Evolution-x-devices/kernel_xiaomi_sm8450-devicetrees
2
0
Fork 0
mirror of https://github.com/Evolution-X-Devices/kernel_xiaomi_sm8450-devicetrees synced 2026-02-01 08:51:30 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
5fb5cda04f0f8d40bcf376caa33cbb08c451456f
kernel_xiaomi_sm8450-device…/qcom
History
Charan Teja Kalla 5fb5cda04f ARM: dts: msm: disable zone dma on parrot 
Since there are no clients that require 32bit physical memory, remove
zone dma on parrot.

Change-Id: I96b240a00b2b394eb83f8c3c8c783d137448a7a9
2022-07-01 14:41:14 +05:30
..
anorak-dma-heaps.dtsi
ARM: dts: msm: Remove the Secure CDSP heap for anorak
2022-05-19 21:02:48 +05:30
anorak-pcie.dtsi
ARM: dts: msm: Add PCIe configuration for anorak
2022-05-31 07:22:52 -07:00
anorak-pinctrl.dtsi
ARM: dts: msm: Add PCIe configuration for anorak
2022-05-31 07:22:52 -07:00
anorak-qupv3.dtsi
ARM: dts: msm: Add QUPv3 UART console node for anorak
2022-05-02 15:17:01 +05:30
anorak-reserved-memory.dtsi
ARM: dts: msm: Add initial memory map for anorak
2022-02-21 14:59:38 +05:30
anorak-rumi-overlay.dts
ARM: dts: msm: Fix overlay changes for Anorak
2022-03-24 11:59:38 +05:30
anorak-rumi.dts
ARM: dts: msm: Add initial device tree for Anorak
2022-01-17 11:49:35 +05:30
anorak-rumi.dtsi
ARM: dts: msm: Add PCIe configuration for anorak
2022-05-31 07:22:52 -07:00
anorak-stub-regulator.dtsi
ARM: dts: msm: Add support for powering video/camera
2022-02-21 14:34:06 +05:30
anorak-usb.dtsi
ARM: dts: msm: Add usb device nodes for anorak
2022-02-11 10:16:10 +05:30
anorak.dts
ARM: dts: msm: Add initial device tree for Anorak
2022-01-17 11:49:35 +05:30
anorak.dtsi
Merge "ARM: dts: msm: Enable remoteproc cdsp for Anorak"
2022-06-16 11:11:54 -07:00
cape-atp-pm8008-overlay.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-atp-pm8008.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-atp-pm8010-overlay.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-atp-pm8010.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-atp.dtsi
ARM: dts: msm: Update HS_TX_PRE_EMPHASIS register address on Cape
2022-04-26 10:16:34 +05:30
cape-cdp-pm8008-overlay.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-cdp-pm8008.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-cdp-pm8010-overlay.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-cdp-pm8010.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-cdp-qhd-pm8008-overlay.dts
ARM: dts: msm: Add QHD/120FPS platform support for Cape
2022-02-02 18:34:21 +05:30
cape-cdp-qhd-pm8008.dts
ARM: dts: msm: Add QHD/120FPS platform support for Cape
2022-02-02 18:34:21 +05:30
cape-cdp-qhd-pm8008.dtsi
ARM: dts: msm: Add Atmel touch support on cape target
2022-02-04 20:19:50 +05:30
cape-cdp-qhd-pm8010-overlay.dts
ARM: dts: msm: Add QHD/120FPS platform support for Cape
2022-02-02 18:34:21 +05:30
cape-cdp-qhd-pm8010.dts
ARM: dts: msm: Add QHD/120FPS platform support for Cape
2022-02-02 18:34:21 +05:30
cape-cdp-qhd-pm8010.dtsi
ARM: dts: msm: Add Atmel touch support on cape target
2022-02-04 20:19:50 +05:30
cape-cdp.dtsi
ARM: dts: msm: Update HS_TX_PRE_EMPHASIS register address on Cape
2022-04-26 10:16:34 +05:30
cape-coresight.dtsi
ARM: dts: msm: Add coresight and debug components for cape
2021-11-09 19:12:50 -08:00
cape-debug.dtsi
ARM: dts: msm: reduce the memory dump region size on cape
2022-06-01 14:41:50 +08:00
cape-dma-heaps.dtsi
ARM: dts: msm: SPSS changes for cape
2022-02-02 03:02:43 -08:00
cape-gpu.dtsi
ARM: dts: msm: Add CX dependency for cape gpu
2022-04-20 11:59:27 +05:30
cape-kiwi-cdp-pm8008-overlay.dts
ARM: dts: qcom: Add base device trees for Cape KIWI platform
2021-12-03 01:13:06 -08:00
cape-kiwi-cdp-pm8010-overlay.dts
ARM: dts: qcom: Add base device trees for Cape KIWI platform
2021-12-03 01:13:06 -08:00
cape-kiwi-mtp-pm8008-overlay.dts
ARM: dts: qcom: Add base device trees for Cape KIWI platform
2021-12-03 01:13:06 -08:00
cape-kiwi-mtp-pm8010-overlay.dts
ARM: dts: qcom: Add base device trees for Cape KIWI platform
2021-12-03 01:13:06 -08:00
cape-kiwi.dtsi
ARM: dts: msm: Add CNSS2 node for cape + Kiwi
2021-12-06 16:02:21 +05:30
cape-mtp-120fps-pm8008-overlay.dts
ARM: dts: msm: Add QHD/120FPS platform support for Cape
2022-02-02 18:34:21 +05:30
cape-mtp-120fps-pm8008.dts
ARM: dts: msm: Add QHD/120FPS platform support for Cape
2022-02-02 18:34:21 +05:30
cape-mtp-120fps-pm8008.dtsi
ARM: dts: msm: Add focaltech touch support on cape target
2022-02-15 10:58:12 -08:00
cape-mtp-120fps-pm8010-overlay.dts
ARM: dts: msm: Add QHD/120FPS platform support for Cape
2022-02-02 18:34:21 +05:30
cape-mtp-120fps-pm8010.dts
ARM: dts: msm: Add QHD/120FPS platform support for Cape
2022-02-02 18:34:21 +05:30
cape-mtp-120fps-pm8010.dtsi
ARM: dts: msm: Add focaltech touch support on cape target
2022-02-15 10:58:12 -08:00
cape-mtp-nodisplay-pm8008-overlay.dts
ARM: dts: msm: Add Nodisplay MTP platform support for Cape
2022-02-14 21:00:14 -08:00
cape-mtp-nodisplay-pm8008.dts
ARM: dts: msm: Add Nodisplay MTP platform support for Cape
2022-02-14 21:00:14 -08:00
cape-mtp-nodisplay-pm8008.dtsi
ARM: dts: msm: Add Nodisplay MTP platform support for Cape
2022-02-14 21:00:14 -08:00
cape-mtp-nodisplay-pm8010-overlay.dts
ARM: dts: msm: Add Nodisplay MTP platform support for Cape
2022-02-14 21:00:14 -08:00
cape-mtp-nodisplay-pm8010.dts
ARM: dts: msm: Add Nodisplay MTP platform support for Cape
2022-02-14 21:00:14 -08:00
cape-mtp-nodisplay-pm8010.dtsi
ARM: dts: msm: Add Nodisplay MTP platform support for Cape
2022-02-14 21:00:14 -08:00
cape-mtp-pm8008-overlay.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-mtp-pm8008.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-mtp-pm8010-overlay.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-mtp-pm8010.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-mtp.dtsi
ARM: dts: msm: Cleanup use of irq for eUSB2 repeater on Cape
2022-04-14 14:12:57 +05:30
cape-pcie.dtsi
ARM: dts: msm: Update PHY setting as per PHY HSR v0.99 for cape
2022-05-30 21:41:59 -07:00
cape-pinctrl.dtsi
ARM: dts: msm: Enable i2s interfaces for FM
2022-01-27 06:41:20 -08:00
cape-pmic-overlay.dtsi
ARM: dts: msm: Remove xo-therm critical trip for CAPE
2022-04-20 13:05:29 +05:30
cape-qrd-pm8008-overlay.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-qrd-pm8008.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-qrd-pm8010-overlay.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-qrd-pm8010.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-qrd.dtsi
ARM: dts: msm: Cleanup use of irq for eUSB2 repeater on Cape
2022-04-14 14:12:57 +05:30
cape-regulators.dtsi
ARM: dts: msm: Remove init mode configuration for LDO7E
2022-02-28 14:51:20 +05:30
cape-reserved-memory.dtsi
Merge "ARM: dts: msm: Add Node for Gh VM Loader & CPUSys VM on Cape"
2022-02-03 19:34:54 -08:00
cape-thermal.dtsi
ARM: dts: qcom: Remove modem and cdsp qmi cooling device for cape
2022-03-09 18:47:29 +05:30
cape-usb.dtsi
ARM: dts: msm: Add usb_nop_phy on Cape
2022-05-23 10:30:36 +05:30
cape-v2-atp-pm8008.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-v2-atp-pm8010.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-v2-cdp-pm8008.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-v2-cdp-pm8010.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-v2-mtp-pm8008.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-v2-mtp-pm8010.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-v2-qrd-pm8008.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-v2-qrd-pm8010.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
cape-v2.dts
ARM: dts: msm: Enable MTP,CDP,ATP devices for CAPE V2
2021-10-06 00:22:12 -07:00
cape-v2.dtsi
ARM: dts: msm: Add msm-id for cape LTE
2022-02-05 02:28:49 -08:00
cape-vm-cdp-qhd.dts
ARM: dts: msm: Add SVM support to Capep/Cape-v2(LTE) platforms
2022-06-10 13:17:23 +05:30
cape-vm-cdp.dts
ARM: dts: msm: Enable SVM on Cape
2022-02-06 09:59:18 -08:00
cape-vm-cdp.dtsi
ARM: dts: msm: Enable SVM on Cape
2022-02-06 09:59:18 -08:00
cape-vm-mtp.dts
ARM: dts: msm: Enable SVM on Cape
2022-02-06 09:59:18 -08:00
cape-vm-mtp.dtsi
ARM: dts: msm: Enable SVM on Cape
2022-02-06 09:59:18 -08:00
cape-vm-qrd.dts
ARM: dts: msm: Enable SVM on Cape
2022-02-06 09:59:18 -08:00
cape-vm-qrd.dtsi
ARM: dts: msm: Enable SVM on Cape
2022-02-06 09:59:18 -08:00
cape-vm.dtsi
ARM: dts: msm: Add SVM support to Capep/Cape-v2(LTE) platforms
2022-06-10 13:17:23 +05:30
cape.dts
ARM: dts: msm: Add initial device tree for Cape
2021-09-02 05:45:27 -07:00
cape.dtsi
Merge "ARM: dts: msm: Set qcom,dll_lock_bist_fail_wa property for cape and neo"
2022-05-24 22:45:42 -07:00
