Remove GCC_DDRSS_ECPRI_DMA_CLK and GCC_GEMNOC_PCIE_QX_CLK clock ids
from gcc protected-clocks list for CINDER.
Change-Id: I75bccdec6ee5b42b797e631b2541cc427a0a446b
In case, Resource voting like clock/interconnect/pinctrl etc
are not supported by LE VM, we can rely on LA enabled resources.
But Upstream qup common driver is trying to read qup AHB clocks
because of that probe failure is happening. To prevent this issue,
Clock team has added dummy clocks and we added AHB clock entries
in qup common node.
Change-Id: Ie8c3f3149f19eafbdee1e49ee9036d551a60d3ba
Add DT binding documentation for smb1398-charger device.
This snapshot is taken as of msm-5.4 'commit 7d890ddbff34 ("Merge
"dt-bindings: subsystem_sleep_stats: reg is optional property"")'.
Change-Id: I993682faed3f82b547d2a458ab97e96810cf06b6
Add DT binding documentation for smb1355 slave charger device.
This snapshot is taken as of msm-5.4 'commit 7d890ddbff34 ("Merge
"dt-bindings: subsystem_sleep_stats: reg is optional property"")'.
Change-Id: Ia068582f250c137045bbf5bf97166aceff719b5b
Add DT binding documentation for qpnp-qg Qguage device.
This snapshot is taken as of msm-5.4 'commit 7d890ddbff34 ("Merge
"dt-bindings: subsystem_sleep_stats: reg is optional property"")'.
Change-Id: I7406953f2f0b4bfe27bc4f54b04739a18d9ca9ab
Add DT binding documentation for qpnp-smb5 charger device.
This snapshot is taken as of msm-5.4 'commit 7d890ddbff34 ("Merge
"dt-bindings: subsystem_sleep_stats: reg is optional property"")'.
Change-Id: I90e28e4a684909f3cb76dd8a1198c462e1e9e0a0
Add DT binding documentation for leds-qpnp-vibrator-ldo device.
This snapshot is taken as of msm-5.4 'commit 7d890ddbff34 ("Merge
"dt-bindings: subsystem_sleep_stats: reg is optional property"")'.
Change-Id: Ia827f3341d091f82b22942521082648c7e9c7af6
Add DT binding documentation for leds-aw2016 device.
This snapshot is taken as of msm-5.4 'commit 7d890ddbff34 ("Merge
"dt-bindings: subsystem_sleep_stats: reg is optional property"")'.
Change-Id: I0da87973623ec671e41202141eb9e9e0de7214a8
Add stub regulator devices for the SMPS and LDO regulators found
on the PMIC chips which are used on sdxpinn boards. This ensures
that consumers can use the regulators successfully.
Change-Id: Iecbd5d82bbce98351082d76f2af22b1d14b4f63e
Newer hypervisor images have started loading OEMVM at the IPA address it
requests in devicetree (formerly 0xF3600000). This resuls in the below
error
Hotplug memory [0x20400000-0x20600000] exceeds maximum addressable range
[0xc0000000-0x40bfffffff]
At bootup, linux configures memstart_addr to the lowest DDR address passed
by the bootloader, rounded down to PUD_SIZE (1 GB). It assumes that all
memory added via hotplug is above this.
As a temporary workaround, ensure the IPA load address is in the first
1GB of memory. This forces memstart_addr=0, and guarantees memory added
via hotplug will have an acceptable address.
Fixes: 666dd0d373 ("ARM: dts: msm: Update IPA load address for TUIVM")
Change-Id: I7d602d958e44a734de032f7ea4ec5455e75d1ef8
This snapshot is taken as of
'commit 1a15a882776236bf330dc1aa9759809a43103e45
(Merge "ARM: dts: msm: Renaming seeya panels to
90Hz and 60Hz refresh rates")'.
Change-Id: Ib7daa7e7122dec2719df070a15dfbceef3613e9b
Enable different level modem mitigation for bcl thermal zones
for kalama based on latest recommendation.
Change-Id: I053b1fed9cf97a8cdf1e7f8854aa5cccae47f842
This snapshot is taken as of
'commit 1a15a882776236bf330dc1aa9759809a43103e45
(Merge "ARM: dts: msm: Renaming seeya panels to
90Hz and 60Hz refresh rates")'.
Change-Id: Idc837750bc78973bd1162dbb412546ae22151101
