xf9999000 0xb000>,
+		      <0xfe803000 0x4800>;
+		interrupts = <0 94 0>;
+		qcom,device-type = <2>;
+		qcom,pipe-attr-ee;
+		clocks = <&clock_rpm clk_pnoc_sps_clk>,
+			 <&clock_gcc clk_gcc_bam_dma_ahb_clk>;
+		clock-names = "dfab_clk", "dma_bam_pclk";
+	};