capep-atp-pm8008.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
capep-atp-pm8010.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
capep-cdp-pm8008.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
capep-cdp-pm8010.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
capep-mtp-pm8008.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
capep-mtp-pm8010.dts
ARM: dts: msm: Add support for PM8008 and PM8010 for cape boards
2021-11-09 17:41:04 +05:30
capep.dts
ARM: dts: msm: Enable MTP,CDP,ATP devices for APQ Cape
2021-10-29 00:40:41 -07:00
capep.dtsi
ARM: dts: msm: Disable the IPA hw in APQ targets
2021-11-10 17:30:41 +05:30
diwali-atp-overlay.dts
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-atp.dts
ARM: dts: msm: Add nopmi support for diwali
2021-11-03 16:16:41 +05:30
diwali-atp.dtsi
ARM: dts: qcom: Update skin and nsp Tj based config for diwali
2022-02-24 13:24:18 +05:30
diwali-coresight.dtsi
ARM: dts: msm: add spmi tgu component
2022-04-18 13:49:42 +08:00
diwali-debug.dtsi
ARM: dts: msm: remove scandump entry
2022-04-19 20:03:25 +08:00
diwali-dma-heaps.dtsi
ARM: dts: msm: add display and demura heap for diwali
2021-12-07 14:23:03 +05:30
diwali-gdsc.dtsi
ARM: dts: msm: Update collapse-vote property for PCIE GDSC's
2022-05-26 16:16:12 +05:30
diwali-gpu.dtsi
ARM: dts: msm: Update ddr8 bus voting for diwali gpu
2022-06-14 11:36:25 +05:30
diwali-hsp.dts
Revert "ARM: dts: msm: Remove subtype from diwali-hsp.dts"
2021-12-15 00:21:23 -08:00
diwali-hsp.dtsi
ARM: dts: msm: Move cnss nodes to diwali-idp-hsp.dtsi
2021-12-19 13:14:43 +05:30
diwali-idp-amoled-overlay.dts
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-idp-amoled.dts
ARM: dts: msm: Add nopmi support for diwali
2021-11-03 16:16:41 +05:30
diwali-idp-amoled.dtsi
ARM: dts: msm: Enable touch for amoled idps on diwali
2021-11-09 13:13:53 +05:30
diwali-idp-hsp-overlay.dts
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-idp-hsp.dts
ARM: dts: msm: Add nopmi support for diwali
2021-11-03 16:16:41 +05:30
diwali-idp-hsp.dtsi
ARM: dts: msm: Remove wlan-ant-switch-supply on diwali HSP attach
2022-04-14 15:30:52 +05:30
diwali-idp-nopmi-overlay.dts
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-idp-nopmi.dts
ARM: dts: msm: Add nopmi support for diwali
2021-11-03 16:16:41 +05:30
diwali-idp-overlay.dts
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-idp-pm7250b.dtsi
ARM: dts: msm: Add extcon EUD on Diwali
2021-12-09 14:55:23 +05:30
diwali-idp-usbc-overlay.dts
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-idp-usbc.dts
ARM: dts: msm: Add nopmi support for diwali
2021-11-03 16:16:41 +05:30
diwali-idp-usbc.dtsi
ARM: dts: msm: Add nopmi support for diwali
2021-11-03 16:16:41 +05:30
diwali-idp.dts
ARM: dts: msm: Add nopmi support for diwali
2021-11-03 16:16:41 +05:30
diwali-idp.dtsi
ARM: dts: qcom: Update skin and nsp Tj based config for diwali
2022-02-24 13:24:18 +05:30
diwali-lte-atp.dts
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-lte-atp.dtsi
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-lte-idp-amoled.dts
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-lte-idp-amoled.dtsi
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-lte-idp-hsp.dts
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-lte-idp-hsp.dtsi
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-lte-idp-nopmi.dts
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-lte-idp-usbc.dts
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-lte-idp-usbc.dtsi
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-lte-idp.dts
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-lte-idp.dtsi
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-lte-qrd-nopmi.dts
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-lte-qrd.dts
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-lte-qrd.dtsi
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-lte.dts
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-lte.dtsi
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-pcie.dtsi
ARM: dts: msm: Vote CX level to SVS for PCIe GEN-3 speed
2022-05-18 17:50:33 +05:30
diwali-pinctrl.dtsi
ARM: dts: msm: Update usb_phy to usb0_phy for Diwali
2021-12-27 18:38:02 +05:30
diwali-pm7250b.dtsi
ARM: dts: msm: change bcl ibat thresholds for diwali
2022-03-29 16:43:58 +05:30
diwali-pmic-overlay.dtsi
ARM: dts: msm: expose nvmem cell for adc scaling on diwali
2022-01-17 14:42:05 +05:30
diwali-qrd-nopmi-overlay.dts
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-qrd-nopmi.dts
ARM: dts: msm: Add nopmi support for diwali
2021-11-03 16:16:41 +05:30
diwali-qrd-overlay.dts
ARM: dts: msm: Add device-tree support for Diwali LTE
2022-02-17 14:05:50 +05:30
diwali-qrd-pm7250b.dtsi
ARM: dts: msm: update redriver setting on diwali QRD
2022-02-28 15:46:13 +08:00
diwali-qrd.dts
ARM: dts: msm: Add nopmi support for diwali
2021-11-03 16:16:41 +05:30
diwali-qrd.dtsi
ARM: dts: qcom: Update skin and nsp Tj based config for diwali
2022-02-24 13:24:18 +05:30
diwali-qupv3.dtsi
ARM: dts: msm: Configure RX sleep state with GPIO mode for wakeup
2021-11-30 14:59:38 +05:30
diwali-regulators.dtsi
ARM: dts: msm: Update probe sequence for diwali regulators
2021-12-01 12:04:44 +05:30
diwali-reserved-memory.dtsi
ARM: dts: msm: Align diwali memory map to v4
2022-04-05 11:56:00 +05:30
diwali-rumi-overlay.dts
ARM: dts: msm: Add initial device tree for Diwali
2021-03-08 11:22:07 +05:30
diwali-rumi.dts
ARM: dts: msm: Add initial device tree for Diwali
2021-03-08 11:22:07 +05:30
diwali-rumi.dtsi
ARM: dts: msm: Add dispcc clock and enable disp_rsc device for diwali
2021-11-09 12:55:39 +05:30
diwali-stub-regulator.dtsi
ARM: dts: msm: Add stub regulators for Diwali
2021-02-11 16:12:35 +05:30
diwali-thermal-overlay.dtsi
Merge "ARM: dts: msm: map cdev in amberjeck die temp and enable thermal overlay"
2021-11-08 00:23:46 -08:00
diwali-thermal.dtsi
ARM: dts: msm: Add Tj fail safe mitigation rule for diwali
2022-04-05 23:43:55 +05:30
diwali-usb.dtsi
ARM: dts: msm: Add ref_clk to PHY node for diwali/cape/waipio/parrot
2022-04-27 15:37:01 +05:30
diwali-vm-atp.dts
ARM: dts: msm: Add IDP/ATP/QRD device tree support for Diwali SVM
2021-11-01 13:32:28 +05:30
diwali-vm-atp.dtsi
ARM: dts: msm: Add IDP/ATP/QRD device tree support for Diwali SVM
2021-11-01 13:32:28 +05:30
diwali-vm-idp.dts
ARM: dts: msm: Add support svm to diwali hsp/usbc/amoled/p/lte platforms
2022-02-18 04:50:33 -08:00
diwali-vm-idp.dtsi
ARM: dts: msm: Enable SVM trusted touch on diwali idp
2021-12-03 13:31:31 +05:30
diwali-vm-qrd.dts
ARM: dts: msm: Add IDP/ATP/QRD device tree support for Diwali SVM
2021-11-01 13:32:28 +05:30
diwali-vm-qrd.dtsi
ARM: dts: msm: Enable trusted touch for Diwali QRD
2022-01-14 15:55:04 +08:00
diwali-vm-rumi.dts
ARM: dts: msm: add initial dt files to support Diwali VM
2021-09-15 16:17:05 +05:30
diwali-vm-rumi.dtsi
ARM: dts: msm: add initial dt files to support Diwali VM
2021-09-15 16:17:05 +05:30
diwali-vm.dtsi
ARM: dts: msm: Add support svm to diwali hsp/usbc/amoled/p/lte platforms
2022-02-18 04:50:33 -08:00
diwali.dts
ARM: dts: msm: Add initial device tree for Diwali
2021-03-08 11:22:07 +05:30
diwali.dtsi
Merge "ARM: dts: msm: Update DDRQOS memlat table for Diwali"
2022-06-15 03:14:47 -07:00
diwalip-atp.dts
ARM: dts: qcom: Add APQ variant device trees for diwali
2022-01-05 00:39:40 -08:00
diwalip-atp.dtsi
ARM: dts: qcom: Add APQ variant device trees for diwali
2022-01-05 00:39:40 -08:00
diwalip-idp-amoled.dts
ARM: dts: qcom: Add APQ variant device trees for diwali
2022-01-05 00:39:40 -08:00
diwalip-idp-amoled.dtsi
ARM: dts: qcom: Add APQ variant device trees for diwali
2022-01-05 00:39:40 -08:00
diwalip-idp-hsp.dts
ARM: dts: qcom: Add APQ variant device trees for diwali
2022-01-05 00:39:40 -08:00
diwalip-idp-hsp.dtsi
ARM: dts: qcom: Add APQ variant device trees for diwali
2022-01-05 00:39:40 -08:00
diwalip-idp-nopmi.dts
ARM: dts: qcom: Add APQ variant device trees for diwali
2022-01-05 00:39:40 -08:00
diwalip-idp-usbc.dts
ARM: dts: qcom: Add APQ variant device trees for diwali
2022-01-05 00:39:40 -08:00
diwalip-idp-usbc.dtsi
ARM: dts: qcom: Add APQ variant device trees for diwali
2022-01-05 00:39:40 -08:00
diwalip-idp.dts
ARM: dts: qcom: Add APQ variant device trees for diwali
2022-01-05 00:39:40 -08:00
diwalip-idp.dtsi
ARM: dts: qcom: Add APQ variant device trees for diwali
2022-01-05 00:39:40 -08:00
diwalip-qrd-nopmi.dts
ARM: dts: qcom: Add APQ variant device trees for diwali
2022-01-05 00:39:40 -08:00
diwalip-qrd.dts
ARM: dts: qcom: Add APQ variant device trees for diwali
2022-01-05 00:39:40 -08:00
diwalip-qrd.dtsi
ARM: dts: qcom: Add APQ variant device trees for diwali
