* github.com:MotorolaMobilityLLC/kernel-display-devicetree:
ARM: dts: msm: update UBWC version for kalama
ARM: dts: msm: Enable HDR in 120hz & 90hz vtdr6130 panel on crow
ARM: dts: msm: Enable PU for 120hz VTDR6130 panel on Crow
ARM: dts: msm: update dma addr pool for display for crow target
ARM: dts: msm: Update power ON/OFF sequence of vtdr6130 panel on Crow
ARM: dts: msm: add ramdump display region for crow
ARM: dts: msm: Update power ON/OFF sequence of vtdr6130 panel on Crow
ARM: dts: qcom: add panel information for ECM driver for crow
ARM: dts: msm: add ramdump display region for crow
ARM: dts: msm: update default panel to vtdr6130 120hz on Crow IDPS
ARM: dts: msm: change to enable dp on crow target
ARM: dts: msm: reserve memory region for continuous splash
ARM: dts: msm: update display topology to 221 for vtdr6130 panel on Crow
ARM: dts: msm: enable sde rscc on crow target
ARM: dts: msm: enable ulps for vtdr6130 120hz panel on crow
ARM: dts: msm: change to enable dp on crow target
ARM: dts: msm: update display topology to 221 for vtdr6130 panel on Crow
ARM: dts: msm: reserve memory region for continuous splash
ARM: dts: msm: remove unsupported timings from cmd sim panels on crow
ARM: dts: msm: update display reset gpio for Crow target
ARM: dts: msm: update default panel to vtdr6130 command for Crow
ARM: dts: msm: update display reset gpio for Crow target
ARM: dts: msm: add display support for crow IDPS platform
ARM: dts: msm: remove DSI split link support
ARM: dts: msm: update max low/high bandwidth for crow target
ARM: dts: msm: update QoS table for crow target
ARM: dts: msm: add display support for crow IDPS platform
ARM: dts: msm: add 120hz 90hz vtdr panel support in crow target
ARM: dts: msm: enable vtdr6130 panel features on Crow
ARM: dts: msm: update max voltage of phy supply with pmic max value
ARM: dts: msm: add trustedvm display platform overlay for crow target
ARM: dts: msm: Add DP node for crow target
ARM: dts: msm: add trusted vm dt changes for crow
ARM: dts: msm: add support for Kalama RCM platform
ARM: dts: msm: enable compilation of display platforms for crow target
ARM: dts: msm: add link_parent clock in DP
ARM: dts: msm: enable touch support for crow target
ARM: dts: msm: add display dt node for crow target
ARM: dts: msm: add display platform overlay for crow target
ARM: dts: msm: enable DFPS for sharp QHD plus video mode panel on Kalama
ARM: dts: msm: add support for Kalama SoC variant
ARM: dts: msm: correct typo of qcom,bl-dsc-cmd-state property name
bindings: correct typo in qcom,bl-dsc-cmd-state property name
ARM: dts: msm: add support for hdk kalama target
ARM: dts: msm: add ipcc dpu client physical id on kalama
ARM: dts: msm: Add display device tree support for Kalama+sdxpinn
Change-Id: I6e042bdf7f864f71efc0da81e7d8a858e67a9fe2
Enable flag "qcom,leica-used-i2c" to skip BW vote for PM8008
used I2C instance to prevent deadlock condition between regulator
and clocks framework.
Change-Id: I4cc09d972d6097d8d6bdc74705407f838e08c793
For WLAN attaches the enumeration request should be done by WLAN.
And then PCIe Root complex will perform the enumeration process.
Change-Id: Ic7f897c374cf78d91113cfcced8cf8abd10ac07c
For PCIe 2 PHY setting of QSERDES_COM_SYSCLK_EN to 0x4 which is
internal diff cml clock, PHY is not coming up and hence changed the
PCIe 2 PHY setting of QSERDES_COM_SYSCLK_EN to 0x8 which is SE cmos clock.
Corrected SLV_Q2A_AXI_CLK clock for PCIe2.
Updated reset names of core and phy of PCIe0.
Change-Id: Ib227f03e2ddc4c581d538152e54fe036aef29895
Added the multiplier for L1.2 LTR threshold value and
L1.2 latency tolerance reporting value for sdxpinn.
Change-Id: I9310efcbb3b09875118bf3ce376335884aaf6e55
Some sdxpinn targets have fuse blown parts and so in those targets
one PCIe lane got disabled for PCIe0 and such devices are
enumerates with x1 lane width.
Hence, updated in PHY settings for PCIe0 to make sure that device
enumerate with x2 lane width for PCIe0 of all sdxpinn targets.
Change-Id: I2fdac831e670c2573541cb2e53a8c0f252f7f6e5
Move the aon-spi dt node out of soc and use qupv3_se4_spi label
to enable aon-spi dt node.
Set slatecom SPI speed as 40MHz.
Change-Id: I517f5f3a0806396b86a40baa8fb4fe0aff014957
