This change adds USB BAM device node and required pipe configuration
for USB QDSS BAM2BAM functionality.
Change-Id: Id9023f281e057632da304ff8abfd974dcfc314e6
Add "qcom,pmic-glink-channel" property for pmic glink device so
that the child devices under it can associate with rpmsg device
that is used for Glink channel.
Change-Id: I121103506281970fda7f85176fec58119937ab02
Add references for the GDSC regulators for the APPS and GFX SMMU
devices on Lahaina, to allow the HLOS to vote for these
regulators prior to accessing the respective register spaces.
Change-Id: I6ec4049cd0c17804c3de038f7a821e907d47d3a2
The PMIC Glink device provides the interface for clients to
communicate over GLink for sending/receiving data to/from
charger firmware that runs on a remote subsystem (e.g. ADSP)
which supports charging and gauging. Add the bindings for it.
Change-Id: Ia4f5ff346ebfa773bc0fe3d0410626ea67e1da31
Add device node for SSC sensor device for Kona. This will
create a device node to make userspace clients read sensor
related information.
Add devicetree node for SLPI PIL which facilitates the loading
of SLPI firmware, authentication and bringing it out of reset.
Change-Id: I839e33926e4ff2c5adda823604d17543ae84131c
Add the ARM CPU Performace Monitor Unit (PMU) device-tree node
for measuring various CPU performance events such as cycles,
cache misses, and so on.
Change-Id: I2c5817d4ed97db97fa38b235204175d01c41fed8
Add reset control nodes for UFS PHY so that UFS PHY driver can control its
SW reset through UFS host's address space.
Change-Id: I8ef347733d611af7dfb1a9ecce10f8a5b5898e9b
Add reset GPIO for embedded UFS device on Lahaina, so that UFS driver can
toggle it when UFS device reset is required.
Change-Id: I5e842356475b7485bb6bd144a7d4143de3e42e29
Qualcomm Technologies, Inc. (QTI) SDAM devices provide an
interface for other PMIC peripherals to access the shared
memory found on QTI PMICs.
Change-Id: Ia8ce10171f9cfa5249dc69c7edb4d66cb959ca80
Qualcomm Technologies, Inc. (QTI) Programmable Boot Sequence
(PBS) devices help triggering certain PBS on QTI PMICs when
available for APPS.
Change-Id: I9148ff20220b998b1634fb9c26d462b2a25d6586
Add device tree bindings for QPNP REVID devices that provide
Qualcomm Technologies, Inc. PMIC revision information for other
PMIC peripheral devices upon request.
Change-Id: I966a03d2594c3985083d4083cb7301fe48a93f0f
Add binding documentation for the SPMI debug bus found on SPMI
PMIC arbiter version 5 and above. This debug bus has read and
write access to all PMIC peripherals regardless of ownership
configurations. It cannot be used on production devices because
it is disabled by an eFuse.
Change-Id: I344ddea23ecb09bede5cbdb19197ab52b24dda44
Add bindings for the I2C PMIC Controller. This device handles
interrupts from an I2C PMIC and supports various subnodes which
each correspond to a PMIC peripheral (e.g. LDO regulator, GPIO,
etc).
Change-Id: I82bce50edebd75bf016feca76b9c7db3bc03a6d5
Update the Qualcomm Technologies, Inc. PMIC GPIO binding
documentation to include compatible strings for PM8350,
PM8350B, PM8350C, and PMK8350 PMICs.
Change-Id: I60dc59d8d451863bfbd97934eb00e5cd4acde442
Add documentation for the qcom,can-sleep property. This is used
for slow SPMI busses which may sleep during transactions.
Change-Id: Ib07ffa28a0aa167571501e2493f5f03ad575755e