2022-01-05 00:39:40 -08:00
diwalip.dts
ARM: dts: qcom: Add APQ variant device trees for diwali
2022-01-05 00:39:40 -08:00
diwalip.dtsi
ARM: dts: qcom: Add APQ variant device trees for diwali
2022-01-05 00:39:40 -08:00
helios.dtsi
ARM: dts: qcom: adding dummy interrupt name for helios
2022-05-23 13:58:56 +05:30
holi-atp-overlay.dts
ARM: dts: msm: correction to adsp variant read entry
2020-09-02 16:12:59 +05:30
holi-atp.dts
ARM: dts: msm: Add initial platform device tree for holi
2020-07-20 10:55:51 +05:30
holi-atp.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
holi-audio-overlay.dtsi
ARM: dts: msm: add support for 1 MB SKU for holi
2020-09-07 03:41:37 -07:00
holi-audio.dtsi
ARM: dts: msm: dtsi changes for holi
2020-08-20 21:53:31 +05:30
holi-cdp-lcd-overlay.dts
ARM: dts: msm: Add support for CDP LCD platform for holi
2020-09-07 13:02:53 +05:30
holi-cdp-lcd.dts
ARM: dts: msm: Add support for CDP LCD platform for holi
2020-09-07 13:02:53 +05:30
holi-cdp-lcd.dtsi
ARM: dts: msm: Enable WLED for holi LCD platform
2020-09-10 21:32:10 +05:30
holi-cdp-overlay.dts
ARM: dts: msm: dtsi changes for holi
2020-08-20 21:53:31 +05:30
holi-cdp.dts
ARM: dts: msm: Add initial platform device tree for holi
2020-07-20 10:55:51 +05:30
holi-cdp.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
holi-coresight.dtsi
ARM: dts: msm: Correct name of tpdm ACTPM on holi
2020-09-11 10:59:26 +08:00
holi-gdsc.dtsi
ARM: dts: msm: Update DISPCC debug CC and GDSC for HOLI
2020-07-21 10:53:19 +05:30
holi-gpu.dtsi
Merge "ARM: dts: msm: Update GPU clock names for holi"
2020-09-14 20:12:24 -07:00
holi-ion.dtsi
ARM: dts: msm: Update the system heap type on all targets
2020-10-07 13:34:39 -07:00
holi-lpi.dtsi
ARM: dts: msm: Add audio specific dt files for holi
2020-07-24 08:53:23 +05:30
holi-mtp-overlay.dts
ARM: dts: msm: Add msm id for Holi variant
2020-07-30 16:03:17 +05:30
holi-mtp-usbc-overlay.dts
ARM: dts: msm: Add msm id for Holi variant
2020-07-30 16:03:17 +05:30
holi-mtp-usbc.dts
ARM: dts: msm: Add initial platform device tree for holi
2020-07-20 10:55:51 +05:30
holi-mtp-usbc.dtsi
ARM: dts: msm: Enable smb1398 on holi MTP and QRD
2020-09-11 18:43:06 -07:00
holi-mtp.dts
ARM: dts: msm: Add initial platform device tree for holi
2020-07-20 10:55:51 +05:30
holi-mtp.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
holi-pinctrl.dtsi
ARM: dts: msm: add touch support for holi target
2020-08-02 21:34:35 +05:30
holi-pm.dtsi
ARM: dts: msm: Add domain names for the core lpm nodes for holi
2020-09-01 22:12:37 +05:30
holi-pmic-overlay.dtsi
ARM: dts: msm: Add WLED support on PM6150l for holi
2020-09-02 11:46:55 +05:30
holi-qrd-overlay.dts
ARM: dts: msm: Add msm id for Holi variant
2020-07-30 16:03:17 +05:30
holi-qrd.dts
ARM: dts: msm: Add initial platform device tree for holi
2020-07-20 10:55:51 +05:30
holi-qrd.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
holi-qupv3.dtsi
ARM: dts: msm: Enable shared dt flag for I2C Se10 on holi
2020-08-27 11:02:49 +05:30
holi-regulators.dtsi
Merge "ARM: dts: msm: Modify the "init-voltage" of PON rails for holi"
2020-08-26 04:59:22 -07:00
holi-rumi-overlay.dts
…
holi-rumi.dts
…
holi-rumi.dtsi
ARM: dts: msm: Disable eMMC for holi
2020-08-06 21:16:47 +05:30
holi-stub-regulator.dtsi
…
holi-thermal-modem.dtsi
ARM: dts: qcom: Add QMI sensors and cooling devices for HOLI
2020-07-21 14:31:58 +05:30
holi-thermal-overlay.dtsi
ARM: dts: qcom: Update pm7250b alram sensor thermal config for HOLI
2020-09-01 02:16:51 -07:00
holi-thermal.dtsi
ARM: dts: qcom: Update PMIC support for holi
2020-08-02 10:24:18 +05:30
holi-usb.dtsi
ARM: dts: msm: Remove qcom,dwc-usb3-msm-tx-fifo-size property
2022-01-21 06:29:43 +05:30
holi-vidc.dtsi
ARM: dts: msm: update low SVS clock corner for holi
2020-09-02 16:43:33 +05:30
holi.dts
…
holi.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
ipcc-test-diwali.dtsi
ARM: dts: qcom: Include IPCC test node for Diwali
2021-07-29 05:33:37 -07:00
ipcc-test-holi.dtsi
ARM: dts: msm: Add ipcc test nodes for Holi
2020-08-03 10:52:44 +05:30
ipcc-test-parrot.dtsi
ARM: dts: qcom: Include IPCC test node for Parrot
2021-12-13 11:15:52 +05:30
ipcc-test-shima.dtsi
…
ipcc-test.dtsi
…
lahaina-atp-overlay.dts
ARM: dts: msm: Add support for Lahaina ATP platform
2020-05-22 15:35:09 -07:00
lahaina-atp.dts
ARM: dts: msm: Add support for Lahaina ATP platform
2020-05-22 15:35:09 -07:00
lahaina-atp.dtsi
ARM: dts: msm: Add support for Lahaina ATP platform
2020-05-22 15:35:09 -07:00
lahaina-audio-overlay.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
lahaina-audio.dtsi
Merge "ARM: dts: msm: add CMA heap allocation"
2020-07-15 04:17:45 -07:00
lahaina-cdp-overlay.dts
…
lahaina-cdp-v2.2-overlay.dts
ARM: dts: qcom: Add device tree files for lahaina CDP v2.2
2020-05-29 06:11:12 -07:00
lahaina-cdp-v2.2.dts
ARM: dts: qcom: Add device tree files for lahaina CDP v2.2
2020-05-29 06:11:12 -07:00
lahaina-cdp-v2.2.dtsi
ARM: dts: msm: add x-flip and y-flip properties for ST touch driver node
2020-06-02 12:48:04 -07:00
lahaina-cdp.dts
…
lahaina-cdp.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
lahaina-coresight.dtsi
ARM: dts: msm: Modify reset cti to cti6 for lahaina
2020-08-21 18:39:35 +08:00
lahaina-cvp.dtsi
ARM: dts: msm: Add cvp device for shima
2020-08-06 15:52:42 +05:30
lahaina-gpu.dtsi
ARM: dts: msm: Add tzone-names for lahaina GPU
2020-09-10 19:08:44 +09:00
lahaina-hdk-overlay.dts
ARM: dts: msm: Add initial device tree for Lahaina HDK
2020-07-21 17:22:48 +08:00
lahaina-hdk.dts
ARM: dts: msm: Add initial device tree for Lahaina HDK
2020-07-21 17:22:48 +08:00
lahaina-hdk.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
lahaina-ion.dtsi
ARM: dts: qcom: Add the CDSP carveout heap for waipio
2020-12-06 13:33:32 -08:00
lahaina-lpi.dtsi
…
lahaina-mtp-hsp-overlay.dts
…
lahaina-mtp-hsp.dts
…
lahaina-mtp-hsp.dtsi
…
lahaina-mtp-overlay.dts
…
lahaina-mtp-v2-overlay.dts
ARM: dts: qcom: Add devicetree files for board v2
2020-09-13 12:32:24 -07:00
lahaina-mtp-v2.1-overlay.dts
ARM: dts: qcom: Add device tree files for lahaina MTP v2.1
2020-07-20 16:48:18 -07:00
lahaina-mtp-v2.1.dts
ARM: dts: qcom: Add device tree files for lahaina MTP v2.1
2020-07-20 16:48:18 -07:00
lahaina-mtp-v2.1.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
lahaina-mtp-v2.dts
ARM: dts: qcom: Add devicetree files for board v2
2020-09-13 12:32:24 -07:00
lahaina-mtp-v2.dtsi
ARM: dts: qcom: Add devicetree files for board v2
2020-09-13 12:32:24 -07:00
lahaina-mtp.dts
…
lahaina-mtp.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
lahaina-pcie.dtsi
ARM: dts: msm: Update PCIe1 PHY settings to v1.06 for lahaina
2020-09-09 09:43:00 -07:00
lahaina-pinctrl.dtsi
ARM: dts: msm: Configure GPIO 60 and 61 to pull-up in sleep state
2020-07-17 11:09:08 +05:30
lahaina-pmic-overlay.dtsi
ARM: dts: msm: add PBS device for PM8350B haptics ISC config
2020-09-01 14:48:39 +08:00
lahaina-qrd-common.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
lahaina-qrd-hsp-overlay.dts
…
lahaina-qrd-hsp.dts
…
lahaina-qrd-hsp.dtsi
…
lahaina-qrd-module-overlay.dts
…
lahaina-qrd-module.dts
…
lahaina-qrd-module.dtsi
ARM: dts: qcom: fix orientation not work on Diwali QRD
2022-01-12 15:45:43 +08:00
lahaina-qrd-overlay.dts
…
lahaina-qrd.dts
…
lahaina-qrd.dtsi
ARM: dts: qcom: fix orientation not work on Diwali QRD
2022-01-12 15:45:43 +08:00
lahaina-qupv3.dtsi
ARM: dts: msm: Update SPI SE4 to select a static GPII number
2020-08-05 15:03:35 +05:30
lahaina-regulators.dtsi
Merge "ARM: dts: msm: reduce S2E regulator minimum voltage for Lahaina"
2020-09-09 18:24:26 -07:00
lahaina-rumi-overlay.dts
…
lahaina-rumi.dts
…
lahaina-rumi.dtsi
Merge tag 'kernel.lnx.5.4-200510' into msm-waipio
2020-07-10 10:00:48 -07:00
lahaina-smp2p.dtsi
ARM: dts: msm: add remote debugger support on Lahaina
2020-06-01 16:58:15 +05:30
lahaina-thermal-modem.dtsi
ARM: dts: msm: Update modem Tj configuration for Lahaina
2020-07-02 13:04:58 -07:00
lahaina-thermal-overlay.dtsi
dt-bindings: thermal: use the cpu_pause driver
2021-01-11 17:52:58 -08:00
lahaina-thermal.dtsi
ARM: dts: msm: Update CPU phandles for Lahaina instead of mask
2021-02-16 13:34:02 -08:00
lahaina-usb.dtsi
ARM: dts: msm: Remove qcom,dwc-usb3-msm-tx-fifo-size property
2022-01-21 06:29:43 +05:30
lahaina-v2-atp.dts
ARM: dts: msm: Add support for Lahaina ATP platform
2020-05-22 15:35:09 -07:00
lahaina-v2-cdp.dts
ARM: dts: qcom: Add device tree files for lahaina & lahainap v2
2020-05-14 13:08:02 -07:00
lahaina-v2-gpu.dtsi
ARM: dts: qcom: Update ACD control register values for A660v2
2020-09-11 14:35:53 -07:00
lahaina-v2-hdk.dts
ARM: dts: msm: Add initial device tree for Lahaina HDK
2020-07-21 17:22:48 +08:00
lahaina-v2-mtp.dts
ARM: dts: qcom: Add device tree files for lahaina & lahainap v2
2020-05-14 13:08:02 -07:00
lahaina-v2-qrd-module.dts
ARM: dts: qcom: Add device tree files for lahaina module v2
2020-07-20 17:37:20 +08:00
lahaina-v2-qrd.dts
ARM: dts: qcom: Add device tree files for lahaina & lahainap v2
2020-05-14 13:08:02 -07:00
lahaina-v2.1-atp.dts
ARM: dts: msm: Add device-tree files for Lahaina v2.1
2020-07-14 14:38:31 -07:00
lahaina-v2.1-cdp.dts
ARM: dts: msm: Add device-tree files for Lahaina v2.1
2020-07-14 14:38:31 -07:00
lahaina-v2.1-hdk.dts
ARM: dts: msm: Add initial device tree for Lahaina HDK
2020-07-21 17:22:48 +08:00
lahaina-v2.1-mtp.dts
ARM: dts: msm: Add device-tree files for Lahaina v2.1
2020-07-14 14:38:31 -07:00
lahaina-v2.1-qrd-module.dts
ARM: dts: qcom: Add device tree files for lahaina module v2
2020-07-20 17:37:20 +08:00
lahaina-v2.1-qrd.dts
ARM: dts: msm: Add device-tree files for Lahaina v2.1
2020-07-14 14:38:31 -07:00
lahaina-v2.1.dts
ARM: dts: msm: Add device-tree files for Lahaina v2.1
2020-07-14 14:38:31 -07:00
lahaina-v2.1.dtsi
ARM: dts: msm: Update PCIe0 PHY settings to v1.01 for lahaina v2.1
2020-09-09 09:20:58 -07:00
lahaina-v2.dts
ARM: dts: qcom: Add device tree files for lahaina & lahainap v2
2020-05-14 13:08:02 -07:00
lahaina-v2.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
lahaina-vidc.dtsi
ARM: dts: msm: Remove core clock reset from vidc dts
2020-07-24 17:06:42 -07:00
lahaina-vm-cdp.dts
ARM: dts: msm: Add VM board files for Lahaina
2020-08-27 13:38:21 +05:30
lahaina-vm-cdp.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
lahaina-vm-ion.dtsi
ARM: dts: msm: Add VM board files for Lahaina
2020-08-27 13:38:21 +05:30
lahaina-vm-mtp.dts
ARM: dts: msm: Add VM board files for Lahaina
2020-08-27 13:38:21 +05:30
lahaina-vm-mtp.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
lahaina-vm-qrd.dts
ARM: dts: msm: Add VM board files for Lahaina
2020-08-27 13:38:21 +05:30
lahaina-vm-qrd.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
lahaina-vm.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
lahaina.dts
…
lahaina.dtsi
ARM: dts: qcom: Enable performance cpufreq governor during boot
2021-02-11 16:56:02 +05:30
lahainap-atp-overlay.dts
ARM: dts: msm: Add support for Lahaina ATP platform
2020-05-22 15:35:09 -07:00
lahainap-atp.dts
ARM: dts: msm: Add support for Lahaina ATP platform
2020-05-22 15:35:09 -07:00
lahainap-atp.dtsi
ARM: dts: msm: Add support for Lahaina ATP platform
2020-05-22 15:35:09 -07:00
lahainap-cdp-overlay.dts
…
lahainap-cdp.dts
…
lahainap-cdp.dtsi
…
lahainap-mtp-overlay.dts
…
lahainap-mtp.dts
…
lahainap-mtp.dtsi
…
lahainap-qrd-overlay.dts
…
lahainap-qrd.dts
…
lahainap-qrd.dtsi
…
lahainap-v2-atp.dts
ARM: dts: msm: Add support for Lahaina ATP platform
2020-05-22 15:35:09 -07:00
lahainap-v2-cdp.dts
ARM: dts: qcom: Add device tree files for lahaina & lahainap v2
2020-05-14 13:08:02 -07:00
lahainap-v2-mtp.dts
ARM: dts: qcom: Add device tree files for lahaina & lahainap v2
2020-05-14 13:08:02 -07:00
lahainap-v2-qrd.dts
ARM: dts: qcom: Add device tree files for lahaina & lahainap v2
2020-05-14 13:08:02 -07:00
lahainap-v2.1-atp.dts
ARM: dts: msm: Add device-tree files for Lahaina v2.1
2020-07-14 14:38:31 -07:00
lahainap-v2.1-cdp.dts
ARM: dts: msm: Add device-tree files for Lahaina v2.1
2020-07-14 14:38:31 -07:00
lahainap-v2.1-mtp.dts
ARM: dts: msm: Add device-tree files for Lahaina v2.1
2020-07-14 14:38:31 -07:00
lahainap-v2.1-qrd.dts
ARM: dts: msm: Add device-tree files for Lahaina v2.1
2020-07-14 14:38:31 -07:00
lahainap-v2.1.dts
ARM: dts: msm: Add device-tree files for Lahaina v2.1
2020-07-14 14:38:31 -07:00
lahainap-v2.1.dtsi
ARM: dts: msm: Add device-tree files for Lahaina v2.1
2020-07-14 14:38:31 -07:00
lahainap-v2.dts
ARM: dts: qcom: Add device tree files for lahaina & lahainap v2
2020-05-14 13:08:02 -07:00
lahainap-v2.dtsi
ARM: dts: msm: Do not disable modem PIL for Lahaina APQ
2020-08-10 11:13:32 -07:00
lahainap.dts
…
lahainap.dtsi
ARM: dts: msm: Do not disable modem PIL for Lahaina APQ
2020-08-10 11:13:32 -07:00
Makefile
Merge "ARM: dts: msm: Add SVM support to Capep/Cape-v2(LTE) platforms"
2022-06-16 00:57:54 -07:00
msm-arm-smmu-diwali.dtsi
ARM: dts: msm: provide handoff-smr by value
2022-02-02 00:12:52 +05:30
msm-arm-smmu-holi.dtsi
ARM: dts: msm: update apps smmu actlr settings
2020-08-24 15:09:48 +05:30
msm-arm-smmu-lahaina.dtsi
ARM: dts: msm: Add stub device for qcom dma layer
2021-01-15 16:08:15 -08:00
msm-arm-smmu-neo.dtsi
ARM: dts: msm: Update regulator nodes and gdsc info for neo SMMU
2022-04-21 09:32:11 +05:30
msm-arm-smmu-parrot.dtsi
ARM: dts: msm: correct actlr settings for parrot
2022-05-26 12:02:10 +05:30
msm-arm-smmu-ravelin.dtsi
ARM: dts: msm: modify the range of SIDs of TBU_GPU_1
2022-06-08 09:48:26 +08:00
msm-arm-smmu-sdxlemur.dtsi
ARM: dts: msm: Swap interconnect masters
2020-08-06 10:38:47 -07:00
msm-arm-smmu-shima.dtsi
Merge "ARM: dts: msm: Add addtional KGSL SMMU clocks for Shima"
2020-08-27 00:31:40 -07:00
msm-arm-smmu-waipio-vm.dtsi
Revert "ARM: dts: msm: Remove vsmmu devicetree node for waipio-vm"
2021-06-29 14:31:04 -07:00
msm-arm-smmu-waipio.dtsi
ARM: dts: msm: provide handoff-smr by value
2022-02-02 00:12:52 +05:30
msm-audio-lpass.dtsi
Merge "ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10"
2020-12-17 07:27:44 -08:00
msm-qvr-external.dtsi
ARM: dts: msm: Adding external VR viewer support
2020-05-04 17:06:42 -07:00
msm-rdbg.dtsi
ARM: dts: msm: add remote debugger support on Lahaina
2020-06-01 16:58:15 +05:30
neo_la-reserved-memory.dtsi
Revert "Revert "ARM: dts: msm: Add neo LA memory map""
2022-05-05 11:02:29 -07:00
neo_la-rumi-overlay.dts
ARM: dts: msm: Add initial base changes for neo la
2022-02-18 10:51:03 +05:30
neo_la-rumi.dts
ARM: dts: msm: Add initial base changes for neo la
2022-02-18 10:51:03 +05:30
neo_la-rumi.dtsi
ARM: dts: msm: Add initial base changes for neo la
2022-02-18 10:51:03 +05:30
neo_la.dts
ARM: dts: msm: Add initial base changes for neo la
2022-02-18 10:51:03 +05:30
neo_la.dtsi
Merge "Revert "Revert "ARM: dts: msm: Add neo LA memory map"""
2022-06-03 09:45:44 -07:00
neo_luna-v2-sg-idp-overlay.dts
ARM: dts: msm: Add initial base changes for neo luna-v2
2022-05-19 21:39:04 +05:30
neo_luna-v2-sg-idp.dts
ARM: dts: msm: Add initial base changes for neo luna-v2
2022-05-19 21:39:04 +05:30
neo_luna-v2-sg-idp.dtsi
ARM: dts: msm: Add initial base changes for neo luna-v2
2022-05-19 21:39:04 +05:30
neo_luna-v2.dts
ARM: dts: msm: Add initial base changes for neo luna-v2
2022-05-19 21:39:04 +05:30
neo_luna-v2.dtsi
ARM: dts: msm: define SMPS2A regulator back for GFX on Luna v2
2022-06-12 21:52:49 -07:00
neo-atp-overlay.dts
ARM: dts: msm: Add initial device tree for Neo IDP/ATP platform
2022-03-16 16:37:07 +05:30
neo-atp.dts
ARM: dts: msm: Add initial device tree for Neo IDP/ATP platform
2022-03-16 16:37:07 +05:30
neo-atp.dtsi
ARM: dts: msm: Add eMMC card support for neo platforms
2022-03-31 16:16:23 +05:30
neo-coresight.dtsi
Merge "ARM: dts: msm: add "qcom,hw-enable-check" property for tpdm dcc"
2022-05-06 07:35:41 -07:00
neo-debug.dtsi
ARM: dts: msm: Update DCC registers for Neo
2022-06-07 03:39:50 -07:00
neo-dma-heaps.dtsi
ARM: dts: msm: disable lsr heap for aurora LA
2022-05-23 18:23:52 +05:30
neo-gpu.dtsi
ARM: dts: msm: Specify ddr bandwidth for neo GMU scaling
2022-05-15 20:00:23 -07:00
neo-idp-display-overlay.dts
ARM: dts: msm: Add initial device tree for Neo IDP DISPLAY platform
2022-03-22 09:36:11 +05:30
neo-idp-display.dts
ARM: dts: msm: Add initial device tree for Neo IDP DISPLAY platform
2022-03-22 09:36:11 +05:30
neo-idp-display.dtsi
ARM: dts: msm: Add initial device tree for Neo IDP DISPLAY platform
2022-03-22 09:36:11 +05:30
neo-idp-overlay.dts
ARM: dts: msm: Add initial device tree for Neo IDP DISPLAY platform
2022-03-22 09:36:11 +05:30
neo-idp.dts
ARM: dts: msm: Add initial device tree for Neo IDP DISPLAY platform
2022-03-22 09:36:11 +05:30
neo-idp.dtsi
ARM: dts: qcom: BT: Add Wailua pinctrl configurations for BT
2022-04-25 06:16:13 -07:00
neo-pcie.dtsi
ARM: dts: msm: Update PHY setting as per PHY HSR v0.99
2022-05-01 14:50:06 +05:30
neo-pinctrl.dtsi
Merge "ARM: dts: msm: add pull-up for spi cs pin"
2022-05-10 23:47:15 -07:00
neo-pm8008.dtsi
ARM: dts: msm: Add Leica2 and Leica PMIC for NEO SG
2022-05-11 11:34:04 +05:30
neo-pm8010.dtsi
ARM: dts: msm: Add Leica2 and Leica PMIC for NEO SG
2022-05-11 11:34:04 +05:30
neo-pmic-overlay.dtsi
Merge "ARM: dts: msm: Update ADC configuration for wlan_therm"
2022-06-08 00:16:00 -07:00
neo-qupv3.dtsi
ARM: dts: msm: add pull-up for spi cs pin
2022-05-04 08:11:47 -07:00
neo-qxr-overlay.dts
ARM: dts: msm: Add initial device tree for NEO QXR
2022-03-14 18:19:58 +08:00
neo-qxr.dts
ARM: dts: msm: Add initial device tree for NEO QXR
2022-03-14 18:19:58 +08:00
neo-qxr.dtsi
ARM: dts: msm: Add AW2016 LED device nodes for aurora-qxr platforms
2022-05-30 19:03:49 +05:30
neo-regulators.dtsi
Merge "ARM: dts: msm: Remove L4A from neo platforms"
2022-04-22 12:55:57 -07:00
neo-reserved-memory.dtsi
ARM: dts: msm: Change video mem region from 7MB to 5MB
2022-03-15 02:14:01 +05:30
neo-rumi-overlay.dts
ARM: dts: msm: Add initial base changes for neo
2021-10-01 14:07:20 +05:30
neo-rumi.dts
ARM: dts: msm: Update board id for neo
2021-11-18 14:47:06 +05:30
neo-rumi.dtsi
ARM: dts: msm: Add support for RPMHCC clock controller on NEO
2022-03-01 19:01:38 +05:30
neo-sg-idp-overlay.dts
ARM: dts: msm: Add Leica2 and Leica PMIC for NEO SG
2022-05-11 11:34:04 +05:30
neo-sg-idp-pm8008-overlay.dts
ARM: dts: msm: Add device tree for Neo SG IDP pm8008 platform
2022-05-06 17:34:45 +05:30
neo-sg-idp-pm8008.dts
ARM: dts: msm: Add device tree for Neo SG IDP pm8008 platform
2022-05-06 17:34:45 +05:30
neo-sg-idp-pm8008.dtsi
ARM: dts: msm: Add Leica2 and Leica PMIC for NEO SG
2022-05-11 11:34:04 +05:30
neo-sg-idp.dts
ARM: dts: msm: Add Leica2 and Leica PMIC for NEO SG
2022-05-11 11:34:04 +05:30
neo-sg-idp.dtsi
ARM: dts: msm: Update ADC configuration for wlan_therm
2022-05-20 14:56:36 +05:30
neo-stub-regulator.dtsi
ARM: dts: msm: Update stub regulators for neo
2022-01-03 17:35:23 +05:30
neo-thermal-overlay.dtsi
ARM: dts: msm: Add pmic die temperature based mitigation for neo
2022-03-27 21:25:16 -07:00
neo-thermal.dtsi
ARM: dts: qcom: Enable support for cooling devices for neo
2022-03-04 09:19:20 +05:30
neo-usb.dtsi
ARM: dts: msm: Update vdd voltage on QMP phy to 0.88V on Neo
2022-06-15 06:04:27 -07:00
neo.dts
ARM: dts: msm: Add initial base changes for neo
2021-10-01 14:07:20 +05:30
neo.dtsi
Merge "ARM: dts: msm: Add va minidump node for neo"
2022-06-06 03:50:37 -07:00
parrot-4gb.dts
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-4gb.dtsi
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-atp-overlay.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrot-atp.dts
ARM: dts: msm: Include base parrot DT in dts
2022-06-02 16:02:08 +05:30
parrot-atp.dtsi
ARM: dts: msm: Remove voltage-level properties for eMMC on parrot
2022-05-27 12:05:33 +05:30
parrot-coresight.dtsi
ARM: dts: msm: disable dl-south-cmb tpdm on parrot
2022-05-31 23:49:37 -07:00
parrot-debug.dtsi
ARM: dts: msm: add dcc config lists for parrot
2022-05-18 13:47:40 +08:00
parrot-dma-heaps.dtsi
dt-bindings: Add qseecom and smcinvoke node for parrot dt
2022-04-20 19:56:52 +05:30
parrot-gpu.dtsi
ARM: dts: qcom: Document the DDR corners in Parrot
2022-06-10 11:58:22 +05:30
parrot-idp-4gb-overlay.dts
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-idp-4gb.dts
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-idp-4gb.dtsi
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-idp-nopmi-overlay.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrot-idp-nopmi.dts
ARM: dts: msm: Include base parrot DT in dts
2022-06-02 16:02:08 +05:30
parrot-idp-overlay.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrot-idp-pm7250b.dtsi
ARM: dts: msm: Add UCSI connector to USB port on Parrot
2022-05-16 12:33:33 +05:30
parrot-idp-wcn3990-4gb-overlay.dts
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-idp-wcn3990-4gb.dts
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-idp-wcn3990-4gb.dtsi
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-idp-wcn3990-amoled-rcm-4gb-overlay.dts
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-idp-wcn3990-amoled-rcm-4gb.dts
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-idp-wcn3990-amoled-rcm-4gb.dtsi
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-idp-wcn3990-amoled-rcm-overlay.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrot-idp-wcn3990-amoled-rcm.dts
ARM: dts: msm: Include base parrot DT in dts
2022-06-02 16:02:08 +05:30
parrot-idp-wcn3990-amoled-rcm.dtsi
ARM: dts: msm: update touch enteries for parrot
2022-05-02 12:41:37 +05:30
parrot-idp-wcn3990-overlay.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrot-idp-wcn3990.dts
ARM: dts: msm: Include base parrot DT in dts
2022-06-02 16:02:08 +05:30
parrot-idp-wcn3990.dtsi
ARM: dts: msm: Add initial device tree for Parrot
2022-03-10 12:30:45 +05:30
parrot-idp-wcn6750-amoled-4gb-overlay.dts
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-idp-wcn6750-amoled-4gb.dts
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-idp-wcn6750-amoled-4gb.dtsi
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-idp-wcn6750-amoled-overlay.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrot-idp-wcn6750-amoled-rcm-4gb-overlay.dts
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-idp-wcn6750-amoled-rcm-4gb.dts
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-idp-wcn6750-amoled-rcm-4gb.dtsi
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-idp-wcn6750-amoled-rcm-overlay.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrot-idp-wcn6750-amoled-rcm.dts
ARM: dts: msm: Include base parrot DT in dts
2022-06-02 16:02:08 +05:30
parrot-idp-wcn6750-amoled-rcm.dtsi
ARM: dts: msm: update touch enteries for parrot
2022-05-02 12:41:37 +05:30
parrot-idp-wcn6750-amoled.dts
ARM: dts: msm: Include base parrot DT in dts
2022-06-02 16:02:08 +05:30
parrot-idp-wcn6750-amoled.dtsi
ARM: dts: msm: update touch enteries for parrot
2022-05-02 12:41:37 +05:30
parrot-idp.dts
ARM: dts: msm: Include base parrot DT in dts
2022-06-02 16:02:08 +05:30
parrot-idp.dtsi
ARM: dts: msm: Remove voltage-level properties for eMMC on parrot
2022-05-27 12:05:33 +05:30
parrot-pinctrl.dtsi
ARM: dts: msm: Remove I3C qup instance in parrot
2022-06-13 11:54:41 +05:30
parrot-pm7250b.dtsi
ARM: dts: msm: Update thermistors for parrot
2022-04-14 16:52:40 +05:30
parrot-pmic-overlay.dtsi
ARM: dts: msm: Lower L4J min voltage to fix parent S8E voltage
2022-06-07 10:37:05 +05:30
parrot-qrd-4gb-overlay.dts
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-qrd-4gb.dts
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-qrd-4gb.dtsi
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-qrd-nopmi-overlay.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrot-qrd-nopmi.dts
ARM: dts: msm: Include base parrot DT in dts
2022-06-02 16:02:08 +05:30
parrot-qrd-overlay.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrot-qrd-pm7250b.dtsi
ARM: dts: msm: Add UCSI connector to USB port on Parrot
2022-05-16 12:33:33 +05:30
parrot-qrd-wcn6750-4gb-overlay.dts
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-qrd-wcn6750-4gb.dts
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-qrd-wcn6750-4gb.dtsi
ARM: dts: msm: Add DT for Parrot 4GB support
2022-05-27 17:48:45 +05:30
parrot-qrd-wcn6750-overlay.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrot-qrd-wcn6750.dts
ARM: dts: msm: Include base parrot DT in dts
2022-06-02 16:02:08 +05:30
parrot-qrd-wcn6750.dtsi
ARM: dts: msm: Add initial device tree for Parrot
2022-03-10 12:30:45 +05:30
parrot-qrd.dts
ARM: dts: msm: Include base parrot DT in dts
2022-06-02 16:02:08 +05:30
parrot-qrd.dtsi
ARM: dts: msm: Remove voltage-level properties for eMMC on parrot
2022-05-27 12:05:33 +05:30
parrot-qupv3.dtsi
ARM: dts: msm: Remove I3C qup instance in parrot
2022-06-13 11:54:41 +05:30
parrot-regulators.dtsi
ARM: dts: msm: Remove min/max voltages for LDO24B for parrot
2022-05-13 16:40:26 +05:30
parrot-reserved-memory.dtsi
ARM: dts: msm: Removing EVA memory size for parrot
2022-06-16 14:21:10 +05:30
parrot-rumi-overlay.dts
ARM: dts: qcom: Reorganize device tree for Parrot
2022-05-19 19:29:20 +05:30
parrot-rumi.dts
ARM: dts: msm: Include base parrot DT in dts
2022-06-02 16:02:08 +05:30
parrot-rumi.dtsi
ARM: dts: msm: Enable smmu fastmap for parrot
2022-04-19 12:59:35 +05:30
parrot-stub-regulator.dtsi
ARM: dts: msm: Update stub regulator values for parrot
2021-12-20 15:37:28 +05:30
parrot-thermal-overlay.dtsi
ARM: dts: msm: Add cooling device mapping for bcl for parrot
2022-03-29 09:05:57 +05:30
parrot-thermal.dtsi
ARM: dts: qcom: Add new thermal zone for nsp sensor
2022-06-03 09:13:02 +05:30
parrot-usb.dtsi
Merge "ARM: dts: msm: Add ref_clk to PHY node for diwali/cape/waipio/parrot"
2022-05-09 00:55:50 -07:00
parrot-vm-atp.dts
ARM: dts: msm: Add platform specific DT for Parrot VM
2022-05-15 13:56:45 +05:30
parrot-vm-atp.dtsi
ARM: dts: msm: Add platform specific DT for Parrot VM
2022-05-15 13:56:45 +05:30
parrot-vm-idp-wcn3990-amoled-rcm.dts
ARM: dts: msm: Add platform specific DT for Parrot VM
2022-05-15 13:56:45 +05:30
parrot-vm-idp-wcn3990-amoled-rcm.dtsi
ARM: dts: msm: Add svm support to ParrotP
2022-06-06 12:19:44 +05:30
parrot-vm-idp-wcn3990.dts
ARM: dts: msm: Add platform specific DT for Parrot VM
2022-05-15 13:56:45 +05:30
parrot-vm-idp-wcn3990.dtsi
ARM: dts: msm: include parrot-vm-idp in wcn3990 idp platform
2022-05-30 10:33:55 +05:30
parrot-vm-idp-wcn6750-amoled-rcm.dts
ARM: dts: msm: Add platform specific DT for Parrot VM
2022-05-15 13:56:45 +05:30
parrot-vm-idp-wcn6750-amoled-rcm.dtsi
ARM: dts: msm: Add svm support to ParrotP
2022-06-06 12:19:44 +05:30
parrot-vm-idp-wcn6750-amoled.dts
ARM: dts: msm: Add platform specific DT for Parrot VM
2022-05-15 13:56:45 +05:30
parrot-vm-idp-wcn6750-amoled.dtsi
ARM: dts: msm: Add svm support to ParrotP
2022-06-06 12:19:44 +05:30
parrot-vm-idp.dts
ARM: dts: msm: Add platform specific DT for Parrot VM
2022-05-15 13:56:45 +05:30
parrot-vm-idp.dtsi
ARM: dts: msm: enable secure touch on parrot SVM
2022-05-21 14:06:03 +05:30
parrot-vm-qrd-wcn6750.dts
ARM: dts: msm: Include base parrot DT in dts
2022-06-02 16:02:08 +05:30
parrot-vm-qrd-wcn6750.dtsi
ARM: dts: msm: Add svm support to ParrotP
2022-06-06 12:19:44 +05:30
parrot-vm-qrd.dts
ARM: dts: msm: Add platform specific DT for Parrot VM
2022-05-15 13:56:45 +05:30
parrot-vm-qrd.dtsi
ARM: dts: msm: Add platform specific DT for Parrot VM
2022-05-15 13:56:45 +05:30
parrot-vm-rumi.dts
ARM: dts: msm: add initial dt files to support Parrot VM
2022-01-24 18:53:24 +05:30
parrot-vm-rumi.dtsi
ARM: dts: msm: add initial dt files to support Parrot VM
2022-01-24 18:53:24 +05:30
parrot-vm.dtsi
ARM: dts: msm: Add svm support to ParrotP
2022-06-06 12:19:44 +05:30
parrot-wcn3990.dtsi
ARM: dts: msm: Add geometry aperture changes for parrot
2022-06-08 19:44:01 +05:30
parrot-wcn6750.dtsi
ARM: dts: msm: Add tsens property to icnss2 node
2022-06-14 10:49:19 +05:30
parrot.dts
ARM: dts: msm: Add initial device tree for Parrot
2021-09-20 11:02:37 +05:30
parrot.dtsi
ARM: dts: msm: disable zone dma on parrot
2022-07-01 14:41:14 +05:30
parrotp-atp.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrotp-atp.dtsi
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrotp-idp-nopmi.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrotp-idp-wcn3990-amoled-rcm.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrotp-idp-wcn3990-amoled-rcm.dtsi
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrotp-idp-wcn3990.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrotp-idp-wcn3990.dtsi
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrotp-idp-wcn6750-amoled-rcm.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrotp-idp-wcn6750-amoled-rcm.dtsi
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrotp-idp-wcn6750-amoled.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrotp-idp-wcn6750-amoled.dtsi
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrotp-idp.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrotp-idp.dtsi
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrotp-qrd-nopmi.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrotp-qrd-wcn6750.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrotp-qrd-wcn6750.dtsi
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrotp-qrd.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrotp-qrd.dtsi
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrotp.dts
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
parrotp.dtsi
ARM: dts: qcom: Add APQ variant device trees for Parrot
2022-06-06 11:22:09 +05:30
pm6150l-rpm-regulator.dtsi
ARM: dts: msm: Update PM6150a BOB configuration
2020-07-29 10:38:39 +05:30
pm6150l.dtsi
ARM: dts: msm: Add PMIC support for parrot
2022-03-20 21:32:15 -07:00
pm6350-rpm-regulator.dtsi
ARM: dts: msm: Add pm6350 and pm6150l rpm-smd regulators for holi
2020-06-12 14:21:43 +05:30
pm6350.dtsi
ARM: dts: qcom: Update PMIC support for holi
2020-08-02 10:24:18 +05:30
pm6450.dtsi
ARM: dts: msm: Add support for PM6450
2022-03-03 11:25:42 +05:30
pm7250b.dtsi
ARM: dts: qcom: Remove thermal-engine specific trip from pmic alarm tzones
2022-02-21 13:41:29 +05:30
pm7325.dtsi
ARM: dts: qcom: Remove thermal-engine specific trip from pmic alarm tzones
2022-02-21 13:41:29 +05:30
pm8150.dtsi
ARM: dts: msm: Enable KPDPWR status logging
2022-05-30 16:45:04 +05:30
pm8350.dtsi
ARM: dts: qcom: Remove thermal-engine specific trip from pmic alarm tzones
2022-02-21 13:41:29 +05:30
pm8350b.dtsi
ARM: dts: qcom: Update socd thermal zone rules for waipio
2022-03-16 10:39:40 +08:00
pm8350c.dtsi
ARM: dts: qcom: Remove thermal-engine specific trip from pmic alarm tzones
2022-02-21 13:41:29 +05:30
pm8450.dtsi
ARM: dts: qcom: Remove thermal-engine specific trip from pmic alarm tzones
2022-02-21 13:41:29 +05:30
pmk8350.dtsi
ARM: dts: msm: Enable KPDPWR status logging
2022-01-04 14:50:13 +05:30
pmr735a.dtsi
ARM: dts: qcom: Remove thermal-engine specific trip from pmic alarm tzones
2022-02-21 13:41:29 +05:30
pmr735b.dtsi
ARM: dts: qcom: Remove thermal-engine specific trip from pmic alarm tzones
2022-02-21 13:41:29 +05:30
pmx65.dtsi
ARM: dts: msm: Add PMX65 PMIC devices
2020-08-19 12:06:52 -07:00
qg-batterydata-alium-3600mah.dtsi
ARM: dts: msm: Add SMB5 charger and QG on PM7250b for holi
2020-08-26 20:55:11 +05:30
qg-batterydata-atl466271_3300mAh.dtsi
ARM: dts: msm: Add SMB5 charger and QG on PM7250b for holi
2020-08-26 20:55:11 +05:30
qg-batterydata-atl436186020H_3780mAh.dtsi
ARM: dts: msm: Add SMB5 charger and QG on PM7250b for holi
2020-08-26 20:55:11 +05:30
ravelin-cdp-overlay.dts
ARM: dts: msm: Add initial device tree for Ravelin
2022-04-26 13:54:03 +08:00
ravelin-cdp.dts
ARM: dts: msm: Add initial device tree for Ravelin
2022-04-26 13:54:03 +08:00
ravelin-cdp.dtsi
ARM: dts: msm: Add initial device tree for Ravelin
2022-04-26 13:54:03 +08:00
ravelin-dma-heaps.dtsi
ARM: dts: msm: Add initial dmabuf heaps for ravelin
2022-05-20 14:44:56 +08:00
ravelin-mtp-overlay.dts
ARM: dts: msm: Add initial device tree for Ravelin
2022-04-26 13:54:03 +08:00
ravelin-mtp.dts
ARM: dts: msm: Add initial device tree for Ravelin
2022-04-26 13:54:03 +08:00
ravelin-mtp.dtsi
ARM: dts: msm: Add initial device tree for Ravelin
2022-04-26 13:54:03 +08:00
ravelin-pinctrl.dtsi
ARM: dts: msm: Add pinctrl node for TLMM on Ravelin SoC
2022-05-25 22:41:42 -07:00
ravelin-qrd-overlay.dts
ARM: dts: msm: Add initial device tree for Ravelin
2022-04-26 13:54:03 +08:00
ravelin-qrd.dts
ARM: dts: msm: Add initial device tree for Ravelin
2022-04-26 13:54:03 +08:00
ravelin-qrd.dtsi
ARM: dts: msm: Add initial device tree for Ravelin
2022-04-26 13:54:03 +08:00
ravelin-reserved-memory.dtsi
ARM: dts: msm: add memory region for ravelin
2022-05-17 20:45:42 +08:00
ravelin-rumi-overlay.dts
ARM: dts: msm: Add initial device tree for Ravelin
2022-04-26 13:54:03 +08:00
ravelin-rumi.dts
ARM: dts: msm: Add initial device tree for Ravelin
2022-04-26 13:54:03 +08:00
ravelin-rumi.dtsi
ARM: dts: msm: Add initial device tree for Ravelin
2022-04-26 13:54:03 +08:00
ravelin-stub-regulator.dtsi
ARM: dts: msm: Add stub regulators for ravelin
2022-05-11 22:23:48 +05:30
ravelin.dts
ARM: dts: msm: Add initial device tree for Ravelin
2022-04-26 13:54:03 +08:00
ravelin.dtsi
Merge "ARM: dts: msm: add membuf dt nodes for ravelin"
2022-06-15 05:54:18 -07:00
sdxlemur-cdp.dts
ARM: dts: msm: Add initial devicetrees for SDXLEMUR target
2020-06-22 22:12:42 -07:00
sdxlemur-cdp.dtsi
ARM: dts: msm: Add PMIC overlay to sdxlemur platforms
2020-08-19 13:32:12 -07:00
sdxlemur-coresight.dtsi
ARM: dts: msm: add qdss device tree on sdxlemur
2020-08-18 20:00:13 +08:00
sdxlemur-external-soc.dtsi
ARM: dts: msm: Add initial support for waipio+sdxlemur
2021-04-30 14:59:44 -07:00
sdxlemur-ion.dtsi
ARM: dts: msm: Add ion device for sdxlemur
2020-07-20 16:38:03 -07:00
sdxlemur-mtp.dts
ARM: dts: msm: Add initial devicetrees for SDXLEMUR target
2020-06-22 22:12:42 -07:00
sdxlemur-mtp.dtsi
ARM: dts: msm: Add PMIC overlay to sdxlemur platforms
2020-08-19 13:32:12 -07:00
sdxlemur-pcie.dtsi
ARM: dts: msm: update phandle for pcie_pipe_clk_ext_src for sdxlemur
2020-09-03 11:01:49 -07:00
sdxlemur-pinctrl.dtsi
ARM: dts: msm: add initial devicetree nodes for PCIe RC on sdxlemur
2020-08-27 09:15:56 -07:00
sdxlemur-pm.dtsi
ARM: dts: msm: Add power management devices for sdxlemur
2020-07-21 10:55:28 +05:30
sdxlemur-pmic-overlay.dtsi
ARM: dts: msm: Add PMIC overlay to sdxlemur platforms
2020-08-19 13:32:12 -07:00
sdxlemur-rumi.dts
ARM: dts: msm: Add initial devicetrees for SDXLEMUR target
2020-06-22 22:12:42 -07:00
sdxlemur-rumi.dtsi
ARM: dts: msm: Add PMIC overlay to sdxlemur platforms
2020-08-19 13:32:12 -07:00
sdxlemur-stub-regulator.dtsi
ARM: dts: msm: Include sdxlemur stub regulator
2020-06-26 02:31:42 -07:00
sdxlemur-usb.dtsi
ARM: dts: msm: Remove qcom,dwc-usb3-msm-tx-fifo-size property
2022-01-21 06:29:43 +05:30
sdxlemur.dtsi
ARM: dts: msm: Update mc_virt interconnect node for SDXLEMUR
2020-09-02 22:45:54 -07:00
shima-atp-overlay.dts
ARM: dts: msm: Add initial device tree for Shima for IDP/ATP
2020-07-07 00:59:48 -07:00
shima-atp.dts
ARM: dts: msm: Add initial device tree for Shima for IDP/ATP
2020-07-07 00:59:48 -07:00
shima-atp.dtsi
ARM: dts: msm: PMIIC regulator and platform update for shima
2020-09-01 10:39:52 -07:00
shima-audio-overlay.dtsi
ARM: dts: qcom: add wsa base address to pkd reg
2020-09-09 18:17:21 +05:30
shima-audio.dtsi
ARM: dts: msm: Add support of cma heap
2020-09-01 00:41:58 +05:30
shima-coresight.dtsi
ARM: dts: msm: Modify reset cti to cti6 for shima
2020-08-24 15:14:43 +08:00
shima-cvp.dtsi
ARM: dts: msm: Add cvp device for shima
2020-08-06 15:52:42 +05:30
shima-gdsc.dtsi
ARM: dts: msm: Update the flags for GCC PCIE GDSC's
2020-09-14 14:37:56 +05:30
shima-gpu.dtsi
Merge "ARM: dts: msm: Update GPU Fmax to 676MHz for Shima default and AC SKU"
2020-08-28 07:15:57 -07:00
shima-idp-overlay.dts
ARM: dts: msm: Add initial device tree for Shima for IDP/ATP
2020-07-07 00:59:48 -07:00
shima-idp.dts
ARM: dts: msm: Add initial device tree for Shima for IDP/ATP
2020-07-07 00:59:48 -07:00
shima-idp.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
shima-idps-digital-mics-overlay.dts
ARM: dts: msm: Add device tree for Shima for IDPS with digital mics
2020-08-05 04:56:46 -07:00
shima-idps-digital-mics.dts
ARM: dts: msm: Add device tree for Shima for IDPS with digital mics
2020-08-05 04:56:46 -07:00
shima-idps-digital-mics.dtsi
Merge "ARM: dts: msm: Enable btfm for shima"
2020-08-31 03:20:21 -07:00
shima-ion.dtsi
ARM: dts: msm: Update the system heap type on all targets
2020-10-07 13:34:39 -07:00
shima-lpi.dtsi
ARM: dts: msm: Add audio specific dt files for shima
2020-07-15 00:41:58 -07:00
shima-pcie.dtsi
ARM: dts: msm: Add handles for PCIE clocks
2020-09-08 10:45:58 +05:30
shima-pinctrl.dtsi
ARM: dts: msm: Add I2C NFC device node for shima
2020-08-25 07:58:10 -07:00
shima-pm.dtsi
ARM: dts: msm: Add disable IPI prediction for all targets
2020-06-04 15:02:52 +05:30
shima-pmic-overlay.dtsi
ARM: dts: msm: Enable KPDPWR status logging
2022-01-04 14:50:13 +05:30
shima-qrd-overlay.dts
ARM: dts: msm: Add initial device tree for Shima for QRD
2020-07-10 14:37:05 +08:00
shima-qrd.dts
ARM: dts: msm: Add initial device tree for Shima for QRD
2020-07-10 14:37:05 +08:00
shima-qrd.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
shima-qupv3.dtsi
ARM: dts: msm: Define console before other QUP devices on shima
2020-08-17 17:42:42 +05:30
shima-regulators.dtsi
ARM: dts: msm: add proxy votes for display regulators on Shima
2020-09-05 11:39:38 -07:00
shima-rumi-overlay.dts
…
shima-rumi.dts
…
shima-rumi.dtsi
ARM: dts: msm: Disable eMMC for shima
2020-08-06 21:33:12 +05:30
shima-stub-regulator.dtsi
…
shima-thermal-overlay.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
shima-thermal.dtsi
ARM: dts: qcom: Add PMIC and GPU config thermal zones for SHIMA
2020-08-14 00:03:53 +05:30
shima-usb.dtsi
ARM: dts: msm: Remove qcom,dwc-usb3-msm-tx-fifo-size property
2022-01-21 06:29:43 +05:30
shima-vidc.dtsi
ARM: dts: msm: Add DMA coherency hint for shima
2020-09-11 15:36:19 +05:30
shima-vm-atp.dts
ARM: dts: msm: Add Shima trustedVM device configuration
2020-08-28 12:43:50 +05:30
shima-vm-atp.dtsi
ARM: dts: msm: Add Shima trustedVM device configuration
2020-08-28 12:43:50 +05:30
shima-vm-idp.dts
ARM: dts: msm: Add Shima trustedVM device configuration
2020-08-28 12:43:50 +05:30
shima-vm-idp.dtsi
ARM: dts: msm: Add Shima trustedVM device configuration
2020-08-28 12:43:50 +05:30
shima-vm-qrd.dts
ARM: dts: msm: Add Shima trustedVM device configuration
2020-08-28 12:43:50 +05:30
shima-vm-qrd.dtsi
ARM: dts: msm: Add Shima trustedVM device configuration
2020-08-28 12:43:50 +05:30
shima-vm-rumi.dts
ARM: dts: msm: Add Shima trustedVM device configuration
2020-08-28 12:43:50 +05:30
shima-vm-rumi.dtsi
ARM: dts: msm: Add Shima trustedVM device configuration
2020-08-28 12:43:50 +05:30
shima-vm.dtsi
ARM: dts: msm: updates the shima VM ION same as lahaina
2020-09-03 09:33:32 +05:30
shima.dts
…
shima.dtsi
ARM: dts: msm: Merge kernel.lnx.5.4-200915 into msm-5.10
2020-12-17 06:33:10 -08:00
smb1398.dtsi
ARM: dts: msm: Enable smb1398 on holi MTP and QRD
2020-09-11 18:43:06 -07:00
waipio-68disp.dtsi
ARM: dts: msm: add goodix touch support on mtp platform of Waipio
2022-05-18 01:03:22 -07:00
waipio-atp-pm8008-overlay.dts
ARM: dts: qcom: Add Waipio LTE variant base device trees
2022-01-11 23:34:59 -08:00
waipio-atp-pm8008.dts
ARM: dts: msm: Add ATP platform support for waipio SoC
2021-03-05 11:22:20 -08:00
waipio-atp-pm8010-overlay.dts
ARM: dts: qcom: Add Waipio LTE variant base device trees
2022-01-11 23:34:59 -08:00
waipio-atp-pm8010.dts
ARM: dts: msm: Add ATP platform support for waipio SoC
2021-03-05 11:22:20 -08:00
waipio-atp.dtsi
ARM: dts: msm: Add ATP platform support for waipio SoC
2021-03-05 11:22:20 -08:00
waipio-cdp-pm8008-overlay.dts
ARM: dts: qcom: Add Waipio LTE variant base device trees
2022-01-11 23:34:59 -08:00
waipio-cdp-pm8008.dts
ARM: dts: qcom: support PM8008 vs PM8010 detection for Waipio boards
2021-02-11 12:32:36 -08:00
waipio-cdp-pm8010-overlay.dts
ARM: dts: qcom: Add Waipio LTE variant base device trees
2022-01-11 23:34:59 -08:00
waipio-cdp-pm8010.dts
ARM: dts: qcom: support PM8008 vs PM8010 detection for Waipio boards
2021-02-11 12:32:36 -08:00
waipio-cdp.dtsi
ARM: dts: msm: use TLMM to reference trusted touch GPIOs
2021-11-17 16:51:19 +05:30
waipio-clock.dtsi
ARM: dts: msm: Add debugcc clock phandles for Waipio
2021-10-22 12:59:54 -07:00
waipio-coresight.dtsi
ARM: dts: msm: Add spmi tgu for cape
2022-05-26 02:15:56 -07:00
waipio-debug.dtsi
ARM: dts: msm: remove scandump entry
2022-04-19 20:03:25 +08:00
waipio-dma-heaps.dtsi
ARM: dts: msm: Add demura heap for waipio
2021-09-02 19:01:42 -07:00
waipio-eva.dtsi
ARM: dts: msm: Remove lowest EVA freq
2021-05-24 10:28:52 -07:00
waipio-gpu.dtsi
Merge "ARM: dts: msm: Add RDPM register map for Waipio GPU"
2021-09-23 14:23:12 -07:00
waipio-hdk.dtsi
ARM: dts: qcom: Add touchscreen for WaipioP HDK
2021-08-31 00:55:35 -07:00
waipio-kiwi-cdp-pm8008-overlay.dts
ARM: dts: msm: Add waipio w/kiwi CDPs
2021-10-26 16:43:23 -07:00
waipio-kiwi-cdp-pm8010-overlay.dts
ARM: dts: msm: Add waipio w/kiwi CDPs
2021-10-26 16:43:23 -07:00
waipio-kiwi-mtp-pm8008-overlay.dts
ARM: dts: msm: Add support for Waipio MTP Subtype 4
2021-09-27 20:37:43 -07:00
waipio-kiwi-mtp-pm8010-overlay.dts
ARM: dts: msm: Add support for Waipio MTP Subtype 4
2021-09-27 20:37:43 -07:00
waipio-kiwi.dtsi
ARM: dts: msm: Add PDC configuration for WLAN device
2022-04-11 13:42:18 -07:00
waipio-lemur-cdp-pm8008-overlay.dts
ARM: dts: msm: Add waipio APQ msm-ids to esoc overlays
2021-07-16 08:11:37 -07:00
waipio-lemur-cdp-pm8010-overlay.dts
ARM: dts: msm: Add waipio APQ msm-ids to esoc overlays
2021-07-16 08:11:37 -07:00
waipio-lemur-mtp-pm8008-overlay.dts
ARM: dts: msm: Add waipio APQ msm-ids to esoc overlays
2021-07-16 08:11:37 -07:00
waipio-lemur-mtp-pm8010-overlay.dts
ARM: dts: msm: Add waipio APQ msm-ids to esoc overlays
2021-07-16 08:11:37 -07:00
waipio-lemur.dtsi
ARM: dts: msm: Add gen speed mismatch panic boolean for waipio-lemur
2022-03-22 14:29:11 -07:00
waipio-lte-atp-pm8008.dts
ARM: dts: qcom: Add Waipio LTE variant base device trees
2022-01-11 23:34:59 -08:00
waipio-lte-atp-pm8010.dts
ARM: dts: qcom: Add Waipio LTE variant base device trees
2022-01-11 23:34:59 -08:00
waipio-lte-cdp-pm8008.dts
ARM: dts: qcom: Add Waipio LTE variant base device trees
2022-01-11 23:34:59 -08:00
waipio-lte-cdp-pm8010.dts
ARM: dts: qcom: Add Waipio LTE variant base device trees
2022-01-11 23:34:59 -08:00
waipio-lte-mtp-pm8008.dts
ARM: dts: qcom: Add Waipio LTE variant base device trees
2022-01-11 23:34:59 -08:00
waipio-lte-mtp-pm8010.dts
ARM: dts: qcom: Add Waipio LTE variant base device trees
2022-01-11 23:34:59 -08:00
waipio-lte-qrd-pm8008.dts
ARM: dts: qcom: Add Waipio LTE variant base device trees
2022-01-11 23:34:59 -08:00
waipio-lte-qrd-pm8010.dts
ARM: dts: qcom: Add Waipio LTE variant base device trees
2022-01-11 23:34:59 -08:00
waipio-lte-vm-cdp.dts
ARM: dts: qcom: Add Waipio LTE vm base device trees
2022-01-19 03:29:44 -08:00
waipio-lte-vm-cdp.dtsi
ARM: dts: qcom: Add Waipio LTE vm base device trees
2022-01-19 03:29:44 -08:00
waipio-lte-vm-mtp.dts
ARM: dts: qcom: Add Waipio LTE vm base device trees
2022-01-19 03:29:44 -08:00
waipio-lte-vm-mtp.dtsi
ARM: dts: qcom: Add Waipio LTE vm base device trees
2022-01-19 03:29:44 -08:00
waipio-lte-vm-qrd.dts
ARM: dts: qcom: Add Waipio LTE vm base device trees
2022-01-19 03:29:44 -08:00
waipio-lte-vm-qrd.dtsi
ARM: dts: qcom: Add Waipio LTE vm base device trees
2022-01-19 03:29:44 -08:00
waipio-lte-vm.dtsi
ARM: dts: qcom: Add Waipio LTE vm base device trees
2022-01-19 03:29:44 -08:00
waipio-lte.dts
ARM: dts: qcom: Add Waipio LTE variant base device trees
2022-01-11 23:34:59 -08:00
waipio-lte.dtsi
ARM: dts: qcom: Add Waipio LTE variant base device trees
2022-01-11 23:34:59 -08:00
waipio-mtp-68disp-pm8008-overlay.dts
ARM: dts: qcom: Add device trees for 6.8 Inch Display Waipio MTP
2022-05-17 22:43:58 -07:00
waipio-mtp-68disp-pm8010-overlay.dts
ARM: dts: qcom: Add device trees for 6.8 Inch Display Waipio MTP
2022-05-17 22:43:58 -07:00
waipio-mtp-pm8008-overlay.dts
ARM: dts: qcom: Add Waipio LTE variant base device trees
2022-01-11 23:34:59 -08:00
waipio-mtp-pm8008.dts
ARM: dts: qcom: support PM8008 vs PM8010 detection for Waipio boards
2021-02-11 12:32:36 -08:00
waipio-mtp-pm8010-overlay.dts
ARM: dts: qcom: Add Waipio LTE variant base device trees
2022-01-11 23:34:59 -08:00
waipio-mtp-pm8010.dts
ARM: dts: qcom: support PM8008 vs PM8010 detection for Waipio boards
2021-02-11 12:32:36 -08:00
waipio-mtp.dtsi
Merge "ARM: dts: msm: add synaptics tcm touch node for waipio"
2021-10-27 17:17:41 -07:00
waipio-pcie.dtsi
Merge "ARM: dts: msm: Add PCIe PHY, PARF and DBI status registers for Hang event"
2022-02-27 22:32:53 -08:00
waipio-pinctrl.dtsi
Merge "ARM: dts: msm: Add pinctrl for SOL GPIOs for kiwi platform"
2022-03-06 22:10:15 -08:00
waipio-pm8008.dtsi
ARM: dts: qcom: disallow PM8008 and PM8010 LDO LPM usage for Waipio boards
2021-08-20 17:40:43 -07:00
waipio-pm8010-i2c.dtsi
ARM: dts: qcom: disallow PM8008 and PM8010 LDO LPM usage for Waipio boards
2021-08-20 17:40:43 -07:00
waipio-pm8010-spmi.dtsi
ARM: dts: qcom: Remove thermal-engine specific trip from pmic alarm tzones
2022-02-21 13:41:29 +05:30
waipio-pmic-overlay.dtsi
ARM: dts: msm: Enable KPDPWR status logging
2022-01-04 14:50:13 +05:30
waipio-qrd-2s.dtsi
Revert "ARM: dts: msm: add shutdown voltage for Waipio platforms"
2021-10-14 12:40:27 -07:00
waipio-qrd-pm8008-overlay.dts
ARM: dts: qcom: Add Waipio LTE variant base device trees
2022-01-11 23:34:59 -08:00
waipio-qrd-pm8008.dts
ARM: dts: qcom: support PM8008 vs PM8010 detection for Waipio boards
2021-02-11 12:32:36 -08:00
waipio-qrd-pm8010-2s-overlay.dts
ARM: dts: msm: Add support for Waipio v2
2021-05-24 10:51:35 -07:00
waipio-qrd-pm8010-2s.dts
ARM: dts: qcom: Add initial device tree for Waipio 2S battery
2021-04-16 15:58:34 +08:00
waipio-qrd-pm8010-overlay.dts
ARM: dts: qcom: Add Waipio LTE variant base device trees
2022-01-11 23:34:59 -08:00
waipio-qrd-pm8010.dts
ARM: dts: qcom: support PM8008 vs PM8010 detection for Waipio boards
2021-02-11 12:32:36 -08:00
waipio-qrd.dtsi
ARM: dts: qcom: Update skin mitigation trips for waipio
2022-04-19 09:33:36 +05:30
waipio-qupv3.dtsi
ARM: dts: msm: Removing le-vm flag for LA dt node
2022-01-14 06:24:03 -08:00
waipio-regulators.dtsi
ARM: dts: qcom: reduce S3E min voltage for Waipio
2021-07-07 13:12:14 -07:00
waipio-rumi-overlay.dts
ARM: dts: msm: Add msm-id in board overlay files
2020-10-28 11:50:55 -07:00
waipio-rumi.dts
ARM: dts: msm: Set peripheral mode by default
2021-01-12 15:03:16 -08:00
waipio-rumi.dtsi
ARM: dts: msm: move audio devicetree node out of kernel
2021-04-12 08:45:28 +08:00
waipio-smp2p.dtsi
ARM: dts: msm: Add SMP2P node for waipio
2020-10-08 14:45:52 -07:00
waipio-thermal-modem.dtsi
ARM: dts: msm: Add additional thermal zones for sdr pa sensors
2022-06-03 09:48:15 +05:30
waipio-thermal-overlay.dtsi
ARM: dts: qcom: Update socd thermal zone rules for waipio
2022-03-16 10:39:40 +08:00
waipio-thermal.dtsi
Merge "ARM: dts: qcom: Update critical trip type to passive for taro"
2021-12-14 14:17:41 -08:00
waipio-usb.dtsi
ARM: dts: msm: Add ref_clk to PHY node for diwali/cape/waipio/parrot
2022-04-27 15:37:01 +05:30
waipio-v2-atp-pm8008.dts
ARM: dts: msm: Add support for Waipio v2
2021-05-24 10:51:35 -07:00
waipio-v2-atp-pm8010.dts
ARM: dts: msm: Add support for Waipio v2
2021-05-24 10:51:35 -07:00
waipio-v2-cdp-pm8008.dts
ARM: dts: msm: Add support for Waipio v2
2021-05-24 10:51:35 -07:00
waipio-v2-cdp-pm8010.dts
ARM: dts: msm: Add support for Waipio v2
2021-05-24 10:51:35 -07:00
waipio-v2-gpu.dtsi
Revert "ARM: dts: msm: Remove restriction for bus vote"
2022-03-02 10:35:04 -08:00
waipio-v2-mtp-pm8008.dts
ARM: dts: msm: Add support for Waipio v2
2021-05-24 10:51:35 -07:00
waipio-v2-mtp-pm8010.dts
ARM: dts: msm: Add support for Waipio v2
2021-05-24 10:51:35 -07:00
waipio-v2-qrd-pm8008.dts
ARM: dts: msm: Add support for Waipio v2
2021-05-24 10:51:35 -07:00
waipio-v2-qrd-pm8010-2s.dts
ARM: dts: msm: Add support for Waipio v2
2021-05-24 10:51:35 -07:00
waipio-v2-qrd-pm8010.dts
ARM: dts: msm: Add support for Waipio v2
2021-05-24 10:51:35 -07:00
waipio-v2.dts
ARM: dts: msm: Add support for Waipio v2
2021-05-24 10:51:35 -07:00
waipio-v2.dtsi
ARM: dts: qcom: enable NSP isense trim thermal zone and mitigation
2021-10-21 01:34:15 +05:30
waipio-vm-cdp.dts
ARM: dts: msm: add trusted touch properties for waipio-vm
2021-05-02 12:11:44 -07:00
waipio-vm-cdp.dtsi
ARM: dts: msm: use TLMM to reference trusted touch GPIOs on Waipio
2021-08-30 20:30:08 -04:00
waipio-vm-dma-heaps.dtsi
ARM: dts: msm: Add dma-heaps for waipio-tui
2021-03-08 16:40:29 -08:00
waipio-vm-mtp.dts
ARM: dts: msm: add trusted touch properties for waipio-vm
2021-05-02 12:11:44 -07:00
waipio-vm-mtp.dtsi
ARM: dts: msm: use TLMM to reference trusted touch GPIOs on Waipio
2021-08-30 20:30:08 -04:00
waipio-vm-qrd.dts
ARM: dts: msm: add touch properties for Waipio VM
2021-04-27 17:25:27 +08:00
waipio-vm-qrd.dtsi
ARM: dts: msm: use TLMM to reference trusted touch GPIOs on Waipio
2021-08-30 20:30:08 -04:00
waipio-vm-rumi.dts
ARM: dts: msm: add waipio vm rumi file
2021-02-16 11:32:52 -08:00
waipio-vm-rumi.dtsi
ARM: dts: msm: add waipio vm rumi file
2021-02-16 11:32:52 -08:00
waipio-vm.dtsi
ARM: dts: msm: Add SVM support to Waipiop platforms
2022-06-10 11:35:02 +05:30
waipio.dts
ARM: dts: msm: Add device tree overlay support for Waipio
2020-10-13 15:16:56 -07:00
waipio.dtsi
ARM: dts: msm: Add CMA area for the modem PAS on Waipio/parrot
2022-05-25 14:45:28 +05:30
waipiop-cdp-pm8008.dts
ARM: dts: msm: Add device trees for WaipioP SoC
2021-03-15 16:54:48 -07:00
waipiop-cdp-pm8010.dts
ARM: dts: msm: Add device trees for WaipioP SoC
2021-03-15 16:54:48 -07:00
waipiop-hdk-pm8010-overlay.dts
ARM: dts: qcom: Add initial device tree for WaipioP HDK
2021-06-17 14:54:50 +08:00
waipiop-hdk-pm8010.dts
ARM: dts: qcom: Add initial device tree for WaipioP HDK
2021-06-17 14:54:50 +08:00
waipiop-mtp-pm8008.dts
ARM: dts: msm: Add device trees for WaipioP SoC
2021-03-15 16:54:48 -07:00
waipiop-mtp-pm8010.dts
ARM: dts: msm: Add device trees for WaipioP SoC
2021-03-15 16:54:48 -07:00
waipiop-qrd-pm8008.dts
ARM: dts: msm: Add device trees for WaipioP SoC
2021-03-15 16:54:48 -07:00
waipiop-qrd-pm8010-2s.dts
ARM: dts: qcom: Add initial device tree for Waipio 2S battery
2021-04-16 15:58:34 +08:00
waipiop-qrd-pm8010.dts
ARM: dts: msm: Add device trees for WaipioP SoC
2021-03-15 16:54:48 -07:00
waipiop-v2-cdp-pm8008.dts
ARM: dts: msm: Add support for Waipio v2
2021-05-24 10:51:35 -07:00
waipiop-v2-cdp-pm8010.dts
ARM: dts: msm: Add support for Waipio v2
2021-05-24 10:51:35 -07:00
waipiop-v2-hdk-pm8010.dts
ARM: dts: qcom: Add initial device tree for WaipioP HDK
2021-06-17 14:54:50 +08:00
waipiop-v2-mtp-pm8008.dts
ARM: dts: msm: Add support for Waipio v2
2021-05-24 10:51:35 -07:00
waipiop-v2-mtp-pm8010.dts
ARM: dts: msm: Add support for Waipio v2
2021-05-24 10:51:35 -07:00
waipiop-v2-qrd-pm8008.dts
ARM: dts: msm: Add support for Waipio v2
2021-05-24 10:51:35 -07:00
waipiop-v2-qrd-pm8010-2s.dts
ARM: dts: msm: Add support for Waipio v2
2021-05-24 10:51:35 -07:00
waipiop-v2-qrd-pm8010.dts
ARM: dts: msm: Add support for Waipio v2
2021-05-24 10:51:35 -07:00
waipiop-v2.dts
ARM: dts: msm: Add support for Waipio v2
2021-05-24 10:51:35 -07:00
waipiop-v2.dtsi
ARM: dts: msm: Fix the waipiop-v2 dtsi file
2022-06-14 19:23:19 +05:30
waipiop.dts
ARM: dts: msm: Add device trees for WaipioP SoC
2021-03-15 16:54:48 -07:00
waipiop.dtsi
ARM: dts: msm: Add device trees for WaipioP SoC
2021-03-15 16:54:48 -07:00